Amount release triggered at document posting, not parking

Our objective is to have senior accounting personnel approve/release journal entries that exceed a certain value, say $100,000. We have configured the release function for parked documents, using workflow WS10000051 with business object 'FIPP', event "COMPLETED" and release amount of $100,000. However, this appears to assume that staff have authorization only for parking, because if you have posting authorization, nothing stops you from posting a document over $100,000. It seems illogical that you have to exceed a certain $ value before the release will trigger, but if your document is below the amount, you can't post it because you can only park.  
In order to avoid making approvers release every single journal entry, what we want is for users to be able to post any document below $100,000.00, but be forced to park ( save as completed) all documents >/= this limit. We tried setting up a validation on the document amount, but the error message forces us to exit completely, i.e. doesn't allow us to park the document.
Is there perhaps a different workflow that triggers at the point of posting, rather than parking, that will accomplish what we want?
Thanks,
Kathryn

Hi Kathryn,
Were you able to find a solution for this problem. We have the exact same requirement. Any pointers will be helpful. Thanks.
Regards,
Anuj

Similar Messages

  • Adding amount into customer balance without posting

    Hi Gurus,
    Is it possible to add in amount into customer/vendor/gl balance without any posting impacting the book?
    Example, interest calculation! To keep track the interest amount into customer balance. The interest amount is shown in customer balance but there is not FI document posting.

    Always park these documents, never post them and use the parked documents report for your analysis.
    this is a very crude solution for a crude problem

  • Withholding tax Amount not being displayed in the Invoice while posting a Parked Document

    Hi,
    I have created a parked document for the Vendor who has the Witholding tax code w9 - 15% . I created Parked Document using FBV1 and then tried posting the same using FBV0.Somehow I am not getting the Withholding tax Amount in the FI Document created. However the W/Tax Base Amount and the W/ Base LC are being displayed correctly.
    Say if the Line item Amount is 1,000$ then both the amounts mentioned above in the Additional tab "Withholding tax Data" are being displayed as 1,000 usd but the W/Tax Amount is 0,00 USD.
    2. Also We have the PI and the Interface is written to post the Parked document while the xml file. There is a Method Execute_Asynchronous which has two BDCs one  for FBV2 ( Change Parked Document ) followed by the Post Parked Document FBV0. Hence When I try to post the Parked Document using the SPROXY Interface which has two BDCs Viz FBV2 & FBV0 I still get the Invoice with the Same Amounts and at times with additional 2 zeros added to it in the Additionsal Tax Data Screen.
    I am not sure what is the reason for this. Can anybody help  me sort out this Issue.
    Can there be any Config issues. Please let me know what all config Settings we need to do to sort out this Issue.
    Also let me know why the 2 Zeros are getting added to the Base Amount e.g if the Vendor Line item is 12,000 USD it shows as 12,00000.00 in the Withholding tax Data  Tab in the Invoice.
    Regards,
    Deepak.

    Dear Praveen,
    please check into IMG if You defined the WT type You are using for Your Comapny code:
    IMG --> Assign Withholding Tax Types to Company Codes
    I hope this helps.
    Mauri

  • BAPI_ACC_GL_POSTING_POST is not posting a parked document

    Hi,
    I am trying to post a parked document using BAPI 'BAPI_ACC_GL_POSTING_POST' but its giving an error 'Balance in transaction currency'. I am providing the document number of the parked document in the header data of the BAPI and providing G/L details(Debit) where the document will be posted. The parked document already contains the credit entry i.e. vendor number and the amount of the invoice. So in the BAPI, I am just entering the Debit amount and the G/L. But its giving the error. Has any one posted a parked document using this BAPI or any BAPI. I want do the same thing as we are doing through transaction 'FBV0'.
    Your help will be appreciated.
    Thanks,
    Padman

    - Call transaction SM13 after calling your BAPI, to check if some update tasks are waiting or running.
    - Did you check BAPI BAPI_CASHJOURNALDOC_CREATE ([Note 616804 - FBCJ: BAPI for saving cash journal documents|https://service.sap.com/sap/support/notes/616804])
    - For extension in BAPI accounting, check [Note 487722 - Using EXTENSION1 for accounting BAPIs|https://service.sap.com/sap/support/notes/487722]
    - For general information on ACC BAPI check [Note 306504 - Collective note: BAPIs for the AC interface|https://service.sap.com/sap/support/notes/306504]
    - If data is already in FBCJ, look at FM FCJ_POST_ALL and FCJ_POST.
    Regards,
    Raymond

  • Not able to post a parked document in G/L

    I created a G/L document using FB50. After Simulating it I parked the document. When I try to post the document using FV50, the "Post" tab is not active in the parked document. Can anyone suggest how to post this parked document?
    Regards

    No matter what transaction you use, the Post command will show as greyed out.
    That's simply because to post the parked document, choose the icon "Save as completed" either from the screen icon, or from the top menu (Document --> Save as completed).
    The document will be saved and effectively will be posted. You can then go to FB03 (or any other view txn), and use the same document number to view the posted document.
    Rgds
    Gulshan

  • Parked document could not be posted 00 S 349 BSEG-BEWAR

    Hello Friends ,
    Users have parked Journal entries which has vendor , customer and GL line items .
    the documents were getting posted through workflow till sometime back .
    suddenly  , we have started to get the error message as    " Parked document could not be posted 00 S 349 BSEG-BEWAR "
    the BSEG-BEWAR field is missing in the SAPMF0A screen while trying to post.
    Could you please guide me what could be the reason .
    I did search before posting this question ,  but not able to find any relavent ones.
    I am aware of the function configuration using OB41, but not sure if the issue is related to the same.  
    Please assist.
    thanks
    Raghu V

    Hi,
      BEWAR field is Transaction type field. Check whether Transaction type is missing in your document.
    The issue is not related to OB41.
    Regards,
    B. Radhika

  • Release procedure for Document Park / Post

    Dear FI experts,
    We want to set release procedure for Customer Credit Notes (FB75)
    For this we did following configuration -
    FI >> FI Global Setting >> Document >> Document Parking (all setting w.r.t. release approval)
    Created and parked a document using FB75.
    In MM procedure we give the authorisaiton of Release code to respective users and then he is able to release the PO.
    What is to be done in this case ?
    What is the process / tcode for releasing this parked document.
    Thanks & Regards
    Rajesh

    Hi Prem
    Thanks for ur reply
    I tried MRBR but system is giving following message -
    There are no blocked invoices that match your selection
    Message no. M8654
    In MM release procedure , authorisation of Release code is given to respective users and then he is able to release the PO.
    What is to be done in this case ?
    Can you please explain??
    Regards
    Rajesh

  • Error_DP: MIR6 Adding text to the Note tab then posting a parked document

    We receive an error when posting a parked document in MIR6 only when we click on Change mode and click on the Note tab.  Then when we click Post button, a Runtime error occurs.
    SAP Note 939340 was implemented to our QA system, but the problem persists.
    Runtime error is:  RAISE EXCEPTION.  Exception condition ERROR_DP raised.
    A raise statement in the program "C_TEXTEDIT=========CP" raised the exception.
    We think it is related to the billing block, but it only occurs when the Note tab is involved.
    Any ideas?

    Hi,
    it seems it is not a problem of MIR6/MIR4.
    It is a question of texedit control.
    There are several OSS Notes regarding this (depending on your version).
    e.g.
    https://service.sap.com/sap/support/notes/814358
    Best regards.

  • Error F5 702  while trying to  post a parked document in MIRO

    Hi,
    Our Client is in SAP Version 4.6c, and a document is parked and we are trying to post it, it has two cost centers and one G/L account. We have applied SAP Notes related to this error and our client has applied Support packs also.
    How to overcome such an error and post this document?
    Is it relating to rounding errors, we get a amount difference of 0.02 and SAP does not allow the invoice to be posted.
    Can anyone help?
    Regards,
    Anitha

    Hello Raju,
    Its a invoice which the user posts via a MIRO.
    I can do it with a FM also, U r right.
    There have been lots of issues with rounding values when trying to post a parked document in MIRO , till now such invoices were getting posted. Now, we r getting errors, just trying to find if someone else had encountered with a similiar problem and what was the approach they used?
    we get a value of 0.02 difference when trying to post via MIRO for some invoices, till now such invoices were getting posted. Its purely a functional issue though.
    We checked the invoice also, its prefectly fine. There does not seems to any issue, just wondering if there  has been any exchange rate problems etc...
    Thanks,
    Anitha

  • Error messege BP603 while posting the parked document budget exceeded

    Hi ,
    We are having the budget function and its for overall release.
    Budget has been relased and assigned value is less then the released budget in all conditions.
    Its throwing the error messege No BP603  while posting the parked documents. Unable to understand the reason why its behaving.
    Please let me know if anybody has faced such problem.
    We are into ECC6, EHP 4 and the SAP note 557431 is not going to help anyways.
    Regards
    N.Raju

    Hi,
    Please follow as given below:
    1. Use T.Code KO31 and enter order and deactivate the control
    2. Then try to post the parked document
    3. And use T.Code KO30 and enter the order to activate the control
    Some times system will check budget availability which already commited for parked documents.
    Hope it will work.
    Chandu

  • Parked document posting - Budget period screen field error

    Dear Experts
    We are working on FM BCS, While posting of the parked document through Transaction FBV0 we are getting the below error message.
    "Field BSEG-BUDGET_PD. does not exist in the screen SAPMF05A 0302
    Message no. 00349
    Diagnosis
    The specified field does not exist on the screen.
    Procedure
    Check your batch input data
    We gone through the error help information and checked field status groups and found everything is fine.
    We can able to post direct invoices without getting any errors. The above error triggers only in the scenarios of " parked document posting". 
    Kindly suggest....
    Thanks in advance.
    Regards
    Rao

    Hi Mar Novalbos
    Great, the note was helped a lot...
    The issue has been resolved.
    Thanks for your kind support as usual....
    Regards
    Rao

  • Document not found. Excise posting not done or document is archived.

    Hi,
    I have created an order, delivery and billing document. Billing doc has been released to accounting. However though the accounting doc has been generated, the excise invoice is not generated and also BED, EDCESS & VAT amount not disable. When I was doing the Excise invoice (T code: j1iin) I got the following error
    Modvat utilization done already for XXXXXX of Delivery No: XXXXX
    Message no. 8I446
    Diagnosis
      Modvat utilization done already for mentioned billing document
    Procedure
      Check the billing document entered
    If I click on display button after that I got error like
    Document not found. Excise posting not done or document is archived.
    Message no. 8I301
    Diagnosis
    The entered document number could not be found either because it is not
    correct or the document has been archived
    Procedure
    Please check the entered document number
    Plz help me what cud be the reason for that.
    Regards
    LVK

    Dear LVK
    Go to SE16, input Table J_1IEXCHDR and execute.  There input the excise invoice number and execute.  Check whether system is showing a document.  Alternatively, without giving any data in the above table, just give the excise invoice date and execute.  Check whether the said  excise invoice is stored in the table.
    thanks
    G. Lakshmipathi

  • Posting a parked document with a  BI session

    Hi, I am trying to post a parked dokument in FI through a  batch input session.
    The problem is that the parked dokument is yet not complete and I want to complete it with the missing line items and post it in one step, meaning with one batch input. is that possible? especially in using the RFBIBL for triggering the batch input session.
    Is it possibel to post a parked document with FB01 when parked dokument and 'new posted document' have the same document ID? what happens with the parked document if this is possible?
    thanks! for your help
    denise

    Hi
    I suspect it may not be possible. The only option i could see in FBS1, is Post with reference, but again it would not accept parked document as reference
    Thank You,

  • Error while posting the parked document in ECC 6.0

    Hello ABAPers,
    After upgrade from R/3 4.6c to ECC 6.0, when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT".
    Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
    Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
    On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes i.e it shows only 4-5 rows and hence only 4 tax types passes to the screen and remaining is left out and error is thrown. This results in document not getting posted.
    But in 4.6 c a bigger screen pops up and no error is thrwon.
    We are not able to check FBVB directly, since it does'nt allow Direct call to this transaction.
    We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
    Could you please help us in resolving this issue/ let us know if any configuration/ screen variant change is required?
    Thanks!
    Regards,
    M M Jaffer.

    Hello Nabheet ,
    It is a standard code. We are calling the FM  'PRELIMINIARY_POSTING_POST_ALL'  for posting the parked document. The FM calls internally another FM 'POSTING_INTERFACE_DOCUMENT'. This calls the transaction FBVB where we get the above error.
    Thanks.

  • Error 'Specify account number' while posting a parked document through FBV0

    Hi,
    I am getting an error 'Specify account number' while posting a parked document through transaction FBV0.
    I am not able to figure it out as to what account number it is referring to. Since the document is parked I assume the GL account used has no problem. Please help.

    Hi,
    Try to change the Account number and then save or post the data. I think Once We Parking the Document it wont allow to post the data without changing.
    Try same scenario in the development its be useful
    Regards,

Maybe you are looking for