Amplitude increase when using Soundtrack Pro as external editor

I am finding that when I use Soundtrack Pro as an external sample editor from within Logic, the subsequent audio in STP is louder by about 7-8dB, and so often clips. The audio region plays normally within the Logic sample editor and if I open it with STP, not going via Logic, it plays normally as well.
Am I missing something about the 'use external editor' command, or is this a bug?

I'm glad to hear I'm not making a trivial error - unless we both are of course . Another bug seems to be that the waveform disappears at odd times.
I think I will persist with STP as it covers some ground better than Logic, though it is a bit thin to be properly regarded as a 'Pro' app in its own right. It definitely rests on the coat-tails of FCP.
matrixx, what do you use as an external editor instead, if anything?

Similar Messages

Can you use soundtrack pro's loops in your youtube videos or do you need to purchase a license since it is royalty free?

Can you use soundtrack pro's loops in your youtube videos or do you need to purchase a license since it is royalty free?
I understand they are royalty free, I am just confused about using the actual loops for films, videos, etc - if there is a special license you must purchase or what?
Yes sure, it's a library and may be used a lot - but is it legal or against agreement?
And to clarify - what about music I create on the program , that is ok right?

If you purchased the software you have the right to use the loops that came with the software in the software to make whatever you want.

I am using both PSE 13 and Lightroom 5. When I use Lightroom as an external editor and save the photo, it shows up in PSE13 as an edited file but does not look any different. Why doesn't it appear edited?

I am using both PSE 13 and Lightroom 5. When I use Lightroom as an external editor and save the photo, it shows up in PSE13 as an edited file but does not look any different. Why doesn't it appear edited?

People who have Photoshop, but don't have Lightroom, need ACR so that they can use Raw files. Without ACR they could do nothing with those (they may also like having ACR so that they can work on other kinds of image using the same kinds of adjustments and techniques, as are used with Raw files).
People who have Lightroom, can get access to Raw files regardless whether ACR is present or not. They can use Lightroom on other kinds of image also, using the same methods. LR can pass images directly into Photoshop without passing via ACR (or else does so transparently, which amounts to substantially the same thing).
ACR does not, strictly speaking, even need to be installed for this external editing to happen. In fact, not even PS needs to be - since a different image editor can be used instead, while still retaining the Adobe Raw conversion etc.
Lightroom "subcontracts out" specialised external tasks, in this workflow, but is still your "main contractor": the image is otherwise located, viewed, managed, adjusted/presented and output entirely using LR.
So IMO we can divide image processing into:
operations that involve pixels and layers and layer masks and adjustment layers etc (of the kind done inside Photoshop)
operations that involve parametric edits (of the kind done in ACR where you are not using a Lightroom based workflow; otherwise, done inside Lightroom)
When PS is called in, that's because those tasks are impossible or unsuitable to do in Lightroom. But those tasks can't be done in ACR either - by definition, since LR and ACR have exactly the same image processing "feature set".
Lightroom is irrelevant to the Bridge + ACR + PS workflow. This workflow requires both your PS and your ACR to be current enough, to support your Raw format etc.
ACR and Bridge are irrelevant to the LR + (image editor) workflow. It is in this case, only LR which needs to be current enough to support your Raw format etc.
RP

When reinstalling soundtrack pro, i read skip on the installation dvd?

When reinstalling soundtrack pro, i read skip on the installation dvd?

Hi chiny, have you tried resetting NVRAM/PRAM?
-mj
[email protected]

Problem Using Aperture as an External Editor

I'm having a problem using Aperture as an external editor for iPhoto. I've set preferences to "Edit in Aperture" and selected the Aperture application. When I click edit a photo in iPhoto, Aperture fires up as expected, but it does not load my photo. Nothing seems to be exported from iPhoto into Aperture.
I can export the same photo to my desktop and then load it into Aperture fine.
When I set preferences to edit in CS2, this works fine, only Aperture seems to be the problem.
What am I doing wrong?
I'm using the following versions:
- iPhoto 7.0.2
- Aperture 1.5.4

If you have Photoshop CS2 then you'd have a better editor using it within iPhoto as follows:
Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Using Lightroom as my external editor - worked, now broken

For nearly two years, I used Lightroom as my external editor for iPhoto using the following process:
1. Select 'Edit in External Editor'
2. Select Add to Library (not Copy or Move) when the Lightroom import dialogue comes up so that LR is simply pointing to the file my iPhoto library
3. Make all my edits in Lightroom (my original is left untouched at this point, and LR stores data about how to process the original)
4. Export the photo from Lightroom into the same folder as the original using the same filename
At this point, I would get a prompt saying:
"The following files already exist:
[path/to/file]
Do you wish to overwrite the existing files, skip the existing files, or rename the exported files to avoid collision?"
I could simply choose 'Overwrite' and my file in iPhoto would be updated with the changes from LR.
This worked until right after Christmas. Then, in January, the process mysteriously stopped working for any new photos. Now, if I use the same process, I get the following warning:
"You can not choose to overwrite the existing files since some of them are the source files"
Interestingly enough, I can still go back to any of the pre-January images in my LR library and export them back into iPhoto, overwriting the original. I have not updated Lightroom at all, but I suspect I did download an update to iPhoto. Still, I can't figure out what is materially different, and what I might be able to do to get my old workflow back!
Any ideas? And no, I don't need a lecture about the fact that iPhoto and LR are both image library managers, and that I should just switch to LR or use Aperture. I like the way iPhoto organizes my files (Events, Places, etc) and I only end up needing to edit 20% of the photos in an external editor. LR is definitely the editor I prefer and I'm not crazy about Aperture.
Thanks dudes!

Larry you fail to mention that using an external editor with iPhoto will not allow you to save your changes back into the iPhoto library.
Unfortunate you simply are ignorant of how iPhoto works - when you use an external editor with iPhoto and save the edited photo it is returned to the iPhoto database and the iPhoto database is updated correctly.
There are many Apple apologists on these forums
No - but since these forums are for iPhoto support the users here are very experienced iPhoto users and do use iPhoto a lot - no apologies - just CORRECT information on how to use iPhoto (and if it will not doe what you want sometimes suggestions on where to go to do what yo want)
and they will either try to convince you that other software is not as good
I certainly have NEVER seen this - every piece of software has good and bad points - and again remember *this is an iPhoto support forum*.
or totally ignore newbie users whom want to know how they can do something in iPhoto when it is not possible due to it's limitations.
Once again this is simply incorrect - unfortunately you have no idea how iPhoto works or how to use it
Rather, in my opinion I prefer to be honest
Honest maybe - but very unknowledgeable
and if another application does a function that iPhoto doesn't then I would personally point that out.
Good plan - the problem is that you simply are ignorant of how iPhoto works and what it can do so con are posting erroneous information making false claims
Your totally incorrect posts are unnecessary and could be confusing to users who want information - as the TOU state please TEST your assumptions before you post them here - totally incorrect posts like yours are not the least bit helpful
LN
Message was edited by: LarryHN

Using elements 9 as external editor

Hi, I bought elements 9 today. I have all my pictures organized in aperture 3. I want to use elements as an external editor. I selected elements as the external editor in aperture 3, but when I try to edit a picture using the external editor via aperture 3, the image will not load into elements.
I get the welcome screen in elements, when I choose edit, the editor opens but no picture is loaded. I also tried to edit via elements used as external editor from aperture when I had elements open. What happens then is the exact same thing only difference is that elements opens again (so that I have to elements apps running at the same time)
Anyone have an idea what I am doing wrong.

You chose the wrong file in the PSE folder. This is about iphoto, but the problem is the same with aperture, lightroom, or any other external editor. See step 2 for directions to the right file:
http://barbarabrundage.com/?p=141

"Use RAW files with external editor" greyed out for Photoshop CS2?

I've just upgraded from iPhoto 5, and the "Use RAW files with external editor" option in the advanced preferences is greyed out when I select Photoshop CS2 as my external editor (back in the General pane).
It works fine when Preview.app is selected. I can understand that pre-CS2 Photoshop wouldn't be available, but CS2 is capable of editing RAW images.
Has anyone been able to get iPhoto 6 to send a RAW image to Photoshop CS2 using this preference? I've written an Applescript to do it in iPhoto 5, but I'd rather use something cleaner...
15" PowerBook G4 Mac OS X (10.4.4)

Works great with Photoshop Elements, opens with Camera Raw. The issue is you can't save it so that iPhoto gets the changes.
You have to save it and then re-import. I tried all permutations of saving it in originals and modified folders in the library. No luck. The only thing I didn't try is to save it as a jpeg over the top of the full sized one iPhoto created on import.

When trying to open in external editor I get this warning when going to Photoshop CS6: Could not complete your request because an unexpected end-of-file was encountered.

Aperture: When trying to open in external editor I get this warning when going to Photoshop CS6: Could not complete your request because an unexpected end-of-file was encountered. I can export and open via Photoshop or open directly from file-just not through external editor. Gerry

Hi gerry,
does this happen for a particular image only, or for all images?
And does this happen only from your account or also from other user accounts?
Léonie

I just installed Photoshop and want to use it as the external editor. I also have PS Elements on the computer and the only external editor I can get iPhoto to recognize is PSE. Any help in changing the external editor to PS would be appreciated!

I just installed Photoshop and want to use it as the external editor in iPhoto. I also have PS Elements on the computer and the only external editor I can get iPhoto to recognize is PSE. Any help in changing the external editor to PS would be appreciated!

Welcome. I am using Photoshop CS5 and this works fine for me. Possibly Adobe has changed this in CS6. Hopefully, LarryHN will have further suggestions. Best.

When Opening Soundtrack Pro 2.0.2: Unexpected Error "NSImageCacheException"

For some reason, when I open Soundtrack Pro 2.0.2, the application doesn't completely open. I have access to the File>New>MultrackProject (or Audio File), but when I make my selection, it give me this "An Unexpected Problem" NSImageCacheException Can't Cache Image.
I don't know what image the application is trying to cache but the entire application won't open because of it. I've tried reinstalling software and updates from Apple. Nothing at the moment.
Anyone know something about this?
Thanks in advance.

Delete the plist for the app.
Get digitalrebellion.com 's FCS Maintenance pack and use it to selectively trash the preferences. That usually fixes this sort of issue. If it doesn't, the next step is to use FCS Maintenance Pack to selectively remove STP, then reinstall it. Don't bother deleting/reinstalling the sound files.
Good Luck.

Need help with internal HD memory problems when using Premiere Pro?

When using PP I keep loosing memory on my HD.
Now this seems strange to me since I have every thing, all my video and audio files on external HDs.
Each time I time I make a new project I end up with less space on my internal HD.
Information related to these projects is somehow remaining on my internal HD.
Anyone got any ideas about what I might be doing wrong?
Dimitrije

Premiere will slowly compile various files to help the project along, and the default place is usually your internal hard drive. Make sure your scratch disks are pointed to an external hard drive if that is what you want, also, make sure the Media Cache Files are being created on your external as well (and not the default location which is on your local drive).
Premiere Preferences > Media
Media Cache Files & Media Cache Database should be changed to an external disk if you don't want them created on your local disk. There are many tutorials and explanations about all of these aspects of Premiere on these forums and from other sources. Hope that helps!

Why is the right hand side of the tables on a Word document that was imported being cut off using Webhelp but not when using Webhelp Pro?

I would prefer to use Webhelp and not Webhelp Pro because Webhelp allow for the insertion of a logo located to the right of the search field by selecting the "Show About" check box when generating content. The problem is that Webhelp is cutting off the words in the tables. Wordwrap is turned on in the Word document and the rest of the sentence will continue beneath the "cut off" word.

You would only use WebHelp Pro if you were using RH Server – that’s what the “pro” versions of output are for. I would suggest that something’s wrong with your table definition. You talk about a Word document – is this the source or the output you’re talking about?

Why is the layers panel greyed out when I try to use PSE9 as my external editor?

Recently, when I try to use Photoshop Elements 9 as my external editor in Aperture 2.1.4 the layers menu is greed out and the layers panel won't allow me to create layers.

Hello,
All outputs from the SCXI module are measured in differential mode. You can still mix differential and single ended measurements (if you use the remaining channels of your daq board).
The easiest way to mix modes is with virtual channels. All SCXI analog input channels will be differential, while you can make other virtual channels differential or single ended. If you don't want to use virtual channels, you can use AI Hardware Config in LabVIEW to change the mode.
Hope this helps. Regards,
John N
Applications Engineer
National Instruments

My webcam turns on when using Premiere Pro CC. How do I make this stop?

Got a weird one here folks...
It seems as though my webcam (Logitech C110) is turning itself on whenever I am using Premiere Pro CC.
When any window within Premiere is selected the green light besides the lens turns on...when I click "out of" Premiere...it goes off.
I seriously doubt Adobe is pulling some NSA-esque reconnaissance here. Does anyone else have this "problem" and if so do you know a way to fix this?
Best,
Alex

I believe this issue has been present since day one of signing up for CC. Anyone have a solution?

Amplitude increase when using Soundtrack Pro as external editor

Similar Messages

Maybe you are looking for