An accounting document is not required for this billing document

Hi,
While releasing the billing document to accounting the error is coming like "An accounting document is not required for this billing document"
Diagnosis:
The billing document has the net value '0' and does not create an accounting document. Despite this, the posting status 'C' (Posting document has been created) is set internally for this billing document.
But the net value is coming in the sales order and alsi into the Billing document.
gurus plz help me.
regards,
ragesh.

Goto VOFA screen and check for ur billing type , what is assigned in the document type field?.
Also please check, the posting block is activated. if it is, please remove.
Also goto the accounting document type settings at OBA7, check whether the customer field is ticked under the account type allowed tab.
Please let me know, whether ur problem solved..
Reward points if useful..

Similar Messages

  • "Document is not licensed for this device"

    I bought a law book through digital editions awhile ago and authorized it on my laptop at that time.  Since then, i have wiped the laptop and switched to a desktop computer.  When I tried authorizing the book on my desktop, it is saying the document is not licensed for this device.  Is there any way to fix this? I dont have the original laptop anymore.

    OK - here's the issue.
    When I downloaded Adobe Digital Editions I authorized my computer with my Adobe Account - apparently I wasn't supposed to do that.  McGraw-Hill said that their file would ONLY work if the computer was not authorized with an Adobe Account (they should have said so after the order).
    So after de-authorizing the account (ctrl+shift+d) I tried to open up the .acsm file again and I got a new error: e_lic_already_fulfilled_by_another_user.  I'm afraid that the license was used up by Adobe Account, never mind that it actually never downloaded.
    I guess the next step is to try and get another license issued?

  • Textbook download error message: "Document is not licensed for this device type"

    Hi everyone,
    I bought a textbook that came with a free digital edition. I downloaded it, then tried to load it into Digital Editions (which I registered to my account). The texbook almost finished importing, then at the very end gave me an error message that said "[The name of the book]: Document is not licensed for this device type." The textbook is published by Aspen Law. I'm running Mac OS X 10.7.1 (Lion). Has anyone else had a similar issue or know of a resolution?
    I've looked at other forum posts, and my situation seems remarkable like this one:
    http://forums.adobe.com/message/3098928#3098928
    I called the publishing company and tried to explain this to them, but they just said it was a problem with Adobe and Mac.
    Thanks in advance,
    Chris

    OK - here's the issue.
    When I downloaded Adobe Digital Editions I authorized my computer with my Adobe Account - apparently I wasn't supposed to do that.  McGraw-Hill said that their file would ONLY work if the computer was not authorized with an Adobe Account (they should have said so after the order).
    So after de-authorizing the account (ctrl+shift+d) I tried to open up the .acsm file again and I got a new error: e_lic_already_fulfilled_by_another_user.  I'm afraid that the license was used up by Adobe Account, never mind that it actually never downloaded.
    I guess the next step is to try and get another license issued?

  • Mapping Error: Mappings are not required for this Integrator

    Hi,
    when I created my upload integrator with the Desktop Integrator Manager (12.1.2) I am not able to attach a mapping to it. I get the following error:
    Mapping Error: Mappings are not required for this Integrator because the ability to download information has not been enabled.
    Does anyone know what I've missed?
    cheers
    Jeroen

    Hi ,
    Without creating the content if you are trying to do mapping this error will come.
    Solution:
    Create the content and then do mapping..
    Regards,
    Sreekanth.S
    Edited by: user12045904 on Dec 9, 2010 10:55 PM

  • Accounting document not created for the  billing document in CIN

    Hi Experts,
    I have made conditon records for BED, CESS, Edu Cess and VAT. I hve defined the accounts in both excise transactions and VKOA Settings even then the accounting document is not getting created. I am getting the following error.
    No account is specified in item 0000001003
    Message no. F5670
    Help to solve the above
    Thanks in Advance

    Open the document in VF02 / VF03, go to Environment -> Acct. Determination Analysis -> Revenue Accounts.  (You can also press CtrlShiftF12).  There check for the item no. 1003.  You'll find no account has been determined for this item through any procedure. 
    In the right pane, it will also give other details like CoA, Sales Org etc (as per your access sequence) which it tried to find the account for.  Assign an account for that combination in VKOA and then try to release the doc for accounting.  It should work if you have assigned correctly.
    Ravi.

  • COPA document is not visible for a material document ?? Why

    Hi Experts,
    We have a material document, for which we have accounting doc and CO document respectively. But we don't have a PA document(not Visible). Any Idea why it is not visible.
    Moderator: Please do not ask basic questions

    Hi ,
    I am really very much appreciate your cooperation for the issue.
    When i try the same through KE4S in test run system is showing the below lines.....
    Number of billing documents read:                        1
    Number of line items to be transferred:                  0
    No. of billing doc. items already transferred:           0
    Number of billing docs with errors:                      0
    Note:- Number of line items to be transfered  0  then there is nothing to transfer to COPA.
    Please suggest.

  • Profit center document is not created for invoice cancellation document.

    Hi all,
    when i create the invoice, Profit center document is getting created,
    where when we try to create a cancellation document for the same invoice, Profit center document is not getting created,
    can anybody let me know where can i check this problem??
    and can u let me know Profit center document creation is dependent on BILLING DOCUMENT TYPE?
    Thanks in advance,
    Krishna Dussa

    Hi Krishna
    First of all Check wheather Profit center is there or not in the Material master record when you are cancelling the billing document..If it is there then with the help of your ABAP team ,ask them to debug by putting once you run VF11
    Regards
    Srinath

  • Accounting documents are not posted for Excise invoice

    Hi,
    1. The Excise invoice has been created with reference to F2 invoice but the accounting documents is not posted for excise invoice, what is the settings needs tobe maintained to post the accounting entries to excise invoice..?
    2. where we will maintain number ranges for excise invoice..?
    Thanks
    Rao..

    hi
    1. The Excise invoice has been created with reference to F2 invoice but the accounting documents is not posted for excise invoice, what is the settings needs tobe maintained to post the accounting entries to excise invoice..?
    Not sure but can u try to relese this to accounting
    2. where we will maintain number ranges for excise invoice..?
    Excise invoice number range is depend on Excise series group.
    T-Code : SNRO
    Following is the No. Range Objects related to Excise, select the proper no. range object as per your requirement.
    J_1I57FC - 57FC Number Range
    J_1IARE1 - ARE1 Doc No object based on Series Group
    J_1IARE3 - ARE3 Doc No object based on Series Group
    J_1IBOND - Excise Bonding: Bond number object
    J_1ICERT - Withholding Tax Certificates (India)
    J_1ICHLNNO - Internal number range for challans
    J_1ICONPLA - Consolidated PLA serial no. generation
    J_1IDEPINV - Excise Invoice Number for Depot Invoices
    J_1IEXCEXP - Export excise invoice number range
    J_1IEXCINV - Excise invoice number
    J_1IEXCLOC - Local excise invoice numebr range
    J_1IEXCTST - Excise invoice with intervals
    J_1IEXINEX - Excise invoice number for export
    J_1IINTNUM - Internally document number to be generated
    J_1IINTPR2 - Despatch serial number
    J_1ILIC - Excise Bonding: License number object
    J_1IPLA2 - PLA part II number range object
    J_1IRG1 - RG1 Number range object
    J_1IRG1_T - No. Range for RG1 - Excise group / Material
    J_1IRG23A1 - RG23A part 1 no. range object
    J_1IRG23A2 - RG23A part II number range object
    J_1IRG23C1 - RG23C part I number range object
    J_1IRG23C2 - RG23C part II number range object
    J_1IRG23D - Folio Numbers for RG 23D
    Check the link
    Re: Excise Invoice Number Range
    excise invoice and domestic invoice sharing same number range

  • Solutiom for EXCISE INVOICE NOT CREATEED FOR THIS DOCUMENT

    hi,
      wlhile i want print preview in transaction VF03/VF02 for a particular biiling document number ,  i get the  error message  "EXCISE INVOICE NOT CREATEED FOR THIS DOCUMENT" .what is the solution?

    HI Tej
    All the Import cycle has created three documents.
    1. MIRO doc for custom duties and CVD .--   MIRO posted in USD .  I can see the doc in both currency -  INr and USD via accounting doc - display currency.  I do not have any issue.
    2. MIGO doc - for custom duty and Freight -   MIGO posted in INR , I can see accounting doc in USD and INR both via accounting document-  Display currency and even in the MIGO -- purchase order history tab.
    3. Excise Invoice - for CVD -  EX Invoice posted in diifferent way --
    In this document please note amounts for CVD is as per USD rate , but currency showing is INR , which is a mismatch.
    in Excise customization for company code setting - exchange rate type M is maintained. OB08 is also maintained for USD/INR
    Condition type JCV1 is also marked with currency conversion and accruals.
    Is there any patch or note I need to apply to getting this converted , or any process issue.
    Regds
    Mukta

  • Itune 10.5 (64-bit) A program required for this install to complete could not be found...help!

    Attempted to update Itunes to 10.5 (64-bit) tonight.  About 20 seconds after it begins installing, it pauses and gives the following message,"There is a problem with this windows installer package.  A program required for this install to complete could not be run.  Contact your support personnel or package vendor."  Then, it backs out.
    I got on the Apple support pages and after reading some posts decided to delete the appData/Local/Temp directory as instructed, but to no avail.  This was not easy because windows cannot delete the file "FXSAPI Debuglogfile.txt" I was able to go through features and turn off document printing, which allowed me to delete the file....all to no avail.  After this, tried uninstalling my current Itunes version, and then installing the new version, but that did not work either.  Can't Apple include the prgrams required to install this new itunes update?  Do not understand and am frustrated.  I've spent several hours and would apprciate some help.  Seems everytime Apple comes out with an new Itunes version there are problems!!!

    I had the same prob..
    I tried repaiering Itunes 10.4 as described above - no effect. Then I deinstalled 10.4 completly.
    Reinstalling 10.5 did not work after that.
    Then I tried repairing "apple Software update" in control panel.
    Now I could also install 10.5 - and all old data still there.
    Hence - The problem seems to be in "Apple Software Update" Software

  • I have a G5 and bought and upgraded to osx 10.5.  now i need to upgrade to 10.5.6 or higher, but when i download and try to install, i get message "this volume does not meet requirements for this update".

    i am trying to sync an ipad to a power mac g5.  i bought and upgraded to osx 10.5 and have tried to download and 10.5.6 or higher, but i keep getting same message:  "you cannot install mac os x update on this volume.  this volume does not meet requirements for this update".  help!

    Mac OS X 10.5.8 Combo Update
    Java for Mac OS X 10.5 Update 5
    To me, in all such updates, goes without saying maybe: backup, repair permissions, repair your drive (Disk Warrior does more reliable and thorough job, and it comes out to pennies if you don't wait until needed). Clone your system so you can restore or use the backup - just in case.
    I'd even do a fresh format after your clone is done and do a full OS clean install and update, and then a quick import from Setup Assistant.
    Mac computer with USB 2.0 port
    Mac OS X v10.5.8 or later
    iTunes 10.2 or later recommended
    (free download from www.itunes.com/download)
    iTunes Store account
    Internet access
    I'm going to assume there is something with the partitions on the drive, partition table most likely, though I know I've seen others with that error message - doesn't really point to cause, rarely does (make sure latest firmware update etc is sometimes included but again, we know that isn't why).

  • Whenever I try to update iTunes to 10.5 I get the message 'There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor.'

    Whenever I try to update iTunes to 10.5 I get the message 'There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor.'
    I then uninstalled iTunes to try and reinstall it but I still get the same message for both 10.5 and previous versions, please help!

    My situation:
    - get error when updating iTunes from 1041 to 1050 or above: "There is a problem with this Windows Installer Package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
    My system: XP SP3 with all latest updates.
    Found out that the 1051 update fixes a major intrusion possibility during the update process, so I want to get iTunes upgraded to 1051.
    Did more research and the following worked (not known if all steps outlined were necessary) (I do not guarantee success nor any more issues as a result):
    - ran: MicrosoftFixit.ProgramInstallUninstall.exe (did JUST the patch option).
    - ran: Windows Installation Removal Tool.exe (uninstalled JUST the iTunes program installer folder) (this does not remove the actual program).
    - removed all apple software update registry entries.
    - removed: C:\Documents and Settings\All Users\Application Data\Apple\Installer Cache\(JUST the software updatefolders) (hidden folder).
    - removed: C:\Documents and Settings\current user\Local Settings\Application Data\Apple\(JUST the software  update folders) (hidden folder).
    - DID NOT need to restart
    - downloaded latest iTunes update (1051)
    - opened using WinRAR
    - extracted all files
    - ran JUST the apple software update MSI
    - it succeeded
    - ran JUST the iTunes MSI
    - it succeeded
    - normally I then uninstall the apple software update program, but DID NOT this time
    - DID NOT need to restart
    Hope it works for you.

  • My iPhone wont let me download some apps that i have payed for on on my account; it says my iPhone is not authorized for this computer, but it is.

    My iPhone wont let me download some apps that i have payed for on on my account; it says my iPhone is not authorized for this computer, but it is.

    No, iTunes never says an iPhone is not authorized.
    This is occurring on a computer, correct?
    Is the computer authorized for the account the media or apps were acquired with?

  • I am trying to install iTunes on my PC, but I get this error: "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor." Help!

    I am trying to install iTunes on my PC (using Windows 8.1), but I get this error: "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor." The iTunes file (64-bit) I am trying to install, is named "iTunes64Setup.exe". What seems to be the problem? Help!

    Hey madnest,
    Thanks for the question. After reviewing your post, it sounds like you are having difficulty installing iTunes in Windows. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    Issues installing iTunes or QuickTime for Windows
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • I get the errer message "There is a problem with this windows installer package. A program required for this install to complete could not be run."

    I have Wondows Vista... I tried to upgrade to Itunes 10.5, and received an error orginially stating that I was trying to install a version older than the one I had.  I uninstalled all of itunes, and now I'm getting the error  message "there is a problem with this windows installer package.  Aprogram required for this install to complete could not be run.
    Help!  I have an IPhone, and I would like to get my Itunes upgraded so I can download the new Iphone software...
    Thanks!

    I have been in touch with Apple support in reference to my problem. We went through every solution available, and found no fix. The tech then suggested I contact Microsoft concerning this issue. I thought that suggestion was just to get me pointed somewhere but Apple. Boy was I wrong!! I contacted Microsoft, and was directed to a free download called Microsoft Fix. This program fixed something in the regisitor, and wala everything was fixed!! I now have I-Cloud and I-Tunes loaded and working well. So, if you can't install Apple Software and are running Window 7 you might give Microsoft Fix a try, it fixed my problem.....

Maybe you are looking for

  • Issue in using custom event from outreach

    Hi I have created a custom event and executed a scenario successfully for this custom event from ACC. But when I try to configure the same event from Outreach(BCC), I am able to see this custom event in the list of available events, but after selecti

  • Examples of 7 to 9i upgrade wanted

    My organisation is a charity (NGO) in the U.K. We are considering upgrading from 7 to 9i on Unix and I have been asked to gather general information about pitfalls and issues. Is there anybody who could provide me with a case study of a similar situa

  • What is document date? When will you use it?in A/R invoice  in SAP B1

    Hi I would like to know the meaning of document date for A/R invoice  in sap b1. when will u use? and How will u use it? I know Posting Date is date when u add invoice Due Date is a last date that customer have to pay you. But I don't know document d

  • Image size and Color Adjustments

    I know for sharpening purposes, it's best to sharpen an image the size it is going to print. But is the same true for white balance/color corrections, contrast and tonal adjustments?

  • Serial Number says activated elsewhere but it's been deactivated

    I purchased the Adobe eLearning Suite a while ago.  Last month I had a problem with my laptop so, our IT department changed out my shell for a new shell.  In doing that I started getting an error message when trying to use Photoshop (didn't try other