Amp designer and pedal board not working in Logic Pro 8

Hello! I am new to LOGIC PRO 8 and maybe my silly question has a easy answer. When I want to record a guitar or a bass in the audio channel created for it, and want to insert for example a complete rig, the sound won't load and a message will apper saying "pedalboard not available" "amp designer not available" or pedal not available". If I open Mainstage 2 or Garage Band and I play, pedals are working and all amp modulation as well. If I go and look into the application support and plug-in settings folders it seems to me that everything is there. What am I missing or doing wrong? how can I solve the problem and make these enable for recording? THANK YOU FOR HELPING!

primocaster wrote:
"pedalboard not available" "amp designer not available" or pedal not available".
Hi
Amp Designer and Pedalboard plugs are in Logic 9 only...
CCT

Similar Messages

TS4628 onscreen keyboard does not work in logic pro x

onscreen keyboard has stopped working in logic pro x - latest version.
There is no indication of midi in or out on control bar when keys pressed.
also, certain keys do register do not trigger from outboard keyboard instrument.
when playing back tracks, the relevant keys auto depress on the onscreen keypad.
audio output is fine on the system. all keys on piano roll keyboard work fine.
The onscreen keyboard works fine in garageband
have reset all midi assignments in prefs.
have reinstalled the program but the issue remains
silvejon

You have either installed a midi controller that is over riding things or you are running an iOS App that is interfering....
Turn off all iOS devices to test for iOS App
Delete CS prefs to test for conflicting Midi Controller issues...
Delete the user preferences
You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
In the Finder, choose Go to Folder from the Go menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
If you have upgraded from an earlier version of Logic Pro, you should also remove ~/Library/Preferences/Logic/com.apple.logic.pro.
Restart the computer.

Unable to resize the amp designer or pedal board window since upgrading to lion - any ideas?

I have no idea why but the pedal board and amp designer plugin windows no longer fit on my screen since upgrading to lion.
It's driving me crazy has anyone any ideas how I can fix this?
Thank you

Sorry to not get back to you sooner. With other devices not having issues connecting to the Home Hub except the AirPort Express definately indicates the Express being the culprit. The only thing I can suggest trying before paying a visit to your local Apple Store, would be to perform a "factory default" reset on it to see if it can connect and stay connected.

Download CS6 Design and Web Premium not working

Hi,
I have been given this link by Adobe after purchasing the Design and Web Premium. I have been able to download 2GB of the 4.5GB of the file 1 of 2 from this link in the English version for Windows.
http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
Please help!
Elysha

again, if you repeatedly lose connectivity make sure you're using a wired, not wireless connection or use a more stable wireless connection.
or you could use a download manager that allows you to continue downloads when they are interrupted.

GPO and RA plug-ins not working in Logic Pro 8.0.2

I have installed RA and GPO on my Mac Book Pro. When I open Logic Pro they are not appearing in the Plug-in list. Kontakt 2 is but won't let me load individual instruments for GPO. The strange thing is I also have a copy of Logic Express and both RA and GPO work fine here (even though they don't pass the AU validation). They also work as stand alones fine. In Logic Pro, RA and GPO do not appear in the AU validation list. Can anyone help? I have all the latest updates as far as I am aware. It's very annoying!

There's no Auval or RA or Garritan Personal Orchestra in the Audio Units Manager in Logic Pro. Though Stylus RMX that I also use and Kontakt Player 2 are there and successfully validated. The RA and Kontakt Player component are exactly in the place you said they would be.
I've since discovered that RA does not in fact work in Logic Express. As for whether it's loading up in Rosetta or PPC version - how do I tell that?
I really appreciate your help but I'm still stuck at square 1. Any more suggestions?!!

HT2844 Head phone and mic is not working in mac pro

i have philips headphones and mic. this is conected but not working

What part is not working?
Do you get any sound out?
Do you get any sound in?
What does the contol panel indicate?

Digidesign Core Audio not working in Logic pro 7.1

Help! I'm not able to use Digidesign's (002 interface) as a core-audio interface for Logic Pro 7. Pro-Tools works fine with the 002. Logic works fine with built-in interface. However whenever I go to change from the built-in audio interface to the core audio 002 interface in audio drivers (in preferences), it won't allow me and I get the following message:
"Audio device has been removed" (press OK) then
"Previously selected audio interface is not available" (Press OK) (digidesign 002 interface has double brackets around the name in the audio drivers). If you try to relaunch driver again it disappears from the drivers list? In addition the "Digi design core-audio " application that opens up on the dock - just says "not connected" and some buttons are greyed out and you cannot "reconnect"?
Is there a conflict of drivers with the OS/Logic version and digi core-audio? I'm running Pro-Tools ver6.4, with digi core-audio 6.9 (updated from 6.4 - didn't solve the issue?), Logic Pro 7.1 and OS 10.3.9 (on a G4 1.25Ghz, 512Ram)?
It seems like a core-audio driver problem - but having updated to the latest version I'm still not getting any joy? Any offers?! Cheers.

Check the FW cable.
Anyway about compatibility Digidesign says this:
Mac OS X 10.3.9 Not Supported
With ALL versions of Pro Tools 6.x for Panther (other than Pro Tools LE 6.8.1 with Mbox 2 hardware only), the highest version of Mac OS X 10.3 that you should use is Mac OS X 10.3.8. There are incompatibilities with Pro Tools 6 and QuickTime 7, which is installed by Mac OS X 10.3.9. If you must use Mac OS X 10.3.9 for some reason, you should revert to QuickTime 6.5.2, available from the Apple website.
cheers
rob

Overdubbing not working in Logic Pro X

Hi everyone,
I am running LPX 10.0.5 on my Macbook Pro (Mid 2012) with OS X 10.8.5 and unfortunately midi overdubbing (for software instruments and external midi tracks) seem not be working for me. The Replace button is of course deactivated and the midi recording settings are set to "merge when cycling" (translated from German, I don't have the English version).
Any help would be much appreciated.
Regards

Hi
I've looked at the info posted above and I still can't get this to work consistently in Logic Pro X - 99% of the time it just doesn't work. I'm beginning to think this is a bug. I have also ensured that the "Drag: Overlap" is set as I think by default it is set to "No-Overlap" - not sure if this makes a difference but I read in the Apple Discussions Forum that this affected some other users.
My project setup is a follows:
Record->MIDI Recording Options->Join with Selected Regions
Punch/Overwrite - Disabled
OSX Mavericks 10.9.1
Logic Pro X 10.0.5
Any help on this would be appreciated as I just can't this to work as it did in Logic 9
Thanks
Neil

MIDI Keyboard Not Working With Logic Pro X

I have a MIDI keyboard that I've had for a while. I've upgraded to Logic Pro X, but the keyboard isn't working. I can't hear sound when I play it, nor when I record and try to play it back to myself. What's more frustrating is that I used this keyboard all of the time with Garageband, and there were no issues . It's a simple M-Audio DigiCore MIDI keyboard, and I've updated everything, but I just can't get it to play. I am new to this software, so I'm having a really difficult time navigating this as well, so any help is welcome.

Ok here's what happened, controller was working fine everything set up, then it quit. called tech help at sweetwater, the motu was not seen as a midi interface anymore...went to motus web site, downloaded update for 10.4.4 THAT WAS IT! now it works!
Take note....thanks for your replies!

Novation Remote 25SL Not Working with Logic Pro (Logic Automap)

Hi,
I can't seem to get my new Novation Remote 25 SL to work in Logic Automap mode.
I have the Remote SL in Logic AutoMap (template #39). When I launch Logic Pro 7, The Remote SL shows : "Logic AutoMap" on the Left LCD display, and nothing else happens, it seems to be frozen at this state. The Up/Down arrows on the Left side don't change anything.
Any clues why this is happening ?
I have read many posts on this and other forums of user issues in setting the Remote up properly, and have it work in Logic Automode. Tried many configurations, and settings, re-installed sw, OS 1.0.13, but no luck so far.
I would like to hear from Logic Pro 7 users who have successfully setup their Remote SL with Logic Pro 7.2.1 in Logic Automode, and are working with this system without any issues.
This will be very helpful in figuring out if there is something wrong in my settings, or if the unit itself is defective, or I am doing something wrong during the installation of the software ? I have been trying to get this thing to work for the past two days, with no success so far.
The Remote SL should be a wonderful controller for Logic Pro 7 (once it works !) so, I'm being as patient as I can with this thing.
I'm using Logic pro 7.2.1 on a Mac G5 2.5 Quad, Mac OSX 10.4.6
Thanks.

Hi Blaze,
I tried your settings, but no change, the Remote SL is still frozen showing :
"Logic Automap" on the left LCD .
You mention setting "Mixer View 64" well the parameter I see is called :
"Mixer View Fader" which I guess is the same one you are referring to. I set it to 64, it was set to 8, but has not changed anything. Still having the same problem. This problem is dragging into Day 3, what a bummer.
Thanks.

USB Interface Not Working With Logic Pro 9

Hello,
I've had a Tascam US-1641 for several years now with absolutely zero issues on my old PC. Ever since I upgraded to Mac (early 2011 17 inch Macbook Pro running Snow Leopard) I've had nothing but problems with the US-1641. No matter how many times I uninstall-reinstall the drivers and what USB port I plug it into, whenever I turn on the device and it's connected to my Macbook, it crashes my operating system and it freezes everything I was doing. Logic Pro doesn't load and when it sometimes does (10 minutes later), it immediately crashes when I click anything.
I've tried several tips to fix it and nothing worked. The most popular choice was select the default input/output in Logic to the system audio, then quit Logic, turn on the interface, then restart Logic. No such luck. I have to reboot my machine at least 5 times, uninstall/reinstall the driver and hope it works to use the interface. I thought it was the operating system, so I upgraded to Mountain Lion and installed the new driver for Mountain Lion, after of course deleting the other drivers and removing all previous data, and it is still giving me the same problems.
I don't have the money to afford a replacement model or a different interface from a different company, so I'm hoping you guys can help me figure out what exactly it is that's causing the interface to freeze my operating system and crashing my Mac whenever I try to use it. I am getting extremely frustrated at this and as much as I love OSX and Logic, what good is this piece of software if I can't use it? I need help.
Thank you.

The problem lies with Tascam and their inability to write stable drivers for OS X... and isn't anything to do with Logic Pro ..
As you know, you are not the only person to have had this issue and the reality is, while the 1641 might work fine with Windows, when it comes to OS X Macs.. it's an entirely different story... depending on the version of OS XS you are running.
The one tip I have read, that seemed to fix it for most people.. (Though not all) is as follows;
(Thanks to Paulypaulpaul for this)
-uninstall your tascam driver 2.10
-restart
-install driver 1.03
-restart
-plug in your tascam
-goto where you download your drivers (http://tascam.com/product/us-1641/downloads/), scroll down to the bottom where it says firmware, Download the firmware 1.02 (3rd from top under firmware), install it. your control panal should now read 1.03 for your drivers and 1.02 for your firmware.
-install drivers 2.10
-restart
Follow each of the steps exactly.. including all restarts when indicated..
...and good luck...

Bounce not working in Logic Pro 9.1.7

Longtime LogicPro user (going back to Creator!). Recently, when I Bounce a mix, it doesn't stop at the end point I've set. Sometimes it keeps going indefinitely... I eventually hit Command/. to stop it. but nothing is bounced; sometimes, after I hit Command/., it does bounce but with all the added silence at end.
As far as I can tell, I'm doing everything the way I've always done it, and it's always worked.
I usually set the Cycle points for beginning and end, but this problem happens wheteher I've set the points that way or whether I do it manually in the Bounce window. It happens whether it's an audio file, mp3, or both. It happens Realtime and Offline. And it's gone from being an occasional glitch to the norm...which of course makes finishing work impossible! Big problem!!
Any help/suggestions/solutions... even workarounds, most appreciated. Thanks.

If you're still using Snow Leopard you might try this fix, although it's not exactly the same problem they could be related. Don't delete the file, just move out of the location they describe, then apply the fix they recommend.
http://support.apple.com/kb/TS3968
Also, In the bounce dialog, make sure "Include Audio Tail" is not selected.
On some occasions that will cause a bounce to go on forever, even more so if "Normalize" is also selected.

Apple remote is not working with Logic Pro 8

Hi all
Anyone any idea why, it would really help me as I need to remotely activate the record button. Many thanks Dave

My guess: it is simply not compatible with 10.6.8 (which was released well after Logic Pro 8)

I'm having three issues: spellcheck goes off, lastpass not working on all sites, and message boards not working correctly

I'm having three issues with Firefox. I had the latest 10.1, and I just tried Aurora, but that didn't solve my issues.
1) Spell checker keeps going off on messages boards. This happens frequently on 247 sports boards. I enable spell check, make a post, and it's off again when I make another post.
2) On the same 247 board, when I make a post (by clicking the "post reply" button, nothing happens. To get it working I actually have to quit the site and go back in.
3) LastPass plugin is no longer working on all sites. Site like Facebook and Yahoo all of a sudden Lastpass doesn't recognize as having usable fields.

Hi,
Please check if this happens in a [https://support.mozilla.org/en-US/kb/Managing-profiles new profile]. If it's okay, you can later [https://support.mozilla.org/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile?s=profile&r=1&e=sph&as=s copy the needed personal data] from the old profile. Firefox stores your personal data and settings in another location separate from its [http://kb.mozillazine.org/Installation_directory files/folder]. A new profile would have the default Firefox settings ('''Tools''' ('''Alt''' + '''T''') > [https://support.mozilla.org/en-US/kb/Options%20window '''Options'''], and [http://kb.mozillazine.org/About:config about:config] ), and usually would also be empty of any '''Extensions''' and themes ('''Appearance''') in Tools > Add-ons) and their settings. Also, a new profile would have no previous stored website data/settings etc., ('''Tools''' > [https://support.mozilla.org/en-US/kb/Clear%20Recent%20History '''Clear Recent History''']).
[https://support.mozilla.org/en-US/kb/Profiles?s=profile&r=2&e=sph&as=s Profiles Howto]
[http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder & Files]
[http://kb.mozillazine.org/About:config_entries about:config Entries]

Bex Query Designer and Bex Analyzer not working

Hi All,
While Login to Bex Analyzer, It is giving an error "An error occured while communicating with the BI Server"
While Login to Bex Query Designer, It is giving an error "Login Aborted".
Please help me to resolve this issue
Thanks
Irshad

Hello Irshad
Not sure if it helps but can try suggestion mentioned in this note.
https://service.sap.com/sap/support/notes/1434630
If problem persists you can upgrade your SAP GUI Patch level.
Still facing problem, please contact SAP .
Regards
Anindya

Amp designer and pedal board not working in Logic Pro 8

Similar Messages

Maybe you are looking for