Amp for pla

You know I said in a post about the Zen Vision M and me wanting to use amps on headphones to maximize battery life? Well these are expensi've, but just read what they do:
http://www.headphone.com/products/headphone-amps/the-mobile-line/headroom-airhead.php
Its an amp that is seperate and does actually stop the player having to dri've the headphones, so the battery life would be longer if you bought this. Don't know how much longer, but possibly by a significant amount.

Yeah lol. I guess so, and I also guess that I wouldn't pay that much just to change the battery life by a small amount.
Though I have noticed with my Zen Vision M, even on the headphones that come with it that have a very low Impedence rating (would allow less power to power the sound, so can be on at lower volumes with same power output as larger headphones)
I still notice with alot of my tracks (even with the smart sound feature on or off), the volume is low even at almost full. Especially when there is a slight bit of background noise.
Are there any headphones someone can link me to, that have great frequency response, a low impendance to allow me to have volume as low as possible (Around 8ohms would be great), and great bass and good sound stage so it sounds better than standard headphones, and offer some type of sound blocking? but also keeping them releti'vely cheap?
I know I'm asking of a lot, but could someone link me to a few possibilities?
TYPE OF HEADPHONES:
I've tried the in ear headphones by the way, and they don't fit my ears, and I've also tried the new ones that go into the ear canel, and they aren't very good I dont think.
I don't feel comfortable wearing them, and they don't offer as good sound as I expected, and still have to have volume on normal to hear them since they produce a very low sound to protect the ears, but they do offer sound blocking, but...no
Ones I do want though are the standard put on ear ones, but keeping them small so they can be walked about with on the streets but still offer all the points of above.
Thanks for any help
NOTE:
I also have a Zen Vision M, so it has no removable battery ... and no, changing batteries after 40 hours wouldn't have been a problem for me, as I have a wall recharger that recharges AA/AAA batteries over night, and would last about 4 Zen Vision M charges anyway before a change.Message Edited by flame on 02-0-2006 05:6 PM

Similar Messages

  • I have a Comcast system and am going through a Bose amp for sound.  The comcast box has an HDMI port which I've used for the Apple TV connection.  Nothing works! Help.

    have a Comcast system and am going through a Bose amp for sound.  The comcast box has an HDMI port which I've used for the Apple TV connection.  Nothing works! Help.

    Thanks.  Thought that would be the solution but for my wall mounted TV it's going to be a problem but many thanks for your reply.....

  • I need power amp for my i pad

    I want Power amp for my i pad. IF any one know please let me know
    Thanks
    sureshkumar

    If you are for better sound from your iPad, there are a myriad of portable devices that your iPad can be connected to to increase the iPad's sound levels.
    Search for iPad speakers, speaker systems, or audio for iPad.
    If you want to connect your iPad's audio to some sort of stereo or surround sound power amplifier that has to be connected to a larger pair of audio speakers, any on the market will work. You need to purchase a cable that connects to the iPad's headphone jack that splits the stereo signal to left and right channels that can be plugged into the left and right channels of the audio amplifier.

  • Car audio. amp for replacement door speakers??

    im buying replacement 6x9 3 way speakers for my jeep and my main question is do i need an amp for the speakers??
    Speakers are: http://www.bestbuy.com/site/Pioneer+-+6%22+x+9%22+3-Way+Car+Speakers+with+Carbon+Graphic+IMPP+Cones+... 
    Head Unit is: http://www.bestbuy.com/site/JVC+-+50W+x+4+MOSFET+Apple%26%23174%3B+iPod%26%23174%3B-Ready+In-Dash+CD... 
    HELP ME??

    im going to assume that you have a grand cherokee or something along those lines.  you will only get lows and a little bit of mids from the 6x9's in the doors and your highs will be from the tweeters on the top dash. you can either take the route of buying 6 1/2 adapter plates for the 6X9 slot and go with component speakers.  Or you can buy 6x9's for the doors and you will  need to replace the top dash speakers with tweeters.  either way you will pay around the same price. 
    as far as the deck that is a great deck, im not a jvc fan, but many are and i do alot of installs on jvc's.  let me know if i can help further.  good luck!
    I am a CAR Geek Squad installer tech lead, but my views that i post are my own and not that of best buy. if you like my posts give me some kudos, if you need further help contact your local Geek Squad installation bay!
    Please read my posts with a smile, cause thats how I write them.Although i have a cool avatar by my name, I am just a member of the community that works for Best Buy.
    ***KNOW THAT I CANNOT ISSUE OFFICIAL RESPONSES AND THAT MY POSTS ARE ONLY HERE TO HELP BEFORE A OFFICAL RESPONSE IS MADE BY A MODERATOR.***

  • Can I use an adapter with the output stats: 5.2 volt and 1.0 amp for my iPod Touch 4g?

    Hello, I bought an iPod touch from apple store. I got the cable with one part to the iPod and the other USB. But i didn't get an adapter to make it possible to connect the USB to an adapter and then into the wall jack.
    So I had one at home with these stats: 5.2 volt and 1.0 amp. Can I use it to charge the iPod Touch or is it "unhealthy" for the battery?
    Kind Regards
    Kiwiii

    It shuld be fine. It is within the tolerance for USB 5 Volts.

  • HT204388 how to make mac mini selecting hdmi (amp) for default audio output

    I currently have to go in system preferences sound option output and select hdmi (my sound system amp) at every single startup. how can i get my mac to use it as default. thanks

    Long shot, but...
    Next time you start up...
    Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back.

  • I have an ATV 1 which is connected to my Bose Lifestyle System.  I just expanded the system and connected a second AMP for the expansion.  Can I connect the ATV 1 to the aux jacks (RCA Cables) of the expansion amp?  Thanks

    I have an ATV 1 which is connected to my Bose Lifestyle System.  I just expanded the system outdoors using a second Bose System Amp.  Does anyone know if I'm able to connect my ATV 1 to the Bose expansion module in addition to keeping it connected to my main Lifestyle System using RCA cables?  The new amp has RCA input jacks for auxiliary inputs.  Thank you. 

    hello, normally such issues are caused by a firewall/security software which doesn't recognize & therefore blocks new firefox versions. please remove all program rules for firefox from your firewall and let it detect the new version of the browser again.
    [[Fix problems connecting to websites after updating Firefox]]

  • Modern AMP for Solaris 10

    Hi All
    I'm upgrading a server that has a very old MediaWiki intranet service and I figured I would bring it up to date while migrating.
    Sadly this server uses the old Glassfish Webstack 1.5 for it's AMP stack, which of course is now dead and doesn't provide the minimum requirements for LTS supported MediaWiki versions.
    Researching for a replacement I found Apache Friends' https://www.apachefriends.org/index.html XAMPP, which looks like it might do the job, but it seems it's only an old version available from the SourceForge site (in particular I think it has the HeartBleed vulnerability still in it).  I guess they have quietly dropped development for Solaris 10 since it's not prominent on their main page any longer.
    All the articles on the net I find on the topic are also quite old and I'm afraid if I try and install individual packages using their instruction they just won't work work together.  Even MediaWiki's pages are outdated on the topic.  I'd rather spend my time moving to Solaris 11 (but not yet!).
    So does anyone know of an Apache/MySQL/PHP stack for Solaris 10 that is still updated or reasonably current?

    Don't go back any farther though.
    I've heard reports that prior to Solaris 9, the included in.tftpd lacks certain extensions that are required for PXEGRUB in Solaris 10 to work properly.
    Darren

  • Certification AMP for Oracle EBS on Grid Control v10.2.0.5

    Hi,
    Our company is currently using Grid Control v10.2.0.2 and different agent versions on 32-bits linux servers.
    We are using this version for about 3 years and now we want to start with a fresh Grid Contol enviroment so started a new project.
    The goal of the project is to use the latest version of Grid Control and 64bits linux servers, but also to monitor our EBS enviroments.
    Is Oracle currently working to certify AMP(3.0) for Oracle Ebs for Grid Control 10.2.0.5 and agents version 10.2.0.5 on 64-bits linux servers??
    I searched OTN and metalink but couldnt find anything about it.
    greetings

    Hi,
    You can check this Doc :Installing Enterprise Manager Grid Control
    Section. Installing Enterprise Manager Grid Control Using an Existing Database its included RAC database also.
    HTH

  • Max Amps for Mobo Fan Header?

    What is the max amps a cpu/case fan can pull from a Motherboard fan connector? .5 amps? .8 amps? 1 amp? more? I have 5 fan connectors on my motherboard. Can they all pull 1 amp fans?
    MSI 890FXA-70
    Phenom II X6 1055t
    850watt Pro Corsair
    4 x 2GB 1600Mhz OCZ
    Dual HD5830 1GB
    50GB OCZ vertex 2
    3 x 320GB Samsung F4 RAID-0
    LG Blu-ray/DVD-RW

    tho not same mobo...
    i did try one of my 120mm 3500 rpm 1.67amps Delta fans on my main cpu fan header...
    works solid. no lack of power. worked great with speed fan for noise control.
    however, currently in different layout and i got a fan controller anyways cuz i need it for my
    case fans.
    also, at same time while using the 3500, was using 2x 3pins off the mobo at 0.16amps each
    i'd say be safe and don't pull then more 1.0 amps as they all say... but
    i saw at least one review on newegg where the guy uses it for his cpu fan main fan straight
    off mobo 24/7 and im guessing he's not roasting - mine din't  and i did touch the connector after immediately after
    shutdown to see if it would be overly hot to the touch...
    and it was warm... but not toasty.
    i wasn't going to try to run two of the 3500rpm deltas tho... i do have splitters, and is
    still tempting to date, but burnt plastic smell kinda hard to remove from room for longer period of time. hah. 
    so... if you wanted strong push-pull directly on the mobo cpu fan connector, can use 2x 2500rpm deltas fans (only 0.8amps each which
    totals slightly less than one 3500 rpm fan)
    but then again... you gotta check it for temp to be sure no toast for your mobo.
    Nothing wrong with quick test... shouldn't hurt nothing... just dont touch the mobo while it's on.
    If you have IR thermometer gun... best use... wish i had got one on sale other day for 18 bux shipped!
    FANS ARE FUN! 

  • Oracle Application Management Pack(AMP) for Oracle E-Business Suite

    1. How to find the (already) installed OEM version ?
    2. How to find if AMP is installed and what version ??
    3. If not installed,Metalink Doc id to install and upgrade AMP to latest version ??
    Hi,
    I am new to EBS , please help me in these questions
    Thanks in advance.

    Please see this thread for similar discussion -- Applications Management Pack for 11i
    Thanks,
    Hussein

  • AMP for Zynq 7000

    hello every one
    I have a zedboard and I want to run linux on only one of the cores of arm. I followe the "XAPP1078"(V1.0) tutorial and I successfully booted linux on both cores, but as I followed "xapp1078-amp-linux-bare-metal" tutorial for having AMP system and running linux on only one core I faced some errors which says "unable to open rtc device(rtc0)". what is the solution for running linux on only one of the cores in zynq7000 device on zedboard?
    your help is really appreciated.

    yes, but I solved my problem, I wanted to use xapp_1078 for zedboard. while it is not totally the same for zedboard.  after reading http://www.wiki.xilinx.com/XAPP1078+Latest+Information I solved my problem.tnx for ur reply siktap.

  • Table for PLA Details

    I need details about PLA account related to excise invoice..
    Which table refers to PLA...
    Thanks & Regards
    ..Ashish

    Check the table J_1IEXCHDR
    Excise data is stored as header and detail.
    Check the table J_1IEXCDTL
    This contains the detail data at line item level for a given excise invoice
    DOCNO  Internal Excise Document Number
    EXNUM  Official Excise Document Number

  • J2iu Not Showing Previous month Balances For PLA (High Priority)

    Dear Gurus
    We are using Transaction J2iu for Fortnight Utlization. Now When we are
    trying to utlize PLA for the second Fortnight Of month March 07, The
    System is only showing the Current Month Balances ie The Balances for the
    month Of March 07 , And not accounting the balances for the previous months.
    Kindly Suggest .

    Carry Forward the GL Balances to Next Year i.e in Apr.07 &
    then Try it out again.
    Sometimes, System takes into account reatime balances & not balances as on particular posting date.
    Regards..
    Ameya...

  • Headphone amp for use with i-mac

    Hi,
    Im looking for a headphone amplifier for use with my i-mac and logic 9, im using a pair of sennheiser HD 650's, can anyone recommend one?
    Thanx...

    You can't write to it because it's formatted as NTFS which OS X will read but not write to. If you want to continue using the drive with both a PC and OS X you will need to download and install NTFS-3G so you can then write to it from your Mac. You can get NTFS-3G at:
    http://www.macupdate.com/app/mac/24481/ntfs-3g
    If you want to use the drive exclusively with your Mac then move the data off it and reformat it in Disk Utility (Applications - Utilities - Disk Utilities) as Mac OS Extended (Journaled.)

Maybe you are looking for

  • Error while data loading

    Hi Gurus, I am getting error while data loading. At BI side when I  check the error it says Background Job Cancelled and when I check in R3 side I got the following error Job started Step 001 started (program SBIE0001, variant &0000000065503, user ID

  • Error with quantity field:Datasource Creation Using Function Module method

    Problem with DATASOURCE Creation using Function Module method : I have created a datasource ZSTANDARD_COST_PRICE using Function Module method . The datasource creation is successfull when I remove the quantity field from the Z table . If I dont remov

  • Play multiple videos in sequence

    Hi, I've multiple videos stored in FMS and would like to merge them into a single video object in order to play all of them in sequence (so that a user thinks it's a single longer video). Is it possible?

  • What requirements need to use IE8 in SAP?

    Hi,       Our systems are on ERP 5.0 SP22, Netweaver 640. The company that I work wants to upgrade Internet Explorer from 7 to 8. What requirements I need to use IE8 in SAP? Thanks for the help!!!

  • Running Bat file in Minimized Mode

    Hai All, I need to run bat file using Runtime, Bat file should run in minimized mode ... any one help me Regards Yuva