Amount & quantity blank MIRO without MIGO

Hi Experts,
When I do PO-MIRO ... No goods receipt yet, the amount and quantity field is blank.
Can anyone help me, is there any OSS note that supporting the condition that for MIRO without MIGO, the amount and quantity field will be blank.
Thanks,
Melissa

hi
when u do the MIRO system took values from the GRN,
if u do MIRo first then as there is no GRn u will get blank values only
if ur doing for advance payment then use transaction F-48 and give advance, then GR and then MIRo so in MIRo u will get the warning of advance payment
if u want perior invoice then u have to fill the blank with amount and quantity manually as system dont know the amount u want to invoice
as sytem dont know the value and quantity of the invoice fileds are blank ,but if u scroll to the right u will find the value and the quantity of the PO from there u can copy using ctrl+Y and paste it to blank colums
regards
kunal

Similar Messages

Amount & quantity in miro

Dear Forum,
In miro invoice transaction, when I enter the PO, I notice amount and quantity both also empty. Why?
Thanks
Rgds

Assuming you're working with GRs, the quanity and hence value (quantity * unit price) will only be presented if a GR has taken place.
Note you can still manually enter a quantity and value (but first check the PO history and what MIRO type transaction you are posting e.g. Invoice or Credit, or Sdebit or Scredit).
if you've knocked out the GR indicator, just enter the quantity and value manually (but first check the PO history and what MIRO type transaction you are posting e.g. Invoice or Credit, or Sdebit or Scredit).
Regards,
Nick

GR/IR amount Diffrences between MIRO and MIGO for Document currency

Dear Friends,
I have one issue in MIRO Document posting, I will explain the issue by below steps.
1. I have created Purchase Order with option "Exchange rate fixed" and my PO Exchange rate is 1.8700
Purchase order details
Quantity - 2, Price - 23,376.85 and Total PO value - 46,753.70 EUR ( Document currency), local currency is SGD
2. We posted Single Goods Receipts entry for the above PO and system took exchange rate from PO (1.87)
GR Accounting document value - 46753.70
3. We have create two invoice documents for the above single Goods Receipts.
First invoice posted with correct value and accounting entries are below
Debit - GRIR Clearing account - 23, 376.85 EUR - 43,714.71 SGD
Debit - Material account - 0.00 EUR - 2272.23 SGD
Credit - Vendor account - 23, 376.85 EUR - 45,986.94 SGD
4. Problem in Second invoice posting only, Refer below accounting entries
Debit - GRIR Clearing account - 29,221. 06 EUR - 43,714.71 SGD
Debit - Material account - 0.00 EUR - 4219.52 SGD
Credit - Vendor account - 23, 376.85 EUR - 45,986.94 SGD
Credit - Material account - 5844.21 EUR - 0.00 SGD
Now my questions is why system posted extra one credit line item with value 5844.21 EUR for second invoice, I tried to simulate this same situation again. but I couldnt get this extra line item for credit.
Please advice and guide me.
Thanks & Best Regards,
M.Ganesan

Hi,
Both Invoice header details Exchange rate is followed by Exchange rate table. But it did conversion based on PO Exchange rate.
We didn't maintain Exchange rate type EURO for the currency EUR to SGD.
Normally system will post the exchange differences in local currency not in Document currency.
Thanks & Best Regards,
M.Ganesan

Amount split in MIRO without tax amount

Hi All,
I had posted this in different thread and felt its better to open separate thread instead.
I am facing a problem to use amount split on net amount instead on gross amount so that taxes can be paid in first installment.
Situation is as below
Entry is generated
GR/IR Dr. 100
Tax Dr. 25.50
Vendor Cr. 101.25 (90% split on total amount)
Vendor Cr. 11.25 (10% split on total amount)
Items are split based on installment payment term correctly. however since tax need to be paid immediately it should split like this:
GR/IR Dr. 100
Tax Dr. 25.50
Vendor Cr. 115.50 (90% split of 100 GR/IR value + 25.5 of tax )
Vendor Cr. 10 (10% split)
Then in OBY6 I enabled amount split. When I try to post invoice in MIRO with amount split I am getting error: Account assignment not completed for all required fields (PayT) Message no. F5A034. And in payment tab payment terms fields are hidden. I have ticked 'Enable amount split' in OBY6. and have updated amount split tab.
Please let me know where the error is?
Thanks,
Pushkar

The problem was in posting key I had maintained payment term as required entry. I changed that into optional and it is working now.
Edited by: Pushkar Marathe on Sep 8, 2011 6:23 AM

How to restrict the quantity & rate of MIRO with MIGO and PO

Hi friends,
Can any body tell me how to restrict the quantity & rate of MIRO with MIGO and PO.
e.g. if we have done MIGO for quantity 10 and the rate maintained in the PO is Rs.100.Then at the time of MIRO system should not allow to change the quantity and rate.
How we can do this?
Regards
Purnesh Sharma

Hi,
You are misunderstanding the use of MIRO.
If you change the details in MIRO you are NOT changing anything. You are just entering the price and quantity from the Invoice.
If this price and or qty is different from the GR aqty and PO price then the system will block the invoice for payment (and it can issue messages toinform the buyer if configured correctly).
The whole design of MIRO is based on the principle that you enter EXACTLY what the vendor has put on the invoice. By preventing the users from changing anything you will get NO mismatched invoices, but you will not be paying the vendor the amount specified on their invoice. This will surely cause problems.
If you do want to ensure that ONLY the GR qty and the PO price are used and cannot be changed then why not consider using ERS (Eveluated Receipt Settlement. this is basically self billing.
Effectively you will be paying the vendor based on what you have received in MIGO multiplied by the price from the PO. (which is what you would be doing if you stop any changes in MIRO)
Steve B

"Amount in Local Currency" in MIGO

Hi Experts!
I want to enter value in "Amount in Local Currency" field, in MIGO during Goods Receipt against Purchase Order (101 movement type). "Amount in Local Currency" field is not visible in "Quantity" tab of MIGO during GR. But after GR is posted, in display of material document, it is showing in "Quantity" tab.
I tried to add this filed to movement type 101 in SPRO-MM-IM-Settings for Enjoy Transactions-Field selection per Mvt type. But there is no provision to add "EXBWR" to 101 Mvt type.
Can anyone suggest a solution for this.
Thanks in advance.
Regards,
Sree

Hi Guys,
Thank you very much for your replies.
The requirement is during MIGO (101), system should valuate the stocks with a different price other than the PO price. For this purpose, I want to use the filed "Amount in Local currency" in MIGO. If this field is in input mode during MIGO, we can enter the required price and then stocks will be valuated at this price (like in case of mov type 561, we have the same option). Can we get this filed in MIGO in input mode through any configuration or not? If not through configuraton, any Exit/Badi etc ? Kindly suggest the solution.
Thanks in advance.
Regards,
Sree.

Invoice amount/quantity not populating when parking invoice before GR

Hi gurus,
When I am going to park an invoice without GR (the import cases where invoice comes first) the system is not populating the amount/quantity in the invoice (MIR7).
If I will check the GR based invoice option in the purchase order than it picks the amount/quantity.
My users requirement is the population of amount/quantity in case when GR not performed.
Can anyone help me out from this scenario.
Regards

Dear Deepak
Thanks for your reply but in the cases of import the GR won't be possible. The invoice will be received before GR and if the amount/quantity does not populated automatically then there is a 100% chances of error (manual entry).
There should be some way through which these fields will be populated.
Regards

Avoid MIRO without GR

Hi
In my system i can see that MIRO can be posted without GR. We would like to stop this and MIRO cannot be posted without MIGO.
Where can we set this up.
I have tried on google and various forums but no luck. I know i don't want you guys time to be wasted without my ground work.
Many thanks.
-erpMan-

Hi erpman,
May be you can ask help of ABAPer to select automatically the field "Goods Receipt" Indicator so that item involves a goods receipt and also the field "GR-Based Invoice Verification" and these to fields still grised in ME21 so that user can not modify anymore and they still obliged to post MIGO before invoice posting
Hope this help you
Regards
Tarek

When you run the Adobe Creative Cloud opens a blank window, without authorization...

When you run the Adobe Creative Cloud opens a blank window, without authorization, without a list of programs, just empty, as in the screenshot

Hi Vetal1000 ,
Welcome to Adobe Forums
You can use the below mentioned links for solution -
http://forums.adobe.com/message/5509684
or
http://forums.adobe.com/thread/1251577
Let us know if that helps !
Thanks
Garima

How to show the quantity in decimal in MIGO

Dear expert,
How to show the quantity in decimal in MIGO?? for example in material BOM the quantity is 12.480 but the quantity in MIGO is 13. it's automatically rounded.
what should I do to show the decimal point in MIGO?
Thanks
Pauline

Hi,
    Please check in su3 -
defaults (Tab) -
Decimal Notation.
    Change the decimal notation and logoff and login to apply the changes.
    I think it may help you.
Regards
Sreedhar Reddy

Material cost estimate with quantity structure and without quantity structu

What is the difference between material cost estiame with quantity strucutre and without quantiry structure?

For the quantity structure pl read the following link
http://help.sap.com/erp2005_ehp_02/helpdata/en/7e/cb938143a311d189ee0000e81ddfac/frameset.htm
For without quantity stucture
http://help.sap.com/erp2005_ehp_02/helpdata/en/7e/cb938143a311d189ee0000e81ddfac/frameset.htm

Problem with the amount appearing in LC in MIGO

Dear Guys,
I have made a dealer PO , this PO has 4 line items , I have done Migo for each item sepeartely,& while doing the migo ,I bifurcate the amount in the excise tab as per the info given by the vendor.
Now in the Migo of the first three line items the amount appearing in LC (qty Tab in MIGO) is matching with total amount (Base price +Excise Duty (10.3%) +CST) , but in the fourth item the amount in LC is equal to Base price + CST.
What might be the reason for this difference , & which is right( does dealer PO has anything to do with this difference)
Regards,
DGN

Hi ! Jeyakanthan,
I am already maintaining the zero tax code for all dealers PO , what I would like to know know what should be the amount appearing in LC (In Migo) , should it be Base Price + Taxes + CST or only Base Price +CST (since you get set off on Taxes ).
Regards,
DGN

I filled out a pdf form using my ipad adobe reader. When I email/print it is blank..without answers

I filled out a pdf form using my ipad adobe reader. When I email/print it is blank..without answers? Help!

I have the same issue now with the newest update...the iOS 7 design update now wont allow edited PDF's inside of this app to print with the forms filled out...so now all the usage i have for this app is GONE...
I am so angry...you dont have any clue how mad I am...cant email them to me or print to airprint with forms filled
Someone please tell me there is a fix...PDF's i created with the app before the update are fine...they are all there and can be printed with forms filled but new ones dont...please say there is a fix

MIRO without Service Entry Sheet

Hi,
We have a odd requirement to have the MIRO done before the Service Entry Sheet. The business process is as follows:
1. User will raise a Service PR and then a Service PO will be raised.
2. The services will be carried out at the plant.
3. There will be a central location for Invoices and the vendor might send the invoice before the Service Entry Sheet is created.
4. To manage the huge load, the MIRO will be posted and will be blocked (Since Service Entry Sheet is not created).
5. The Blocked Invoice will trigger a workflow which will be sent to the requestor reminding that a Serv Entry Sheet has to be created.
6. The requestor will then create a Serv Entry Sheet and the Invoice will be cleared.
Std SAP does NOT allow the MIRO without the Serv Entry Sheet.
Any feedback will be appreciated.
Amit

Hi
you can do this way-
step1-
You can change the Error message into warning which you are getting during invoice posting ( in absence of SE) or
make the changes in std SAP invoice posting code
see at which stage SAP code validate whether Service Entry is exist for given PO.
If SE is not there then instead of allowing to throw an error message, and bypass the error message with warning message.
Step2
you pass the MANUAL BLOCK on invoice via user exist . As soon as you post the invoice, Invoice will have header level block (you can see the invoice in RSEG table RSEG-SPGRQ)
Step3
there should be one function module which will fetch the requisitioner ID from Purchase Order ( ARNAM or AFNAM, based on company policy)
logic- if invoice has manual block , then get the requestor's ID and send a notification via WF to requestor 2) you need to schedule a job which will call T code MRBR with option Manual Block to release the invoices
Process- Once SE is done by requestor and subsequent GR is created automatically, the job will run as per the schedule and invoice will be unblocked
Hope this will help you

My user doing the direct posting in MIRO without useing the PO

Hello Exports
My user doing the direct posting in MIRO without using the PO.
but after posting in MIRO, its picking up the R ( invoice Verification ) in Payment block field. and also i ve check in Vendor master there is no "R" Falg in Payment block field.
Can any body give me suggestion on the same
Thanks and Regards
sudharshana vamsi

Thanks for all
The probelm was solved
Regards
vamsi

Amount & quantity blank MIRO without MIGO

Similar Messages

Maybe you are looking for