Amount of times i ahev palyed a game

How do I reset the number that counts the amount of times I have played a certain game?

Well, restoring your ipod to its factory settings resets the basic 3 games, not sure about any others though. Dunno about any other ways. '

Similar Messages

  • Continuous averaging for a certain amount of time

    Hi
    In my program I have to use a start button to continuously average a value for a certain amount of time(lets say 3s) and keep and show the average the value. The state of the start button should return to off mode after that 3 sec so if the user hit the start button again it reset the array and calculate the average again.
    Would you please help me with this program. I have attached pic of what I ahev done
    With this vi I can take data after hitting start for 3 sec but I have these problems:
    1- I don't know how to calculate average value when finish getting data after 3 sec
    2- I would like the start button back to off mode after 3 sec so if I click on the start button again it reset the array and calculate the average again.
    Would u plz help me with this vi?
    Attachments:
    1q.jpg ‏169 KB

    Use mean function to average an array. And wire your time has elapsed boolean to a case structure and reinitialise your boolean control to default in the true case.
    Create invoke node as below, just in case you dont know.
    Beginner? Try LabVIEW Basics
    Sharing bits of code? Try Snippets or LAVA Code Capture Tool
    Have you tried Quick Drop?, Visit QD Community.

  • Is there a way to create a custom screensaver with pics/slides that display for different amounts of time?

    Is there a way to create a custom screensaver with pics/slides that display for different amounts of time? Or even add a "video slide" into the screensaver?
    My business has 3 TVs displayed in our lobby, each with its own apple TV and they are all linked to the same photo stream. Currently the Atv screensaver displays the photostream pictures of our products for the default 3 seconds. We just added pics/slides that now display messages and useful info for our customers but I want that info to be displayed for a longer period of time than the pictures to give people a chance to read it.
    I tried using flickr and powerpoint as a work around but no luck.  I created a slide in powerpoint with play length of 15 secs and saved it as a wmv file.  I added that file to a "screensaver" set in flickr and pointed the Atv screensaver to that flickr set.  It still displays everything, pics and the wmv file at the default 3 sec.
    I know I can increase the duration of all pics in the screensaver to display for longer but the goal is to have the pics display at 3 secs and the info slides to display at 15 secs.

    Welcome to the Apple Community.
    No that's not possible.
    If you have any suggestions that you think might enhance the Apple TV you can send Apple your feedback here 

  • Monitoring user logins and amount of time logged in.

    I presently have an open directory master with several Mac Pro's authenticating against it. The owner of the Mac Pro would like to do billing to the other departments based on who was logged in and the amount of time they were logged in.
    Normally the "last" command would be perfect for this but with the removal of the wtmp file in 10.5 the last command is flaky at best. I will restart its self multiple times per day or not at all for a month so it is hard to write a script to pull the data out of it.
    Does anyone know of a way in 10.5 and higher to find out the type of information that the last command displayed, IE who logged in, what time they logged in and what time they logged out.
    I need this information for the Mac Pro's but can pull the information from the open directory server if there is a way to get it from their.
    Does anyone know where the last command data is being logged since the removal of the wtmp file.

    neither of them seem to give me the login and log out times like the "last" command does. Is there not anyway on the open directory server to pull this data?

  • Amount of time for clients to join a Coherence cluster?

    What are some of the factors that affect the amount of time it takes for a client (without local storage) to join the cluster?
    We are seeing some tests where the time is a few seconds and other tests where the time is 10's of seconds (up to 30-40 seconds). Would like it to be as deterministic as possible. Any ideas?
    Thanks!
    Andy

    Hi Andy,
    We have found that JMX Mbean registration is one factor in startup time, if you have JMX turned on. On joining the cluster, nodes register their MBeans with the MBean servers. If every node has management=all, every node is an MBean server node, whether its needed or not. This can result in an MBean registration storm as every node registers their Mbeans with every other node at startup. Its especially noticable if you have a lot of caches in your cluster. We suggest that only MBean server nodes have the management=all setting to minimize this registration process on startup.
    Marie
    [email protected]

  • On iOS 7.0.2 everytime I unlock my phone while my music is playing, it skips. Forward, backward, and by small and large amounts of time.

    On iOS 7.0.2 everytime I unlock my phone while my music is playing, it skips. Forward, backward, and by small and large amounts of time.

    Hi cowboyincognito,
    Thanks for visiting Apple Support Communities.
    If you don't have the option to play music by genre on your iPhone, try this step to find the Genre option:
    Browse your music library.
    You can browse your music by playlist, artist, or other category. For other browse options, tap More. Tap any song to play it.
    To rearrange the tabs in the Music app, tap More, then tap Edit and drag a button onto the one you want to replace.
    Best Regards,
    Jeremy

  • Sound cuts out after any given amount of time, only way to turn back on is to reboot.

    For reference, I am using a fully up-to-date mid-2012 model rMBP. Attached to my MacBook via USB I also have an M-Audio KeyStation 49i, which is where I have my headphones plugged in (probably not related in any way, but just noting this).
    I first encountered this issue while using Chrome and listening to music on SoundCloud with Garageband open after the last Mavericks update yesterday. I initially thought it was a Chrome bug, and in doing some research, I found that other Chrome users were having the same issue as me, but it was related to PepperFlash (a version of the standard Flash player), and disabling it in Chrome Canary fixed the issue for them.
    Unfortunately, it did not fix the issue for me, but I have refrained from using Chrome since then and stuck to Safari to ensure that it's not two issues with the same outcome.
    Then I stumbled across all of the Mavericks users that are having sound problems; anything from crackling/popping to not working at all. It seemed, though, that everyone that was having the sound cut out for them entirely were not only having this happen after their laptops came back from sleep mode (which is not the case for me), but were able to fix it by restarting Coreaudio[d] or -- if they had been using the headphone jack on their Macs -- they just had to plug it in again and take it back out. Neither of these worked or were applicable to my situation. Some were able to get it working again by resetting the PRAM/NVRAM, and a few others seemed to be able to bypass the issue by using Soundflower, but neither of these solutions worked for me either. The only way I can get sound to work again is to restart my computer entirely.
    After doing so, I am only able to listen to audio for a certain amount of time. It seems to vary depending on how much memory the task is taking up. Like I'll be able to listen to a track or two on SoundCloud, or attempt to record into Garageband for five minutes or so. If I'm in a Garageband project that already has a lot of tracks, I'll be lucky if I can even get through a few seconds before it cuts out entirely. There are very quiet crackling/pop sounds every once and awhile, but it is hard for me to distinguish if that is just the natural state of the hardware I am using or if it is related to background system sounds.
    I'm at wit's end trying to figure out what the problem is, mostly because there are so many others with similar issues and varying hardware/software setups that it's hard to track down exactly what my own situation is.
    I'd like to know where I should be exporting any error logs from so that someone can take a look at this issue.
    Thank you.

    After doing some additional testing, I was able to get the sound working again without rebooting by:
    1. Unplugging the MIDI device.
    2. Resetting the audio input and output to "built-in".
    3. Plugging back in the MIDI device.
    4. Changing the audio input and output back to the MIDI device.
    Still, though, the sound only lasts for a little while, and there doesn't seem to be anything indicating how or why it stops.

  • How do I insert a pdf file (image) into a project as a picture-in-picture clip that will run for a specified amount of time?

    I want to insert a pdf created from a ppt slide into a FCP X project that will run as a PIP for a specified amount of time. I was successful in bringing the image into the project as a clip but the default for the image is one second. When I try to change duration of the clip, I am able to enter a new time length but the actual clip doesn't change.

    You select the PDF image in the timeline. You use Control-D and enter the new duration. What happens?

  • How do I get the page to refresh after a certain amount of time so it jumps back to beginning of one page site? Its for an exhibition

    Hi,
    I am in an exhibition space where I need to display my Muse website offline and locally on the desktop. I am looking for a way for the website to refresh after a certain amount of time so it can go back to the beginning of the page. Can someone help? Please!

    You can try the steps mentioned here :
    http://stackoverflow.com/questions/2787679/how-to-reload-page-every-5-second
    http://stackoverflow.com/questions/17886578/refresh-part-of-page-div
    http://crunchify.com/how-to-refresh-div-content-without-reloading-page-using-jquery-and-aj ax/
    Thanks,
    Sanjit

  • Writing a file for prescribed amount of time in a while loop after the triggering condition is met

    Hello Guys,
    I am trying to program an application in which if the trigger condition is met it should start to write the file.
    I was able to do that, but if I want it to be written for certain amount of time, and once the trigger condition is met, it should continue to write the files for prescribed amount of time. I was not able to do this. The file name should also be updated accordingly.
    I tried to with some options by keeping the creation of the file outside of the loop, if I do that then if the trigger condition is not met it will stop writing and I dont want that, as once the trigger condition is met it should be true thereafter.
    So I cant keep any thing outside the while loop, bcaz then it checks the condition of the shift register for the trigger and I have it as a false constant.
    I am attaching my application which is kind of mess and I have written in the application where I am having problems. For every iteration of while loop it makes a new file, and i dont want that, I want to write specific amount of time data to the each file.
    Please take a look at my code and help me in solving the problem. Any insights and examples on how to do this thing will be a relief to me.
    Thanks in advance.
    Regards,
    Nitin
    Attachments:
    PXI_4462_Sync_and_Stream_trigger.zip ‏192 KB

    what i am saying is to keep track of how much data you have written and whenever you need to make a new file you make 1.
    here is a vi that i just made that should show you. let me know if you need any help understanding it.
    Attachments:
    new file exemple.vi.zip ‏21 KB

  • Why is the "Empty Trash" option missing? All I have is "Secure Empty Trash" which takes a considerable amount of time.

    Why is the “Empty Trash” option missing? All I have is “Secure Empty Trash” which takes a considerable amount of time.

    check your finder preferences.

  • My iphone 5 home button can spin an unlimited amount of times. Do I need to buy a replacement or can I fix it?

    My warranty expired and I would prefer not to replace it with a non-OEM replacement.

    fadel727 wrote:
    My iphone 5 home button can spin an unlimited amount of times.
    What does this mean"

  • How do I adjust the amount of time before time outs?

    Time outs happen too quickly. I want to extent the amount of time that elapses before it times out while loading a site.

    Hello Scootdog61,
    Thank you for using Apple Support Communities!
    The setting you are looking for is shown in this article:
    iOS: Understanding passcodes
    http://support.apple.com/kb/HT4113
    Just above Simple Passcode, the setting that says Require Passcode.
    Regards,
    Sterling

  • Is there a way to set the amount of time before Messages shows me as idle?

    I ran a script in iChat that allowed me to extend the amount of time before I showed as idle, but I haven't been able to find something comparable for Messages.

    HI,
    Yes.
    See http://hints.macworld.com/article.php?story=200402181751007
    You  need to Write to the com.apple.IMAgent.plist instead of the iChatAgent one listed.
    9:58 pm      Monday; July 29, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Update 3.1.3 Vault backup takes an inordinate amount of time...

    Installed the update, 3.1.3. Now clicking Vault icon to update the Vault, the update takes an inordinate amount of time. In addition after the update the Vault icon, lower left, remains red.
    Normal Vault update goes to the server, prior to the update it ran quite fast then icon turned black. As a test I created a new Vault on my Desktop (deleted the original), again update takes an inordinate amount of time, still the Vault icon is red.
    MacBook Pro, 8 GB RAM, 10.6.8, 2.4 GHz i5.

    Hi shutterp33d,
    That speed answer is a yes and no. To the local drive yes speed is almost where it was prior to the 3.1.3 update. Over to the network drive it is quite slow. Even direct connected to an external vault update is much slower than before the 3.1.3 update.
    My network is AirPort Extreme to which I have a Pogoplug connected with RJ45, a Seagate 1.5 TB external drive is connected to the Pogoplug via USB 2.0.
    At present Aperture vault update has been running forty-five minutes being one third through. So, shutdown the Pogoplug did a direct cable connect to the Seagate from the laptop still vault update is taking a longer time than before the update.
    This time the icon has changed from red to black. Then I disconnected the USB cable direct connect, reconnected the external to the the Pogoplug. Maybe this is a Pogoplug hit maybe not.
    Thank you for listening.

Maybe you are looking for