Amulet Display : Is it possible to pilot pixels one by one ?

Hi,
I would like to know if it is possible to pilot AMULET pixels one by one to generate a moving object ? (here is a ball)
The purpose would be to do a ping pong game application on it.
Commands will be two potentiometers from AI module giving order to two racquets designed on the AMULET.
Anyone already tried this out ?
BR,
Vincent

Hi Nalani500 ,
Yes, you can print the response in a PDF by following the steps suggested below.
1) Go to the response file
2) Select the response you want to print
3) Click on Save as PDF button and it would save the selected response in PDF format.
Thanks,
Vikrantt Singh

Similar Messages

I have 2 displays 1920 and 3840, use 1920 for every day work, some pages I would like to open in 3840 display, is this possible?

I have 2 displays 1920x1080 and 3840x2160,
I use 1920x1080 for every day work, some pages I would like to open in or redirect to the 3840x2160 display, is this possible?

No, but there is a developer tool that you can add a custom size to. It is called Responsive Design View.

Change my display for a matte or anti-glare one

Hello.
I've got a new G580 laptop, but I found really annoying and unuseful the glare screen.
I've tried to put over a protector film, but it's even worse because it makes some bubbles in between the film and the display.
so, is it possible to change my display for a matte or anti-glare one? is there any other solution?
Thanks.

Hi Akronix,
Welcome to Lenovo Community!
I’m sorry to hear about the situation and the display cannot be replaced by other type of displays and the only available option is to use a protector film, I suggest you to get the protector film on the Laptop by an expert to avoid bubbles on the screen.
Do post us back for further queries.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

I'm wondering if there is any way to view the results of the form other than in a spreadsheet? Is it possible to print responses one by one in PDF format, or word, etc? I'd like to create a form for proposal applications, and the spreadsheet format resu

I'm wondering if there is any way to view the results of the form other than in a table? Is it possible to print responses one by one in PDF format, or word, etc? I'd like to create a form for proposal applications, and the spreadsheet format results are nearly unusable for this type of form.

Hi Nalani500 ,
Yes, you can print the response in a PDF by following the steps suggested below.
1) Go to the response file
2) Select the response you want to print
3) Click on Save as PDF button and it would save the selected response in PDF format.
Thanks,
Vikrantt Singh

While executing TCode F13 and F13E, purchase order number is not appearing.how it should be displayed into tcode f.13, please any one help me

While executing TCode F13 and F13E, purchase order number is not appearing.how it should be displayed into tcode f.13, what are the requirements need to display into tcode f.13, please any one help me, i am facing this problem in production server

Hi Nattu,
Please check it will show the PO no under Purchasing doc field
Check which layout you are applied.
its should be
SAP&F124
Without Specification of Crcy
Regd,
Khan.

Is it possible to download just one playlist onto my husbands new ipod nano

Is it possible to download just one playlist onto my husbands new ipod nano (16gb) from my Macbook pro version 10.6.8. and is so how?

Hello sylviafromkendal,
With an iPod, you are able to sync music from multiple iTunes libraries to the device. If the iPod is configured to manually manage the content, then please follow the directions in the first article below. If that is not the case, then you will need to enable the manually manage music and videos option is turned on.
Manage content manually on your iPhone, iPad, and iPod - Apple Support
Thanks for using the Apple Support Communities!
Cheers,
Alex H.

Why is the australian MacBook pro with retina display far more expensive then the American one when the Australian dollar is much stronger

Why is the australian MacBook pro with retina display far more expensive then the American one when the Australian dollar is much stronger

this is a user response forum, i'm not sure what you think we will know. Apple doesn't reply here. you would probably have to contact the main Apple HQ in Australia to have a chance to get any kind of answer.
previous thread on this: https://discussions.apple.com/message/15987962#15987962

Two NICS presented to OS, possible to only present one ?

B200-M1 blades and Menlo CNA.
The SPs are using a dynamic vNIC templates with fabric A or B selected and F/O enabled.
What we're witnessing is the OS will always be presented with two NIC's. Depending on which Fabric A/B the SP is set to determins which NIC is active. eg : In Linux eth0 & eth1 are detected. If the SP points to A eth0 is active, and B then eth1 is active.
My question is : Using the Menlo card is it possible to present only one NIC to the OS and still retain f/o ?
We use a number of auto config tools and really want consistency on which NIC is active but also still want to use both A & B fabrics. Rather than assigning all SP' to A.
Paul

Paul
These are 2 static PCI devices (with device numbering) which the OS will show.
Default behavior with Menlo (linux terminology):
Lets say you don't create any vNICs in a SP and give it to a Menlo adapter based blade.
Your ifconfig should show eth0/eth1 while the link on both will be down (i.e unusable as the FI side config isn't done).
If you create 1 vNIC (side A), your eth0 will have link up with correct VLANs, eth1 down.
If you create 1 vNIC (side B), your eth1 will have link up with the correct VLAN, eth0 down.
It is for the way OS enumerates the devices. The first ethernet device is wired to side A.
You could potentially try changing the HWADDR/MACADDR in the /etc/sysconfig/network-scripts/ifcfg-eth[0-1] files to see if it works for you i.e assign an ip based on it.
With M81KR as I mentioned before you don't have this issue. You can call out the PCI order, number of devices and which vNIC goes to which side.
So 2 vNICs created in the M81KR could both be going to side A for example. This vNIC config will fail on a Menlo.
Is the use case that for a singly attached server, you are trying to do half the blades use Side A while the other Side B while maintaining uniformity in your imaging tools?
--Manish

Is it possible to Lock just one column value in a row?

Is it possible to Lock just one column value in a row
A Java Developer has just asked me if it is possible to Lock just one column value in a row in Oracle
select ename from emp where empno=7369 for update;
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7369 SMITH CLERK 7902 17-DEC-80 800 20
will lock the entire row with empno=7369.
But is it possible to lock one column value from this row, like SAL=800 ?
Edited by: J.Kiechle on Jan 8, 2009 10:45 PM

J.Kiechle wrote:
Is it possible to Lock just one column value in a rowNo. Locking granularity is a row.

What iphone should i get im a young teen want as cheap as possibly thinking of getting one on kijij should I?

what iphone should i get im a young teen want as cheap as possibly thinking of getting one on kijij should I?

No. Get one from your carrier or from Apple. Most of the cost will be the monthly service, not the cost of the phone. Many carriers will give you an iPhone for free if you agree to a 2 year contract.

Is it possible to update only one java file in my application bundles without re-deployment?

For Example,
i have a Application.java file in my application-bundles.jar and it is running.
I need to add a new method in Application.java file alone while the instance is running.
I know we can change .jsp file through CRX-DE lite, but looking for .java files.
is it possible or can some one suggest an idea on this?

Hi kalimisetty,
It is part of bundles. It needs recompilation & deployment. Though server restart is not required.
Thanks,
Sham

ITunes Show View Options - Display an option for all playlists in one go??

Hi there
Ive got about 200 playlists and need to show the same option for each (BPM).
How can I tell iTunes to display the BPM in ALL playlists in one go?
I can't manually select it from
View
Show View Options
Tick BPM
Close Show View Options
on all 200 playlists, it would take far too long.
Any help?
Thanks

iTunes does not provide a way to do that. When a playlist is first created, it inherits the "View" from how the Music library is set at that point in time. From then on, changes to its View settings are independent of all other playlists.
There may be a script somewhere that helps. Otherwise you have to do them one at a time.
It can however, be done with fewer clicks than you state. Right-click any column header (preferably the one to the left of where you want BPM to show) and click the item "Beats Per Minute."

Is it possible to copy the one whole scenario to another scenario ?

Is it possible to copy the one whole scenario to another scenario ?
Means i have the same data types, msg types and msg interfacess,................ all are same except the adapter then is it possible to copy the whole previous scenario, if yes how ?

Hi,
Probably you could do below steps to achive your requirment
1. Right click and Copy the integration scenario of IR.
2. A poup-up window will et open and will ask fro the location in Software component and there is one check box available that to select the all related objects also.
3. If you take the anoher namspace or software component and mark the check box then new scenario with same data type, msg typs and interface will be created.
Thanks
Swarup

Option Click on the Volume menubar icon doesn't display ALL airplay devices, just the last one used

Option Click on the Volume menubar icon doesn't display ALL airplay devices, just the last one used. I've seen other peoples display all their devices. Why can't I?

I've discovered that those screenshots where you see more than one speaker listed in the menubar icon are actually bluetooth devices, not airplay. When you check the shot of the system preferences pane and see them all listed there too, the Type says Bluetooth. Not sure why bluetooth gets them all listed and apple's own airplay standard does not. Hope a developer writes a mac app to do it!

Possible to sync just ONE Gmail contact group?

So I'm wondering if it's possible to synchronize just one Gmail contact group with my Blackberry contacts. Like, I have about 15 Gmail contact groups -- one group for co-workers, one group for publicists who send me press releases, one group for friends, etc. I only want the addresses in my friends group to be sync'd with my Blackberry. Is this possible? Or do I have to let them all sync, and then manually delete the contacts I don't want from my Blackberry?

Hey eggcream,
The contact list "My Contacts" is the list that synchronizes.
You can remove this label in your Gmail contacts from those of whom you do not wish to have synchronized over.
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Amulet Display : Is it possible to pilot pixels one by one ?

Similar Messages

Maybe you are looking for