An AIM service error occurred. The server message was: Serv:

An AIM service error occurred. The server message was: Serv:RequestTimeout
What do I do,
I try to msg some people and this is what I get, I opened some ports, I still get the message though!
Anyone else?

Hi Dan,
I've used iChat in the recent past with no problems. Nothing had changed in my environment and I confirmed that with my ISP. Just recently I've been getting the AIM problem were it say no response for 10sec and then the session ends. Was using a cannon camera when the problem started so I bought an iSight and am still having the same issue.
I use it to talk to my son and his wife. We both use Comcast cable, we both have new iMac's.

Similar Messages

Aim An AIM service error occurred. Error: Serv:RequestTimeout

When using Aim in ichat there is a common error that occurs every 2 -3 minutes
the message that it gives me is
An AIM service error occurred. Error: Serv:RequestTimeout
Anyone help please
Thankyou
email:
[email protected]

And just about a month later this issue comes up again. It seems that time is the only real answer to fixing this issue. I tried a combination of solutions last night and when I woke up this morning, I launched iChat...it flickered (like it does before it says you have logged in too many times too quickly) and I immediately quit the app.
Started up Adium, works like a charm.
Opened ichat about a half hour later, and started flickering again..what gives
Message was edited by: xryancx

"An AIM service error occurred. Error: Serv:RequestTimeout" - Please help.

So I've been having the dreaded
"An AIM service error occurred.
Error: Serv:RequestTimeout"
pretty much ever since I got my MacBook Pro a year ago. Up until recently, it only popped up maybe once a month. But now it's gotten to the point where I get the error message within 5-10 minutes of a chad starting with someone else. I have tried changing the port and whatnot, but I still get the same error message. I have gone through pages of similar topic forums, but no solution has fixed my problem.
Does anyone have any advice?
P.S. I tried switching to Adium. I hate it.

Shut down the computer any router and modem.
Repower the Modem and wait until it says it is Ready.
Then any Router and wait again.
Lastly power up the computer.
Also check that any DNS servers listed in the modem or router set up pages are copied across to the Mac > System Preferences > Network (Maybe advanced button > DNS tab).
8:43 PM Monday; August 17, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

"AIM error. An AIM service error occurred. Error: Serv:RequestTimeout" wha?

i got this message,"AIM error. An AIM service error occurred. Error: Serv:RequestTimeout" and it happens every time i try and IM someone. anyone have any idea why? also...im new to ichat -- and am used to AIM. don't really understand it...therefore right now...don't like it. but im sure once i get the hang of it, i will...

Go to the iChat Menu > Preferences > Accounts > Server Settings and whilst Logged out of AIM change the port to 443 and then Log in to AIM.
10:22 PM Wednesday; August 6, 2008

An AIM service error occurred, but where to Log-Out ?

Here's a real basic question, due to be a head-slapping "of course !" ( I hope )
I just got Leopard last Sat, my brother Jim tonight, and he suggested an iChat so he could show me what was different on a big ol' MacPro.
There was a lot that mystified us about iChat on Tiger, let alone it's beefed-up Leopard incarnation, so I looked into it and got enough of the "An AIM service error occurred. Error: Serv:RequestTimeout " that I googled it and found this thread from right here on Apple Discussons : http://74.125.95.104/search?q=cache:H2ojIfDVIDoJ:discussions.apple.com/thread.js pa%3FthreadID%3D1208110An+AIM+service+error+occurred.+Error:Serv:RequestTimeout&hl=en&ct=clnk&cd=1&gl=us&client=safari
So many flummoxed by the same deal. But here's my problem & where I'm stupidly stuck :
To follow the suggestion & change server-ports, one must log out, but aside from Log-In being greyed out, I can find nowhere *to log out !* !!
It's one a' those really annoying Catch-22's too.
I have to log out to change the server-port, but can I change the port when logged-out ??
And where the *@#% is the log out option ?!
Heh-heh ( help )
( thanks )

Thanks Tony,
This time I went in, clicked in accounts from .mac to MoblieMe ( all I have is .mac and Bonjour . . . no AIM, which I thought I did ! ), but I decided MobileMe was likely not so "stable" and I switched it back to .mac. I checked Server Settings and I wasn't greyed out.
I switched it to 443, pioked around a bit, and now I am greyed out again !
I am also completely confused, if it ain't obvious !
but thanks again !

An AIM service error occurred. The server message was: Serv:RequestTimeout

Hi All, I have no idea why I started getting this message, and it is only when I start the chat , not when someone im's me and I answer back. I did change the port to 443 and then back and I don't know. I was working fine untill a few days ago. Thank You For any Help. makes me nuts!!! Please help,
Desperate Daj

If changing ports does not work and you can not login with iChat then check the Screen name and password you are using on the AIM or @mac site
http://discussions.apple.com/thread.jspa?threadID=121885
If you can log on to the the correct site you got your Screen name from then there is one more check if you are using @mac. This means making sure your Password is 16 characters or less.
If that is Ok or you have an AIM screen name then you go to Users/(your account)/Library/Preferences and delete com.apple.ichat.AIM.plist
and Restart iChat.
6:34 PM Saturday; December 15, 2007

An AIM service error occurred. Error: Serv:RequestTimeout

basically what title says, i send an im to a friend and this is what pops up
did the port changing didnt work
did the deleting aim.plist thingy didnt work
dont know where to go
ichat4.0.8

Hi,
So, now you have tried it with SSL on and Off and on Port 443 as well as port 5190.
You have tried deleting your screen Name from ichat and Re-adding it.
You have tried deleting the .plist
Have you tried restarting the computer ?
6:57 PM Monday; March 21, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

"An AIM service error" message

Whenever I try and sent an IM in iChat AV 3.1.8 I get the following message:
An AIM service error occurred. The server message was: Serv:RequestTimeout
I'm using iChat on 2 different macs and get the same message on both. I am able to receive IM's and there are 2 people on my buddy list that I can actually get an IM through to.
Any suggestions would help.
Thnx
GaryGart
PowerMac G5/PawerBook G4 Mac OS X (10.4.9)
PowerMac G5/PawerBook G4 Mac OS X (10.4.9)

Looking further.
Open iChat
Go to Preferences > Accounts
Make sure you are Logged out of AIM (Buddy list with no Buddies - done in the iChat Menu)
IN the Server Settings tab is the Server listed as login.oscar.aol.com ?
You have changed the port to 443 yes ?
You should have both iChat/computers set to Allow Multiple Logins for that AIM/@mac account.
The Password for your AIM or @Mac account used with iChat should be 16 characters or less.
It should also only be numbers or letters.
To start at the beginning.
1) iChat can login and show your Buddies ?
It is after this when trying to Text chat of any sort that you have problems ?
2) Do you have problems with A/V Chats ?
3) Have you ever tried a deletion of the preferences file com.apple.ichat.AIM.plist ?
4) Did you go through the Start up Screens like this ?
http://www.siriusaddict.com/ichat.html
5) Tell me how you have Added Buddies ?
Did it match the iChat 3 way http://www.ralphjohnsuk.dsl.pipex.com/page6.html ?
8:35 PM Sunday; May 20, 2007

AIM service error wont allow me to stay connected

An AIM service error occurred. The server message was: Serv:RequestTimeout.. It tells me this when i try to talk to someone.. It tells other people i am available and they instant message me but i dont recieve them.. I need help, this is a brand new macbook and will not allow me to stay connected to aim!

Hello,
To change the channels that the NetGear router is pushing the signal over, do the following:
Log into http://192.168.0.1 username: admin, password: password (this is the default unless you changed it, which I'd recommend for security anyway).
Go to wireless settings
Go to channel
Change it to something like "11" which seems to work best for me (although it can really depend with wireless interference in your area, other WiFi networks, cordless phones, microwaves, etc).
Go to the bottom and click save and then log out.
It could be possible that your wireless router is susceptible to wireless interference because of the channel it's communicating on and thus dropping your internet connection, thus causing AIM to disconnect.

AIM service error

I am trying to use iChat. When I do, I am able to send an IM to someone, but when they send an IM back, I get the following error message:
AIM error:
An AIM service error occurred. The server message was: Serv:RequestTimeout
and I am unable to view the IM from the other person.
iMac Mac OS X (10.4.8)

There have been issues with both @Mac.com screen names and the new Mobile me names that end @me.com
This has been because the change over has not been as smooth as Apple would have wished.
The AIM server have to check with these Lists to verify the Screen name and Password but the Apple end has had problems.
What it pays to do at present for a @me.com account is add it as if it is an AIM type name and type the whole ID including the suffix.
Some people have reported that this also works for @mac.com names
At this screen and Adding an Account in iChat > Preferences > Accounts and using the Plus Button....
Enter it like this ...
9:16 PM Wednesday; July 30, 2008

An error occurred attempting to install SQL Server 2008 Express Service Pack 1

i have Setup application with complete prerequisite requirement package create from Visual Studio 2010 setup application.And yes this setup working fine in windows 7 and windows vista but not working in windows xp service pack 3.and getting error when install "An error occurred attempting to install SQL Server 2008 Express Service Pack 1"Give me solution as soon as possible.I have listed summery.txt and log.txt. please refer it.Summery.txt
===============================================================Component SQL Server 2008 Express has failed to install with the
following error message:
"An error occurred attempting to install SQL Server
2008 Express Service Pack 1."
The following components were successfully
installed:
- Microsoft .NET Framework 4 Client Profile (x86 and
x64)
The following components failed to install:
- SQL Server 2008
Express
See the setup log file located at
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\install.log' for more
information.Install.log
==========================================================================The following properties have been set:
Property: [AdminUser]
= true {boolean}
Property: [InstallMode] = HomeSite {string}
Property:
[ProcessorArchitecture] = Intel {string}
Property: [VersionNT] = 5.1.3
{version}
Running checks for package 'Windows Installer 3.1', phase
BuildList
The following properties have been set for package 'Windows
Installer 3.1':
Running checks for command
'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe'
Result of running
operator 'VersionGreaterThanOrEqualTo' on property 'VersionMsi' and value '3.1':
true
Result of checks for command
'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe' is
'Bypass'
'Windows Installer 3.1' RunCheck result: No Install
Needed
Running checks for package 'Microsoft .NET Framework 4 Client Profile
(x86 and x64)', phase BuildList
Reading value 'Version' of registry key
'HKLM\Software\Microsoft\NET Framework Setup\NDP\v4\Client'
Unable to read
registry value
Not setting value for property
'DotNet40Client_TargetVersion'
The following properties have been set for
package 'Microsoft .NET Framework 4 Client Profile (x86 and x64)':
Running
checks for command 'DotNetFX40Client\dotNetFx40_Client_x86_x64.exe'
Result of
running operator 'ValueEqualTo' on property 'InstallMode' and value 'HomeSite':
true
Result of checks for command
'DotNetFX40Client\dotNetFx40_Client_x86_x64.exe' is 'Bypass'
Running checks
for command 'DotNetFX40Client\dotNetFx40_Client_setup.exe'
Result of running
operator 'ValueNotEqualTo' on property 'InstallMode' and value 'HomeSite':
false
Skipping ByPassIf because Property 'DotNet40Client_TargetVersion' was
not defined
Result of running operator 'ValueEqualTo' on property 'AdminUser'
and value 'false': false
Result of running operator 'VersionLessThan' on
property 'VersionNT' and value '5.1.2': false
Result of running operator
'ValueEqualTo' on property 'ProcessorArchitecture' and value 'IA64':
false
Result of checks for command
'DotNetFX40Client\dotNetFx40_Client_setup.exe' is 'Install'
'Microsoft .NET
Framework 4 Client Profile (x86 and x64)' RunCheck result: Install
Needed
Running checks for package 'SQL Server 2008 Express', phase
BuildList
Running external check with command
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SqlExpressChk.exe' and
parameters '10.0.1600 1033'
Process exited with code 2
Setting value '2
{int}' for property 'SQLExpressChk'
The following properties have been set
for package 'SQL Server 2008 Express':
Property: [SQLExpressChk] = 2
{int}
Running checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE'
Result of running operator
'ValueNotExists' on property 'VersionNT': false
Result of running operator
'VersionLessThan' on property 'VersionNT' and value '5.1.2': false
Result of
running operator 'VersionEqualTo' on property 'VersionNT' and value '5.2.0':
false
Result of running operator 'VersionEqualTo' on property 'VersionNT' and
value '5.2.1': false
Result of running operator 'ValueEqualTo' on property
'AdminUser' and value 'false': false
Result of running operator
'ValueEqualTo' on property 'SQLExpressChk' and value '-1': false
Result of
running operator 'ValueEqualTo' on property 'SQLExpressChk' and value '-2':
false
Result of running operator 'ValueEqualTo' on property 'SQLExpressChk'
and value '-3': false
Result of running operator 'ValueEqualTo' on property
'SQLExpressChk' and value '-4': false
Result of running operator
'ValueLessThan' on property 'SQLExpressChk' and value '-4': false
Result of
running operator 'ValueNotEqualTo' on property 'ProcessorArchitecture' and value
'Intel': false
Result of running operator 'ValueNotEqualTo' on property
'SQLExpressChk' and value '1': true
Result of checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE' is 'Bypass'
Running checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE'
Result of running operator
'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'Intel':
false
Result of running operator 'ValueNotEqualTo' on property
'SQLExpressChk' and value '2': false
Result of checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE' is 'Install'
Running checks for
command 'SqlExpress2008\SQLEXPR_x64_ENU.EXE'
Result of running operator
'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'amd64':
true
Result of checks for command 'SqlExpress2008\SQLEXPR_x64_ENU.EXE' is
'Bypass'
Running checks for command
'SqlExpress2008\SQLEXPR_x64_ENU.EXE'
Result of running operator
'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'amd64':
true
Result of checks for command 'SqlExpress2008\SQLEXPR_x64_ENU.EXE' is
'Bypass'
'SQL Server 2008 Express' RunCheck result: Install Needed
EULA
for components 'Microsoft .NET Framework 4 Client Profile (x86 and x64)' was
accepted.
EULA for components 'SQL Server 2008 Express' was
accepted.
Copying files to temporary directory
"C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\"
Downloading files to
"C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\"
(11/15/2014 3:59:51 PM)
Downloading 'DotNetFX40Client\dotNetFx40_Client_setup.exe' from 'http://go.microsoft.com/fwlink/?linkid=182804'
to 'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\'
Download completed at
11/15/2014 3:59:53 PM
Verifying file integrity of
C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\DotNetFX40Client\dotNetFx40_Client_setup.exe
WinVerifyTrust
returned 0
File trusted
(11/15/2014 3:59:53 PM) Downloading
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE' from 'http://go.microsoft.com/fwlink/?LinkID=153228&clcid=0x409'
to 'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\'
Download completed at
11/15/2014 4:00:22 PM
Verifying file integrity of
C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SQLEXPR32_x86_ENU.EXE
WinVerifyTrust
returned 0
File trusted
Running checks for package 'Microsoft .NET
Framework 4 Client Profile (x86 and x64)', phase BeforePackage
Reading value
'Version' of registry key 'HKLM\Software\Microsoft\NET Framework
Setup\NDP\v4\Client'
Unable to read registry value
Not setting value for
property 'DotNet40Client_TargetVersion'
The following properties have been
set for package 'Microsoft .NET Framework 4 Client Profile (x86 and
x64)':
Running checks for command
'DotNetFX40Client\dotNetFx40_Client_setup.exe'
Result of running operator
'ValueNotEqualTo' on property 'InstallMode' and value 'HomeSite':
false
Skipping ByPassIf because Property 'DotNet40Client_TargetVersion' was
not defined
Result of running operator 'ValueEqualTo' on property 'AdminUser'
and value 'false': false
Result of running operator 'VersionLessThan' on
property 'VersionNT' and value '5.1.2': false
Result of running operator
'ValueEqualTo' on property 'ProcessorArchitecture' and value 'IA64':
false
Result of checks for command
'DotNetFX40Client\dotNetFx40_Client_setup.exe' is 'Install'
'Microsoft .NET
Framework 4 Client Profile (x86 and x64)' RunCheck result: Install
Needed
Verifying file integrity of
C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\DotNetFX40Client\dotNetFx40_Client_setup.exe
WinVerifyTrust
returned 0
File trusted
Installing using command
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\DotNetFX40Client\dotNetFx40_Client_setup.exe'
and parameters ' /q /norestart /ChainingPackage ClientX64ClickOnce /lcid
1033'
Process exited with code 0
Running checks for package 'Microsoft
.NET Framework 4 Client Profile (x86 and x64)', phase AfterPackage
Reading
value 'Version' of registry key 'HKLM\Software\Microsoft\NET Framework
Setup\NDP\v4\Client'
Read string value '4.0.30319'
Setting value
'4.0.30319 {string}' for property 'DotNet40Client_TargetVersion'
The
following properties have been set for package 'Microsoft .NET Framework 4
Client Profile (x86 and x64)':
Property: [DotNet40Client_TargetVersion] =
4.0.30319 {string}
Running checks for command
'DotNetFX40Client\dotNetFx40_Client_setup.exe'
Result of running operator
'ValueNotEqualTo' on property 'InstallMode' and value 'HomeSite':
false
Result of running operator 'VersionGreaterThanOrEqualTo' on property
'DotNet40Client_TargetVersion' and value '4.0.30129': true
Result of checks
for command 'DotNetFX40Client\dotNetFx40_Client_setup.exe' is
'Bypass'
'Microsoft .NET Framework 4 Client Profile (x86 and x64)' RunCheck
result: Install Succeeded
Running checks for package 'SQL Server 2008
Express', phase BeforePackage
Running external check with command
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SqlExpressChk.exe' and
parameters '10.0.1600 1033'
Process exited with code 2
Setting value '2
{int}' for property 'SQLExpressChk'
The following properties have been set
for package 'SQL Server 2008 Express':
Property: [SQLExpressChk] = 2
{int}
Running checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE'
Result of running operator
'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'Intel':
false
Result of running operator 'ValueNotEqualTo' on property
'SQLExpressChk' and value '2': false
Result of checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE' is 'Install'
'SQL Server 2008 Express'
RunCheck result: Install Needed
Verifying file integrity of
C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SQLEXPR32_x86_ENU.EXE
WinVerifyTrust
returned 0
File trusted
Installing using command
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SQLEXPR32_x86_ENU.EXE'
and parameters '/q /hideconsole /action=Upgrade /instancename=SQLEXPRESS
/skiprules=RebootRequiredCheck'
Process exited with code
-2068578302
Status of package 'Microsoft .NET Framework 4 Client Profile (x86
and x64)' after install is 'InstallSucceeded'
Status of package 'SQL Server
2008 Express' after install is 'InstallFailed'
S S Manne

Hi Manne,
As your description, you come across an error when trying to install SQL Server 2008 express Service Pack 1 on windows XP Service Pack 3 machine. From your error log, I get the error(unable to read registry value). As my analysis, the issue could be due
to that your account doesn't have access to registry. Below are the recommendations for troubleshooting the issue.
1. Make sure that you log in as an administrator of the machine.
2. Please follow the steps below to make sure that you have granted the right permission to registry.
a. Located HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server in registry.
b. Right click and go to Permission, then you could see user accounts or groups. If your user account is not in the list, you could click Add to add your account there.
c. Select your account and Click on Advance.
d. Check on both check box ('Include inheritable permissions from this object's parent'.
and 'Replace all child object permissions with inheritable permissions from this object'), click OK.
e. Click OK again.
Regards,
Michelle Li

Unable to open PWA in browser and MSP on application server in project server 2007. ERROR: Sending the Soap message failed or no recognizable response was received.

Hi All,
I am using project server 2007 and WSS 3.0.
I have been facing a strange issue for couple of days. I am unable to open PWA in browser and MS Project Pro on application server.
Everything is correct whether it is URL or MS Project profile account on MSP. This is strange because i can open same PWA/MSP from other computers (Database server / Client PCs) but not locally on server.
When i try to connect to MSP on App server, i get the following errors in event viewer.
Event Type: Error
Event Source: MSSOAP
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description:
Soap error: Connection time out..
Event Type: Error
Event Source: MSSOAP
Event Category: Client
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description:
Soap error: An unanticipated error occurred during the processing of this request..
Event Type: Error
Event Source: MSSOAP
Event Category: Client
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description: Soap error: Sending the Soap message failed or no recognizable response was received.
Event Type: Error
Event Source: MSSOAP
Event Category: Client
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description:
Soap error: Unspecified client error..
One more issue i am facing and i guess that is related to above issue. The Issue is, when i am creating a new project, It's workspace gets created but doesn't get linked to the project and i can't link it manually because it already exists for the project.
sandeep

Hi Paul ,
Thanks for reply. The project server URL was already added to the Trusted
Sites/Local Intranet areas in IE.
sandeep

An error occured while sending mail: SMTP server error. The server responded: (null)

I'm getting this set of error messages intermittantly:
<P>
An error occured while sending mail: smtp server error
the server responded: (null) contact email admin
for assistance
other message
an error occured while sending mail: smtp server error
the server responded: intermail,
end with quote.quote contact email admin
for assistance
<P>
This problem may occur at low-use times when Messaging is installed with the
Trend virus protection software on the same system.
<P>
Change the version of the Trend software from 3.0 to the older 2.62 version.

It's possible that your provider has made a change.
I think STARTTLS usually is used with port 587, instead of the standard SSL port 465.
Could you look up your provider's current SMTP settings to see whether your "Outgoing Server" settings need to be updated? If it's difficult to translate between your provider's help page and Thunderbird's dialog controls, you could provide a link to your provider's help page.

When connecting to cube via msmdpump.dll, an error pops up saying the following system error occurred: the server threw an exception

users are able to pick the SSAS database and cube, it's at the final step and suddenly excel had this error:
The following system error occurred: the server threw an exception...
Other users have no such issues at all
any ideas?
thanks
--Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --

Hi Cat_ca,
Glad to hear that your issue had been solved by yourself. Thank you for your sharing.
Regards,
Charlie Liao
TechNet Community Support

HT203200 Movie Rental error - i keep getting the message "We could not complete your Itunes store request. an unknown error occured (-42110). There was an error in the Itunes store. Please try again later.... any help?

Movie Rental error - i keep getting the message "We could not complete your Itunes store request. an unknown error occured (-42110). There was an error in the Itunes store. Please try again later.... any help?

Perhaps try the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

An AIM service error occurred. The server message was: Serv:

Similar Messages

Maybe you are looking for