An audio problem and a video problem

1. I'm a total novice about audio filters. Which filder would be best to take out wind noise? I used a rabbit fur baffle but still got a bit of wind noise. It cannot be reshot.
2. Sometimes when I try to put a transition between two clips it seems to slip under the timeline. How can I avoid this and get the transition to center on the edit.
Thanks for your help.

1. SoundTrack Pro might be the best tool for this unless you have a more sophisticated audio program installed. Essentially, you'll need to sample just the wind noise then use the sample to filter the rest of the clip.
If the wind noise is just low end rumble, one of the EQ filters may do it without leaving FCP. You'll need to play around with the settings to find what works in your situation. The main problem with wind and air noise though is that it often covers must of the audible spectrum, so any filtering you do can/will also effect the part of the sound you wanted to keep.
2. Sounds like a "handle" issue. Make sure your clips have enough frames before the IN point and after the OUT point to support the duration of the transition you're using.
-DH

Similar Messages

Hp slate 6 heating problem, network connectivity problem and now camera problem

Hello, I have using this tablet since last 4 month and after upgrading to kitkat there is phone heating problem and network connectivity problem getting started some time it will show network but during that we can not receiving or calling through it and even after put in flite mode it will not resume so have to restart several time. Now about 4 days ago kernal updating automaticaly in my phone so i happy that may shortout the all problems but rather than it will added one more problem which related to camera while goes in setting of camera it will automatically closed. Have you tested this tablet or not ???? and why from your site any actions has been taken ???Why there is no Solutions are given from your site????

Hello Rohit,Can you check if you updated to the latest version?Here is the link: (you can choose the latest version to download and update it by SD card)- base on your regionhttp://support.hp.com/us-en/drivers/selfservice/HP-Slate-6-VoiceTab/6818329/model/7386537

Internet access problems and viewing video on internet

I have very limited interet access most of the time. I get a message: "You are not currently in an area that can handle data communication. ..." I have no problem with email and other features of the phone during this time. The signal at the top of my phone says "GSM". When I am able access the internet, it give me a different signal (can't remember what that is, however). Even then, I cannot view most video clips, such as YouTube clips. They will not load all the way. It states, "Error has occurred in attempting to play media." Help!

I have unlimited internet access, so that's not the problem. Right when I got the phone, I replaced the original data card with a 4G card and enabled mass storage. I have (since my first post) had more access capability by enabling the WiFi (da) which finds my wireless connection at home. I've also been able to view a video clip, not successfully all the way through, however. During viewing, the phone appears to crash, i.e. the screen goes white and then it takes 3-5 minutes for it to reboot. This has also happened when the phone has not even been being used. Also, as I was surfing the net, the phone asked if I wanted to enable Javascript which I did. Is there anything else that I need to enable or do to the phone in order to have a more pleasant experience using the internet and viewing video clips?

Nikon P510 and PSE5 video problem

I recently purchased Nikon p510 and never once thought of checking here to see if the pictures and video would download properly into my PSE5. The pictures seem to download without any problems but the video has issues when you play the video with PSE5. It downloads fine but playback skips and is blurred. If you watch the video on the camera itself it looks fine but downloaded into PSE5 is not working correct.
I called Nikon and they told me that I have to use their software View NX2. What suggestions do you have other than using Nikon software?
My computer is Windows XP.

Yes. There are some good deals during the holidays and the combo is great value for money.
If you prefer you can download the free trials for 30 days and then validate with the serial numbers from the disk packaging. No further installation is required. So it's a good way of checking system compatibility before you buy.

CPU usage and Choppy Video problems on iTunes 8.0.0.35

Hello peoples,
I am having major issues with iTunes 8, I have choppy video playback and CPU usage problems. I am running Windows Vista Ultimate SP1
While wtching a TV show (specifically House Season 1 not HD) I get choppy video and my iTunes CPU usage shows 55-90% with an Intel Centrino Duo 2.16GHz processor this is ridiculous
my computer is only 2 years old, and when running iTunes 7 I had none of these problems
any help on how to fix this is much appreciated
Message was edited by: Goldman60
Message was edited by: Goldman60

Hello Laura&Graeme, Welcome to Discussions.
First off great job with what you have done. I have some suggestions below. One which you have done but want to ensure you know the full list of apple programs that may actually be in your system. So you can remove them all. Below is the first link to assist you as well as a text list of those Apps.
Removing iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
-Apple Mobile Device Support
-Apple Software Update
-Bonjour
-Windows iPod Updater (Name might be different but look for anything with the word iPod)
-MobileME Control Panel
-Quicktime
-iTunes
*Download and reinstall iTunes
http://www.apple.com/itunes/download/
*If the above does not assist then proceed below to the more advanced cleanup.
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926?viewlocale=en_US
also
iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/TS1421

MSI P35 Neo2-FR S3/USB Problems & Remote Desktop Video Problem

I recently received a new board back from RMA (my old one wouldn't post at all) and decided to re-install Windows XP back on it after verifying that it was working, and now I'm having a few issues with the board that were fine and working with the old board.
Firstly, I used to wake the system up from sleep using my USB keyboard when hitting "enter". Now it won't wake up with usb, and occasionally when waking it up with the power button, either my mouse or keyboard will not respond (both are USB). I then need to put the system back to sleep using the power button (I have xp set to sleep when pushed) and wake it up again to get the USB devices working. I have re-installed Windows XP, changed the ACPI BIOS settings to wake up using all devices, enabled/disabled legacy USB, downgraded the BIOS to 1.8 which I was running on my old board, and tried every USB slot on the board, all while running the exact same hardware that was on my previous board. Any help?
Secondly, I have the board/windows set to wake from S3 when attempting to reach it remotely. I can login fine, but when I get home to check the system, the screen is black. It's still running, and I can reach it again through RDC, but I can't seem to wake it up locally. The only way to correct the screen is by hitting the power button to put it to sleep, and then hitting it again to get it out of S3. This seems like a videocard issue, and I have tried using older versions of the nvidia driver but I always seem to have the same problem. Oddly, when I run tests at home using my laptop everything is fine and the video is displayed after logging off, but it seems to only be happening when I'm using it from my work computer. I would need to run some more tests to verify this though, and I assume that after some time using my laptop it would do the same thing. (the tests were run going outside of the lan and coming back in, from an S3 state). Video card drivers I tried were, 178.24 (oct. 15th), 178.13 (sep. 25th), 175.16 (may 13th).
Any help would be greatly appreciated. Thank you.
kk
MSI Neo2-FR (BIOS 1.9 & 1.8)
Core2Quad Q6600
Geforce 8800GT
Mushkin 2x1GB 9200 (running at 1066)
Antec Neo HE 550 watt PS
Windows XP Pro SP3

Thanks for the reply kourosh. I have used both the 1.9 (latest) and downgraded to the 1.8 BIOS that I was using on the board pre-RMA as stated in my initial post. It just doesn't make sense that I had everything working properly with the old board, and with the new board that I received back from MSI, things just don't work. I'm using the exact same hardware and have done multiple re-installs with different drivers etc.
I doubt that part two is a networking problem as I stated in my initial post that I'm testing by going outside of the LAN and coming back in from outside. I think it has more to do with waking it up remotely multiple times (eg. wake up remotely-->sleep-->wake up again-->sleep again-->possible black screen error), but I haven't had the time to do all of the testing.
I just find it strange that these things are not working as they were, and I'm beginning to blame the board again as I know how they SHOULD be working on the same exact board.
Anyway... thanks again for the reply.
kk

TA44469 i have a video that plays on my iphone, but when downloaded to windows, only the audio plays and the video is black. help,

i have an iphone 4s. I can take a video and play it on the 4s just fine, i have always been able to down'load to my pc and view videos with no trouble. But since mid-october 2012, when i download the video to my pc, and try to play it, same as always, I am getting only audio and the video part is black. I can hear everything happening, but no picture. any thoughts?

Try updating to QuickTime 7.7.3. (That has helped a few people who were getting that when trying to play the videos with version 7.7.2.)

Start up problems and shutting down problems

i have an hp pavilion all in one desk top computer and i'm having problems with the start up, sometimes when i turn it on i get as far as typing in my password and then the screen goes blank and i have to shut it off manually and turn it back on, but when i do it says failure to configure windows updates and reverting changes, and when i go to shut it down it shuts down but stays running so i have to start it again wait to put my password in then i can get it to shut down but yesterday when i went to shut it down i went to settings and clicked shut down and it wouldn't do anything so i manually shut it off and turned it back on , can anyone tell me what is causing these problems and how i can fix it.

Hello again octopus78,
Based on the information you have given me, I would suggest following this document on when the Screen is Blank after Starting the Computer.
If the issue persists I suggest creating a backup by following this document on Backing Up Your Files (Windows 8). The next step will be to recover your Operating System by Performing an HP System Recovery (Windows 8).
If the issue continues after this point, please call our technical support at 1-800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region.
http://www.hp.com/cgi-bin/hpsupport/index.pl
I hope this helps!
Cheers
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Problem with mac os x lion audio mute and web video playback

I have a 15" MacBook Pro I7
Strangest thing started happening ever since I installed Adobe Masters Collection Trial Version CS6.
Randomly, and I can pinpoint exactly when, all of a sudden I will loose my sound. The muting goes off and I can't get it back on again no matter what I try. Then I loose web-video playback. Nothing will playback beyond 11 seconds. I followed all the support community advice on how to handle this situation with no luck. Resetting the SCM does nothing. The ONLY way I can fix it is with a re-install of Mac OS X Lion! I've reinstalled twice (fixed the problem both times) but the problem just keeps coming back.
I'm guessing it's a software issue of somesort but I'm not exactly sure what the problem is or how to fix it. Any advice?

Slight Update. I found a guy with my EXACT problem here. https://discussions.apple.com/thread/4103108?start=0&tstart=0 Go to this discussion for further details.

N80 and Serious Video problems

I am so not impressed with the Nokia N80 Video Function.
I am having major problems in playing 95% of my videos from my old K750 which plays them with out problems.
Real player opens. Then stops for s few seconds starts again plays about 4 seconds, stops and starts again.
It doesnt matter much on the videos.
Its like the phone cant handle them or real player has a major problem.
The 4 second dealy or the major problems is when i use the memory card.
The phone still cant handle the video correctly when on the phone memory, The video stutters, Musics goes of and on.
This is such a let down in other wise a great phone.
I just cant beleive that my K700, K750 and K600 can play all the vids with out probs.
Any one else ?Message Edited by darrengf on 09-May-2006
08:03 PM

Yes same here.
The stutters are dreadful and sound keeps going of and on.
This is a Smart phone, But so far my K700 which is over 2 years old is smarter.
I just dont understand why, Nokia if you are reading this then please fix in your next firmware, Real Player is either Rubbish or the phone some how cant transfer the data / details over fast enough.
On some occasions opening up a video can take the phone over a 1min which i then think the phone has crashed.
Its like my computer when running more than 1 programme at a time, They start to stutter.

Sunpci3 card and XP video problems

I recently installed three pci3 boards into three sparc 150 machines. After install of the software and install of XP professional I encountered a problem. When XP loads, the desktop background (grassy hills) appears, but you can't see anything else. Everything is there because if you know where to click you can do so and see the hourglass appear and the screen do something, BUT the only thing that will ever be visible in the pci3 window itself will be the background. Basically I can't see anything but the background. If I start XP in safe mode OR if I start it in VGA mode, I can see and do everything. In safe mode, it looks normal, it's just slow. In VGA mode, the screen actually looks funny (like VGA), but I can't control the mouse at that point. I even installed more RAM in the system to bring me to 1Gig thinking that would work, but no such luck.
Does anyone have any ideas or suggestions? I am at a loss and don't want to have to purchase $2500 in KVM switches. Thanks in advance.

Yes same here.
The stutters are dreadful and sound keeps going of and on.
This is a Smart phone, But so far my K700 which is over 2 years old is smarter.
I just dont understand why, Nokia if you are reading this then please fix in your next firmware, Real Player is either Rubbish or the phone some how cant transfer the data / details over fast enough.
On some occasions opening up a video can take the phone over a 1min which i then think the phone has crashed.
Its like my computer when running more than 1 programme at a time, They start to stutter.

MSI HD 6870 Twin Frozr II and Streaming Video problem

Card doesn't like ESPN3.com (using IE8 browser). Video while watching Sports on ESPN3 will become distorted, change colors, background shadows, horizontal lines, turn Green (like Monochrome) or washed out.
Sometimes fixing itself and appearance is Normal. Eventually every 3 to 5 minutes, sometimes a bit longer, will get this Windows Message.
"Internet Explorer has stopped working" " A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.(close program).
" This Tab has been recovered " which IE8 will Refresh and work.
Does not matter what AMD/ATI Driver I am using 8.796 from MSI website or 8.801 from AMD. (Both are most recent).
Have used various resolutions provided from various forums (MSI, Guru3D, TechPowerUp, AnandTech). Uninstalling Drivers, Driver Sweeper, Ccleaner, deleting folders, going to Safe Mode, etc:.
Microsoft has had me Disabling Add-Ons, defaulting everything under IE Tools, Uninstalling IE8 and also their Fix-It program.
So far only time I do not have this problem is when I am using Windows Standard VGA driver.
This indicates that it must be a AMD/ATI Driver issue. So far only occurs on ESPN3.com (was ESPN360.com) when watchin a game -streaming video as aware of pertaining to my usage.
The HD 6870 operates fine for most part,
Other Issues: whenever I want to run 3DMark 2011 or Unigine Heaven 2.1 Benchmarks after restarting or Boot up of computer I have to reinstall Driver.
Reason: the programs says I do not have DirectX 11 compatible Hardware, therefore once I reinstall the Driver then the program identifies the card properly.
Other, sometimes running IE8 when I move the Mouse or Scoll the Screen will Flicker this happens with Driver 8.801 but not all the time.
As mentioned conflict between Driver and IE8. (can Microsoft and AMD ever work together or are they enemies, guess MS loves nVidia)

Using a different Browser.. well I have a few years back... don't know exactly why I keep returning to IE. Guess it has to do more with Visual Appearance and not having as many Gizmos
so IE is simple even with its Flaws. But thanks for suggesting it.
I used my old PC, Compaq Presario 5423US uses WinXP Pro 32bit, that I gave to my daughter when I built this one in May 2008 (I use Vista Ultimate 64bit).
I didn't realize it has the same problem when watching sports on ESPN3.com. (IE has stopped working-message only..... not all the whacky video scenarios).
I checked and my daughter did update hers to IE8. ( I always liked IE7 better but MS makes it hard as with all those Hot Fixes and SP2, SP3. etc.
So the whole problem is MS Internet Explorer 8 hates how ESPN3.com sets up their webpage .... just saying a Bug is created in the Data Packages set via Streaming Video.
If ya have a friend or capability to do so..try IE8 and watch a game on ESPN3.com until you get "Internet Explorerer has stopped working".
If it happens then there are issues with IE8 that needs to be resolved with that website (ESPN3.com).
anyways on my old PC there was no flickering and graphic distortions as mentioned with this PC.
Thanks!

Display and/or video problems

My daughter has a G3 b/w running OS 10.2. The problem is that her monitor (Sony Trinitron Multiscan 17fs II) won't display at 800x600 - only 480x640...the monitor is connected via a PC to Mac adapter.
Is this a monitor issue or a video card issue? She can't run her newer software games.
Thank you for the info!!!
Kelly

It is neither. It is an adapter issue, presuming that display is inherently capable of the resolutions you crave.
There is only one way to hook up the Red, Green, Blue, HSync, and VSync that works. If you get a picture on the display, that part is working.
The Mac reads several pins reserved for monitor ID from the adapter to decide what your monitor can do without damage. If you use an inappropriate adapter, your resolutions will be limited to avoid damaging your monitor.
When used with the Blue & White G3, a PC-to-Mac adapter may only give you the most basic VGA capabilities. Where did you get this adapter? what does the Vendor think its capabilities are? Are there any tiny switches on it?

My 2011 MacBook Pro does not start and stop after the apple appear, they said that the problem is a video problem and need to change the logic board. Cost almost same to buy a new one. Somebody have the same problem?

I have a MacBook Pro early 2011. Does not start. After the apple show, a blank screen appear. The service said that the problem is with the video plaquue in the logic board. Need to change. Cost lmmost the same than a new MacBook Pro. Somebody has the same problem? What we can do?

I hate to break this to you, but life isn't fair. If your job is that critically in need of a computer, then you should have a spare to use for just this kind of situation or have your employer provide you with a computer to use.
Computers break down, just like cars. If your car breaks down do you curse the car maker or get it fixed? Surely, you paid more for your car than the computer.
This is reality. Best get used to it because it won't get any better.

How to Create an Epic Rap Battle of History in After Effects (Compositing, VFX, Green Screen, Audio), or Fix Audio, Speed, and Real Time Problems

Hello. As a film project, I am creating an "Epic Rap Battle of History", a parody video of a popular series on YouTube. In my film/video, I would like to use compositing so that there will be two of one character in one shot. I have used Premiere Pro CC for the main character sequences, but when I imported this project in After Effects, there was no audio at all from the song, and the canvas displaying the composition was moving very slowly, at about 50% of the video's actual speed. Also, in the top right corner, it says, "Not Real Time", and displays something like 7.39/29.96. I have looked at different web pages, and nothing seems to work.
I would appreciate it if someone could explain how to fix this all up for me, or especially if someone who has had experience creating an Epic Rap Battle could actually list a step-by-step process on how to create one.
If this helps, I am a beginner to Adobe, and work on a iMac tower. Thank you for your feedback.

Start here to learn After Effects: http://adobe.ly/AE_basics

An audio problem and a video problem

Similar Messages

Maybe you are looking for