An active RFC Connection couldnot be found

Hi friends,
I am doing broadcasting for one work book...
i have done settings and all correct i gues.
But when i executed report its saying"An active RFC Connection could not be found".
I am able to send normal messages via Business workplace .
When i have sent query results its saying successfully mail sent at SOST but i am not geting mail.
I did test for prec server but the report is under waiting state for long time till now...
job is under released status only...
Can you please suggest what can be done to achieve this...???
please help...
Regards,
Aanand....

Any one knows about this please respond..
regards,
aanand

Similar Messages

No RFC connection could be found in SLG1.

Hi Experts,
I'm Trying to send the contracts (GOA) from SRM to R/3. I create the RFC port and the Idoc as sourcing configuration guide ( WE21, WE42, WE20) but doestn work. When the contract was realeased it show up the message error in SLG1.
The message error is ''No RFC connection could be found''.
The RFC was create too..with this RFC I make all replications by middleware. Is there other point to activate for this?
thanks,
Gustavo

Hi Paulo,
The message types was defined as configuration guide for only inbound in R/3. In the configuration guide I found only informations about receive the idocs in R/3 (inbound). For inbound messages in R/3 system I defined BLAORD and COND_A, I tru to define teh same message types in outbound parametes in SRM,but the messages BLAORD e COND_A doesnt exists in SRM. Is there any documentation to make this?
I was see the note too 641919
Thanks,
Gustavo
Bom dia, Paulo!
Tudo bem?
Foi definido os tipos de mensagem de entrada BLAORD e COND_A no R/3 no tipo de parceiro do SRM. No configuration guide não faz menção na definição das mensagens de saida (outbound) no SRM, encontrei somente a configuração enviando o contrato do R/3 para o SRM. O que eu preciso e enviar do SRM para o R/3. Tentei definir os mesmo parametros de entrada no R/3 na saida no SRM, porem o tipo de mensagem BLAORD e COND_A não existe. Se você tiver alguma documentação sobre isso eu agradeço.
Obrigado,
Gustavo

Error: RFC connection host not found

Dear all,
I have configured the SLD and JCO destinations also. But when i test connection system throws the error.
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=thr3dev1 GROUP=PUBLIC R3NAME=DEV MSSERV=sapmsDEV PCS=1 ERROR service 'sapmsDEV' unknown TIME Tue Oct 11 19:03:14 2005 RELEASE 640 COMPONENT NI (network interface) VERSION 37 RC -3 MODULE ninti.c LINE 494 DETAIL NiPGetServByName2: service 'sapmsDEV' not found SYSTEM CALL getservbyname_r COUNTER 1
Pls suggest something. Can anybody provide the step check list.
Regds,
Anup

Anup,
the entry sapmsDEV is missing in your "services"-file on the computer that hosts your SLD-Server/J2EE WAS. Windows locates it at %WINDIR%/system32/drivers/etc, unix usually at /etc/.
make an entry like that:
sapmsDEV 3600/tcp (in case, your Systemnumber is 00, otherwise replace the "00" with your actual systemnumber)
kind rtegards, achim

RFC Connection remains open after portal logoff

Hi,
We have configured Universal Worklist in our EP7 EHP1 SPS4 Portal.
When a user connects to the Portal and launches the UWL it creates an RFC connection to the backend ECC. However, when the user moves away from UWL iview or logs out or closes the browser the RFC connection in the backend still
remains and is released only after the timeout value reached as set in ECC.
Are there any settings on the portal or ECC to release the session immediately once user moves away from UWL or logs out of portal ?
Thanks,
Savy.

Hi my friend
It costs time and resources to establish an RFC connection, therefore it is not immediately deleted but maintained by the system to be reused. But in case there're special purpose to control RFCs, here're 2 parameters to do so:
The parameter gw/gw_disconnect is a timeout in seconds to close the TCP connection between two SAP gateways if there is no RFC connetion on it for the given timeout. But if there is an active RFC connection onit it will not be closed even if there is no traffic on that RFC connection. Thats why you need another parameter.
The parameter gw/keepalive is used to periodically check all active RFC (and other) gateway connections if there was no traffic on them for the given time.
Regards,

Broadcasting Workbook Error | An active RFC server could not be found

Hi All,
I am facing an issue while trying to broadcast(distribute) a workbook. The broadcasting of a query from the query designer works fine. But when I try to distribute a workbook, it throws up the following error. We have used the SMTP method(Using SMTP plug-in) for broadcasting and we know that we can use RFC(Using RFC connection) too. But my question is whether RFC method is a must for workbook distribution.Kindly help me.
Thanking you,
Best Regards,
Manesh
The Error Log
Processing for user PUSHM, language EN
Processing setting
An active RFC server could not be found
Error occurred during processing of framework class CL_RSRD_PRODUCER_EXCEL, type PROD
Processing setting !TEMP_2CC00BE0E24C704991039F6E9C2AC4E4 completed with errors
Job step for user PUSHM, language EN ended with errors


Hi,
Are you using BI 7 ?
Have you configured a Precalculation server in transaction RSPRECADMIN ?
Precalculation servers are basically PC, that are used for their Excel capabilities, in order to produce up-to-date workbooks.
Best regards,
Guillaume
Message was edited by:
Guillaume GARCIA

Error in Broadcaster - An Active RFC Server could not be found

Hi all,
I am trying to broadcast a workbook to my mailbox through Information Broadcasting, i am trying this in BI 7.0 system. In the Broadcasting wizard, I gave my mailid & the other required credentials. But when i click on Schedule, i am getting a Error message "An Active RFC Server could not be found. Error occured during processing of framework class CL_RSRD_PRODUCER_EXCEL, type PROD".
I checked in SU01 & my mailid is already added there. So, where am i missing or is there any settings need to be done for the Broadcaster to work?
Thanks,
Murali

The precalc server is not needed if you are generating html output, but certainly is mandatory for the Broiacaster to run/distribute BEx Excel Workbooks.
The BW needs access to a Windows computer that has Excel on it. The BW connects to the Precacl and sends it a request it run a BEx wkbk, which the BW then can email to users.
The precalc server is a Windows Service. You can install it locally on your desktop, or it can be installed on a windows server. There is a little config that needs to be done. The How To Troubleshoot Information Broadcasting link in the other resposne will provide all the steps. You should obtain the most current version of the software from SAP.
You'll need a precalc server for each BW system in your landscape that you want to broadcast BEx wkbks from, so if you have Dev and QA systems, you'll need precalcs for them as well.

DB connect no data found is rfc connection required

Hi Gurus,
I want to retrieve data from oracle database, i have all the table with data in it, but through the source system i.e db connect it does not display any contents of the table, it says no data found, the installation was all done perfecttly fine, i can read the table fields but i am not able to read the data from the table. what could be the problem.
Is an RFC connection required for this db connect to retrieve the data from oracle. or else what is the issue. Can anyone please help me out on this, I already posted long back on this still no reply on it. From the osss notes it allgives information about the intallation but it there is no data found then it does not give any information onthis. Can anyone please help me out on this.
Thanks,
Hem

Hi Hem,
You want to retrieve data from Oracle Database using BW and you are having a problem?
Try isolation technique to solve your problem.
Try to use third party softwares e.g. MS Excel. Retrieve data from Oracle using MSExcel. If MSExcel can retrieve data then you can conclude:
a.) The network connection to Oracle is fine.
b.) Oracle is up and running and is able to serve data from your specified table.
RFC Connection is not required. RFC is only useful for SAP to SAP communication. This connection uses a different technique and uses a different driver to communicate. SAP provided DB Connect Engine. A similar approach as what Microsoft's OLEDB is doing. This to make a transparent connection between various database systems. (whether MSSQL, Oracle, MSACCESS, SYBASE etc.)
As part of isolation technique, are you sure you are accessing the correct table? Try to access other tables. If you can access data of different tables then something is wrong with the table you want to access.
Have you check authorization issues? Are you allowed to extract data?
Hope I have helped. If I did, please grant points...
--Jkyle

Active rfc server not found

Hi All.
I am trying to distribute a workbooks by email using bi 7.0.But when I do it , it is giving me an error "An active rfc server not found'.We have a precalculation server setup and it is active.Please let me know how can I resolve it.
Your answers would be greatly appreciated.
Regards
Abyie

In RSPRECADMIN does the precalc server show green?
If you press the 'info' button for the server there (in the popup) it should show you the log giving you more info about the error.
You can do a test for precalc in RSPRECADMIN, does that work?
There are a few OSS notes on this talking about
- setting the authorization for the precalc service on windows
- mentioning ip address of the BI server in the hosts file in the PC running precalc
I assume your error is in precalc not in sending the mail.

Java communication error: Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679 Transaction program not registered ).

There is a RFC connection not working connection test fails.
I found out the RFC is using a a program id that is not registerd.
When I register the program on os level like rfcexec -r -a <program_id> -g <hostname> -x <sapgw> the connection test on the rfc works.
The problem with the rfcexec is that it just works as long as the os session is active.
From what I´ve read I need to configure this on java side in the web dynpro content administrator.
Can you help me with that ? When I try to click Create jco destination I get an error.

Hello Vioar,
rfcexec is only a standard program for testing, you sould not register it for your application on the gateway.
Since you are getting "User is not allowed to read any data..." - did you logon with the correct user? Does this user have enough authorizations?
Regards,
Alwina

Regading RFC Connection

Hi all,
i had a problem with RFC Connecton,when am trying to activate the T90CLNT090 datasource in BI,which is not active state to replicate the datasource it says my RFC connection was wrong.i tried to activate it.i donno how to check thaose connections in SM59 T-code.please help me out in activating this datasource.am using IDES BI7 and ECC 4.7 R/3.i want to connce these two in my system.
thanks n regards,
satya

Hello,
From RSA1 goto source system. Here select your source system and right click on it and select check source system.
It will show up the errors it has with the system. Get in touch with ur BASIS guys if any errors found.
Regards,
Shashank

RFC Connection error between R/3 4.7 & ECC 6.0

Hi all,
I m receiving the following error when i test the RFC connection between the mentioned systems..
/ CPIC-CALL: 'ThSAPCMINIT' : cmRc=20 thRc=665#Unknown service
DEV_W0 file contains the following information:
M *****************************************************************************
M *
M * LOCATION    SAP-Gateway on host IGATESAP06 / sapgw00
M * ERROR       service 'sapgw01' unknown
M *
M * TIME        Wed Apr 22 03:59:51 2009
M * RELEASE     640
M * COMPONENT   NI (network interface)
M * VERSION     37
M * RC          -3
M * MODULE      ninti.c
M * LINE        463
M * DETAIL      NiPGetServByName: service 'sapgw01' not found
M * SYSTEM CALL getservbyname
M * COUNTER     2704
M *
M *****************************************************************************
M
A RFC 2272 CONVID 90657609
A   * CMRC=20 DATA=0 STATUS=0 SAPRC=665 ThSAPCMINIT
A RFC> ABAP Programm: RSRFCPIN (Transaction: SM59)
A RFC> User: 704817 (Client: 800)
A RFC> Destination: ISMCLNT500 (handle: 2, , {8E460E4B-7D68-4FAE-A9BD-E212DAFA6A8E})
A RFC> Called function module: RFC_PING
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
Could any one pls. help me..
Thanks & Regards, Subbu

Hi all,
Thanks for ur replies.. I have added as u mentioned but i m receiving the below error??? Could u pls. suggest??
M *
M * LOCATION    SAP-Gateway on host IGATESAP06 / sapgw00
M * ERROR       service '?' unknown
M *
M * TIME        Wed Apr 22 04:58:46 2009
M * RELEASE     640
M * COMPONENT   NI (network interface)
M * VERSION     37
M * RC          -3
M * COUNTER     2733
M *
M *****************************************************************************
M
A RFC 2272 CONVID 94231859
A   * CMRC=20 DATA=0 STATUS=0 SAPRC=665 ThSAPCMINIT
A RFC> ABAP Programm: RSRFCPIN (Transaction: SM59)
A RFC> User: 704817 (Client: 800)
A RFC> Destination: ISMCLNT500 (handle: 2, , {34E2D1F9-B021-4B04-BD35-16E04AF4BD11})
A RFC> Called function module: RFC_PING
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
thanks,
Subbu

RFC Connection Error (for end-to-end Monitoring)

Hi,
I am configure End-to-End monitoring in XI 3.0 SP20, PMI does't show data in end-to-end monitoring... anyway!!! I check RFC connection PMI
RFC destination name: PMIXQA90020080827
in TEST connection I am getting an error: "Group PUBLIC not Found" where may I define that PUBLIC to solve this problem please let me know.... thanks
and what is Group PUBLIC in RFC ??? what does it do???
Is there any notes I can read for related issue, please help me out this
Thanks a lot in advanced
Edited by: issue2008 issue on Aug 28, 2008 10:03 AM

Thanks for reply... SURE I can tell you
Connection Type: 3 R/3 connection
ScreenShot shows blow:
http://www.flickr.com/photos/25222280@N03/2806290586/sizes/o/
Thanks
Edited by: issue2008 issue on Aug 28, 2008 10:20 AM

Source system error - RFC connection failed

Hi Gurus,
I have installed ECC6 on my PC but not when i am trying to created the DS its not allowing me its saying appl comp hierarchy for source susyem "T90*" doesnt not exist.
so tried going to source system -> done a check for my source system then i got the following errors
Source system "T90*" is inactive
Entry in outbound table not found
Entry in inbound table not found
Basic type does not exist
Check failed for RFC connection T90CLNT090 ; check destination
can any one tell me how to fix this issue?
Regards,
Ravi

Hi Ravi,
Did you run appication component hierarchy in source system(TX-RSA9)
then activate your data source
then replicate in BW system.
Check here for BW connectivity with source system.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bi/stepbyStepBusinessIntelligence
Thanks,
Vijay.

Service Desk for VAR - RFC Connections to customers

Hi all,
I'm trying to implement Service Desk for a VAR provider, however, I didn't found until now how to connect customer systems to Solution Manager in the VAR provider site.
I was able to create systems in SMSY automatically, as the Business partners and OSS users, but in SMSY the system has no Client (000,100,800) assigned and could not get it as no read RFC for system is maintained. Should this RFC be created using SAPSERV connection via marketplace (automatically or not) or using a simple direct SAPRouter connection to customer? anyone know how can I proceed or know some online documentation available?
Manually maintain this connections could be very anoing as we have a lot of customers and systems.
Thanks in advance for you help.
Best Regards
Pedro Rodrigues

Hi Pedro,
normaly you don't need those RFCs as a VAR, that's right. With the new note 1320545 you also get product versions updated from OSS into SMSY. However if you require all patch levels of your customers in SMSY to do MOPZ you need RFC or SLD connection. You can generate RFCs connections from the SMSY system client screen for ABAP instances. There is a button "Router information" where you can maintain your and your customer's SAProuter IP adresses. These will be included in the routstrings of the generated destinations. Of course this must be done manually for each customer system because SAP suport Portal doesn't know your customers passwords and routers.
Regards
Andreas

Unable to open RFC connection - Err message

I all
I am trying to install SAP ERP 2004 SR1 on Microsoft Windows Server 2003, SQL Server 2000. I have successfully installed the Central Instance but when I try to install the Database instance after the database loading the following error is given:
FRF00007 - Unable to open RFC connection.
I have also tried to start the sap system. The message_server and igswd processed run ok, but the disp+work process is stopped.
I am also sending you the developer trace for this process.
Thank you a lot
Vasil
trc file: "dev_disp", trc level: 1, release: "640"
Mon Jul 27 11:24:48 2009
kernel runs with dp version 128000(ext=102000) (@(#) DPLIB-INT-VERSION-128000-UC)
length of sys_adm_ext is 524 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 43
intno 20020600
make: multithreaded, Unicode
pid 2668
***LOG Q00=> DpSapEnvInit, DPStart (01 2668) [dpxxdisp.c 1100]
 shared lib "dw_xml.dll" version 43 successfully loaded
 shared lib "dw_xtc.dll" version 43 successfully loaded
 shared lib "dw_stl.dll" version 43 successfully loaded
 shared lib "dw_gui.dll" version 43 successfully loaded
Mon Jul 27 11:24:53 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 10528 (1316)
DpShMCreate: sizeof(tm_adm) 2780232 (13832)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpShMCreate: sizeof(comm_adm) 290000 (580)
DpShMCreate: sizeof(vmc_adm) 0 (372)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: SHM_DP_ADM_KEY (addr: 058C0040, size: 3192688)
DpShMCreate: allocated sys_adm at 058C0040
DpShMCreate: allocated wp_adm at 058C1B58
DpShMCreate: allocated tm_adm_list at 058C4478
DpShMCreate: allocated tm_adm at 058C44A0
DpShMCreate: allocated wp_ca_adm at 05B6B0E8
DpShMCreate: allocated appc_ca_adm at 05B70EA8
DpShMCreate: allocated comm_adm_list at 05B72DE8
DpShMCreate: allocated comm_adm at 05B72E00
DpShMCreate: allocated vmc_adm_list at 05BB9AD0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05BB9AF8
DpShMCreate: allocated wall_adm at 05BB9B00
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 1131 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.6.1 2.6 4.0) [dpxxdisp.c 1462]
***LOG Q0K=> DpMsAttach, mscon ( upayweb1) [dpxxdisp.c 9736]
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Mon Jul 27 11:24:54 2009
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 43
Release check o.K.
Mon Jul 27 11:25:33 2009
ERROR => W0 (pid 3740) died [dpxxdisp.c 12187]
ERROR => W1 (pid 3748) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 3756) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 3764) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 3772) died [dpxxdisp.c 12187]
ERROR => W5 (pid 3780) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 3792) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 3800) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-3740 (SIGUSR2)
ERROR => DpWpKill(3740, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-3748 (SIGUSR2)
ERROR => DpWpKill(3748, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-3756 (SIGUSR2)
ERROR => DpWpKill(3756, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-3764 (SIGUSR2)
ERROR => DpWpKill(3764, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-3772 (SIGUSR2)
ERROR => DpWpKill(3772, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-3780 (SIGUSR2)
ERROR => DpWpKill(3780, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-3792 (SIGUSR2)
ERROR => DpWpKill(3792, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-3800 (SIGUSR2)
ERROR => DpWpKill(3800, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 27 11:25:43 2009
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Mon Jul 27 09:25:43 2009
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3740 Ended no 1 0 0
1 DIA 3748 Ended no 1 0 0
2 UPD 3756 Ended no 1 0 0
3 ENQ 3764 Ended no 1 0 0
4 BTC 3772 Ended no 1 0 0
5 BTC 3780 Ended no 1 0 0
6 SPO 3792 Ended no 1 0 0
7 UP2 3800 Ended no 1 0 0
Dispatcher Queue Statistics Mon Jul 27 09:25:43 2009
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 8 ( 88%), shm 1 ( 11%)
since last update total 9, udp 8 ( 88%), shm 1 ( 11%)
Dump of tm_adm structure: Mon Jul 27 09:25:43 2009
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Jul 27 09:25:43 2009
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 27 11:25:48 2009
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (3724) (SOFT_KILL)
Stop icman
killing process (3732) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:3724 HANDLE:1592)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 27 11:25:49 2009
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3724 HANDLE:1592)
[DpProcDied] Process died (PID:3732 HANDLE:1584)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'upayweb1'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9962]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1596
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 2668) [dpxxdisp.c 8495]
Good Bye .....

Hi Juan 
I am sending you the log from dev_w0 
 
Thank you a lot, 
Vasil
 
 
 
trc file: "dev_w0", trc level: 1, release: "640" 
 
* 
ACTIVE TRACE LEVEL 1 
ACTIVE TRACE COMPONENTS all, M 
* 
B 
B Mon Jul 27 11:24:53 2009 
B create_con (con_name=R/3) 
B Loading DB library 'C:\usr\sap\UFT\SYS\exe\run\dbmssslib.dll' ... 
B Library 'C:\usr\sap\UFT\SYS\exe\run\dbmssslib.dll' loaded 
B Version of 'C:\usr\sap\UFT\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.43) 
B New connection 0 created 
M systemid 560 (PC with Windows NT) 
M relno 6400 
M patchlevel 0 
M patchno 43 
M intno 20020600 
M make: multithreaded, Unicode 
M pid 3740 
M 
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3740) [dpxxdisp.c 1160] 
I MtxInit: -2 0 0 
M DpSysAdmExtCreate: ABAP is active 
M DpSysAdmExtCreate: JAVA is not active 
M DpShMCreate: sizeof(wp_adm) 10528 (1316) 
M DpShMCreate: sizeof(tm_adm) 2780232 (13832) 
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80) 
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80) 
M DpShMCreate: sizeof(comm_adm) 290000 (580) 
M DpShMCreate: sizeof(vmc_adm) 0 (372) 
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184) 
M DpShMCreate: SHM_DP_ADM_KEY (addr: 060C0040, size: 3192688) 
M DpShMCreate: allocated sys_adm at 060C0040 
M DpShMCreate: allocated wp_adm at 060C1B58 
M DpShMCreate: allocated tm_adm_list at 060C4478 
M DpShMCreate: allocated tm_adm at 060C44A0 
M DpShMCreate: allocated wp_ca_adm at 0636B0E8 
M DpShMCreate: allocated appc_ca_adm at 06370EA8 
M DpShMCreate: allocated comm_adm_list at 06372DE8 
M DpShMCreate: allocated comm_adm at 06372E00 
M DpShMCreate: allocated vmc_adm_list at 063B9AD0 
M DpShMCreate: system runs without vmc_adm 
M DpShMCreate: allocated ca_info at 063B9AF8 
M DpShMCreate: allocated wall_adm at 063B9B00 
X 
X Mon Jul 27 11:24:54 2009 
X EmInit: MmSetImplementation( 2 ). 
X <ES> client 0 initializing .... 
X Using implementation flat 
M <EsNT> Memory Reset disabled as NT default 
X ES initialized. 
M 
M Mon Jul 27 11:24:55 2009 
M calling db_connect ... 
C Thank You for using the SLOLEDB-interface 
C Using dynamic link library 'C:\usr\sap\UFT\SYS\exe\run\dbmssslib.dll' 
C dbmssslib.dll patch info 
C patchlevel 0 
C patchno 43 
C patchcomment View with literal containing (0x60) (786638) 
C np:(local) connection used on UPAYWEB1 
C Using Provider SQLNCLI 
C OpenOledbConnection: MARS property was set successfully. 
C Provider Release:9.00.1399.06 
C Using Provider SQLNCLI 
C OpenOledbConnection: MARS property was set successfully. 
C Cache sizes: header 68 bytes, 20000 names (31520000 bytes), 1000 dynamic statements (5672000 bytes), total 37192068 bytes 
C Using shared procedure name cache UPAYWEB1_UFTUFT_UFT_MEM initialized by another process. 
C Connected to db server : [UPAYWEB1] server_used : [np:(local)], dbname: UFT, dbuser: uft 
C pn_id:UPAYWEB1_UFTUFT_UFT 
C Not using MARS (on sql 8.0) 
B Connection 0 opened 
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost 
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20090727 112454 UPAYWEB1 
C The IRow interface is supported by this OLEDB provider 
M db_connect o.k. 
I MtxInit: 0 0 0 
M SHM_PRES_BUF (addr: 0AD60040, size: 4400000) 
M SHM_ROLL_AREA (addr: 5EF60040, size: 160563200) 
M SHM_PAGING_AREA (addr: 0B1A0040, size: 72417280) 
M SHM_ROLL_ADM (addr: 0F6C0040, size: 1603610) 
M SHM_PAGING_ADM (addr: 0F850040, size: 525344) 
M ThCreateNoBuffer allocated 540152 bytes for 1000 entries at 0F8E0040 
M ThCreateNoBuffer index size: 3000 elems 
M ThCreateVBAdm allocated 12160 bytes (50 server) at 0F970040 
X EmInit: MmSetImplementation( 2 ). 
X <ES> client 0 initializing .... 
X Using implementation flat 
X ES initialized. 
C 
C Mon Jul 27 11:24:58 2009 
C The IRow interface is supported by this OLEDB provider 
B db_con_shm_ini: WP_ID = 0, WP_CNT = 8 
C Using Provider SQLNCLI 
C OpenOledbConnection: MARS property was set successfully. 
B dbtbxbuf: Buffer TABL (addr: 146900C8, size: 30000000, end: 1632C448) 
B dbtbxbuf: Profile: max_objects = 5000, displace = 1, reorg = 1 
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5 
B dbtbxbuf: protect_shm = 0, force_checks = 0 
B dbtbxbuf: tsize_retry = 14304000 
B ***LOG BB0=> buffer TABL started with length 30000000 bytes [dbtbxbuf#7 @ 15714] [dbtbxbuf1571 4] 
B dbtbxbuf: Buffer TABLP (addr: 163300C8, size: 10240000, end: 16CF40C8) 
B dbtbxbuf: Profile: max_objects = 500, displace = 1, reorg = 1 
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5 
B dbtbxbuf: protect_shm = 0, force_checks = 0 
B dbtbxbuf: tsize_retry = 5047296 
B ***LOG BB0=> buffer TABLP started with length 10240000 bytes [dbtbxbuf#7 @ 15714] [dbtbxbuf1571 4] 
B dbtbxbuf: Reading TBX statistics: 
B dbtbxbuf: Opening C:\usr\sap\UFT\DVEBMGS01\data\tbxnew failed (No such file or directory). 
B dbtbxbuf: Renaming C:\usr\sap\UFT\DVEBMGS01\data\tbxnew to C:\usr\sap\UFT\DVEBMGS01\data\tbxstat failed (No such file or directory). 
B dbtbxbuf: 0 object entries precreated 
C sloledb.cpp [ParamStmtExec,line 11888]: Error/Message: (err 8180, sev 0), Statement(s) could not be prepared. 
C Procname: [##Y3UPAYWEB1uft00000037400000000002112455] 
C sloledb.cpp [ParamStmtExec,line 11888]: Error/Message: (err 208, sev 16), Invalid object name 'DDLOG'. 
C Procname: [##Y3UPAYWEB1uft00000037400000000002112455] 
C ParamStmtExec failed. HR 80040e14 DBSL retcode 103. stmt: [SELECT MAX(SEQNUMBER) AS c FROM DDLOG ] 
C Conn_i:1 selection:1 singleton:1 flag_fupd:0 use_cursor:0 chksum: 112017 
C DbSlRead - Error 103 (dbcode 208) on open 
C DbSlRead - <##Y3UPAYWEB1uft00000037400000000002112455> 
C DbSlRead - Error 103 (dbcode 208) on fetch 
C DbSlRead - <##Y3UPAYWEB1uft00000037400000000002112455> 
B ***LOG BZY=> unexpected return code 103 calling SEL [dbsynseq#1 @ 255] [dbsynseq0255 ] 
B db_syinit failed 
M *** ERROR => ThCallHooks: event handler db_init for event CREATE_SHM failed [thxxtool3.c 252] 
M *** ERROR => ThIPCInit: hook failed [thxxhead.c 1901] 
M ***LOG R19=> tskh_init, ThIPCInit ( TSKH-IPC-000001) [thxxhead.c 1359] 
M in_ThErrHandle: 1 
M *** ERROR => tskh_init: ThIPCInit (step 1, th_errno 17, action 3, level 1) [thxxhead.c 9413] 
M 
M Info for wp 0 
M 
M stat = 4 
M reqtype = 1 
M act_reqtype = -1 
M rq_info = 0 
M tid = -1 
M mode = 255 
M len = -1 
M rq_id = 65535 
M rq_source = 255 
M last_tid = 0 
M last_mode = 0 
M int_checked_resource(RFC) = 0 
M ext_checked_resource(RFC) = 0 
M int_checked_resource(HTTP) = 0 
M ext_checked_resource(HTTP) = 0 
M report = > < 
M action = 0 
M tab_name = > < 
M 
M ***************************************************************************** 
M * 
M * LOCATION SAP-Server upayweb1_UFT_01 on host upayweb1 (wp 0) 
M * ERROR tskh_init: ThIPCInit 
M * 
M * TIME Mon Jul 27 11:24:58 2009 
M * RELEASE 640 
M * COMPONENT Taskhandler 
M * VERSION 1 
M * RC 17 
M * MODULE thxxhead.c 
M * LINE 9589 
M * COUNTER 1 
M * 
M ***************************************************************************** 
M 
M PfStatDisconnect: disconnect statistics 
M Entering TH_CALLHOOKS 
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP 
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730] 
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 252] 
M Entering ThSetStatError 
M Entering ThReadDetachMode 
M call ThrShutDown (1)... 
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3740) [dpnttool.c 357]

An active RFC Connection couldnot be found

Similar Messages

Maybe you are looking for