An attribute of the project was changed

I've upgraded labview from 8.2.1 to 8.5 and I have done the same with a project. Now, when I try and close the project it comes up the the Save Changes dialog even though I have not made any changes since saving under 8.5. I have tried a mass compile and that didn't solve the problem, it still thinks there is an attribute that has changed.
Please help.

To answer the earlier question of why the LabVIEW folder: What Does Mass Compile Do in LabVIEW? Basically, it relinks all subVIs to main VIs, checks for corruptions, as well as updates to the latest version.
Are you by chance using Teststand at all? If so, this may be related: Why Do My VIs Open with Asterisks After Being Mass Compiled in LabVIEW for TestStand?
Really, I imagine that one of the VIs in your project is still somehow not updating it's links to the new subVIs. Can you post one of the projects that is exhibiting this behavior?
One thing you may try is to save a copy of the entire project (one of the save as options) and see if the copy acts the same way.
David_B
Applications Engineer
National Instruments

Similar Messages

"Part of the project was not played" error

I just got a brand new iMac--double the number or processors and twice the RAM as the old one--and I keep getting this error in Garageband:
Part of the project was not played
This project has too many real instrument tracks to be played in real-time.
To optimize performance, see the 'Optimizing GarageBand performance' page in GarageBand Help.
This issue only rarely cropped up on my old machine, and it was usually because the computer was chugging away on too many projects at once. I am editing a podcast which has two (rather long) audio tracks.
I have quite all other applications.
I have fixed permissions.
I have tried from another user account.
I have deleted prefs files.
I have reinstalled Garageband.
Nothing is helping. This is very frustrating.
Any guidance you could give me would be EXTREMELY appreciated!
Thanks!
Evan

In my case, the culprit was backups and disk-related software eating large amounts of CPU.
I recently ran into this problem with a very small project. Even after locking all tracks, I could not record all the way through the project without getting "project not played".
One pattern I noticed was that I could never get through the whole project when Time Machine was backing up. So I turned off TM and tried again.
Even then, I couldn't get all the way through. Running Activity Monitor, I could see that WD's disk software (came with the My Book drive I use for backup), would periodically consume a big chunk of CPU, even though I wasn't using the WD disk... even if I dismounted the drive. So I uninstalled the WD software.
With this change, Activity Monitor shows ~0% CPU. TM can still give problems, so I shut it down when I record.
Now GB runs fine, even with multiple tracks unlocked.
Moral: use Activity Monitor to make sure something isn't chewing up too much CPU. It may be an intermittent load, which makes it harder to see. But a big burst in non-GB CPU activity can stop GB, even if the burst is brief.
~2010-vintage iMac, 8GB RAM, GB '11

I have two versions of Pr, one is the latest 2014 and when trying to open a Pr2014 session, I get an error message saying the project was saved in a newer version and cannot be opened. Help

I have two versions of Pr, one is the latest 2014 and when trying to open a Pr2014 session, I get an error message saying the project was saved in a newer version and cannot be opened. Could there be an issue with an older Pr application on the computer? Please help!

You need to be very careful which project you open in which version.
For 2014 make sure its on 2014.1 build 81.

Help! I just put a US sim card (i am from Canada) and got a monthly pre paid plan, and when I went to restore the iphone, it didn't work. I can't find backup that i did right before the sim was changed. I really need the info that was there! Please help..

Help! I just purchased a US sim card/monthly pre-paid plan (i am from Canada) as I am travelling in the states for a month, and when I went to restore the iphone, it didn't work. I can't find backup that i did right before the sim was changed. I really need the info that was there! Please help..

Hold on,
Have you talked to your carrier to confirm the unlock?
What was the procedure you did to unlock the phone?
Standard unlocking procedure once processed by the carrier:
Backup in iTunes
Erase the phone (ignore restore terminology here)
Plug the phone to the computer and then launch iTunes
Wait for unlock notification.
Restore the backup.

My apple ID was hacked. Trying to reset password but the email never reached my account. Trying to answer security questions, the birthday was changed. I am really miserable. Can anyone shed some light, please?

My gmail email is my apple ID. I found I lost access of gmail last night and I reset the password before bed. But this morning the password was changed again. My ipad also requested a password that didn't match to the one I used. I have reset my gmail once more. In addition, I added 2-step verification. But I have not received any new mail up to now. I tried to reset my apple ID. When I selected sending an email for resetting, the mail was sent but never reached my mailbox; When I selected answering security questions: the birthday was wrong. It's been changed. I am SO SO UPSET. Can any genius take pity on me and show me some guidance, please?

You should get Apple involved in sorting this out. Start at this site:
https://getsupport.apple.com/Issues.action
Your Apple ID can be handled through iTunes.

A friend's eMac was working fine until the name of the administrator was changed incorrectly in Systems Accounts

I am trying to fix a friend’s eMac. It was working fine until the name of the administrator was changed incorrectly in Systems Accounts. Upon restart the computer failed to mount. I tried to reinstall Tiger and could not. The destination to do this install could not be found. While in Disk Utilities I tried to repair and then zero out erase the hard drive, this also could not be successfully done. The hard drive was working perfectly before the name change. I may try to load Tiger from the eMac onto an external drive and then hope to erase the eMac internal drive.
Thank you for your thoughts on this as it would be a shame to retire this trusted computer.
Nick M.

Hello,
Thank you very much for your attention to this. Yesterday I was able to get the eMac to install Leopard onto an external drive. I had hoped that once done I would be able to initialize or erase the content of the internal drive in Disk Utility, but was not able to do so, I only received error messages telling me my request failed. This was also true when I tried to create partitions on it. So in effect, the computer runs, but only from the external drive. I could not even find the internal drive while running from the external drive. Where is it? And the internal drive only occasionally shows up in Disk Utility.
As for holding Option and Alt, the internal drive did not show up.
And Leopard was running on the eMac when I lost contact with it. Again, all failed when a name of the administrator was changed, but was not properly done. Or something like this.
Is there anyway I can use Terminal to help reach the internal drive?
I realize I am asking a lot of questions.
And I thank you for your time,
Nick M.

The project was saved in a newer version of Premiere Pro and cannot be opened in this version

I edited a project on CC on one computer and saved it on my external. My friend took the same project to edit it on her computer under her own name and licence. Both of us recently upgraded to CC. But the same project that worked a few hours back on Premiere Pro CC, does not work now also on Premiere Pro CC and I received a message saying: The project was saved in a newer version of premiere pro and cannot be opened in this version." Can you please help us.?
Message was edited by: Kevin Monahan
Reason: Your title was too long.

Hi alexxxkid,
You should be able to import the xml into an earlier version.
Backward compatibility has never been there with Premiere and it is always recommended not to update in the middle of a project.
As far as the crash is concerned, please tell me more about it so that i can help you to the best of my knowledge.
Thanks,
Rameez

"The project has changed - do you want to save changes?"

This is more or less a meaningless warning in Adobe Captivate 5. if I OPEN a project and close it immediately I get this warning: the project has changed. But that is not correct, I didn't touch a single slide, I simply open the file and look at it, then click on the Close button.
If I save the project, then chose Export Captions, I get this warning as well. How can exporting captions count as a change to the project?

Hello,
It is just my intuition: thinking that the cache is updated whenever you open the project, so perhaps this is the reason?
Lilybiri

Topink 9.0.4 not generating an update statement, if the object was changed.

I have 2 tables T_Objects and T_Categories.
T_Objects stores images as a BLOB field. T_Categories stores the details of an article category and references the pictogram in T_Objects via a FK.
I have 2 webpages. One which is used to load the pictogram in T_Objects and the other which is used to maintain details of the category in T_Categories. As soon as the image is uploaded and is displayed on the screen, user fills in the category details and saves them.
Each of these operations is performed in a seperate HTTP Request (and consequently seperate UOW). The idea is that the user first uploads an image, checks the image on the screen and the decides to associate it with a category.
The database is Oracle 9i. Driver used is OCI 8. Binary Steam Binding is enabled for BLOB fields. DatabasePlatform is Oracle9Platform.
The descriptors of both the tables use SoftCacheWeakIdentity and the cache size is 100. Both tables use Optimistic Locking based on a version field using TimestampLockingPolicy.
Coming to the problem, if the delay between the upload of the image and saving of the category details is large (say 20 seconds or so) Toplink generates a Update query to update the details in T_Categories. If the delay is smaller than that then Toplink fails to generate an update query even if the object was changed. Upon debugging I find that just before the commit, the BO being committed has all the correct details including the new PK of the uploaded image.
Assuming that the BO pointing to T_Objects may not be in Cache (owing to images of size 200+ KB) I did an explicit read of this object before attempting to save details to T_Categories. Even that does not seem to help.
Any ideas on what is happening here?

Chris. Thanks for your reply. I did not get your point. However these are the steps being done.
Can you please go through the code and check what could be wrong?
Steps
1) createContent(VmTObjectsVO vo) is called to insert into VM_T_OBJECTS.
This internally calls create ( Object obj, UnitOfWork uow, boolean commitChanges )
2) update( VmSubcategoriesVO vo ) is called to update a sub-category details to VM_T_SUBCATEGORIES.
This internally calls save( Object bo, UnitOfWork uow, boolean commitChanges )
In the save method at the time of uow.commitAndResume() no update statement is getting generated.
These core methods are used for almost all tables in the application and all of them work.
It is only in this use case I have a problem.
* Creates a new entry for storing the image/document in VM_T_OBJECTS.
* @param vo the content to be stored.
* @return the sequence assigned to this object.
public Long createContent(VmTObjectsVO vo){
VmTObjectsVO voSaved = null;
Long lnContentId = null;
if(vo != null){
VmTObjectsBO bo = new VmTObjectsBO();
/* copy the properties from the VO to the BO. */
ObjectAssembler.vo2bo((BaseVO)vo, bo);
/* Create the content */
lnContentId = create(bo);
return lnContentId;
* updates a subcategory to VM_T_SUBCATEGORIES
* @param vo VmSubcategoriesVO to update.
* @ return updated VmSubcategoriesVO
public VmSubcategoriesVO update( VmSubcategoriesVO vo ) {
VmSubcategoriesBO boSaved = null;
VmSubcategoriesVO voSaved = null;
VmSubcategoriesBO bo = new VmSubcategoriesBO( );
/* Copy the properties in the VO to the BO */
ObjectAssembler.vo2bo( vo, bo );
/* Save the changed object */
save( bo );
return voSaved;
* Stores the new object in the database and
* returns the primary key identifier with which it was created.
* @param obj The object to be created.
* @param uow Use this unit of work for performing the insert.
* @param commitChanges Should commit changes upon insertion?
* If the client wants to perform the commit operation across several others
* operations, then the value should be set to false.
* @return Primary key of the object created.
public Long create ( Object obj, UnitOfWork uow, boolean commitChanges ) {
Object cacheObj = null;
Long lnSequenceAssigned = null;
if ( obj == null ) {
throw new ObjectNotFoundException( null, null, null, null );
try {
if (uow == null) {
/* create a new unit of work if necesasry */
uow = getUnitOfWork( dbSession );
/* Assign a sequence number */
uow.assignSequenceNumber( obj );
/* Get the descriptor associated with this object */
Descriptor descriptor = uow.getDescriptor(obj);
/* Get the sequence assigned */
lnSequenceAssigned = (Long)descriptor.getObjectBuilder().getBaseValueForField(descriptor.getSequenceNumberField(),obj);
/* Register the object */
uow.registerObject( obj );
if(commitChanges){
/* Commit the changes */
uow.commitAndResume();
} finally {
return lnSequenceAssigned;
* Saves changes to an existing object to the data store.
* Has only been tested for flat-objects. Objects that reference other
* persistent objects have not been tested.
* @param bo The object to be saved.
* @param uow The UnitOfWork to use for saving the object.
* @param commitChanges whether the changes should be committed.
* If the client wants to perform the commit operation across several others
* operations, then the value should be set to false.
public void save( Object bo, UnitOfWork uow, boolean commitChanges ) {
if ( bo == null ){
throw new IllegalArgumentException(
"Object is invalid" );
try {
/* Register the object supposed to be existing */
Object clone = uow.registerExistingObject( bo );
/* This object does not exist */
if ( clone == null ) {
throw new ObjectNotFoundException( "object not found", "dao", bo.getClass().getName(), bo.toString());
/* Copy the properties from the object to the clone, to ensure that
* the intended properties have not been overwritten in the object from
* the cache
ObjectAssembler.copy( bo, clone );
/* Commit the changes. */
if(commitChanges){
uow.commitAndResume();
} finally {
dbSession.release( );
}

The project was not built since its build path is incomplete

Hi, Recently I port my project fro bea 8.1 to 10.2 & I am ubale to find following packages... workspace studio alos not able to find teh librraies contabing those files.
The project was not built since its build path is incomplete. Cannot find the class file for weblogic.management.ManagementException. Fix the build path then try building this project
The project was not built since its build path is incomplete. Cannot find the class file for weblogic.security.service.ResourceBase. Fix the build path then try building this project
com.bea.p13n.mbeans.MailServiceMBean
-KASH

It seems this occurs since the required jar files for building the files is not available in the IDE build path.
The build classpath is the path which is used to find classes that are referenced by your source code. During compilation, this path is used to search for classes outside of your project. As you know th build classpath can be specified for each project. In the project properties, it is referred to as the "Java Build Path Adding a JAR file to the build path : You can add a JAR file stored either in the workbench or anywhere in your file system to the build class path. To add a JAR to your build class path follow these steps: 1>>Select the project, and from its pop-up menu, select Properties. In the Properties dialog,select the Java Build Path page. 2>>Click the Libraries tab. You can now either add a JAR file which is contained in your workspace or which is somewhere else: to add a JAR file which is inside your workspace click the Add JARs button to add an external JAR file click the Add External JARs button.

The project was not built since its classpath is incomplete.

Dear Experts,
I am getting the following error in NWDS,
The project was not built since its classpath is incomplete. Cannot find the class file for java.lang.Object. Fix the classpath then try rebuilding this project.
Please Suggest
Warm Regards,
Upendra Agrawal

Hi
Close the project in nwds, close nwds and open again.
Now try to open project again.
Else
Take back copy of project from workspace, delete the project from nwds completely
Close nwds and open again
Again import the back up copy

"The project was saved in a newer version of premiere pro and cannot be opened in this version." - Except it wasn't!

Last night I saved a project I've been working on for a couple of days. It's been fine all along. Today, when I went to open it, it's no longer listed in the recently opened files on startup and i get this message:
"The project was saved in a newer version of premiere pro and cannot be opened in this version."
Except it wasn't! I use Premiere CC and it's been fine all along. I can no longer open it at all...
Any thoughts? Very frustrating!

One more item. In using PP CC2014 for the first time with this project, I have run into multiple issues making this project very frustrating. When adding a sequence to the master sequence, I have to render the audio each time in order to see all of the audio waves. You have to keep doing this over and over, even though you've already rendered a sequence already.
I am getting error messages when rendering the project saying there are issues compiling the movie. Getting same type error message if I try to export. I narrowed it down to two sequences keeping the program from rendering without the error messages. They each had a tiff file. I deleted them and they rendered. Not sure what this issue was with these particular files since I have other tiff files in the project. Once the rendering of all sequences was done, all the individual sequences were closed and the master was the only one open. I didn't close them. So now to edit any of the sequences I have to go back and open them.
The only thing this project has in it are titles created in PP, a few graphics, mostly tiff tiles and some jpeg and the dissolve effect. That's it. Seems like they should have done more with this version before putting it out there. Maybe that's why there are two separate applications for PP? Who knows. I will be uninstalling PP CC2014 when this project is complete.

I am trying to open a previous completed project made on premiere pro CC 2014. i am getting a message that says the project was made on a newer version and cannot be opened on my new computer. However i made the older project on the same premiere pro CC 2

I am trying to open a preciously completed project mad eon premiere pro CC 2014. I purchased a new computer and downloaded the same premiere pro cc 2014. However when i try to open my old project it says the project was made on a newer version and cannot open.
that makes no sense...i downloaded the same version of premiere pro CC...help please!

Hi,
Seems that you don't have the most recent version installed right now. After launching Premiere Pro go to Help > Updates and check if any updates are available.
Thanks,
Rameez

I want the system automatic update my UDFs when the OnHand was changed.

I added two UDFs in table OITW to count the warehouse OnHand by CASES and Bottles. I want the system automatic update my UDFs when the OnHand was changed. Is there any way I can do it in database level instead in the application (too much places involved).

There is few ways how to do this:
- triger as David said, but I dont recomend it through SAP policy
- in stored procedure transaction notification by adding or updating document update your user field
- create job in SQL server which in specific interval recalculate the changes of onhand and update your user defined field
- create addon which will be over functiuonalities which may change the onhand value
I think that from SAP is possible only Addon, but the easist way is trigger and if you dont need it just in time but for example every 10 seccond, the better is job which cannot fail the standard SBO transaction (triger may and may be unsafe).
Hope it helps
Petr

I have iMove 11 and photos turn very dark when I drag them into the project. Changing colour white balance does not fix the problem.

I have iMove 11 and photos turn very dark when I drag them into the project. Changing colour white balance does not fix the problem.

Thanks for your no help line.

An attribute of the project was changed

Similar Messages

Maybe you are looking for