AMs and PMs - how to search for small-caps?

In my book I'm proofreading I have a mixture of (because I was undecided when I was putting it together):
i 7.00 a.m.
i 7.00 am
i 7.00am
I ran these three options past about twenty people this morning, 6 voted for the first, 8 voted for the second, 3 voted for the third, and 1 person and myself voted for the option I can't show properly here: small-caps: 7.00 AM. Then of course there was the wag who told me: "Why don't you just say '7 o'clock in the morning' "? And the complete ratbag who suggested, in the interests of avoiding confusion: "7.00 am o'clock in the morning before lunch at 0700 hours."
Before I make them all the same format, which will very likely be small-caps, I want to make sure I can easily search for them so I can replace with an alternative style if I change my mind again later on.
QUES: How do I search for "AM" and "PM" (spaces before and after) if they are formatted in small-caps? I can't use paragraph styles because the AMs and PMs appear in a variety of styles already.

Thanks for all the hints. I'm going to try some of them to see how they work. I should make it clear though (my original post may have been unclear about this) that I was asking how to search for AM in small caps AFTER I had changed all time-formats to that form.
As for why I asked for input: I treat my book a bit like a democracy and give people a chance to vote on certain aspects and make comments just in case they have a good idea that I hadn't thought of; but yes, I'm the boss, and in terms of votes mine counts for 95%. In this case, someone suggested using a colon -- which I have taken on board. So I will be using the time format 7:30 AM to see how it looks. But if I don't like it, I want to be able to find all the small-cap AMs and change them to something else in one go.
My interest in time-formats has stirred some interest locally. My partner proof reads a walking club magazine and she received the latest edition lat night. She has never concerned about time formats before, but after my foray into different options, she came up with the following variety (the club has lots of reports that include times when walking trips start and end), even though she thought she had done a thorough job of proof reading:
9 am
9.00am
9:00 am
9:00am
9.am
9 AM
9.00a.m.
9.00 a.m.

Similar Messages

How to search for upper/lower case using string using JAVA!!!?

-I am trying to write a program that will examine each letter in the string and count how many time the upper-case letter 'E' appears, and how many times the lower-case letter 'e' appears.
-I also have to use a JOptionPane.showMessageDialog() to tell the user how many upper and lower case e's were in the string.
-This will be repeated until the user types the word "Stop".
please help if you can
what i have so far:
[code]
public class Project0 {
public static void main(String[] args) {
String[] uppercase = {'E'};
String[] lowercase = {'e'};
String isOrIsNot, inputWord;
while (true) {
   // This line asks the user for input by popping out a single window
   // with text input
   inputWord = JOptionPane.showInputDialog(null, "Please enter a sentence");
   if ( inputWord.equals("stop") )
    System.exit(0);
   // if the inputWord is contained within uppercase or
   // lowercase return true
   if (wordIsThere(inputWord, lowercase))
    isOrIsNot = "Number of lower case e's: ";
   if (wordIsThere(inputword, uppercase))
     isOrIsNot = "number of upper case e's: ";
   // Output to a JOptionPane window whether the word is on the list or not
   JOptionPane.showMessageDialog(null, "The word " + inputWord + " " + isOrIsNot + " on the list.");
} //main
public static boolean wordIsThere(String findMe, String[] theList) {
for (int i=0; i<theList.length; ++i) {
   if (findMe.equals(theList[i])) return true;
return false;
} // wordIsThere
} // class Lab4Program1
[/code]

So what is your question? Do you get any errors? If so, post them. What doesn't work?
And crossposted: how to search for upper/lower case using string using JAVA!!!?

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i

If you are missing using google maps - try the Nokia map app called "here"

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i have it set at "Use new precise locations from my device."

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i have it set at "Use new precise locations from my device."

If you are missing using google maps - try the Nokia map app called "here"

When I am searching for any particular song or album from my shared ITUNES folder, the search is conducted in the apple store and not on the shared library. How to search for the song in the shared library

I am using IPAD Mini.When I am searching for any particular song or album from my shared ITUNES folder, the search is conducted in the apple store and not on the shared library. How to search for the song in the shared library

Search for shared library is impossible, as far as I know. Searches supported - are local and internet.

How to search for a BADI in a transaction

Hi All,
Please let me know the steps to find a BADI for a transaction.
Thanks,
Jaffer Ali.S

check this.
u can find BADI's in different ways...
1>First go to any transaction->iN THE menu bar SYSTEM->STATUS->Get the program name ->double click->u will go to the program attached to the tcode.Now search term will be CALL CL_EXITHANDLER.Now u will get list of BADI'S available..
2>Goto SE24->Give class name as CL_EXITHANDLER->Display->double click on get_instance mathod->Now u will go inside the method->Now put break point on the cl_exithandler.Now go to any transaction code and pass dat..U will see that it will be stopped on the break point which u set on the cl_exithandler...In the exit name u can find list of badi's attached to the tcode..
There are multiple ways of searching for BADI.
Finding BADI Using CL_EXITHANDLER=>GET_INSTANCE
Finding BADI Using SQL Trace (TCODE-ST05).
Finding BADI Using Repository Information System (TCODE- SE84).
1. Go to the Transaction, for which we want to find the BADI, take the example of Transaction VD02. Click on System->Status. Double click on the program name. Once inside the program search for CL_EXITHANDLER=>GET_INSTANCE.
Make sure the radio button In main program is checked. A list of all the programs with call to the BADIs will be listed.
The export parameter EXIT_NAME for the method GET_INSTANCE of class CL_EXITHANDLER will have the user exit assigned to it. The changing parameter INSTANCE will have the interface assigned to it. Double click on the method to enter the source code.Definition of Instance would give you the Interface name.
2. Start transaction ST05 (Performance Analysis).
/people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it
3. Go to Maintain Transaction (TCODE- SE93).
Enter the Transaction VD02 for which you want to find BADI.
Click on the Display push buttons.
Get the Package Name. (Package VS in this case)
Go to TCode: SE84->Enhancements->Business Add-inns->Definition
Enter the Package Name and Execute.
Here you get a list of all the Enhancement BADIs for the given package MB.
The simplese way for finding BADI is
1. chooes Tcode Program & package for that Tcode.
2. Go to Tcode se18
3. Press F4
4. search by package or by program.
Regards
Kiran Sure

How To Search For a Specific File name?

Hello Everybody
How To Search For a File Like NewFile.txt in a Root Like C:\\
And If The File Is Found Open It And Write In It?

http://forum.java.sun.com/thread.jspa?threadID=5194090&messageID=9763314

How to search for a fields ?

Hello,
I know it's an easy question but I've not find, how to search for a fields in Database on CR XI R2 ?
Thanks in advance

Hi Alexandre
Do you want to see which database fields you have inserted in Crystal Reports and in which section you have inserted what fields?
If yes then
-open formula editor
-In the right side pane expand Formatting Formulas.
-Expand all the sections one by one and it will show you database fields,formulas and all the objects used in the sections.
Hope this will clarify your doubts.
Regards
Asha.

How to search for a badi

how to search for a badi
srinivas.

Hi Srinivas,
Good
Check this link
/people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it
Run this program
*& Report ZNEGI16 *
REPORT ZNEGI16 .
TABLES : TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA wa_tadir type tadir.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
endcase.
Solution 2
1.Get the Package of the program name of the transaction.
2.Go to Transaction SE18.
3.Press F4 on the badi definition name.
4.Click the information systems button.
5.Give the Package name and press enter.
6.Select the BADI that is relevant to the application.
Good Luck and thanks
AK

How to search for a word in an email?

How to search for a particular word in an email in 'Mail'?

You can't search through email content using buil-in search
If you're using Gmail, you can use their native Google Mail app which will allow you to search through body content and server-stored emails.

How to search for password policy

Hello,
Using DS 5.2:
I've created a test policy, dn: cn=Test Policy,ou=People, o=xxx, o=isp. I can apply the policy, I can see the policy in my backup ldifs, but I can't figure out how to search for and display it (and eventually, delete it) either from the command line using ldapsearch or form within the admin gui. Any help?

What I would like to do is query my 8i instance for the current password policy
Can anyone provide a query to retrieve this info?connect as sys
in Oracle 8i and issue the command;
select object_name,object_type from all_objects where object_name like '%PASS%';
and
select object_name,object_type from all_objects where object_name like '%POLICY%';
I think , i'm not sure these policies would be transfered to 10g through migration except -if any- some of them are obsolete to 10g!!!!!
Regards,
Simon

HT204266 how to search for a specific app eg tetris in the app store?

Hi is there anyone that can please help me on how to search for a specific app eg tetris in the app store? Thanks

Hi Friend,
You just write down the name of the app or for what the app is used for (eg, write down Notes and then will appear a lot of options), then download what you wish.
Hope it will be helpful

How to search for a particular pattern in a string

Hi,

Hi ,
How to search for a particular pattern in a string?
I heard about java.util.regex; and used it in my jsp program.
Program I used:
<% page import="java.util.regex"%>
<% boolean b=Pattern.matches("hello world","hello");
out.println(b);%>
I run this program using netbeans and am getting the following error message.
"Cannot find the symbol : class regex"
"Cannot find the symbol : variable Pattern "
How to correct the error?

How to search for available class in given package?

How to search for available class in given package or sub package?

Finally i did it. I make hibernate and spring without much configuration. I just pass the package pattern to search for all bean. I named it package pattern injection.
My website is still under construction yet. It named Jimmy6 Framework.
The code it just the following for all hibernate and spring bean for the whole project.
<bean id="sessionFactory" class="com.j6.framework.JAnnotationSessionFactoryBean">
          <property name="annotatationOrHbmXmlPackagePattern">
               <list>
                    <value>com\.j6\.project.+?\.vo\..+?</value>
               </list>
          </property>
<bean id="autoBeanCreatorFactoryManager" class="com.j6.framework.resource.AutoBeanCreatorFactory">
          <property name="packagePatterns">
               <list>
                    <value>com\.j6\.project\..+?\.manager\..+?</value>
               </list>
          </property>
     </bean>
     <bean id="autoBeanCreatorFactoryDao" class="com.j6.framework.resource.AutoBeanCreatorFactory">
          <property name="packagePatterns">
               <list>
                    <value>com\.j6\.project\..+?\.dao\.hibernate.+?</value>
               </list>
          </property>
     </bean>Feel free to have a look and gv some comments. Thanks :)
Regards,
Jimmy6
Edited by: jimmy6 on Nov 4, 2008 8:15 AM

Please answer. how to search for files

Hi,
We need an integration with SAP. They send us files in the format: yyyymmddhhmiss.atv
For example we receive following files:
20050503101115.atv
20050504101115.atv
20050505101115.atv
So, we dont know how to search for all files with extensions ".atv" in the directory.
We are using PLSQL. Is there some way to resolve with UTL_FILE?
Any other suggestion?

A possibility:
In sqlplus, issue a HOST command to list the files to a file:
ls *.atv > atv_dir.txt
Then use utl_file to read atv_dir.txt and parse it for the file names.
You could put the filenames in a pl/sql table and use that as loop control.

AMs and PMs - how to search for small-caps?

Similar Messages

Maybe you are looking for