Amount of ink consumed by the HP 4500

I have a new HP 4500 printer. It uses a considerable amount of ink to print a page - the paper emerges ....soggy.
Please advise me of the steps necessary to reduce the ink consumption while obtaining a readable print out.
Many thanks!!!

2 GB ... c'mon... 400-500 MB is way too much for a browser...
EDIT: ok... as far as i can see Firefox keeps some websites loaded into memory even though they are not used anymore (tabs are closed)
That is where the memory is being "used". For what... no idea... maybe for fast reopening of that tab (like Recently Closed Tabs from History menu).
Any ideas on how i can clear the no longer used websites from the memory?
I would prefer a key for about:config :)
Thanks.

Similar Messages

Amount of ink used

How can I determine the amount of ink that is being used ? I am considering purchasing a HPZ2400 and will be making art prints. I am trying to determine the cost. I can figure the paper cost, but need to know the cost of ink.Can you help or is there a monitor or some way to measure ink usage? Thanks, goodtwin

This forum is focused on consumer level products. For the Designjet you may have better results posting in the HP Designjet forum here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

False low ink warning on the 220 Black cartridge

Every time I get a low ink warning on the black PGBK 220 cartridge, upon visual inspection, the cartridge still contains approximately 20-25% of the ink. Non-OEM cartidges especially have a lot a ink left. Makes me think there's a Canon conspiracy in the printer maintenance software to identtify non-OEM cartidges and generate premature low ink wanings. Anyone else have this problem or know how to overcome it?

Hi drott1,
There are two types of ink warnings that will appear with your printer: a "low ink" warning and an "out of ink" warning. The "low ink" warning is designed to occur around the 25% mark. The intention is to give the consumer time to purchase replacement ink if necessary and have it available when the "out of ink" error occurs.
Think of it like the low fuel light on a car. While you still have enough gas to travel around, the warning light is a reminder to fill-up at the nearest gas station so you won't be stranded on the road without fuel. In a similar way, we don't want you to be stranded without ink in the middle of an important print job.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Printer ink drying up. Officejet 4500 wireless

I have a Officejet 4500 Wireless printer. I am a snowbird and vacation in Arizona. Upon my return the printer ink has dried up. Is there a solution to this problem? Is there a different printer that does not let the ink dry up?

Hi @HarveyAZ
The good thing about the ink system in your Officejet 4500, is that the printhead is intergrated into the cartridge. You do not have to worry about both a printhead and the cartridge.
I can't say there is a printer that does not let the ink dry up, but here is some helpful information;
Storing and Handling Ink Cartridges
Storing Opened Cartridges and Printheads
I hope this helps. Safe travels!
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Sir i am using datasocket read ,i am communicating with java but my problem is that bcz im using while loop to see if value has changed my labview consumes all the processors time ,sir i want a event like thing so that while loop is not in continuous loop

sir i have given lot of effort but i am not able to solve my problem either with notifiers or with occurence fn,probably i do not know how to use these synchronisation tools.

sir i am using datasocket read ,i am communicating with java but my problem is that bcz im using while loop to see if value has changed my labview consumes all the processors time ,sir i want a event like thing so that while loop is not in continuous loopHi Sam,
I want to pass along a couple of tips that will get you more and better response on this list.
1) There is an un-written rule that says more "stars" is better than just one star. Giving a one star rating will probably eliminate that responder from individuals that are willing to anser your question.
2) If someone gives you an answer that meets your needs, reply to that answer and say that it worked.
3) If someone suggests that you look at an example, DO IT! LV comes with a wonderful set of examples that demonstate almost all of the core functionality of LV. Familiarity with all of the LV examples will get you through about 80% of the Certified LabVIEW Developer exam.
4) If you have a question first search the examples for something tha
t may help you. If you can not find an example that is exactly what you want, find one that is close and post a question along the lines of "I want to do something similar to example X, how can I modify it to do Y".
5) Some of the greatest LabVIEW minds offer there services and advice for free on this exchange. If you treat them good, they can get you through almost every challenge that can be encountered in LV.
6) If English is not your native language, post your question in the language you favor. There is probably someone around that can help. "We're big, we're bad, we're international!"
Trying to help,
Welcome to the forum!
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Amount of forms open in the session

Hello all,
I would like to restrict/control the amount of forms open by the user,
as I am using open_form.
I have found nothing in the forms help about that, like a system variable and nothing so far on the web.
A possible workaroung/idea could be to have a global
that I count up on when-new-form-instance
and count down on key-exit.
Did someone have experience that problem ? what do you think ?
I am using Forms 10g R2.
Regards
Frane
PS : I guess an amount of 10 forms open by user, could be a good limit in order to don't get performance problem.

Hello François,
So far that's the only workaround that I found sor far, init the global at my starting, then count up/down.
Do you think a limit of 10 opened forms at the same time is reasonable ?
Thx
Frane
PS : btw bravo about your LAF project !!!!, it rocks the layout, I am testing it at the moment on forms migration 6i=>10g that I have to do (sad that it's not brand new appli/project to do, then layout could be really be review and defined nice from the beginning)

HT201272 How do i see a list of the apps that have been downloaded and the dates and times and amounts? Tried to follow the on-line thing but i want to compare what has been downloaded with my visa bill. HELP!!

How do i see a list of the apps that have been downloaded and the dates and times and amounts? Tried to follow the on-line thing but i want to compare what has been downloaded with my visa bill. HELP!!

See this -> http://support.apple.com/kb/HT2727

PO with Total Price amount calculated is incorrect at the time of printing.

Hi Experts,
I have one PO with Total Price amount calculated is incorrect at the time of printing.
When my user took the first print out the PO shows the incorrect Total amount.
After 10 mins my user taken the printout again,that time it shows the Toatal Price value is correct amount.
How i can analysis this type of BUG..!!!
I am thinking it might be BUG...???
Please advice with you valuable inputs.
Best Regards,
RK

Hi,
Are you using the standard programm and print form or are you using your own?. Most of the printing issues happens because of own programms. Try with the standard and then you will be able to see why is this happening.
Best Regards,
Arminda Jack

IN amount of FI document input the wrong profit center,how to handle it?

Dear everyone
IN amount of FI document input the wrong profit center,how to handle it? Transfer one profit to another or how to do it ?
Thanks,
Doris
Cross-post

Hi,
Are you using NEW GL or EC-PCA? If New GL, you can do manual adjustment (FI entry). If EC-PCA, you can do it using 9KE0.

Offcycle payment amount is getting adjusted with the regular payroll

Hi Sappers,
offcycle payment amount is getting adjusted with the regular payroll if the salary is negative.
We want to stop this...please help

Simply in the regular payroll you have to modify the rule X011 to cater the specific requirement.
You have to bring 0267 in between If statement
If SPRN
P0267
Else
P0014
p0015
ETC
End if.
I have faced same problem if you need will send you screen shot. Please let me know if required.
Afrasyab

How to get - Net amount for accounting doc in the SD doc flow?

Hi,
In my report I have to show the net amounts from the Sales doc, invoice and accounting doc, etc.
I got the FI doc amount from BSEG, however there the gross amount is stored.
I noticed that in the SD document flow for the accounting document the net amount is shown.
I tried with the following calculation, however in some cases this doesn't work (eg there is separate tax item in the FI doc):
"<lwa_bseg>-wrbtr - <lwa_bseg>-wmwst"
Is there a function module/sap standard code to provide this data?
Thanks in advance,
Peter

when u see the Item Header in SO or Billing , at the Head of Condition table u will get NET amount ?
are u not maintaining any seperate conditions for this NET amount ?
have a word with ur functional guys , so he can help u out.
Regards
Peram

Does the quadrangle's amount be limited when using the IndexedQuadArray?

Dear all,
I use IndexedQuadArray to describe a 3d's surface which is composed of thousands of quadrangle. When the quadrangle's amount is larger than 60000,the JVM is crashed with the following information:
+++++++++++++++++++++++
An unexpected error has been detected by Java Runtime Environment:
SIGSEGV(0xb) at pc=0x000000000dbefebb, ...
Java VM: Java HotSpot(TM) 64-Bit SErver VM(11.3-b02 mixed mode linux-amd64)
Problematic frame:
C [i965_dri.so + 0x31ebb]
The crash happened outside the Java Virtual Machine in native code.
See Problem ...
++++++++++++++++++++++++++++++++++
But when the amount is not larger then 60000, everything is ok.
My os is: 2.6.26.8-57.fc8, Redhat fedora 8, x86_64
J2SE : 1.6.0_13-b03
Java3D: 1.5.2
thanks

That's a computer problem. Your computer can't handle an amount larger than 60000. I had a similar problem.

When can consumer expect the price of photoshop to start going down?

WHen can consumer expect the price of photoshop to start going down.i want to buy it, but it is still to expensive for me, i went to Bestbuy and it was still to expensive for me as a an high school students to buy..

(This is the Acrobat forum, not Photoshop, and the people here are unlikely to be able to answer such a question, but...)
As a student you are probably eligible for a student license. Adobe sells many of its products with a significant discount for students and staff of education facilities. You should either ask someone from the IT department of your school about it, or call Adobe directly.

OSS notes for MB1B in checking Amount and Quantity depending on the mat. #

Dear All:
Where can i download OSS notes in MB1B for checking the amount and quantity depending on the material number?
Thanks,
CHOCO

Hi ,
We are not getting what you mean to say.
But as far my understanding of your query I am giving the reply.
OSS notes can be download at the tcode SNOTE.
Pls go to the tcode SNOTE-> GOTO ->DOWNLOAD SAP NOTE.
here you need to give the sap note number.
To get this number you first need to search in service.sap.com and find the relevant note that is useful for ur scenario.
And after finding that note and we need to give this number in SNOTE tcode and we need to download.
Pls tell me your requirement clearly so that i will try to find a oss note for you.
Pls get back to us for further assistance . Happy to help you.
Regards,
Viveks

PIR should not consume for the SubReq

Hi Guru's,
Please help me how to configure the planning strategy for my below requirement.
Currently i am procuring a HALB material thru subcontracting. This HALB is having BOM components. I need to send the BOM components to the vendor for assembly.
The BOM components will be used in some other HALB also. My requirement is, the BOM components should not consume for the subcontracting requirements, it needs to consume for in house production only.
The subcon requirement needs to generate the dependent requirements only, it should consume the PIR.
Currently i am using the planning strategy 70, requirement type VSFB. In this, PIR is consuming for the SubReq.
Please suggest me the suitable planning strategy for this scenario.
Thanks & Regards,
V. Suresh

Suresh,
I am curious why you would not want SubReq. It is also a different kind of dependent requirement. Also it seems yo are supplying the components to your vendor. So it makes sense that your forecast is consumed by dependent requirements so that planning is effective.
If for any reason you do not want to supply components to vendor then it would be best to mark such components as vendor provided. In such cases it would not consume your forecast (PIR). Hope this gives some new perspective.
Thanks,
Ram

Amount of ink consumed by the HP 4500

Similar Messages

Maybe you are looking for