An anoying problem with wicd logging to terminal

when ever i start wicd and i haven't strarted my x server yet it logs messages to my terminal while i am trying to use it
this is very anoying and i would like to know why it does that and if its possible to turn it off

Not a Sysadmin issue, moving to NC...

Similar Messages

[Solved]Problem with Wicd and D-bus

I get this error at login:
"could not connect wicd d-bus interface. Check thw wicd log for error messages"
I restarted both wicd and dbus demons, but didnt work.
bash-3.2# wicd-client
Importing pynotify failed, notifications disabled.
Has notifications support False
Loading...
Connecting to daemon...
Can't connect to the daemon, trying to start it automatically...
Connected.
ERROR:dbus.proxies:Introspect error on :1.29:/org/wicd/daemon: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus)
warning: ignoring exception org.freedesktop.DBus.Error.ServiceUnknown: The name :1.29 was not provided by any .service files
warning: ignoring exception org.freedesktop.DBus.Error.ServiceUnknown: The name :1.29 was not provided by any .service files
bash-3.2#
Last edited by Philip J. Fry (2009-06-29 20:05:33)

If I'm running kdm, I have no issue at all with wicd-client loading, however if I log into a wm/de (usually openbox) without kdm running wicd-client will not load, even after trying the above solutions....
Importing pynotify failed, notifications disabled.
Has notifications support False
Loading...
Connecting to daemon...
Can't connect to the daemon, trying to start it automatically...
(gksudo:19015): Gdk-CRITICAL **: gdk_x11_atom_to_xatom_for_display: assertion `atom != GDK_NONE' failed
(gksudo:19015): Gdk-CRITICAL **: gdk_x11_atom_to_xatom_for_display: assertion `atom != GDK_NONE' failed
(gksudo:19015): Gdk-CRITICAL **: gdk_x11_atom_to_xatom_for_display: assertion `atom != GDK_NONE' failed
(gksudo:19015): Gdk-CRITICAL **: gdk_x11_atom_to_xatom_for_display: assertion `atom != GDK_NONE' failed
Connected.
ERROR:dbus.proxies:Introspect error on :1.10:/org/wicd/daemon: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.9" (uid=1000 pid=19009 comm="python -O /usr/lib/wicd/wicd-client.py ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.10" (uid=0 pid=19066 comm="python -O /usr/lib/wicd/wicd-daemon.py "))
warning: ignoring exception org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.9" (uid=1000 pid=19009 comm="python -O /usr/lib/wicd/wicd-client.py ") interface="org.wicd.daemon" member="GetConnectionStatus" error name="(unset)" requested_reply=0 destination=":1.10" (uid=0 pid=19066 comm="python -O /usr/lib/wicd/wicd-daemon.py "))
warning: ignoring exception org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.9" (uid=1000 pid=19009 comm="python -O /usr/lib/wicd/wicd-client.py ") interface="org.wicd.daemon" member="GetNeedWiredProfileChooser" error name="(unset)" requested_reply=0 destination=":1.10" (uid=0 pid=19066 comm="python -O /usr/lib/wicd/wicd-daemon.py "))
anubis@thor ~/ $

Problem with RFC for Risk Terminator - GRC 5.2 SP12

We are having a problem with the RFC connection for Risk Terminator in one of our SAP environments. It is working in our 'DV3' environment, but not in our 'RT3' environment. Everything is set up just the same in both environments and all SAP Adaptors show green.
This was working in RT3 when we first upgraded to GRC 5.2 last November, but it now gives me an error when I do an update with PFCG and it calls RT. The error message and our Basis support group both say the RFC needs to be 'registered', but our SAP Support contact during our upgrade said it does not, and I can't find any documentation that says this is required also. Plus it was working before even though it was unregistered.
What is causing this problem and how do I resolve it?
Also, if these RFCs do not have to be registered, is there some documentation that states this that I can show to our Basis group?
Thanks.

What about the question of the RFC needing to be registered? This is the solution our Basis group thinks is required, so it will be hard to get them to do anything else until this issue has been addressed.
Thanks.

PROBLEM WITH CALL LOGS/CONTACTS

HI FRIENDS,
I AM FACING A WIERD PROBLEM WITH MY Z10, WHEN I GET A CALL OR A MISS CALL THE NUMBER SHOWS UNDER A DIFFERENT CONTACT NAME HOWEVER THE ORIGINAL CONTACTS REMAIN UNCHANGED AS IT ONLY HAPPENS IN CALL LOG PAGE.
CAN ANYONE PLEASE HELP ME ON THE SAME.

Hello chiragmandavia and welcome to the BlackBerry Support Community Forums.
Sorry to hear you're experiencing an issue with your Call Logs.
Is the name in the log showing as a different contact entirely, or is the name not how you manually entered it in your phone?
Does this happen with all your contacts in the logs or just specific ones?
Do you have multiple link sources for your Contacts in the Contacts app?
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Problem with call log and email signature...

Hi, I have 2 little problem with my BB
First, the day won't appear in the call logs. It only displays the month like 08/dd.
Pic 1
Second, when I send emails, my signature gets all mixed up because of my french punctuation, any idea why ?
Pic 2
Message Edited by Jerg on 08-09-2009 11:29 AM
Message Edited by Jerg on 08-09-2009 11:31 AM

Wow, that's REALLY low. That number means there's only 6MB free. It's recommended to have AT LEAST 15MB free. Check under Options | Status, hit the menu button, then choose Database Sizes. What number is listed for Total Size at the top?
If the Content Store is really big then that means all of the media files (pictures, videos, etc) are being saved in the device memory rather than on a media card. Does your boss have a media card to store the media on?
Did you also change the Keep Appointments setting to something lower like you did with the Keep Messages setting?
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

Problems with java logging utility

Hi,
I am having a few problems with java's logging framework.
When I create a logger using
Logger log = Logger.getLogger("my.com");
and log my messages using this "log" object, the messages are logged to System.err which is my console. But when I add a Filehandler to this Logger object, I get log messages both in the file and the standard error.
The problem is that I want to supress logging to the standard error but do not know how to do this. I tried a few things:
1) If I close the standard error (System.err.close() ), things work fine but I can't afford doing this since other parts of my application might use System.err for some purpose.
2) I thought that , by default, a ConsoleHandler object is added to the Logger object. So I thought I might get around the problem if I close() this ConsoleHandler object. But, to my surprise, log.getHandlers() returns an empty array by default. So there is no ConsoleHandler attached to it.
Any info. regarding it will be very much appreciated.
Thanks,
Arch.

Logger.setUseParentHandlers(false)

RollingFileAppender/Log4J question (problem with reading logging)

Hi everyone,
I've got a question about log4j.
I'm working with an application that generates a lot of logging. When I'm trying to figure out problems in the application it's hard to read the log files because they get updated/overwritten all the time.
The mechanism of the RollingFileAppender of log4j is that when the maximum file size is reached a new log file is created with <filename>.1 and the name of every file that already existed is increased with 1.
So when I try to read my logfiles they get overwritten while I'm reading it because the application generates a new logfile sometimes 4 times per minute. That's very annoying, so what I would like to have is that everytime a new logfile is created it's number is increased with 1 until a maximum of files and then start over.
I've been trying to find this mechanism somewhere but can't find it. The DailyRollingFileAppender kinda does what I want but you can't set a maximum of files and I can't have that because of the space available on the server.
Does anyone know how to solve this?

I've got a question about log4j.
I'm working with an application that generates a lot
of logging. When I'm trying to figure out problems in
the application it's hard to read the log files
because they get updated/overwritten all the time.
The mechanism of the RollingFileAppender of log4j is
that when the maximum file size is reached a new log
file is created with <filename>.1 and the name of
every file that already existed is increased with 1.
So when I try to read my logfiles they get
overwritten while I'm reading it because the
e application generates a new logfile sometimes 4
times per minute. That's very annoying, so what I
would like to have is that everytime a new logfile is
created it's number is increased with 1 until a
maximum of files and then start over.That's not Log4J's problem. That's your problem for treating log files like production data. Maybe you need to use something else, like writing this supposedly persistent data to a database.
I've been trying to find this mechanism somewhere but
can't find it. The DailyRollingFileAppender kinda
does what I want but you can't set a maximum of files
and I can't have that because of the space available
on the server.What stops you from introducing another periodic process, to purge old log files? That's what most would do.

J2ee.jar causes problems with commons-logging.jar

Hi All -
(JDK 1.5.0_03, commons-logging 1.0.4, latest j2ee.jar, Eclipse 3.1.0 RC3 )
I am developing some components that are to be used within j2ee containers and in standalone mode as well. When I run the software under Tomcat, it works correctly (Tomcat is not using the j2ee.jar that comes with Sun's App server obviously), but when I develop with the j2ee.jar file that comes with Sun's App server, I can't use commons-logging. For example, the code supplied below (a class with only this line in the main method, not using any j2ee features) will fail JUST by having j2ee.jar in my path, but if I take it out of the path, it works fine. I am also on the commons-logging mail list and no one there has been able to solve this issue for me. Again, if I deploy my application to Tomcat, I don't have this problem.
The isolated line that is giving me the issue (and will give the issue even in a non j2ee application that just has this one line) is this:
log= LogFactory.getLog(CommonsLoggingTest.class);
When I run this without j2ee.jar in the path, it works fine. When I run it with j2ee.jar in the path, I get this:
Exception in thread "main" org.apache.commons.logging.LogConfigurationException: org.apache.commons.logging.LogConfigurationException: java.lang.NullPointerException (Caused by java.lang.NullPointerException) (Caused by org.apache.commons.logging.LogConfigurationException: java.lang.NullPointerException (Caused by java.lang.NullPointerException))
     at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:543)
     at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:235)
     at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:209)
     at org.apache.commons.logging.LogFactory.getLog(LogFactory.java:351)
     at com.redhawk.testing.CommonsLoggingTest.doTest(CommonsLoggingTest.java:27)
     at com.redhawk.testing.CommonsLoggingTest.main(CommonsLoggingTest.java:45)
Caused by: org.apache.commons.logging.LogConfigurationException: java.lang.NullPointerException (Caused by java.lang.NullPointerException)
     at org.apache.commons.logging.impl.LogFactoryImpl.getLogConstructor(LogFactoryImpl.java:397)
     at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:529)
     ... 5 more
Caused by: java.lang.NullPointerException
     at org.apache.commons.logging.impl.LogFactoryImpl.getLogConstructor(LogFactoryImpl.java:374)
     ... 6 more
Anyone have any ideas? Its really annoying to have to take this jar file out of my path every time I want to run a test. I could just start developing against other implementations of the j2ee classes I need (for example, Tomcat's jar files do not give this error) but for various reasons that is also undesirable.
Thanks!
Jason

This problem does not arise with commons-logging 1.0.3.
Any idea what is different in 1.0.4 that would introduce problems when Sun's j2ee.jar is in the path?

[solved] problem with wicd and broadcom

I have a compaq 515 with broadcom wireless
lspci:
03:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
I installed the b43 firmware from AUR
parts of rc.conf:
MODULES=(b43 ssb !b43legacy fglrx)
DAEMONS=(@syslog-ng !network dbus netfs @crond @alsa wicd)
iwconfig:
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg Mode:Managed Access Point: Not-Associated
Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
ifconfig:
eth0 Link encap:Ethernet HWaddr 18:A9:05:85:D4:D1
inet addr:192.168.1.7 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::1aa9:5ff:fe85:d4d1/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:7173 errors:0 dropped:0 overruns:0 frame:0
TX packets:5175 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:8792798 (8.3 Mb) TX bytes:631272 (616.4 Kb)
Interrupt:16
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
wlan0 Link encap:Ethernet HWaddr 0C:60:76:6C:96:8A
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
sudo iwlist wlan0 scan:
wlan0 No scan results
wicd tells me it can't find wireless networks, wired works fine and it's managed with wicd
wireless works right on kubuntu, but not on arch
can anyone help me?
Last edited by rolo2005 (2010-07-17 06:45:14)

sorry but after reboot everything works fine
mods: delete this thread if you want

I can not log on to my itunes account on my second generation ipod but I have no problem with the log on with my ipad. The password doesn't work on the ipod touch. Thoughts???

Trouble connecting to itunes store with my password on my ipod touch (2nd generation) but using the same apple id and password on my ipad2 I don't have a problem connecting to the store.
Need troubleshooting

I have the same thing, same issues. Just came from Colorado using my iPad extensively with no problems.
Get back home, there is an update on my home computer for Airport Extreme to 7.5.2 which I updated. Also updates for iPad for 4.3.4 and now last night 4.3.5.
Still does not work. I have not taken the iPad to another network locally, but my understanding is that it is not a problem with the iPad but with Airport Extreme's update. I have done all the resets, restarts, and turning on and off Wifi on the iPad and that does not work.
I would have to assume Apple is working on it. Very frustrating since I am on my Mac Pro, iPhone 4, and other things and no problem.

Triggering Problems with a SCB-68 Terminal

Hello
I nedd some suggestions about triggering with a SCB-68 terminal.
I would like to make a triggered aquisition. I need to use to poles? That is, I nedd to connect the high digital pole (+5V) to the PFI0 screw terminal and the low pole (+0V) to the pin# 44 or is enough to connect the sole high pole to PFI0.
If I measure voltage between pin#11 (PFI0) and pin#44 (GND) I get +5 V. Is that correct? How can I trigger my acquisition with a digital signal of +5V if the PFI0 already is at +5V?
I don't understand
Hope someone kindly help me.
Thanks
Moreno

Thank you so much for the answer.
There was a bad explanation maybe. I'm really using a trigger form +0V to +5V. The most important thing that I would like to know is: is correct the between PFI0 and the pin#11 (DGND) there are +5V without any external connection (at open circuit)
Thanks a lot
Moreno

Problem with Firefighter logs after upgrade to 5.3 from 5.2

Hello Gurus ,
just for 2 weeks we are running GRC 5.3 , which we updated from the 5.2 version .
Unfortunately i could not make all the possible tests in one day and after i didnt check the FF reports .
So after 10 days..after solving some issues from the upgrade i realized that in SPM (Superuser Priviliege Management ) we have a problem as well .
We cant perform anymore reason / activity reports because the data are empty.By empty i mean all the entries users made dissapeard. I searched the two tables that normally should have the data (/virsa/zffcdhdr and the STXH ) but with no luck .
The other problem is..that after the upgrade to 5.3 from 5.2 the grcservice user that is responsible for the job /VIRSA/ZVFATBAK didnt had enough authorization to complete the job , thing that before worked fine .
So for 10 days the job didnt run and when i run the log report i see for every FFID the message "BACKGROUND JOB WAS NOT SCHEDULED/LOG & FILE NOT YET GENERATED"
When i look directly in the tables CDHDR and CDPOS i can see the data that the log needs.
But how can i reconstruct the FF log with this data ? Because when the auditor comes i would like to have the complete logs.
thank you all for the support
Cheerz ,
david

Hi David,
Please go through the SAP Note [1143639|https://service.sap.com/sap/support/notes/1143639] (and subsequent Notes). I hope it is of help, at least partially.
Best regatds,
Feri
Edited by: Ferenc Orosz on Apr 2, 2009 2:43 PM

Problem with view Log/Trace

I have installed Peoplesoft 8.9 peopletools 8.49 and web logic 9.2 and tuxedo 9.1.
I have installed everything succesfully.
I have configured the Process scheduler successfully.
In the reportnode(REP_NODE, the name i have given for the reporting node), i have set the URL as "http://localhost:8100/psreports/ps"( i don't know whether this is right or wrong. please let me know if that is wrong). and the URI Host as "SchedulerTransfer/ps" and URI port as 8100.
Now i went to the servers link and selected the PSNT and went to the distribution tab and i have given the report node as REP_NODE.
Maximum Transfer Retries as 3
Interval for Transfer Attempt as 30 seconds
Transfer System Files to Report Repository is checked.
Now when run any process the the distribution status is going to "posted". but the files are getting transferred to C:\FSDMO but not to C:\psreports.
when i click on the "Details" in the process monitor the "View Log/Trace" link is enabled and i go inside. i see the log files for that process.
I have the Problem here. when i click that it NOT showing any data. that is my problem.
Please tell me how to get my log files opened in "View Log/Trace" link .
Thank you,
Bye.

Hi Nicolas, Thanks for you reply.
What did you define in the configuration.properties file of your webserver for the parameter ReportRepositoryPath ?The ReportRepositoryPath is "c:\psreports"
http://img84.imageshack.us/my.php?image=configurationpropertieszm6.jpg
What is the URL of the link to the files (right click
on the link, then properties) ?http://localhost:8100/psreports/ps/4165/AE_PSXPARCHATTR_5391.stdout
"SchedulerTransfer/ps" is the URI resource.My bad, I gave "SchedulerTransfer/ps" under URI resource NOT in URI host. i just typed it wrong.
http://img501.imageshack.us/my.php?image=reportnodevf6.jpg
Are you connected with a URL as
http://localhost:8100/psp/ps/... ?
yes, i connect to peoplesoft this way.
if the image is not clear, just click on the image once.
Do we need to reboot app server/web server after we change something to the report node.(people tools -> process schedulet -> report nodes.
Thank you,
Bye.
Message was edited by:
user609854

Problems with BNC and chassis termination

Hi All,
forgive me if this is the wrong forum but i assume someone here from a test and measurement background will be able to help.
I am trying to measure leakage current using a source meter and electrometer. The problem i have is that the termination method of my instruments is BNC. The DUT i am measuring is inside a shielded diecast box. In order to make my measurement i am using the chassis and the outer core of the coax cable as the reutn path. However i do not know if this will increase noise within the measurement. I am measuring currents in the Nanoamp region.
Also from a safety point of view i am using high voltage and having the return path going through the diecast box does not sit well with me.
Does anyone have any opinions on this or can advise on a better solution?
Thank You
Andy
Here is a diagram of what i am doing
https://forums.tm.agilent.com/community/download/file.php?id=8518&mode=view: https://forums.tm.agilent.com/community/download/file.php?id=8518&mode=view

Yes i have tried this setup and i do get measurments in approximate range. The trouble is its a leakage current test in the Nanoamp range, ideally the leakage should be as small as possible but i am concerned that the config/setup is causing or adding an error to the reading.
Also i have concerns over the safet of the setup. The only NI product i am using is labview 8.5 to control the instruments but this post is not really a software issue.
Thanks

Problem with the log file path on the Data Logging Control Veristand

Hello everyone,
My problem is that I use a computer as a gateway on the network. It is connected to PXI in Real Time. I have another computer connected to the gateway to read the given PXI. I am unable to record on my local hard drive using the Data Logging Control VeriStand on the second computer. However, it can save me on the hard disk on the network. Moreover, I have no problem to record if the computer is a gateway.
Regards,
Kamal Bouamran

For simplicity, let's call the computer running Veristand Computer A and the gateway computer Computer B.
So, just to clarify, you're running the Veristand workspace on Computer A, which is connected to your network and the RT PXI (on which the system definition file is deployed) through a gateway, Computer B. With this setup, you can't use a data logging control to save a file to Computer A's hard drive. However, you are (from the workspace running on Computer A) able to save a file to Computer B's disk or to another drive elsewhere on your network. Is that all correct?
What happens when you try to configure the control to log to computer A's disk? Do you get an error (and if so, what error)? Does the file path default to a different location?
Also, what version of Veristand are you using? What version of Windows are you PCs running?
Regards,

An anoying problem with wicd logging to terminal

Similar Messages

Maybe you are looking for