Amount is not Determined while creating excise invoice

Dear Gurus,
I have created Excise invoice with reference to Billing Document F2.
In Sales order and Billing Doucment Pricing Procedures determine BED, SED, AED by using Factory Pricing Procedures Which is Condition Based.
But when I am creating excise invoice with reference to Billing Document, the value of BED, AED, SED will not coming.
I had also save the data in Logistic General - Tax on goods movement - india - determination of excise duty - condition based excise determination - classify condition types.
over here i maintained the data for my particular pricing procedure along with condition type which i am using.
May I know where is my mistake
Suneet Prakash

Hi Lakshmi,
I had also maintained this setting also but still its not coming in my excise invoice.
what will be the setting which basically activate that amount.
i dont know means upto billing i am able to see the excise duties
but in excise invoice its not showing.
one more thing what are these excise transaction types
why we require this. can i get some document regarding this.
document in which i will get the information about all the customising setting regarding CIN.
Please help me out.
Suneet.

Similar Messages

Error while creating Excise Invoice

Hi All,
Can any one help me on CIN?
I am getting one error while creating "Excise Invoice [T.code J1ILN]" i.e. "System failure during locking GL account Cocode by 13113910"
Regards
Chowdary

Dear Raghavendra
Please make a try with the following but I am not sure whether it will solve your problem.
Go to FS00, give the G/L account which has the problem and select "Control Data" tab. Here punch as asterisk in the field "Tax category" and save.
Now try to create the excise invoice.
Thanks
G. Lakshmipathi

8I 681 Error While Creating Excise Invoice

Dear All,
Am getting error 8I 681 error while creating excise invoice,when i analysed since in the document flow the delivery document is not there, only J delivery will be allowed in creating excise invoice.
Our client wants item level milestone,so in oder to activate that i have assigned the billing plan in the item category.But when i assighn the billing plan the system will not allow to put the billing relavance delivery relavant.So i made oder relavan in the billing relavance.So i create an oder and with that reference delivery.But when i create billing i have to refer the oder number,since in the item ctegory i have made oder relavant billing.So the result is in the billing document flow the delivery document is not flowing.Henceforth i could not be able to create J1IN.
But this was not happening in the sand box,but only in the quality since it is superior.when we debugged we found only J(Delivery) is allowed to create excise invoice.
Please help me to solve this issue,is there any possiblity to make the delivery document flow in the billing document.If it is done it 100%possible to create the excise invoice.
Please share your ideas to solve this issue.....
Best Regards,
Venugopal

Dear Lakshmi,
Thanks for your Prompt reply...
In our case delivery is there,but when we create the invoice the delivery document is not flowing,since in the itemcategory oder relavant billing.We have billing milestone at the item level,for activating that i have to make the billing relavance as I.Other wise the system is not allowing me to select delivery relavant and billing plan.Please help me to make the delivery document flow in the billing document.Then this 8I error will be solved.
I have alsochecked the update document flow,everything is perfect.
Regards,
Venugopal

BED & CESS not get updated while creating excise invoice

Hi experts,
When i create excise invoice with reference to commertial invoice,BED,CESS notget ubdated
in excise utilization tab "DEEMED is in blue color.How can i this into "NOBAND"
I have done the CIN Customizing
Please correct me ASAP........................
Thanks

dear experts....................help me to solve it

Cess not calculating while posting excise invoice

Hi,
while posting excise invoice cess(2% & 1 %) is not calculating on BED account.
pls tell what r the settings required to calculate cess on BED while posting.
Regards
Sunil

Hi
Ensure that you have maintained the excise defaults for Ecsess( Against ECS AP) and Shecess condition type( AP AT1 Cond) in
SPRO-Logisitcs general-Taxes on goods movement- India -Basic settings- Determination of Excise Duty- Maintain Excise defaults
Also check in PO the ECS and SHEcess values are non Zeroes
Regards
Sandeep
Edited by: sandeep13 on Nov 25, 2009 9:45 AM

Problem while creating excise invoice by J1IJ

Hi Friends
I am creating excise invoice from delivery for a depot using T-c0de J1IJ . Problem is every time when I select RG23 in drop down menu after entering delivery no, excise gp and series gp and and save it, system gives error that item is incomplete so excise invoice cannot be generated.
Can anyone pls let me know what is the problem. I though found one things that there was no excise value in the J1IJ screen. i.e bed and other excise duties were 0, so could this be the problem?
Thanks
Amit

Hi Friends
Let em explain you the process so as to analyse the problem clearly.
this is a trading process. My client is creating PO in advance and not on teh basis of PR generated after sales order.
SO process they follow is create sales order, delivery, gate entry, weightment entry, PGI and then J1IJ and invoice.
Here plant is a depot, so it is some kind of a depot sales process.
Dear G. Lakshmipathi
As suggested by you, will J1IG process be relevant in this case?. If yes then on what basis PO will be genrated here as my client is not generateing any PR w.r.t to sales order. Please advice.
Waiting for your reviews.
Thanks

Error while creating excise invoice to return Delivery (J1IS)

Dear all,
Plz help to solve this problem.
After MIGO. I have done return delivery to vendor(Movt-122).
With ref to the return delivery doc I am trying to create excise invoice to send to vendor in J1IS.
but error appears as Vendor not related to material documents.
Thanks & Regards
Sanjay Larokar

Hi Sanjay,
Apply Below Notes
1042131     Vendor displayed as incorrect in J1IS if no leading zeros
1025204     Vendor not recognized in J1IS and error 076 displayed
1008100     Error "Vendor not related to Material doc" displayed in J1IS
1003491     Vendor not recognized in J1IS and error 076 displayed
960564     Vendor code truncated in J1IS resulting in Error 8I 786
Cheers...
Santosh

Scroll Bar is not coming when creating Excise invoice in case of Depo Sales

Dear All,
We are upgrade system from 4.6 C to 6.0, when we create Excise invoice for Depo with reference to Delivery document no., when i am enter and select the item and go to excise invoice tab(incoming) there i dosenot get scroll down option which comes in 4.6 C.
Please send some solution for the same.
Thanks & Regards,
Pankaj

issue solved closing the thread.
thanks for all.
Maheedhar.T

Excise base amount not updated after creating Excise Invoice

Dear Friends,
The excise base amount is not getting updated in table J_1IEXCDTL u2013 EXBAS. System updates J_1IEXCDTL u2013 EXBAS, if condition category in the Base price condition type is maintained as H.But the problem comes when discounts are applicable.
Say, the base price is Rs 10000 and there is a discount of Rs1000. If I maintain the condition category u2018Hu2019, the excise base value is getting updated as Rs10000, but it should be Rs 9000. But there is no problem with the BED/EDCess/SHEd cess which are calculated as expected based on the steps defined in the pricing procedure.
I even tried using condition type JASS (Acc Seq JDUM -100% on the (Base price - Discount value and condition category H).It works only when JASS is set as Non-statistical.By doing so,Base price and also the Discounts conditions are getting inactive. When JASS is set as statistical, EXBAS is not getting updated.
Thanks
ISaac

Hi Issac,
Use the below user exit to populate the excise base value.
J_1I7_USEREXIT_CALC_EXC_BASE.
This user exit has the KONV strcuture of your billing, you can derevive
the base value and pass it to the parameter EXCITM_BASE so that the exci
se base can be updated during billing.
Thanks and Regards
MBS

Error while creating excise invoice for no bond

Hi,
Iam creating export excise invoice which is related to NO BOND, while saving the document iam getting the error "No account is specified in item 0000000001" in diagnosis iam getting "No account was specified for account type "S" in item "0000000001" of the FI/CO document.".
Kindly suggest me how to solve this issue.
Thanks in advance
V S Kumar

hi
check u r pricing procedure
whether g/l accounts assigned and also check u r revenu account determiantion settings
try to read the above said OSS notes
this error comes because
Item nnnnnnnn is the item number assigned by accounting.
When a billing document is transferred, a G/L account (account type 'S') is
missing for this item.
The problem is caused by incorrect Customizing in account determination:
the access of the G/L account via a condition table of account
determination is successful, however, in the corresponding table, no G/L
account is stored!
The account assignment analysis shows (for example).:
PR00 price 120 G/L account determined from account assignment type
KOFI
Solution
Use the account assignment analysis to check account assignment in the
billing document.
For the corresponding condition table of account assignment, maintain the
missing G/L accounts.
regards

Error while creating excise invoice J1IIN

Hi all,
I am into an implementation project where I am configuring CIN for Factory sale with Excise. I have gone through all the setting and done it according to the documents available. But while creating out going excise invoice (J1IIN) system giving an error "Customization for sub transaction type is missing in table excise accounts". I dont want to use a sub transaction type as there is not much variation in scenario here. However I created a new sub transaction type (SPROLogistic genTax on goods mov-Indiabasic settingmaintain sub transaction type) and assigned it Transaction type (SPROLogistic genTax on goods mov-IndiaAC determination-specify excise account per excise transaction) and G/L (SPROLogistic genTax on goods mov-IndiaAC determination-specify G/L ac per excise transaction). But still the same problem is keep coming. Also I have tried making this sub transaction type as default (SPROLogistic genTax on goods mov-Indiabusiness transaction outgoing excise invoice--- maintain default excise grp and series grp). but the issue remains unresolved.
More over while doing J1IIN i have also tried selecting the sub transaction type from drop down list but the list is empty and the massage displayed is "No values found"
kindly help,
BKR

Hi,
Yes I hv already maintained the sub transaction type for Excise TT DLFC (goods removal through sales). the entries what i maintained is as given below
DLFC          Credit     PLA AED account
DLFC          Credit     PLA BED account
DLFC          Credit     PLA cess account
DLFC          Credit     PLA SED account
DLFC          Credit     RG 23 AED account
DLFC          Credit     RG 23 BED account
DLFC          Credit     RG 23 SED account
DLFC          Debit     CENVAT suspense account
DLFC     10     Credit     PLA AED account
DLFC     10     Credit     PLA BED account
DLFC     10     Credit     PLA cess account
DLFC     10     Credit     PLA SED account
DLFC     10     Credit     RG 23 AED account
DLFC     10     Credit     RG 23 BED account
DLFC     10     Credit     RG 23 SED account
DLFC     10     Debit     CENVAT suspense account
Here "10" is my sub transaction type. I have maintained DLFC with and without sub transaction type for each account name. But that did not resolved the issue. More over is it mandatory to give a sub transaction type? Is there any way so that I can continue without sub transactions?

Error while creating Excise invoice in J1iA

Hi
While trying to create an excise invoice using J1iA, the system gves an error message "material type 000000000500852 does not match with master".
Note that the number 500852 is one of the materials in the PO.
Why this error and how to reolve it?
Please help.
Regards
Madhu

Hi,
Check the material type for Excise master data in T_code J1ID.This will be in Material and chapter ID combination.
Also for the same material if it is export then see the Foreign trade export data and see the details maintained in Excise Data.
If it is import material then See the Foreign trade Import data.
All the above data should match.
Hope this will help you.
regards,
Goraksh.

Error while creating excise invoice cancellation thru J1IS(J1IEX Invoice)

Dear All,
While creating cancel of purchase excise invoice with reference to J1IEX Internal Invoice No. system is throwing a error
"Error updating table J_1IEXCHDR"
Message no. 8I308
Suggest me asap,.
Thanks & Regards,
Radhika

Hi Radha,
Check the ETT Table (Excise accounts assignment table) in the config have assigned the relevant gl accounts for TType - CEIV Update all the gl accounts in the table.
Verify the node--> Specify Excise Accounts per Excise Transaction --- debit and credit account names to the TType -- CEIV
Credit -- CENVAT Suspence
Cr         RG23 AT1
Cr         RG23 BED,RG 23 ECS,
Dr         CENVAT Clearing
Dr         PLA BED, PLA AED, PLA SED
Dr         RG23 AED, BED, SED
Same should be assigned for Sub-Transaction Type '01' for CEIV Type.
Thanks,
padmaja

Error : 'Tax Jurisdiction is not determined' while creating sales order

Hi,
I'm creating a sales order using the BAPI : BAPI_SALESORDER_CREATEFROMDAT1.
I'm passing the following values in ORDER_HEADER_IN parameter:
doc_type,sales_org,distr_chan,division,po_method,sales_off,req_date_h,data_type,purch_no,purch_date,price_date.
I'm passing the following values in SD_ORDER_PARTNERS:
partn_role,partn_numb,name,langu,region,country.
The following fields are passed in SD_ORDER_ITEMS:
material,req_qty,sales_unit,store_loc (space is passed for st.loc),req_date,po_method,req_date,plant.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT1'
    EXPORTING
      order_header_in = sd_order_header
    IMPORTING
      return          = return1
      salesdocument   = order_number
      sold_to_party   = sd_sold_to_party
      ship_to_party   = sd_ship_to_party
      billing_party   = sd_billing_party
    TABLES
      order_items_in = sd_order_items_in
      order_partners = sd_order_partners
      order_items_out = sd_order_items_out.
The system returns a message in RETURN1 saying that : 'Tax jurisdiction is not determined'.
Please let me know if I'm missing something.
Thanks,
Narsingh.

Do you want to use the customer master address for the ship-to? Does the ship-to on the customer master haver a tax jurisdiction determined? Did you change the values in region/country from what they are on the customer master which would cause the tax jurisdiction determined on the customer master to be re-determined and thus rejected? You don't need to send address values in the partner table if you intend to use the customer master values...

Product is not determined while creating Order

Hi Experts,
I am trying to create an Order from CRMD_ORDER. I am giving a Valid Product number which is present in the master data. But still I am getting an Error that the Product is not present in the System. I am getting this error even when I am selecting it from F4 help. Please help me to solve this issue. Is their any type of configuration which need to be maintained? Please tell me as I am a Technical guy.
With Regards,
Anomitro Guha

Hi,
Please check following:-
1. If the product you are selecting is there in CRM first. Please check the product in transaction code COMMPR01
2. The item category determination settings in CRM SPRO
3. The sales area of the customer and the product are same in the transaction type you are using.
4. The product (created in CRM or downloaded from ECC) has the ITEM CATEGORY GROUP maintained.
Hope this will help.
Regards

Amount is not Determined while creating excise invoice

Similar Messages

Maybe you are looking for