An actionscript error has occurred

I get an error on the Adobe flash player site appear this error
Looking forward to help overcome the load will fail because it is very inconvenient
[IMG]http://a.imageshack.us/img836/9670/i66g.png[/IMG]
p / s: I spent Flash player plugin 13 and windows7 32 bits

Actionscript is in the Flash container.
Unless you see this everywhere you view Flash content... it's in that specific page.

Similar Messages

Error 2007 Some Actionscript error has occured

I have tried the converter on a couple of modules that I have been working. I have actually tried it on two differnet machines to make sure there wasn't something machine specific. I am getting Error 2007 - Seom Actionscript error has occured. Has anyone seen this? Any idea what is casuing it?
I have just begun my exploration of the converted and this is my first couple of attempts so I could be doing somethign really obvious.
This is a very basic simuation module with not much more than captions and click boxes.

I've installed twice and always run as admin but same issue. If you hear anything else please let me know.
Kerry Kuehn | Senior Vice President of Learning
3333 East Camelback Road, Suite 212
Phoenix, AZ 85018
602.840.1000 office
816.695.3260 cell
602.957.3057 fax
[email protected]<mailto:[email protected]

Adobe Flash Player 10: An ActionScript error has occurred?

Whenever I browse the web with Firefix, I get this sort of error message if the site uses Flash:
Adobe Flash Player 10
An ActionScript error has occurred:
Error #2044: Unhandled ioError:. text=Error #2032: Stream Error. URL: http://content.openforum.com/membersproject/getContentList.jsp?numitems=3&pillar=CAUSES
    at dtas.mp.polite::Politeness/dataLoaded()
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at flash.net::URLLoader/onComplete()
This only started happening when I upgraded to CS4 Professional. Does anyone know why this is happening?

first go here and check if you have the debug player: http://kb2.adobe.com/cps/155/tn_15507.html
if yes, you can download from here: http://get.adobe.com/flashplayer/
(be sure to untick that mcafee garbage.)

An flash ActionScript error has occurred

so i keep getting action script errors, when looking on here for answers it seems other people have had this problem as well for a while. i am pretty sure it is due to the ads, and i am pissed that the 8.1 skype client refuses to work now and i am forced into using this crappy disktop client that keeps giving me errors due to ads! i do not want ads! i have skype 7.7 and flash 18. i have uninstalled and reinstalled skype, it hasnt helped. i have also had flash issues in my web browser and had to install the ad block plus extention to stop the flash ads. why the heck does skype have to have ads for pc!?

If you are getting constant actionscript errors then you more than likely have the debug version of Flash for IE installed. To resolve those error you would need to completely uninstall Flash and install the standard version of Flash. https://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html Download and install the latest version of Adobe Flash for IE ( currently 18 )
https://admdownload.adobe.com/bin/live/flashplayer18ax_ha_install.exe To not get ads all you need need to do is have an active credit balance. My credit balance has sat in my account unused for years. Ads are used in free and paid TV so I don't see an issue with ads when using free services though I question the execution of ads. There's always a bill to be paid and even free TV isn't funded by paying customers.

An ActionScript error has occured - Flash Player

Hello,
I keep getting this kind of errors whenever I visit a website that has adobe flash on it and it is very very annoying guys, please do something about it. It doesn't happen on all websites but but quite frequently I'm using the latest Firefox build and latest Adobe Flash v14.
Please solve this issue. Thank you.
Another example is when I want to upload an image on http://imgur.com, again the error appears:
TypeError: Error #1010: A term is undefined and has no properties.
at SWFUpload/onFilesLoaded()[C:\Users\Jacob\Documents\Imgur\SWFUpload\core\swfupload_fp10\SW FUpload.as:729]
Print Screen: http://i.imgur.com/yu89WX0.jpg

I think so, I've got this version installed: http://download.macromedia.com/pub/flashplayer/updaters/14/flashplayer_14_plugin_debug.exe

Another Compiler Bug (message: An internal build error has occurred... Unknown Flex Problem)

I was fighting with this problem for a few days. Finally I've got it resolved. I want to describe it and fill in BUG in the bug report, but I am not sure about Adobe support options. So, I am putting bug report here.
1. ASSUMPTION: All problems which compiler reports as unknown problem are the real compiler BUGs/Problems. Eventually MXML compiler/ActionScript compiler should be able to take C++ or FORTRAN code or an aribitrary text and nicely tell "Error: It is not ActionScript (Flex) code" or "the code is corrupted from Line so and so...". When compiler crashed, it is most probably due to one of the states not handled (or not handled correct). Keeping this in mind I assume, that my code has nothing to do with the compiler crash.
2. PROBLEM Description.
     - I tried to port our internal project from Flex3.5/Flex Builder 3 to Flex4.1/Flash Builder 4.
     - After checking out and trying to build code I start getting weird problems like Error 1037: Packages cannot be nested.
     - After cleaning and compiling project by project, walking up dependency tree, I was able to get rid of this problem.
     - On last Project I've got another problem (An internal build error has occurred... Unknown Flex Problem). Which I stuck with for a while.
     - When I checked log file I found following messages:
============================================================
!ENTRY com.adobe.flexbuilder.project 4 43 2010-12-21 15:45:24.353
!MESSAGE Uncaught exception in compiler
!STACK 0
java.lang.ClassCastException: macromedia.asc.parser.InputBuffer cannot be cast to flex2.compiler.as3.CodeFragmentsInputBuffer
at flex2.compiler.as3.AbstractSyntaxTreeUtil.lineNumberToPosition(AbstractSyntaxTreeUtil.jav a:1266)
at flex2.compiler.mxml.ImplementationGenerator.generateBinding(ImplementationGenerator.java: 569)
at flex2.compiler.mxml.ImplementationGenerator.generateBindingsSetupFunction(ImplementationG enerator.java:863)
at flex2.compiler.mxml.ImplementationGenerator.generateBindingsSetup(ImplementationGenerator .java:812)
at flex2.compiler.mxml.ImplementationGenerator.generateInitializerSupportDefs(Implementation Generator.java:1878)
at flex2.compiler.mxml.ImplementationGenerator.generateClassDefinition(ImplementationGenerat or.java:1044)
at flex2.compiler.mxml.ImplementationGenerator.<init>(ImplementationGenerator.java:206)
at flex2.compiler.mxml.ImplementationCompiler.generateImplementationAST(ImplementationCompil er.java:499)
at flex2.compiler.mxml.ImplementationCompiler.parse1(ImplementationCompiler.java:197)
at flex2.compiler.mxml.MxmlCompiler.parse1(MxmlCompiler.java:168)
at flex2.compiler.CompilerAPI.parse1(CompilerAPI.java:2871)
at flex2.compiler.CompilerAPI.parse1(CompilerAPI.java:2824)
at flex2.compiler.CompilerAPI.batch2(CompilerAPI.java:446)
at flex2.compiler.CompilerAPI.batch(CompilerAPI.java:1274)
at flex2.compiler.CompilerAPI.compile(CompilerAPI.java:1496)
at flex2.tools.oem.Application.compile(Application.java:1188)
at flex2.tools.oem.Application.recompile(Application.java:1133)
at flex2.tools.oem.Application.compile(Application.java:819)
at flex2.tools.flexbuilder.BuilderApplication.compile(BuilderApplication.java:344)
at com.adobe.flexbuilder.multisdk.compiler.internal.ASApplicationBuilder$MyBuilder.mybuild(A SApplicationBuilder.java:276)
at com.adobe.flexbuilder.multisdk.compiler.internal.ASApplicationBuilder.build(ASApplication Builder.java:127)
at com.adobe.flexbuilder.multisdk.compiler.internal.ASBuilder.build(ASBuilder.java:190)
at com.adobe.flexbuilder.multisdk.compiler.internal.ASItemBuilder.build(ASItemBuilder.java:7 4)
at com.adobe.flexbuilder.project.compiler.internal.FlexProjectBuilder.buildItem(FlexProjectB uilder.java:480)
at com.adobe.flexbuilder.project.compiler.internal.FlexProjectBuilder.build(FlexProjectBuild er.java:306)
at com.adobe.flexbuilder.project.compiler.internal.FlexIncrementalBuilder.build(FlexIncremen talBuilder.java:157)
at org.eclipse.core.internal.events.BuildManager$2.run(BuildManager.java:633)
at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:170)
at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:201)
at org.eclipse.core.internal.events.BuildManager$1.run(BuildManager.java:253)
at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:256)
at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:218)
at org.eclipse.core.internal.events.BuildManager.build(BuildManager.java:360)
at org.eclipse.core.internal.resources.Project.internalBuild(Project.java:516)
at org.eclipse.core.internal.resources.Project.build(Project.java:94)
at org.eclipse.ui.actions.BuildAction.invokeOperation(BuildAction.java:221)
at org.eclipse.ui.actions.WorkspaceAction.execute(WorkspaceAction.java:162)
at org.eclipse.ui.actions.WorkspaceAction$2.runInWorkspace(WorkspaceAction.java:483)
at org.eclipse.core.internal.resources.InternalWorkspaceJob.run(InternalWorkspaceJob.java:38 )
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
!SESSION 2010-12-22 09:48:27.766 -----------------------------------------------
eclipse.buildId=M20100909-0800
java.version=1.6.0_16
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US
Framework arguments: -product org.eclipse.epp.package.jee.product
Command-line arguments: -data C:\Client_Flex4 -os win32 -ws win32 -arch x86 -product org.eclipse.epp.package.jee.product
================================================
3. RESOLUTION/WORK AROUND
     - I was able to get this problem cleared by putting compiler option for Flex Application projects: -keep-generated-actionscript
4. SIDE NOTE
I do not really see putting this compiler option as the solution and living with the mistery is making me fill a bit bad.

Hi Faser,
I just tried it on Vista with our latest FB Plugin build but
I was unable to reproduce your issue with the following setup:
- FB Plugin build installed by Administrator account user
under her Documents folder
- Administrator account user can launch, create Flex projects
under her own workspace without any problems
- Standard account user can launch the FB Plugin build (need
Admin's password) and create Flex project (default location) under
his own workspace
If your setup is different, can you please log a bug at
http://bugs.adobe.com/flex.
Be sure to include what build you are using, whether it's
reproducible, the detail of the setup, etc...
thanks,
Sharon

Excel Web Access(An error has occurred.Please contact your system administrator if this problem persists. )

I'm using share point 2007 under windows server 2008 R2(one web server, another db server).When I publish a excel(*.xlsx) to report library or view it in web browser with the same error as bellows:
Excel Web Access
An error has occurred.
Please contact your system administrator if this problem persists.
Please kindly support to guide how to fix it with bellow information in details such as log.Many thanks!
1. The 12/logs file is as bellows:
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Calculation Services    2u7d Medium ExcelServerSharedWebApplication.Local: An exception was thrown by configdb infrastructure: System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could
not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context.     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local().
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Services Administration 8tqh Critical Excel Services: Unexpected exception while trying to access Shared Services Database;. Error = ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that
either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context..
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Web Access              6nfi Unexpected InternalEwr.OpenWorkbook - An unexpected exception in the ECS Proxy occurred. Message: Microsoft.Office.Excel.Server.ExcelServerSettingException:
An error has occurred. ---> System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running
outside of a web context.     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local()     --- End of inner exception stack trace ---     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local()
at Microsoft.Office.Excel.Server.ExcelServerSettings.get_Settings()     at Microsoft.Office.Excel.Server.ExcelServerSettings.get_EcsList()     at Microsoft.Office...
2.the event in event viewer is:
Log Name:      Security
Source:        Microsoft-Windows-Security-Auditing
Date:          2014/10/10 9:49:43
Event ID:      4625
Task Category: Logon
Level:         Information
Keywords:      Audit Failure
User:          N/A
Computer:      ***.net
Description:
An account failed to log on.
Subject:
Security ID:  NULL SID
Account Name:  -
Account Domain:  -
Logon ID:  0x0
Logon Type:   3
Account For Which Logon Failed:
Security ID:  NULL SID
Account Name:  ***
Account Domain:  ***
Failure Information:
Failure Reason:  An Error occured during Logon.
Status:   0xc000006d
Sub Status:  0x0
Process Information:
Caller Process ID: 0x0
Caller Process Name: -
Network Information:
Workstation Name: ***
Source Network Address: ***
Source Port:  63664
Detailed Authentication Information:
Logon Process:
Authentication Package: NTLM
Transited Services: -
Package Name (NTLM only): -
Key Length:  0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
Event Xml:
<Event xmlns="">
<System>
    <Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
    <EventID>4625</EventID>
    <Version>0</Version>
    <Level>0</Level>
    <Task>12544</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8010000000000000</Keywords>
    <TimeCreated SystemTime="2014-10-10T01:49:43.563436300Z" />
    <EventRecordID>37602685</EventRecordID>
    <Correlation />
    <Execution ProcessID="532" ThreadID="26096" />
    <Channel>Security</Channel>
    <Computer>***.net</Computer>
    <Security />
</System>
<EventData>
    <Data Name="SubjectUserSid">S-1-0-0</Data>
    <Data Name="SubjectUserName">-</Data>
    <Data Name="SubjectDomainName">-</Data>
    <Data Name="SubjectLogonId">0x0</Data>
    <Data Name="TargetUserSid">S-1-0-0</Data>
    <Data Name="TargetUserName">***</Data>
    <Data Name="TargetDomainName">***</Data>
    <Data Name="Status">0xc000006d</Data>
    <Data Name="FailureReason">%%2304</Data>
    <Data Name="SubStatus">0x0</Data>
    <Data Name="LogonType">3</Data>
    <Data Name="LogonProcessName">
    </Data>
    <Data Name="AuthenticationPackageName">NTLM</Data>
    <Data Name="WorkstationName">***</Data>
    <Data Name="TransmittedServices">-</Data>
    <Data Name="LmPackageName">-</Data>
    <Data Name="KeyLength">0</Data>
    <Data Name="ProcessId">0x0</Data>
    <Data Name="ProcessName">-</Data>
    <Data Name="IpAddress">***</Data>
    <Data Name="IpPort">63664</Data>
</EventData>
</Event>

Hi Tracy,
Have you changed something on your SharePoint 2007 environment recently before this issue occurred?
This issue may be related to Alternate Access Mappings settings like the following similar post, if you have configured AAM, you can check if this issue happened to some URLs, if it's the case, please add the problematic URLs as a Publish URLs for the default
zone for your web application, and also add these URLs as trusted locations, then check results again.
If above doesn't work, please enable ULS log on verbose level to get more useful log errors which time are corresponding to the errors occur.
https://social.technet.microsoft.com/Forums/en-US/c9ab4818-65c9-444d-be50-1bfed1f1509b/excel-web-access-web-part-works-on-intranet-but-not-internet?forum=sharepointgenerallegacy
http://blog.bugrapostaci.com/2011/09/08/how-to-enable-verbose-log-mode-on-moss-2007/
Thanks
Daniel Yang
TechNet Community Support

A critical error has occured. Processing of the service had to be terminate

When manager wants to approve the employee leave request its giving following error.
Critical Error
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
Critical Error
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
Access via NULL object reference not possible., error key: RFC_ERROR_SYSTEM_FAILURE
Access via NULL object reference not possible., error key: RFC_ERROR_SYSTEM_FAILURE:com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Access via NULL object reference not possible., error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
     at com.sap.xss.hr.lea.form.FcForm.getCustomizing(FcForm.java:1020)
     at com.sap.xss.hr.lea.form.FcForm.onInit(FcForm.java:417)
     at com.sap.xss.hr.lea.form.wdp.InternalFcForm.onInit(InternalFcForm.java:2053)
     at com.sap.xss.hr.lea.form.FcFormInterface.onInit(FcFormInterface.java:184)
     at com.sap.xss.hr.lea.form.wdp.InternalFcFormInterface.onInit(InternalFcFormInterface.java:1911)
     at com.sap.xss.hr.lea.form.wdp.InternalFcFormInterface$External.onInit(InternalFcFormInterface.java:2007)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:922)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:891)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1084)
     at com.sap.xss.hr.lea.worklist.VcWorkList.onInit(VcWorkList.java:267)
     at com.sap.xss.hr.lea.worklist.wdp.InternalVcWorkList.onInit(InternalVcWorkList.java:363)
     at com.sap.xss.hr.lea.worklist.VcWorkListInterface.onInit(VcWorkListInterface.java:164)
     at com.sap.xss.hr.lea.worklist.wdp.InternalVcWorkListInterface.onInit(InternalVcWorkListInterface.java:144)
     at com.sap.xss.hr.lea.worklist.wdp.InternalVcWorkListInterface$External.onInit(InternalVcWorkListInterface.java:220)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:291)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:219)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: com.sap.aii.proxy.framework.core.BaseProxyException: Access via 'NULL' object reference not possible., error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
     at com.sap.xss.hr.lea.model.LeaveRequestAdaptiveModel.pt_Arq_Customizing_Get(LeaveRequestAdaptiveModel.java:392)
     at com.sap.xss.hr.lea.model.Pt_Arq_Customizing_Get_Input.doExecute(Pt_Arq_Customizing_Get_Input.java:137)
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
     ... 47 more
   kindly help ASAP,

Hi,
Did you give enough authorizations to the user at the beack end.
Just Try giving SAP_ALL authorizations and check.
Regards,
Santhosh

Error Message: Sorry, a serious error has occurred that...

This seems to be a common problem, however, I have not found a fix. I am somewhat technologically savvy, but limited! Listed below are my specs and details to the problem.
Software- Premiere Pro (Version 5.03) Recently updated
OS- WIN7 Core 2 Duo CPU E8400 3.00GHz 4.00GB RAM
Footage used- all types
Error message text-
Sorry, a serious error has occurred that requires, Adobe Premiere Pro to shut down. We will attempt to save your project.
The problem-
When attempting to start PP it allows me to start a new project, select setting, and sequences. However, as the program begins to start up the new project the error pops up. The only option is to click ok, which in turn locks up the program.
Also any files that I have previous created also will not open properly.
Also, I have recently lost a drive that contained many of my old PP projects. I've read that some people have this problem when losing a drive that once related to possible PP preferences and scratch disks...once again I am limited on understanding how that all works.
I have restarted, cold boots, warm boots....clean uninstall, clean reinstall of PP and all components, updated chipset, display adaptor is up-to-date (NVIDIA GeForce 9300 GE) ...also I am an administrator of the workstation
**Through my many failed attempts from reading forums I have also at sometimes received a RunTime Error R6025 (pure virtual function call)
I have no 3rd party effects
not using Mecury to my knowledge.?

Has it worked OK in the past? If so, try System Restore.
While your computer might meet Adobe's minimum requirements, it is way underpowered to run Premiere Pro properly.
See here:
http://forums.adobe.com/message/6336879#6336879

Error Message: Sorry, a serious error has occurred that requires Adobe Premier Pro to shut down.

Hi. I'm having another serious problem with CS4 (the version that comes with CS5 when you don't have 64 bit capability. I just finished a project, had saved it, and then had switched over to Adobe Encoder to create a finished flash video (which worked perfectly). I shut down CS4, went home, tried to restart the main project to create a video from the same project (wanted to make an mpeg version as well) and got the following error message:
Sorry, a serious error has occurred that requires Adobe Premier Pro to shut down. We will attempt to save your current project. Then the system shuts down.
Not only can I not open the project I was working on, I cannot open any of my prior projects without receiving the same error.
Does anyone have any idea what may be causing this issue and how to resolve it?
Thanks in advance for any suggestions.
By the way, is everyone else having the same amount of problems with this software? I've never had any software that has had so many problems from the beginning. My opinion of this software and Adobe in general has gone down substantially.

Not enough information for anyone to even make a guess
Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link

An error has occurred:Invalid postback or callback argument in InfoView

Hi Friends,
When i try to change the parameter values and click OK button while scheduling a report in InfoView, i am getting the following error:
An error has occurred:Invalid postback or callback argument. Event validation is enabled using in configuration or in a page. For security purposes, this feature verifies that arguments to postback or callback events originate from the server control that originally rendered them. If the data is valid and expected, use the ClientScriptManager. RegisterForEventValidation method in order to register the postback or callback data for validation.
Till now i have not find any good solution for this. Please help in providing any better solutions to fix this.
Edited by: Shivananda Puli on Aug 6, 2010 11:55 AM
Edited by: Shivananda Puli on Aug 6, 2010 11:55 AM

This forum is for questions in regards to using the SDK within a custom application, since you are using Infoview, please post this in the applicable forum under the [Business Objects|/community [original link is broken]; section

A communication error has occurred while invoking commands in SharePoint host process

Hi All,
I am using Virtual box to connect to Sharepoint 2013 VPC. Due to an unexpected sutdown of my machine the VPC got some issue. Now I restored it using my bak up file. But after this when I deploy my sharepoint 2013 farm solution Iam getting the following error.
Error occurred in deployment step 'Recycle IIS Application Pool': A communication error has occurred while invoking commands in SharePoint host process: The server did not provide a meaningful reply; this might be caused by a contract mismatch, a premature
session shutdown or an internal server error.
What could be the issue? Any suggestions ?
Thanks in advance...
Regards
Nimisha
[email protected]

Hi Nimisha,
Seems that the original issue of communication error has been solved, for this new issue, it is recommended that you open a new thread which can make others easier
to focus on one issue in one single thread.
Best regards,
Patrick
Patrick Liang
TechNet Community Support

I keep getting the message "An unknown error has occurred" when trying to sign in to the App Store. Why?

I keep getting the message "An unknown error has occurred" when trying to sign in to the App Store. How do I solve this problem?

Make sure you have the correct country selected. Click the round flag icon bottom right side of the App Store window.

HT201303 An unknown error has occurred when trying to sign in , and I know I putting in the correct info, this stinks can anyone help? Because apple isn't...

An unknown error has occurred when trying to sign in , and I know I putting in the correct info, this stinks can anyone help? Because apple isn't...

urgh... just noticed my previous post said i have mountain lion... i meant that i have snow leopard. no idea why i messed that up!
anyway, i just tried reinstalling snow leopard from the usb key that came with the computer. Then, I installed software updates until it told me there were no more updates. After that, I tried the app store again, and it still is giving me the unknown error. really irked by that. may have to take it back to the apple store yet again, to see if i can figure out why the app store won't work.

Photoshop CC 2014 - The file can not be saved in path because an error has occurred

Hello,
I need again help regarding this issue. Sometimes but very often I receive an error, trying to save a PSD file, the error is: "The file can not be saved in <path> because an error has occurred". After that it is not possible to save the file in any format, using save or save in dialog. The only way to rescue the result is, to save for web as an jpeg. This error occours often using Topaz or NIK filter and until now only in PS-CC 2014. My workflow looks like this:
- Open NEF RAW file in Brdige
- Settings in ACR and give it into PS by clicking OK in ACR
- In PS doing a adjust some levels
- press SHIFT+STRG+ALT+E for a new summary layer
- Uing Topaz Adjust on the new level with 65% opacity
- press SHIFT+STRG+ALT+E for a new summary layer
- Using Topaz DeNoise on the new layer
- pres STRG+i and resize the image to 1200x797
- Using Topaz InFocus on the same layer as DeNoise
- create a vignette with brightness adjustlayer
After this workflow in nearly 90% it is not possible to save the file as PSD or something else, only to save for web as JPG. If I save the file after opening the RAW in PS and after every layer with Topaz Filter, I can save the file when I am done. Same issue occurs using NIK Filters in that way.
I tried to optimize the performance by using this guide: http://helpx.adobe.com/photoshop/kb/optimize-performance-photoshop-cs4-cs5.html doesn’t solve the issue.
I re- and installed all Adobe Products more than three times, doesn't solve the issu.
After that I ordered a new SSD drive and insall Windows 7 64bit inkl. All latest hotfixes, patches and drivers. I downloaded the newest Adobe Versions and the newest filter sets from Topaz and NIK. Doesn’t solve the issue.
This is my rig:
Gigabyte Z87X-UD4H mainboard
Intel Core i7 4770k
32GB Corsair RAM
250GB Samsung 840 Evo SSD Drive
nVidia Geforce GTX770
During my tests I took the same RAW File and created nearly 20 adjustment layers and summary layers, without using Topaz or NIK filters. No problem, I was able to save the file as PSD file.
From my point of view, actually, the error occurs only when I am using Topaz or NIK filters. Both supports doesn’t know the issue and if I search the web, I can’t find more then me. It seemed to depend on my settings, my rig or something else, perhaps a cache is overflowed or something like this. Adobe telephone support can’t help because I said I use a third party filter. But it occurs with two different manufactures…
So please guys, help me to figure out why this error occurs in my system.
Thanks in Advance and best regards,
Michael

Update: I tried several times to reproduce the error, actually it dosen't occur. I changed nothing on my system, without reboot it twice. This is what I said in my beginning times: it occurs sometimes but often. I will keep you up to date.

An actionscript error has occurred

Similar Messages

Maybe you are looking for