An Attempt was made to reference a token that does not exist - SAPB1 8.8

Dear All,
System throws an error message as "An Attempt was made to reference a token that does not exist" while connecting Add-on in Client system in SAP Business 8.8 version
Please do the needful
Thanks & Regards
Venkatesh N

Hi Venkatesh N,
Are you got any solution for this issue?
I also face a same problem with you. I got the a reply is "Reinstall the application".
But this is not the main solution for the problem.
If you got any solution, hope you can share with me.
Thank you.
regards,
Sheon

Similar Messages

The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.

I am experiencing this error with one of our cluster environment. Can anyone help me in this issue.
The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.
Thanks,
Venu S.
Venugopal S ----------------------------------------------------------- Please click the Mark as Answer button if a post solves your problem!

Hi Venu S,
Based on my research, you might encounter a known issue, please try the hotfix in this KB:
http://support.microsoft.com/kb/928385
Meanwhile since there is less information about this issue, before further investigation, please provide us the following information:
The version of Windows Server you are using
The result of SELECT @@VERSION
The scenario when you get this error
If anything is unclear, please let me know.
Regards,
Tom Li

Can't open MMC - An attempt was made to reference a token that does not exist

I have a Windows 7 Pro, x64 - I'm trying to open the MMC and I get the error:
An attempt was made to reference a token that does not exist.
Ok, I open a cmd prompt (elevated), goto the \windows\system32 dir and run the command:
For /F %s in (‘dir /b *.dll’) do regsvr32 /s %s
And I just get "the system cannot find the file 'dir.
I have no idea what this means. Many others who have ran that command have had success (from looking at other forums). Just my luck - it doesn't work.
What do you think could be wrong here?

For /F %s in (‘dir /b *.dll’) do regsvr32 /s %s
And I just get "the system cannot find the file 'dir.
I have no idea what this means.
It means you have a bug in your script and because of the bug the script tried to look for a file named "dir".
So what's the /F for in the script?
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

"attempt was made to reference a token that does not exist"

Hello expert
when ever i run my ard .I got this error
"attempt was made to reference a token that does not exist"
and after that
"Incorrect string for add-on"
this my code for connecting the addon to sap b1 and i am putting code of addon identifier string of solution type .i am not what is the problem
    Public Function GetApplication() As SAPbouiCOM.Application
        Try
            Dim objApp As SAPbouiCOM.Application
            Dim objSboGuiApi As New SAPbouiCOM.SboGuiApi
            Dim strConnectionString As String = Environment.GetCommandLineArgs.GetValue(1)
            '   Dim strConnectionString As String = Command()
            objSboGuiApi = New SAPbouiCOM.SboGuiApi
            'by vilas
            objSboGuiApi.AddonIdentifier = "500055230354241534953303030303030373937303A46303535303435343033390FC9CB682961A45865F5346418639642BBAC26F3"
            objSboGuiApi.Connect(strConnectionString)
            objApp = objSboGuiApi.GetApplication()
            Return objApp
        Catch ex As Exception
            MessageBox.Show(ex.Message)
        End Try
    End Function

This is a .NET error, a Google search for it turns up a lot of results so I would pursue that as it does not seem to be a B1 specific error. In many cases it seems related to ASP.NET, but not all so I suggest searching for
"attempt was made to reference a token that does not exist" -ASP

An attempt was made to referance a token that does not exist

I am getting the above error on starting the add-on only on some clients. I click OK. The add-on is not started. Then I go to the add on manager menu and start the add-on. It starts fine. The UI connect code is as follows:
theSboGuiApi.Connect(mStrFromCmmd)
mSboGuiApp = theSboGuiApi.GetApplication(-1)
Am I doing anything wrong? Why this happens only on some clients?
I have checked the DI API is of correct version.
Waiting for your response. Thanks in advance.
Regards,
Prakash

Hi Marc,
Did you create your addon via the B1 Addon Wizard? My problem probably wasn't caused by the wizard, but a fix that the support folks gave me involved changing some of the code created by the wizard.
The connection string I was getting from the following wizard code was messed up (the string was way too short):
            'If (System.Environment.GetCommandLineArgs().Length = 1) Then
            '    connStr = B1Connections.connStr
            'Else
            '    connStr = System.Environment.GetCommandLineArgs().GetValue(1).ToString()
            'End If
As you can see, I've commented it out and replaced with this:
   connStr = System.Environment.GetCommandLineArgs(1)
(Doing it that way requires you to have the debug connection string set on the debug command line properties for the project). This solved my problem with this error message.

The list of workflow actions on the server references an assembly that does not exist

Hi,
This issue has been discussed many times in this forum , the reason why I am posting is I tried the resolution steps but I dont see any luck.
I am getting the below message from the SharePoint designer 2007 when I am trying to modify a workflow
"This list of workflow actions on the server references an assembly that does not exist. Some actions will not be available. The assembly strong name is Microsoft.SharePoint.WorkflowActions, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c.
Contact your server administrator for more information."
#1 : One of the post says "Normally you would see that error because someone has extended the Workflow actions available in SPD with a custom action developed in Visual Studio. These custom actions are loaded when your workstation reads the WSS.ACTIONS
file on the server. The file is located in the 12 hive under Template\1033\workflow. Your WSS.Actions file contains a reference to a custom action .dll which is not available on the server."
I opened the WSS.Actions file in notepad, I dont see any line with *.dll in it. Am I missing something?
#2: Another post says "The solution I discovered was that the server running my SharePoint Services was not up to .NET 3.0. As soon as I updated to .NET 3.0 everything worked.I had made sure the machine running SharePoint Designer was updated, but
had missed the SHarePoint Services server."
The server is already updated to .Net 3.0.
#3: I went to the %System Drive%\Documents and Settings\Local Settings\ApplicationData\Microsoft\SharePointDesigner.
Deleted the ProxyAssemblyCache folder but no luck.
Just checking if any one was able to resolve this issue by following any of the solution other than the above mentioned ones.
Thanks,
Cutloo

    I have the similar issue with my custom work flow. I have searched the whole day for the solution but no success, then at last a simple track works for me. Please try this if any one faces such issue.
Basically the assembly that we have define in the ACTIONS file dose not exists on the server, because of two reasons, either we have given the wrong assembly name (in our case the namespace name inside our solution) or the PublicKeyToken may differ from the
original assembly, that are deployed in GAC.
    So cross check both of these, in my case the assembly name was fine,
<Action
    Name="Move Item to Another List and Send Email"
    ClassName="MyAssemblyName.Classname"
    Assembly="MyAssemblyName,Version=1.0.0.0, Culture=neutral, PublicKeyToken=4053d1fde8a1c781"
    AppliesTo="all"
    Category="Email actions">
But the problem was in the 'PublicKeyToken', so i double click on the feature inside my solution,then in the bottom i have clicked on the manifest tab to check the entries.
<Feature xmlns="http://schemas.microsoft.com/sharepoint/" Title="MyAssemblyName Feature1" Id="f7f1bda0-5f65-40f1-a705-f6f15a41da3a" ReceiverAssembly="MyAssemblyName, Version=1.0.0.0, Culture=neutral, PublicKeyToken=0c32dbb769ed64b5"
ReceiverClass="MyAssemblyName.Features.Feature1.Feature1EventReceiver" Scope="WebApplication"></Feature>
Here i got the actual PublicKeyToken for my assembly (0c32dbb769ed64b5), i have replaced this number inside ACTIONS file, deploy the soultion, reset IIS.
It works for me,

Business Management Error: You are attempting to create a user with a domain logon that does not exist. Select another domain logon and try again.

Hello,
Suddenly the working CRM is being stopped for some group of users.
I drilled down to the issue and have checked that the users from Domain in which CRM is installed are having CRM access.
But for other domain user having problem to access CRM.
I tried to add a user from a domain which is not of CRM domain then it gives following error.
"Business Management Error: You are attempting to create a user with a domain logon that does not exist. Select another domain logon and try again.
<Message>LookupAccountNameW failed with error</Message> "
The change is made - AD group have upgraded Activer Directory server to 2012 R2
Please help as the Production CRM is not working for other domain user.

We have Activer Directory Structure like below.
One Root Domain says A
and there are multiple child domain like B,C,D etc...
B,C and D are all in same level,they are child of A domain.
There are two way transitive trusts between A and all the child Domain.
But there is no trust in between B and C and so on.
Our CRM server is in B domain and B domain's user can access CRM but users of Domain C,D and so on can not access CRM.
If this post answers your question, please click "Mark As Answer" on the post and "Mark as Helpful"

A pool operation was specified for a pooled resource that does not belong t

hi i left the server running for days so my application was running i refresh the page by clicking the ok button in small popup box,the page was refresh but when i what to select my lov am geting this error
A pool operation was specified for a pooled resource that does not belong to the resource pool.
Error
java.lang.NullPointerException
Caused by: java.lang.NullPointerException
     at oracle.adf.model.binding.DCIteratorBinding.initSourceRSI(DCIteratorBinding.java:1797)
     at oracle.adf.model.binding.DCIteratorBinding.callInitSourceRSI(DCIteratorBinding.java:1672)
     ... 187 more
## Detail 0 ##
java.lang.NullPointerException
     at oracle.adf.model.binding.DCIteratorBinding.initSourceRSI(DCIteratorBinding.java:1797)
     at oracle.adf.model.binding.DCIteratorBinding.callInitSourceRSI(DCIteratorBinding.java:1672)
     at oracle.adf.model.binding.DCIteratorBinding.internalGetRowSetIterator(DCIteratorBinding.java:1645)
     at oracle.adf.model.binding.DCIteratorBinding.getRowSetIterator(DCIteratorBinding.java:1607)
     at oracle.jbo.uicli.binding.JUCtrlListBinding.setupListItems(JUCtrlListBinding.java:725)
     at oracle.jbo.uicli.binding.JUCtrlListBinding.getDisplayData(JUCtrlListBinding.java:3586)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlListBinding$1.size(FacesCtrlListBinding.java:382)
     at java.util.AbstractList$Itr.hasNext(AbstractList.java:339)
     at oracle.adfinternal.view.faces.renderkit.rich.SelectItemUtils.addSelectItems(SelectItemUtils.java:207)
     at oracle.adfinternal.view.faces.renderkit.rich.SelectItemUtils.getSelectItems(SelectItemUtils.java:78)
     at oracle.adfinternal.view.faces.renderkit.rich.SimpleSelectOneChoiceRenderer.getSelectItems(SimpleSelectOneChoiceRenderer.java:98)
     at oracle.adfinternal.view.faces.renderkit.rich.SimpleSelectBaseRenderer._renderContent(SimpleSelectBaseRenderer.java:208)
     at oracle.adfinternal.view.faces.renderkit.rich.SimpleSelectBaseRenderer.renderElementContent(SimpleSelectBaseRenderer.java:122)
     at oracle.adfinternal.view.faces.renderkit.rich.FormInputRenderer.encodeAllAsElement(FormInputRenderer.java:152)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer.encodeCenterFacet(PanelStretchLayoutRenderer.java:769)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer._encodeCenterPane(PanelStretchLayoutRenderer.java:1140)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer._encodeMiddlePanes(PanelStretchLayoutRenderer.java:348)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer.encodeAll(PanelStretchLayoutRenderer.java:313)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
     at oracle.adf.view.rich.render.RichRenderer.encodeStretchedChild(RichRenderer.java:2004)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelSplitterRenderer._renderPane(PanelSplitterRenderer.java:1360)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelSplitterRenderer.encodeAll(PanelSplitterRenderer.java:279)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:421)my lov is empty,but where i restart Instance IntegratedWebLogicServer all is fine what cause this error
Edited by: adf009 on 2013/04/03 9:28 AM
Edited by: adf009 on 2013/04/03 1:13 PM

Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem

HT5312 how do i delete WRONG cloud ID from my ipod touch? it was typed WRONG and I cannot delete it because it does NOT exist and I don't know password for email accoutn that does not exist

how do i delete WRONG cloud ID from my ipod touch? it was typed WRONG and I cannot delete it because it does NOT exist and I don't know password for email accoutn that does not exist

someone please help, I can't even delete content because it prompts me for a password for an account that I mistyped - wth?????

TS1347 Since the most recent download from Apple my calendar will not accept a new entry. I turned the phone off, back on, and it would then accept a new entry. Then would stop again. Attempted the on-off fix and now that does not work.

Since update of iOS7.0.2 my calendar has been problematic by not accepting new data (appointments) intermitingly. The first time I turned off the phone and restarted which then accepted the new data for an event. Worked fine a few days the would not again accept new data. The on/off fix does not now work. Went online with Apple support, went through an online dianogistic which after the calendar function worked. Today it again will not take new data. One good thing is once the data is visible in Calendar it stays.

SharmFarm wrote:
Good ev Ning Mario49 firstly I would like to say a great thank you for your attention to trying to help me,,,,, i have looked at the links and will try everything stated first thing…
Hi Mario,,,,
I tried everything in your reply,,, thank you again,, I had done that once before and all was working great,,
I have just now tried the Reinstall via iTunes, about 20 into the download, the iTunes logo on the phone disappeared, and the Apple Logo appeared again,,, I waited until the iTunes stated that the download had finished, and the install was in progress,,,
Nothing happened, still the Apple Logo was visual on the screen, iTunes never recognised the phone which it was on my iTunes account previously,,,
Still just a bunch of lines, maybe 5 or 6 so small writing,, I personally can not read what it is telling me, someone said it reads, incorrect shutdown,,,????????
Please advise,???
I am now at a loss,,, I really became excited when I saw the iTunes icon after putting the phone into restore,,,???
Thank you again
D

HT204074 I have been reading about how to associate devices with my Apple ID, and the info says I can go to my account through iTunes to find "Manage Devices" but that does not exist. Either it was phased out our there are other ways to get there, but can

I am trying to find out about all my associated devices. I recently got a message that I had used my last device, and am not sure how this can be. The instructions for accessing the info via the iTunes account info page apparently were not shared with the programmers since there is no Manage Devices button or option as far as I can see. How do I do this?

After hours and hours of failed searches, I must have used a different keyword in my Google search, and here is the website that I was looking for:
https://supportprofile.apple.com
And here is the guy whose website I found that helped me solve my problem:
http://www.marcomc.com/2011/01/how-to-find-the-list-of-my-apple-registered-produ cts/
I was going to rant here about how badly Apple designed their "Apple Id" stuff, how they strongly distinguish between using your Apple Id at the online Apple Store vs. using it at the App Store (which you have to get to via iTunes ... quite ridiculous) ... but I won't. :-)
Anyway, I hope that the two previously mentioned websites will be of help to others.

Hi,i am trying to edit a BP and i get this error;An attempt was made to execute a dynamic method callon an initial(NULL-) object reference. The reference must refer to an object. what could be missing?

BP_....AccountActivitiesOV.htm....application BPBT.
what could be wrong? An attempt was made to execute a dynamic method callon an initial(NULL-) object reference. The reference must refer to an object???

Hi Dunamis,
Please check if below links can help you;
Error on execution of Web Interface
Help! I meet this Business Server Page (BSP) error CX_SY_REF_IS_INITIAL
Strange Error in Transformation of 2LiS_03_BF with 0IC_C03
Regards,
Kamfrk.

Help with Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.

This was all working yesterday, but this morning, I cannot run in the dev fabric, or even setting the website project as a startup project directly, I get the following error:
Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.BadImageFormatException: Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Assembly Load Trace: The following information can be helpful to determine why the assembly 'msshrtmi' could not be loaded.
=== Pre-bind state information ===
LOG: User = Andrew-VAIO\Andrew
LOG: DisplayName = msshrtmi
(Partial)
WRN: Partial binding information was supplied for an assembly:
WRN: Assembly Name: msshrtmi | Domain ID: 3
WRN: A partial bind occurs when only part of the assembly display name is provided.
WRN: This might result in the binder loading an incorrect assembly.
WRN: It is recommended to provide a fully specified textual identity for the assembly,
WRN: that consists of the simple name, version, culture, and public key token.
WRN: See whitepaper http://go.microsoft.com/fwlink/?LinkId=109270 for more information and common solutions to this issue.
LOG: Appbase = file:///C:/Users/Andrew/Desktop/Beko2011Azure/Website/
LOG: Initial PrivatePath = C:\Users\Andrew\Desktop\Beko2011Azure\Website\bin
Calling assembly : (Unknown).
===
LOG: This bind starts in default load context.
LOG: Using application configuration file: C:\Users\Andrew\Desktop\Beko2011Azure\Website\web.config
LOG: Using host configuration file:
LOG: Using machine configuration file from C:\Windows\Microsoft.NET\Framework\v4.0.30319\config\machine.config.
LOG: Policy not being applied to reference at this time (private, custom, partial, or location-based assembly bind).
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/Temporary ASP.NET Files/root/cb955b02/eef106e2/msshrtmi.DLL.
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/Temporary ASP.NET Files/root/cb955b02/eef106e2/msshrtmi/msshrtmi.DLL.
LOG: Attempting download of new URL file:///C:/Users/Andrew/Desktop/Beko2011Azure/Website/bin/msshrtmi.DLL.
ERR: Failed to complete setup of assembly (hr = 0x8007000b). Probing terminated.
Stack Trace:
[BadImageFormatException: Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.]
System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) +0
System.Reflection.RuntimeAssembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) +39
System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection, Boolean suppressSecurityChecks) +132
System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +144
System.Reflection.Assembly.Load(String assemblyString) +28
System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +46
[ConfigurationErrorsException: Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.]
System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +618
System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory() +209
System.Web.Configuration.CompilationSection.LoadAssembly(AssemblyInfo ai) +130
System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection compConfig) +178
System.Web.Compilation.BuildManager.GetPreStartInitMethodsFromReferencedAssemblies() +94
System.Web.Compilation.BuildManager.CallPreStartInitMethods() +332
System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters, PolicyLevel policyLevel, Exception appDomainCreationException) +677
[HttpException (0x80004005): Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.]
System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +9079228
System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +97
System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) +258
Note that the dev machine is x64 Win7.
I have not tried deploying this to staging since the issue started as I'm a bit nervous of touching the staging/live environment until this is solved.
Removing the PlatformTarget element from the project file has no effect
Removing the msshrtmi.dll file from the bin directory of the website project ends up with
'Could not load file or assembly 'Microsoft.WindowsFabric.Common, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified'
I have used Git to revert to the last working build to no effect (But I don't have the obj/bin folders in GIT), but it has atleast reset the project files etc.
If I return msshrtmi.dll to the bin folder and switch the model and website projects to x64 there is no change
If I switch both to x86 then I get an error Could not load file or assembly 'BekoModel2011' or one of its dependencies. An attempt was made to load a program with an incorrect format.
which is the model project - presumably because to run on my x64 machine I need the 64bit version?
I really need to be able to debug and then publish some changes ASAP.
Andrew

Hi,
Is it true that you're using IIS to host the application? Could you check whether the process is x64 or x86 one via task manager or config in IIS manager?
http://blogs.msdn.com/b/rakkimk/archive/2007/11/03/iis7-running-32-bit-and-64-bit-asp-net-versions-at-the-same-time-on-different-worker-processes.aspx
Allen Chen [MSFT]
MSDN Community Support | Feedback to us
Get or Request Code Sample from Microsoft
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Static analyzer fails on WIX custom install action project: .dll' could not be opened -- 'An attempt was made to load a program with an incorrect format'

On our build system, we use the global setting to code analyze all projects. One of our projects is a C# WIX custom action. This projects causes the build to fail with:
EACustomInstallActions.CA.dll' could not be opened -- 'An attempt was made to load a program with an incorrect format.
The ...CA.Dll target seems to be created by a WIX custom action. Does anybody have already encountered this issue and found a workaround?
Full build output:
<target name="ContractDeclarativeAssemblyCS" success="false">
              <message level="normal"><![CDATA[Build Declarative Contract Assembly for C# D:\EA_MAIN_DB\AMI\bin\Debug\GEHealthcare.Isip.EACustomInstallActions.dll]]></message>
              <message level="high"><![CDATA[C:\Windows\Microsoft.NET\Framework\v3.5\Csc.exe /noconfig /nowarn:1701,1702 /pdb:obj\x86\Debug\Decl\GEHealthcare.Isip.EACustomInstallActions.pdb /errorreport:prompt /warn:0 /define:DEBUG;TRACE;CONTRACTS_FULL;CODE_ANALYSIS /reference:"C:\Program Files\Windows Installer XML v3\SDK\Microsoft.Deployment.WindowsInstaller.dll" /reference:"C:\Program Files\Microsoft SQL Server\100\SDK\Assemblies\Microsoft.SqlServer.ConnectionInfo.dll" /reference:"C:\Program Files\Microsoft SQL Server\100\SDK\Assemblies\Microsoft.SqlServer.Management.Sdk.Sfc.dll" /reference:"C:\Program Files\Microsoft SQL Server\100\SDK\Assemblies\Microsoft.SqlServer.Smo.dll" /reference:"C:\Program Files\Microsoft SQL Server\100\SDK\Assemblies\Microsoft.SqlServer.SqlWmiManagement.dll" /reference:"C:\Program Files\Reference Assemblies\Microsoft\Framework\v3.5\System.Core.dll" /reference:"C:\Program Files\Reference Assemblies\Microsoft\Framework\v3.5\System.Data.DataSetExtensions.dll" /reference:C:\Windows\Microsoft.NET\Framework\v2.0.50727\System.Data.dll /reference:C:\Windows\Microsoft.NET\Framework\v2.0.50727\System.dll /reference:C:\Windows\Microsoft.NET\Framework\v2.0.50727\System.Drawing.dll /reference:C:\Windows\Microsoft.NET\Framework\v2.0.50727\System.Windows.Forms.dll /reference:C:\Windows\Microsoft.NET\Framework\v2.0.50727\System.Xml.dll /reference:"C:\Program Files\Reference Assemblies\Microsoft\Framework\v3.5\System.Xml.Linq.dll" /addmodule:D:\EA_MAIN_DB\AMI\src\radstore\Installer\EACustomInstallActions\obj\x86\Debug\GEHealthcare.Isip.EACustomInstallActions.CA.dll /debug+ /debug:full /filealign:512 /keyfile:..\..\Common\EAKeyPair.snk /optimize+ /out:obj\x86\Debug\Decl\GEHealthcare.Isip.EACustomInstallActions.dll /target:library /warnaserror- ..\..\Common\GlobalAssemblyInfo.cs CustomAction.cs Properties\AssemblyInfo.cs Resource1.Designer.cs SqlServersSelector.cs SqlServersSelector.designer.cs "C:\Program Files\Microsoft\Contracts\Languages\CSharp\ContractDeclarativeAssemblyAttribute.cs"]]></message>
              <error code="CS0009" file="CSC"><![CDATA[Metadata file 'd:\EA_Main_DB\AMI\src\radstore\Installer\EACustomInstallActions\obj\x86\Debug\GEHealthcare.Isip.EACustomInstallActions.CA.dll' could not be opened -- 'An attempt was made to load a program with an incorrect format. ']]></error>
            </target>

This problem appears to be ongoing 5 years after this thread was started. I have just run into it.
When WiX builds a custom action, the build proceeds as normal and produces a managed code output, say MyCustomActions.dll. Windows Installer doesn't support managed code in custom actions, so the managed code has to be wrapped in an unmanaged native code
wrapper, so in a post-build step, it injects the managed output into the unmanaged wrapper and _that_ then becomes the project's build output and will be named MyCustomActions.CA.dll. I believe that Code Contracts may be trying to open the unmanaged wrapper
file and discovering that it is not managed code ("invalid format").
In order for CCRewrite to work here, it would need to run on the managed code _before_ it gets wrapped in the unmanaged wrapper. I am not sure how we can hook into the build process to get that to happen.
It might be possible to somehow make a WiX Custom Action project by creating a standard C# class library, which would work correctly with CCRewrite, then somehow performing the WiX packaging as a post-build step. I'm not sure what is required though, exactly.
Any ideas?
--Tim Long
Tim Long

An attempt was made to access a socket in a way forbidden by its access permissions -- this.RaiseExceptionIfNecessary();

I'm relatively new to Azure websites...
Have made a website that uses a proxy web service to retrieve data from another web service. When I publish the website to my Azure website I get the following error:
An attempt was made to access a socket in a way forbidden by its access permissions 127.0.0.1:53775
public string Result {
Line 250: get {
Line 251: this.RaiseExceptionIfNecessary();
Line 252: return ((string)(this.results[0]));
Line 253: }
Probably a configuration issue, but I do not know what is missing. Have seen similar during my research for this but the issues have been more related to databases.
Can anyone help me here?

you cannot open new ports on the worker. Better reference the assembly that makes external call and use it directly instead using it as a proxy service
Galin Iliev [MCSD.NET, MCPD], http://www.galcho.com

An Attempt was made to reference a token that does not exist - SAPB1 8.8

Similar Messages

Maybe you are looking for