"An error (1502) occurred during the action Open." when opening original .VSD files, but NOT copies!?

We have a weird situation we're trying to troubleshoot for quite a while: We have multiple .vsd files stored on our network in DFS shares.. We have multiple users who cannot open the files, when they try by navigating to the file and double-clicking it,
they get "An error (1502) occurred during the action Open. File not found"
However, if they copy and paste the file to the same exact network folder, THAT file they can open with no problem!
The problem is very bizarre. I've checked obvious things such as file/folder permissions, versions of Visio installed, things in common between people who can and can't open the files.. I even did some testing today with some strange results...
Windows 7 x64 machine with Visio 2010 Pro installed (x86):
1. Opened file by double-clicking it in explorer, "Got the 1502 error"
2. Tried it again, this time I just get "File not found"
3. Opened Vizio, did a File --> Open --> navigated to the file and opened it that way... 1502 error.
4. Copy/pasted the file into the same folder where it's stored, then double-clicked the copy and it opens fine.
5. Closed the copy, tried to open the original, still get file not found / error 1502.
The file does exist, it IS there.. sometimes the user just copies it to their local desktop (well, it's not really local, it's redirected) and it opens fine there.. other users email themselves a copy of the file and then open it that way.. it works for
some, not for others.. and there's no discernible pattern yet to identify who this is affecting. Anyone have any ideas?
-Keith
-Keith Elkin

Hi,
Based on the error message, the issue may be caused by the Visio file is occupied by some other program in DFS.
>>4. Copy/pasted the file into the same folder where it's stored, then double-clicked the copy and it opens fine.<< If you did this step, the Visio file would rename in the same folder, like file1.vsd. Thus, it opened well.
Thus, I recommend you check the file's status in computer management in DFS server, see the below image:
If the affected Visio files were occupied, please try to clean them(right click>close the file) to test.
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Sorry,
This didn't help, the files are not open, locked open, and the issue still persists. Any other suggestions?
-Keith
-Keith Elkin

Similar Messages

  • An error occurred during the Lync meeting when open meeting the first time.

    Hello Lync specialists out there! We are running a Lync 2013 standard server in our company together with edge server and reverse proxy for external access. We haven’t taken Lync meetings, because of missing licenses, official in use but
    while testing I’m experiencing already a problem. When I schedule a meeting in Outlook and the click the link the Lync 2013 opens a window and wants to connect me to the meeting. Anyways after some period of time I get a message saying: “An error occurred
    during the Lync meeting.” Then when I close this window and click the link again in Outlook it works like a charm right away. Is there anything I can do that this will work from the beginning? Also when I then try to open this meeting room several times it
    works but e.g. on the next day or after some hours I’ve the same problem again.
    Thanks for your great input already.
    Regards
    Robert

    Hello,
    thanks to Adrian first for informing about the September update. Quite strange that they have released two updates in such a short period of time. The last one was January 2014 and then August and September. Luckily we have just a small
    environment and the update is not a big issue.
    The update is now installed and I would have to monitor the situation the next days.
    Holger which settings I should enable in the meeting policy? We have two policies for conferencing at the moment. First one (default) for all users which disables conferencing as we have only standard licenses for them and a policy with
    enabled conferencing for users with enterprise CALs. The conferencing policy for enterprise users looks like that for us:
    Identity                                 
    : Tag:Conferencing
    AllowIPAudio                             
    : True
    AllowIPVideo                             
    : True
    AllowMultiView                           
    : True
    Description                              
    AllowParticipantControl                  
    : True
    AllowAnnotations                         
    : True
    DisablePowerPointAnnotations             
    : False
    AllowUserToScheduleMeetingsWithAppSharing : True
    AllowNonEnterpriseVoiceUsersToDialOut    
    : False
    AllowAnonymousUsersToDialOut             
    : False
    AllowAnonymousParticipantsInMeetings     
    : True
    AllowExternalUsersToSaveContent          
    : True
    AllowExternalUserControl                 
    : False
    AllowExternalUsersToRecordMeeting        
    : False
    AllowPolls      
                             : True
    AllowSharedNotes                         
    : True
    AllowQandA                               
    : True
    AllowOfficeContent                       
    : True
    EnableDialInConferencing                 
    : True
    EnableAppDesktopSharing    
                  : Desktop
    AllowConferenceRecording                 
    : False
    EnableP2PRecording                       
    : False
    EnableFileTransfer                       
    : True
    EnableP2PFileTransfer                    
    : True
    EnableP2PVideo                   
            : True
    AllowLargeMeetings                       
    : False
    EnableOnlineMeetingPromptForLyncResources : False
    EnableDataCollaboration                  
    : True
    MaxVideoConferenceResolution             
    : VGA
    MaxMeetingSize                           
    : 250
    AudioBitRateKb                           
    : 200
    VideoBitRateKb                           
    : 50000
    AppSharingBitRateKb                      
    : 50000
    FileTransferBitRateKb                    
    : 50000
    TotalReceiveVideoBitRateKb               
    : 50000
    EnableMultiViewJoin                      
    : True
    Regards
    Robert

  • An error has occurred during the execution of the JSPM_MAIN phase.

    Hi,
    When I run the go.bat for running SLD, I am getting the following exception.
    An error has occurred during the execution of the JSPM_MAIN phase.
    Cannot initialize application data. Could not determine profile parameters. Error while retrieving value j2ee/dbhost,j2ee/dbname,j2ee/dbtype, with retriever com.sap.sdt.tools.sysinfo.ProfileDataRetriever. Could not extract value with key j2ee/dbhost,j2ee/dbname,j2ee/dbtype, from file D:/usr/sap/CE1/SYS/profile/DEFAULT.PFL. A possible reason could be that the path to the directory containing the sappfpar executable is not included in the PATH environment variable. Could not start process sappfpar. Error while executing process sappfpar. java.io.IOException: CreateProcess: sappfpar all pf=D:/usr/sap/CE1/SYS/profile/DEFAULT.PFL error=2
    You can find more information in the log file D:\usr\sap\CE1\J01\j2ee\JSPM\log\log_2007_07_11_18_49_45\JSPM_MAIN_1_01.LOG.
    Use the information provided to troubleshoot the problem. An SAP Note may provide a solution to this problem. Search for SAP Notes with the following key words:
    com.sap.sdt.jspm.phases.PhaseTypeJSPM
    com.sap.sdt.jspm.gui.JspmUiException
    Cannot initialize application data.
    JSPM_MAIN
    JSPMPhases
    NetWeaver Upgrade
    SAPJup
    Java Upgrade
    Any inputs regarding this highly appreciated.
    Thanks
    Siva

    You can look at the following link, it may help
    https://www.sdn.sap.com/irj/sdn/directforumsearch?userid=3474257&rankby=10001&start=90

  • An error has occurred during the execution of the PREPARE_JSPM_QUEUE phase

    Hi ,
         During upgrade of EHP1 - NW 700 i am getting a error in configuration step like An error has occurred during the execution of the PREPARE_JSPM_QUEUE phase
    The validation of the deploy queue was not successful. Request to check queue sapjup-queue completed with error. JSPM version is 7.01.4.0.17. Current JSPM log directory is /usr/sap/BIP/DVEBMGS00/j2ee/JSPM/log/log_2009_08_11_11_44_10.
    You can find more information in the log file /EHPI/java/log/PREPARE_JSPM_QUEUE_CSZ_01.LOG.
    Use the information provided to troubleshoot the problem. An SAP Note may provide a solution to this problem. Search for SAP Notes with the following key words: com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue com.sap.sdt.sapjup.tools.sapjupjspm.JSPMRapiException The validation of the deploy queue was not successful. PREPARE_JSPM_QUEUE INIT NetWeaver Enhancement Package Installation SAPJup Java Enhancement Package Installation
    When reporting problems to SAP Support, attach the trouble ticket file /EHPI/java/log/TroubleTicket_01.txt to your message
    Plz help me to  analyze on this issue.
    Regards,
    Hari

    Hi Vasil Dimitranov
                              Thanks for your response.I have went through the log wat u said and found that only Java Patch JSPM is deployed in my system and the others patches are found be taken from the xml file and not deployed due to this below errors.
    Aug 11, 2009 11:53:33 AM [Error]: java.lang.NullPointerException:
    Aug 11, 2009 11:53:33 AM [Error]: Request to check queue sapjup-queue completed with error.
    Aug 11, 2009 11:53:33 AM [Error]: Request to check queue sapjup-queue completed with error.
    JSPM version is 7.01.4.0.17. Current JSPM log directory is /usr/sap/BIP/DVEBMGS00/j2ee/JSPM/log/log_2009_08_11_11_44_10
    Aug 11, 2009 11:53:33 AM [Info]: Message type received disconnect.
    Aug 11, 2009 11:53:33 AM [Info]: Remote connection is closed.
    Aug 11, 2009 11:53:34 AM [Warning]: Refusing connection.
    Aug 11, 2009 11:53:34 AM [Warning]: Network input/output exception has occurred: Error during read
    Aug 11, 2009 11:53:34 AM [Info]: Phase JSPM/JSPMPhases/JSPM_MAIN has been completed.
    Aug 11, 2009 11:53:34 AM [Info]: Start time: 2009/08/11 11:45:25.
    Aug 11, 2009 11:53:34 AM [Info]: End time: 2009/08/11 11:53:34.
    Aug 11, 2009 11:53:34 AM [Info]: Duration: 0:08:08.764.
    Aug 11, 2009 11:53:34 AM [Info]: Phase status is initial.
    Plz help me on this to analyze regarding the check queue sapjup-queue .
    Thanks in Advance.
    Regards,
    Hari

  • How to Resolve Error: An error as occurred during the move process.

    I am trying to MOVE folders from my Desktop to an External Drive. Error "An error as occurred during the move process. Some files may not have been processed." I regularly Move Folders and I've never had problems before. Why is this happening and how do I resolve? Thanks in advance!

    Nevermind. Just figured out my External Drive does not have enough space left. I'm so glad I wasted half a day trying to figure that one out!

  • Problem to install Indesign CS6,  "an error has occured during the extraction".

    Hi, I downloaded it multiple times, did several attempts on different computers, I always got the same result: "An error has occured during the extraction. Download Indesign CS6 again"

    check your file sizes.
    if they are correct, use a different browser.
    if they are incorrect, use a wired or different connection.

  • [Forum FAQ] Troubleshooting "An error has occurred during report processing" message when viewing SCCM reports

    Symptom:
    When you view a report with SCCM, you may encounter the following error message:
    An error has occurred during report processing.
    Under the details box, you can see the detailed error information as below:
    System.Web.Services.Protocols.SoapException: The report server has encountered a configuration error. Logon failed for the unattended
    execution account. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. Logon failed for the unattended execution account. ---> Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException:
    Log on failed. Ensure the user name and password are correct. ---> System.ComponentModel.Win32Exception: The user name or password is incorrect
    at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ParameterInfoCollection& Parameters)
    at Microsoft.ReportingServices.WebServer.ReportingService2005.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
    Figure 1 is the screenshot of the error message in SCCM:
    Figure 1.
    Cause:
    According to the detailed error message, it indicates that “The report server has encountered a configuration error. Logon failed for the unattended execution account.”
    and “The user name or password is incorrect”, so this issue would be caused by the mismatched credential stored in report server.
    Solution:
    To solve this issue, you can follow the steps below:
      1.
    Access Report Manager URL on your reporting server.
    From figure 2, you can see that the URL for Report Manager is
    http://SCCM:80/Reports
    in our lab environment. You can check your Report Manager URL in Reporting Services Configuration Manager.
    Figure 2.
      2.
    Find out the date source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} and access it.
    Figure 3.
    3. Test connection (Figure 4)
    You can have a test connection to check whether the credentials stored in the report server are correct or not.
    Figure 4.
    4.
    Modify the password or choose another authentication method
    If you want to change the password, please make sure that password is the same as the one that you have set for that user account in the domain.
    5. Confirm connection
    After you change the password, you can test connection again. From figure 5, we can see that connection created successfully.
    Figure 5.
    After all the steps above, there is no error message when viewing the report. (Figure 6)
    Figure 6.
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    ok . the user name is sccm.admin this user have the assignment to run as a services, he is a domain admin, on the sql server this user have the sysadmin, i create the reporting with the Reporting Services Configuration Manager, and on the Database i use
    the sccm.admin to create the new database, on the Service Account i use sccm.admin user, also this user have local administrator on the SCCM server, + i give him the dbreader on All the database on the SCCM server witch it also the SQL server, i add the sccm.admin
    on the reporting web the system role and check the all settings give him full permissions
    do i make my self clear ? (my English is not so bright )
    now from the SCCM 2012 console , some reports run perfectly, and some run and trow this error at me
    Microsoft.Reporting.WinForms.ReportServerException
    An error has occurred during report processing. (rsProcessingAborted)
    Stack Trace:
       at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
       at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
       at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
       at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
       at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
       at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
    this poor gay have the same problem
    An error has occurred during report processing. (rsProcessingAborted)

  • How can tell the script I want to save unsaved files but not replace the old one?

    Hi everyone
    I got this script
    var docs = app.documents; 
    for (var i = docs.length-1; i >= 0; i--) { 
        if (docs[i].saved == false) { 
            docs[i].save(new File(“~/Desktop/Document.indd”)); 
            docs[i].close(); 
        else { 
            docs[i].close(SaveOptions.YES); 
    close and save files
    but if I have two or more files, I want to save files like Doc1, Doc2...
    the new file will never replace the old one
    Can some one tell me how can I do that?
    Thanks
    Regard
    Teetan

    Hi,
    Change the 4th line like below:
            docs[i].save(new File("~/Desktop/Doc" + (i+1) + ".indd"));
    Vandy

  • An error has occurred during the execution of the BIND_SUPPORT_PACKAGES pha

    Hello,
    I am upgrading SRM 7.02/NW 7.00 to SRM 7.02/NW 7.30 on Linux/MAXDB. But i am facing the following issue in BIND_SUPPORT_PACKAGES.
    java.lang.NullPointerException: while trying to invoke the method com.sap.sdt.j2ee.tools.kernel.detect.KernelPatchConfig.getKernelComponentDetails() of an object returned from com.sap.sdt.j2ee.tools.newsdu.NonDeployableComponentsProperties.getJ2eeKernelPatchConfig() java.lang.NullPointerException: while trying to invoke the method com.sap.sdt.j2ee.tools.kernel.detect.KernelPatchConfig.getKernelComponentDetails() of an object returned from com.sap.sdt.j2ee.tools.newsdu.NonDeployableComponentsProperties.getJ2eeKernelPatchConfig()
    Could you please help me on this.
    Thanks & Regards,
    Nishitha

    Hi Nishitha,
    Check if you have you included the correct support packages and stack as it says non deployable components? Is your stack.xml correct?
    Thanks,
    Ravi

  • Fatal Error has occured and the application is being terminated

    It seems that Captivate is eating my projects.  I've started my second project (after completing my first without any errors) and I'm constintly getting corrupted files.  It set me back at least a few hours worth of work.  So I started creating backup files every 10mins, regardless of how much work i've done.  Everything was going fine, until I took an hour break and went to resume my work.
    When I try to open my file I get the following pop up message when trying to open my file: "Adobe Captivate - A fatal error has occured and the application is being terminated. Adobe Captivate has tried to save all your work in the respective project folder as .cpbackup files.  Please restart Adobe Captivate."
    I can click on the program workspace and not click ok on the error message to keep the file open.  I see my slides and objects, but all the text is missing.
    I'm using Captivate 5.5 and windows 7 64.  Within Captivate, I'm using standard objects with importing MP3 audio files and some Photoshop images.  I have a total of 4 slides with 1 being 3.5mins long and the rest are less than 1min.
    When I first started having this problem, I thought maybe the variable files were corrupte so I deleted the Users/name/appdata/local/adobe/Captivate5.5 directory to see if that was the issue.  That was before this last stint of errors.
    I tried opening a backup that was like 10 saves ago, but it displays the same message.
    I'm not sure what to do next.

    Failed to back up the data. A fatal error has occured and the application is being terminated.
    This question is Not Answered.(Mark as assumed answered)
    hi,
    I am working on a content development using captivate 5.5. all of sudden I am not able slide view I am not able to view the text captions in slide view but i am able to see the text caption in Filmstrip. and when I am selecting another side it throwing below error and application ends.
    Adobe Captivate
    A fatal error has occured and the application is being terminated. Adobe Captivate has tried to save all your work in the respective project folders as ".cpbackup" files.
    Please restart Adobe Captivate.
    OK 
    I have a deliverable by this weekend if some can help to resolve this issue will be appreciated.
    Note: when first time it crashed, I re-created the course again from scratch and its crashed again. I have multiple attempt to finish this course but no luck.
    Please help me out to deliver my work.
    Thanks
    CD

  • Cretive Zen V Error has occurred during installat

    I have a big problem with my Zen V, it was all working with my old computer but ever since I got my new computer this is the first time i am connecting my Zen V to it and it just doesn't get detected by the media explorer.
    I have been browsing the forums, I have tried uninstalling the drivers and then let the windows automatically install them but nothing, it just says an "error has occurred during the installing" I have tried pointing the folder to windows/inf but that didn't help. Since there are no drivers for Zen V I'm kind of stuck now and have no idea how I can transfer any music over to my Zen V any more. Any thoughts ? Ideas ?

    Yeah it is there, I deleted it unconnected my player, reconnected, installed the drivers again, and still nothing. Tried pointing to the windows/inf folder, I believe it was called but that didn't help either.

  • Error 1935.An error occurred during the installation of assembly 'Microsoft.VC90.ATL or 'Microsoft.VC80.ATL'

    The OS is Windows Server 2008 R2
    I can't install any programs (like backup agents) that require these components: 
    Microsoft Visual C++ 2005 SP1 Redistributable Package (x64) or the
    Microsoft Visual C++ 2008 SP1 Redistributable Package (x64)
    I've tried unregistering the Windows Installer and reregistering it, starting from a clean boot scenario,
    This is the error message:
    Product: Microsoft Visual C++ 2005 Redistributable (x64) -- Error 1935.An error occurred during the installation of assembly 'Microsoft.VC80.ATL,type="win32",version="8.0.50727.762",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64"'. Please
    refer to Help and Support for more information. HRESULT: 0x80070BC9. assembly interface: IAssemblyCacheItem, function: Commit, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
    Seems like there are thousands of entries when you google this error but not too many solutions.
    The only microsoft support KB entry that deals with this error only is for Windows 7, so the Fix It tool can't be run:
    http://support.microsoft.com/kb/970652

    Hi All
    I have the Same_D_n_Problem.... However, I WAS able to download and install the VC++ 2005 Redist x_64 after removing the one that was there.... Didn't help :(
    Tried removing, then installing using a CleanBoot - no luck
    REinstalled VC++2005 Redist. No problem but cannot install SQL 2008 R2
    Soooo... have traced the SQL Installer log file - and one can get to the entry by searching for 1935 - then looked back for what I think is the begining of the problem - I have marked this with ********************* here is the LogFile excerpt:
    2010-12-29 22:08:59 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\Services\SSIS Server - OK.
    2010-12-29 22:08:59 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\SqlUA - OK.
    2010-12-29 22:08:59 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\SqlUA\CurrentVersion - OK.
    2010-12-29 22:08:59 Slp: ------------------------------------------------------------
    2010-12-29 22:08:59 Slp: D:\SQLInstal\x64\FixSqlRegistryKey_x86.exe exit code: 0
    2010-12-29 22:08:59 Slp: Completed Action: FixSqlRegistryKey, returned True
    2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
    2010-12-29 22:08:59 Slp: Running Action: PostMsiTimingConfigAction
    2010-12-29 22:08:59 Slp: The object state property 'workflow' is null/empty. *********************
    2010-12-29 22:08:59 Slp: Error: Action "PostMsiTimingConfigAction" failed during execution.
    2010-12-29 22:08:59 Slp: Completed Action: PostMsiTimingConfigAction, returned False
    2010-12-29 22:08:59 Slp: Completed Action: ExecuteStandardTimingsWorkflow, returned True
    2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
    2010-12-29 22:08:59 Slp: Running Action: ExecuteCloseWorkflow
    2010-12-29 22:08:59 Slp: Workflow to execute: 'CLOSE'
    2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
    2010-12-29 22:08:59 Slp: Skipping Action: ProduceStatusLogs
    2010-12-29 22:08:59 Slp: Action is being skipped due to the following restrictions:
    2010-12-29 22:08:59 Slp: Condition "Is the datastore flag /Scenario/GlobalFlags/AreProductFeaturesSupported set" did not pass as it returned false and true was expected.
    2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
    2010-12-29 22:08:59 Slp: Running Action: FinalizeProgressStatus
    2010-12-29 22:08:59 Slp: Completed Action: FinalizeProgressStatus, returned True
    2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
    2010-12-29 22:08:59 Slp: Running Action: RebootMessageAction
    2010-12-29 22:08:59 Slp: Completed Action: RebootMessageAction, returned True
    2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
    2010-12-29 22:08:59 Slp: Skipping Action: FinishPage
    2010-12-29 22:08:59 Slp: Action is being skipped due to the following restrictions:
    2010-12-29 22:08:59 Slp: Condition "Is the user's scenario set to EditionUpgrade" did not pass as it returned false and true was expected.
    2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
    2010-12-29 22:08:59 Slp: Skipping property RequireMode of class: StopAction
    2010-12-29 22:08:59 Slp: Input of property will not be set due to the following failed restriction(s):
    2010-12-29 22:08:59 Slp: Condition "Is the user's scenario set to ComponentUpdate" did not pass as it returned true and false was expected.
    2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
    2010-12-29 22:08:59 Slp: Running Action: CloseUI
    2010-12-29 22:08:59 Slp: Stop Action
    2010-12-29 22:08:59 Slp: Completed Action: CloseUI, returned True
    2010-12-29 22:08:59 Slp: Completed Action: ExecuteCloseWorkflow, returned True
    2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
    2010-12-29 22:08:59 Slp: Running Action: PassPidBackFromComponentUpdate
    2010-12-29 22:08:59 Slp: Pass the flag CuPidDisplayed to the main setup
    2010-12-29 22:08:59 Slp: ENU value specified, trying to pass the value to main setup
    2010-12-29 22:08:59 Slp: PID value specified, trying to pass the value to main setup
    2010-12-29 22:08:59 Slp: SQMREPORTING value is specified in CU workflow, trying to pass the value to main setup
    2010-12-29 22:08:59 Slp: Completed Action: PassPidBackFromComponentUpdate, returned True
    2010-12-29 22:08:59 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
    2010-12-29 22:08:59 Slp: Sco: Attempting to open registry subkey Software\Microsoft\Microsoft SQL Server\100
    2010-12-29 22:08:59 Slp: Sco: Attempting to get registry value CustomerFeedback
    2010-12-29 22:09:00 Slp:
    2010-12-29 22:09:00 Slp:
    2010-12-29 22:09:00 Slp: ----------------------------------------------------------------------
    2010-12-29 22:09:00 Slp:
    2010-12-29 22:09:00 Slp: Error result: -2068052081
    2010-12-29 22:09:00 Slp: Result facility code: 1212
    2010-12-29 22:09:00 Slp: Result error code: 1935
    2010-12-29 22:09:00 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
    2010-12-29 22:09:00 Slp: Sco: Attempting to open registry subkey
    2010-12-29 22:09:00 Slp: Sco: Attempting to open registry subkey Software\Microsoft\PCHealth\ErrorReporting\DW\Installed
    2010-12-29 22:09:00 Slp: Sco: Attempting to get registry value DW0201
    2010-12-29 22:09:22 Slp: Submitted 1 of 1 failures to the Watson data repository
    2010-12-29 22:09:22 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
    2010-12-29 22:09:22 Slp: Sco: Attempting to open registry subkey Software\Microsoft\Microsoft SQL Server\100
    2010-12-29 22:09:22 Slp: Sco: Attempting to get registry value CustomerFeedback
    Would be great to hear others' thoughts on this
    Cheers
    Martin

  • An error occurred during the Network Policy Server use of the Extensible Authentication Protocol (EAP).

    Hello everyone:
    I know this question have been asked in these forums quite a few times. I apologize if it is a repeat telecast but I was not able to find a suitable solution pertaining to my problem.
    I have a AP/SM setup that is configured to get EAP-PEAP authentication from Windows 2012 Server. I have setup everything and have verified that the EAP-PEAP authentication works fine on AP/SM by getting authentication from FreeRADIUS server. Now, when I try
    to get authentication from Windows Server, I am getting a reject. The Event log shows this generic message:
    Reason Code: 23
    Reason:
        An error occurred during the Network Policy Server use of the Extensible Authentication Protocol (EAP). Check EAP log files for EAP errors.
    There is nothing in the EAP logs that is obvious too:
    "USIL01PMPTST01","IAS",07/11/2014,11:59:44,1,"SANDBOX\test","SANDBOX\test",,,,,,"10.120.133.10",5,0,"10.120.133.10","Canopy_AP",,,18,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1
    07/11/2014 00:05:57 4927",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
    "USIL01PMPTST01","IAS",07/11/2014,11:59:44,11,,"SANDBOX\test",,,,,,,,0,"10.120.133.10","Canopy_AP",,,,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1 07/11/2014 00:05:57 4927",30,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
    "USIL01PMPTST01","IAS",07/11/2014,11:59:44,1,"SANDBOX\test","SANDBOX\test",,,,,,"10.120.133.10",5,0,"10.120.133.10","Canopy_AP",,,18,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1
    07/11/2014 00:05:57 4928",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
    "USIL01PMPTST01","IAS",07/11/2014,11:59:44,11,,"SANDBOX\test",,,,,,,,0,"10.120.133.10","Canopy_AP",,,,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1 07/11/2014 00:05:57 4928",30,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
    "USIL01PMPTST01","IAS",07/11/2014,11:59:44,1,"SANDBOX\test","SANDBOX\test",,,,,,"10.120.133.10",5,0,"10.120.133.10","Canopy_AP",,,18,,,,11,"PEAP_TEST",0,"311 1 10.120.133.1
    07/11/2014 00:05:57 4929",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
    "USIL01PMPTST01","IAS",07/11/2014,11:59:44,3,,"SANDBOX\test",,,,,,,,0,"10.120.133.10","Canopy_AP",,,,,,,11,"PEAP_TEST",23,"311 1 10.120.133.1 07/11/2014 00:05:57 4929",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
    So, basically, the sequence is this:
    request , challenge, request , challenge, request, reject
    Any idea what might be happening?
    Thank you.

    Hi,
    Have you installed certificates on the NPS server properly? Have you selected the proper certificate in the properties of PEAP?
    Here is an article about the Certificate requirements of PEAP,
    Certificate requirements when you use EAP-TLS or PEAP with EAP-TLS
    http://support.microsoft.com/kb/814394
    If your certificate matches the requirement, you may try to reinstall the certificate by export and import.
    To export a certificate, please follow the steps below,
    Open the Certificates snap-in for a user, computer, or service.
    In the console tree under the logical store that contains the certificate to export, click
    Certificates.
    In the details pane, click the certificate that you want to export.
    On the Action menu, point to
    All Tasks, and then click Export.
    In the Certificate Export Wizard, click No, do not export the private key. (This option will appear only if the private key is marked as exportable and you have access to the private key.)
    Provide the following information in the Certificate Export Wizard:
    Click the file format that you want to use to store the exported certificate: a DER-encoded file, a Base64-encoded file, or a PKCS #7 file.
    If you are exporting the certificate to a PKCS #7 file, you also have the option to include all certificates in the certification path.
    If required, in Password, type a password to encrypt the private key you are exporting. In
    Confirm password, type the same password again, and then click
    Next.
    In File name, type a file name and path for the PKCS #7 file that will store the exported certificate and private key. Click
    Next, and then click Finish.
    To import a certificate, please follow the steps below,
    Open the Certificates snap-in for a user, computer, or service.
    In the console tree, click the logical store where you want to import the certificate.
    On the Action menu, point to
    All Tasks, and then click Import to start the Certificate Import Wizard.
    Type the file name containing the certificate to be imported. (You can also click
    Browse and navigate to the file.)
    If it is a PKCS #12 file, do the following:
    Type the password used to encrypt the private key.
    (Optional) If you want to be able to use strong private key protection, select the
    Enable strong private key protection check box.
    (Optional) If you want to back up or transport your keys at a later time, select the
    Mark key as exportable check box.
    Do one of the following:
    If the certificate should be automatically placed in a certificate store based on the type of certificate, click
    Automatically select the certificate store based on the type of certificate.
    If you want to specify where the certificate is stored, select
    Place all certificates in the following store, click
    Browse, and choose the certificate store to use.
    If issue persists, you may try to re-issue the certificate.
    For detailed procedure, you may refer to the similar threads below,
    Having issues getting PEAP with EAP-MSCHAP v2 working on Windows 2008 R2
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/c66cf0a8-24dd-4ccd-b5bb-16bd28ad8d4c/having-issues-getting-peap-with-eapmschap-v2-working-on-windows-2008-r2?forum=winserverNAP
    Hope this helps.
    Steven Lee
    TechNet Community Support

  • Problem: An error occured during the uploading process.

    Hello!  I've searched around but I am having difficulty finding a solution to this problem.
    I am trying to upload videos through Adobe Premiere Elements 9 to YouTube, using the preset options in the share tab.  This worked previously without issue, but then one day I continually ran into an error stating "Sorry, an error occured during the uploading process.  Please try again later."  However, it eventually started working.  It is now a few weeks later, and I am having the very same issue.  I am unable to upload to YouTube or any other service through the Share tab.  Even loading the software itself, the opening splash screen is unable to grab my Adobe ID.  It never stops "Gathering User Info..."
    Steps I have tried:
    Going to Edit -> Preferences -> Web Sharing and hitting the refresh button to update settings.
    Checked router settings.
    Enabled DMZ on router and linked it to this specific computer.
    Rebooted PC and router, and tried updating the Web Sharing settings multiple times.
    I honestly do not believe it to be a router issue, especially since it is currently in DMZ mode and I have had absolutely no trouble with any other software.  This has continued to baffle me though, and finding help is difficult.  Searches keep giving me encoding settings for YouTube videos, and few results pertain to this particular issue.
    I am aware I could export the video normally and upload through YouTube that way, but on DSL, my upload speed is pretty terrible for a high quality video.  The YouTube HD setting has been great for me in the past, as files are small but still look great online.  I would really like to get it working again, both for ease and convenience for simple projects.
    If anyone has any ideas as to what could be causing a problem, I would be greatly appreciative of any advice.  In regards to the project itself, there is no real editing being done at this point, as I am trying to eliminate any possibility of error elsewhere. I opened a new project, added a video clip and went directly to upload it, resulting in the error above.
    I don't believe it matters in this situation, but just in case:
    Windows 7
    AMD Phenom II X4 820 - 2.80 GHz
    6 GB RAM
    Radeon HD 5880 1GB
    Connecting through a Netgear WNDR3400 router, standard DSL connection.

    Sorry, not seeing where to edit my original post.
    Just wanted to add, that I am able to visit both the Photoshop.com website, as well as YouTube through my browser.  So I am not being blocked somehow to those particular sites.  It only seems to be through the software that I cannot connect to any of the online services to upload videos to.
    Additionally, the only virus software running is Microsoft Security Essentials.  It has never raised a flag before with this software or caused interference in the past.  I do not use Norton or any other service which are known to interfere with programs often.
    Just a quick example as well, pinging Photoshop.com through the command prompt shows I am getting through just fine.  As you can see in this image though, it cannot seem to ever connect and grab my user information.
    http://i.imgur.com/S53xN.png

  • An error occurred during the installation of assembly 'Microsoft.VC80.ATL,version="8.0.50727.1833",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64",type="win32"'. Please refer to Help and Support for more information. HRESULT: 0x80070003.

    I received the above error reinstalling SQL Server 2008.  I have tried all suggestions.  This error also appears when I install any version of SQL Server.
    I have also installed;
    Microsoft® .NET Framework Version 2.0.50727.4927
    Microsoft® .NET Framework Version 4.0.31106.0
    Microsoft® .NET Framework Version 3.0.6920.50
    Microsoft Visual C++ 2005 Redistributable (x64) 8.0.59192
    Microsoft Visual C++ 2008 ATL Update kb973924 - x86 9.0.30729.4148
    Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.4148
    Microsoft Visual C++ 2010 x64 Redistributable 10.0.40219
    Microsoft Visual C++ 2010 x86 Redistributable 10.0.40219
    Microsoft Visual C++ 2012 Redistributable (x64) - 11.0.60610
    Microsoft Visual C++ 2012 Redistributable (x86) - 11.0.61030
    Overall summary:
      Final result:                  SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
    rerun SQL Server Setup.
      Exit code (Decimal):           -2068052081
      Exit facility code:            1212
      Exit error code:               1935
      Exit message:                  SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
    rerun SQL Server Setup.
      Start time:                    2014-02-23 19:17:20
      End time:                      2014-02-23 19:21:35
      Requested action:              Install
      Log with failure:              C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140223_191513\SqlSupport_KatmaiRTM_Cpu64_1.log
      Exception help link:           http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1
    Machine Properties:
      Machine name:                  OHPC
      Machine processor count:       2
      OS version:                    Windows 7
      OS service pack:               Service Pack 1
      OS region:                     United States
      OS language:                   English (United States)
      OS architecture:               x64
      Process architecture:          64 Bit
      OS clustered:                  No
    Product features discovered:
      Product              Instance             Instance ID                   
    Feature                                  Language            
    Edition              Version         Clustered
    Package properties:
      Description:                   SQL Server Database Services 2008 R2
      ProductName:                   SQL Server 2008 R2
      Type:                          RTM
      Version:                       10
      SPLevel:                       0
      Installation location:         H:\SQLServer2008R2_SP1\x64\setup\
      Installation edition:          DEVELOPER
    User Input Settings:
      ACTION:                        Install
      ADDCURRENTUSERASSQLADMIN:      False
      AGTSVCACCOUNT:                 NT AUTHORITY\SYSTEM
      AGTSVCPASSWORD:                *****
      AGTSVCSTARTUPTYPE:             Manual
      ASBACKUPDIR:                   Backup
      ASCOLLATION:                   Latin1_General_CI_AS
      ASCONFIGDIR:                   Config
      ASDATADIR:                     Data
      ASDOMAINGROUP:                 <empty>
      ASLOGDIR:                      Log
      ASPROVIDERMSOLAP:              1
      ASSVCACCOUNT:                  <empty>
      ASSVCPASSWORD:                 *****
      ASSVCSTARTUPTYPE:              Automatic
      ASSYSADMINACCOUNTS:            <empty>
      ASTEMPDIR:                     Temp
      BROWSERSVCSTARTUPTYPE:         Disabled
      CONFIGURATIONFILE:             C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140223_191513\ConfigurationFile.ini
      CUSOURCE:                      
      ENABLERANU:                    False
      ENU:                           True
      ERRORREPORTING:                False
      FARMACCOUNT:                   <empty>
      FARMADMINPORT:                 0
      FARMPASSWORD:                  *****
      FEATURES:                      SQLENGINE
      FILESTREAMLEVEL:               0
      FILESTREAMSHARENAME:           <empty>
      FTSVCACCOUNT:                  <empty>
      FTSVCPASSWORD:                 *****
      HELP:                          False
      IACCEPTSQLSERVERLICENSETERMS:  False
      INDICATEPROGRESS:              False
      INSTALLSHAREDDIR:              C:\Program Files\Microsoft SQL Server\
      INSTALLSHAREDWOWDIR:           C:\Program Files (x86)\Microsoft SQL Server\
      INSTALLSQLDATADIR:             <empty>
      INSTANCEDIR:                   C:\Program Files\Microsoft SQL Server\
      INSTANCEID:                    MSSQLSERVER
      INSTANCENAME:                  MSSQLSERVER
      ISSVCACCOUNT:                  NT AUTHORITY\NetworkService
      ISSVCPASSWORD:                 *****
      ISSVCSTARTUPTYPE:              Automatic
      NPENABLED:                     0
      PASSPHRASE:                    *****
      PCUSOURCE:                     
      PID:                           *****
      QUIET:                         False
      QUIETSIMPLE:                   False
      ROLE:                          <empty>
      RSINSTALLMODE:                 FilesOnlyMode
      RSSVCACCOUNT:                  <empty>
      RSSVCPASSWORD:                 *****
      RSSVCSTARTUPTYPE:              Automatic
      SAPWD:                         *****
      SECURITYMODE:                  <empty>
      SQLBACKUPDIR:                  <empty>
      SQLCOLLATION:                  SQL_Latin1_General_CP1_CI_AS
      SQLSVCACCOUNT:                 NT AUTHORITY\SYSTEM
      SQLSVCPASSWORD:                *****
      SQLSVCSTARTUPTYPE:             Automatic
      SQLSYSADMINACCOUNTS:           OHPC\Robert
      SQLTEMPDBDIR:                  <empty>
      SQLTEMPDBLOGDIR:               <empty>
      SQLUSERDBDIR:                  <empty>
      SQLUSERDBLOGDIR:               <empty>
      SQMREPORTING:                  True
      TCPENABLED:                    0
      UIMODE:                        Normal
      X86:                           False
      Configuration file:            C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140223_191513\ConfigurationFile.ini
    Detailed results:
      Feature:                       Database Engine Services
      Status:                        Failed: see logs for details
      MSI status:                    Passed
      Configuration status:          Passed
    Rules with failures:
    Global rules:
    Scenario specific rules:
    Rules report file:               C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140223_191513\SystemConfigurationCheck_Report.htm
    SFC/ Scannow
    2014-02-23 19:08:22, Info                  CSI    0000016f [SR] Verifying 100 (0x0000000000000064) components
    2014-02-23 19:08:22, Info                  CSI    00000170 [SR] Beginning Verify and Repair transaction
    2014-02-23 19:08:23, Info                  CSI    00000172 [SR] Cannot repair member file [l:20{10}]"wscsvc.dll" of Microsoft-Windows-SecurityCenter-Core,
    Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    2014-02-23 19:08:23, Info                  CSI    00000174 [SR] Cannot repair member file [l:30{15}]"amd64_installed" of Microsoft-Windows-ServicingStack,
    Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    2014-02-23 19:08:26, Info                  CSI    00000176 [SR] Cannot repair member file [l:20{10}]"wscsvc.dll" of Microsoft-Windows-SecurityCenter-Core,
    Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    2014-02-23 19:08:26, Info                  CSI    00000177 [SR] This component was referenced by [l:242{121}]"Microsoft-Windows-Client-Features-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.Microsoft-Windows-Client-Features-Update"
    2014-02-23 19:08:26, Info                  CSI    00000179 [SR] Could not reproject corrupted file [ml:520{260},l:46{23}]"\??\C:\Windows\System32"\[l:20{10}]"wscsvc.dll";
    source file in store is also corrupted
    2014-02-23 19:08:27, Info                  CSI    0000017c [SR] Cannot repair member file [l:30{15}]"amd64_installed" of Microsoft-Windows-ServicingStack,
    Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    2014-02-23 19:08:27, Info                  CSI    0000017d [SR] This component was referenced by [l:154{77}]"Package_2_for_KB2533552~31bf3856ad364e35~amd64~~6.1.1.1.2533552-4_neutral_GDR"
    2014-02-23 19:08:27, Info                  CSI    00000180 [SR] Could not reproject corrupted file [ml:520{260},l:94{47}]"\??\C:\Windows\Servicing\Version\6.1.7601.17592"\[l:30{15}]"amd64_installed";
    source file in store is also corrupted
    2014-02-23 19:08:27, Info                  CSI    00000182 [SR] Verify complete
    2014-02-23 19:12:33, Info                  CSI    00000326 [SR] Verifying 100 (0x0000000000000064) components
    2014-02-23 19:12:33, Info                  CSI    00000327 [SR] Beginning Verify and Repair transaction
    2014-02-23 19:12:33, Info                  CSI    00000329 [SR] Cannot repair member file [l:26{13}]"x86_installed" of Microsoft-Windows-ServicingStack,
    Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    2014-02-23 19:12:35, Info                  CSI    0000032b [SR] Cannot repair member file [l:26{13}]"x86_installed" of Microsoft-Windows-ServicingStack,
    Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    2014-02-23 19:12:35, Info                  CSI    0000032c [SR] This component was referenced by [l:154{77}]"Package_2_for_KB2533552~31bf3856ad364e35~amd64~~6.1.1.1.2533552-3_neutral_GDR"
    2014-02-23 19:12:35, Info                  CSI    0000032f [SR] Could not reproject corrupted file [ml:520{260},l:94{47}]"\??\C:\Windows\Servicing\Version\6.1.7601.17592"\[l:26{13}]"x86_installed";
    source file in store is also corrupted
    2014-02-23 19:12:36, Info                  CSI    00000331 [SR] Verify complete
    2014-02-23 19:13:14, Info                  CSI    0000035d [SR] Repairing 3 components
    2014-02-23 19:13:14, Info                  CSI    0000035e [SR] Beginning Verify and Repair transaction
    2014-02-23 19:13:14, Info                  CSI    00000360 [SR] Cannot repair member file [l:20{10}]"wscsvc.dll" of Microsoft-Windows-SecurityCenter-Core,
    Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    2014-02-23 19:13:14, Info                  CSI    00000362 [SR] Cannot repair member file [l:30{15}]"amd64_installed" of Microsoft-Windows-ServicingStack,
    Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    2014-02-23 19:13:14, Info                  CSI    00000364 [SR] Cannot repair member file [l:26{13}]"x86_installed" of Microsoft-Windows-ServicingStack,
    Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    2014-02-23 19:13:14, Info                  CSI    00000366 [SR] Cannot repair member file [l:26{13}]"x86_installed" of Microsoft-Windows-ServicingStack,
    Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    2014-02-23 19:13:14, Info                  CSI    00000367 [SR] This component was referenced by [l:154{77}]"Package_2_for_KB2533552~31bf3856ad364e35~amd64~~6.1.1.1.2533552-3_neutral_GDR"
    2014-02-23 19:13:15, Info                  CSI    0000036a [SR] Could not reproject corrupted file [ml:520{260},l:94{47}]"\??\C:\Windows\Servicing\Version\6.1.7601.17592"\[l:26{13}]"x86_installed";
    source file in store is also corrupted
    2014-02-23 19:13:15, Info                  CSI    0000036c [SR] Cannot repair member file [l:20{10}]"wscsvc.dll" of Microsoft-Windows-SecurityCenter-Core,
    Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    2014-02-23 19:13:15, Info                  CSI    0000036d [SR] This component was referenced by [l:242{121}]"Microsoft-Windows-Client-Features-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.Microsoft-Windows-Client-Features-Update"
    2014-02-23 19:13:15, Info                  CSI    0000036f [SR] Could not reproject corrupted file [ml:520{260},l:46{23}]"\??\C:\Windows\System32"\[l:20{10}]"wscsvc.dll";
    source file in store is also corrupted
    2014-02-23 19:13:15, Info                  CSI    00000371 [SR] Cannot repair member file [l:30{15}]"amd64_installed" of Microsoft-Windows-ServicingStack,
    Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    2014-02-23 19:13:15, Info                  CSI    00000372 [SR] This component was referenced by [l:154{77}]"Package_2_for_KB2533552~31bf3856ad364e35~amd64~~6.1.1.1.2533552-4_neutral_GDR"
    2014-02-23 19:13:15, Info                  CSI    00000375 [SR] Could not reproject corrupted file [ml:520{260},l:94{47}]"\??\C:\Windows\Servicing\Version\6.1.7601.17592"\[l:30{15}]"amd64_installed";
    source file in store is also corrupted
    2014-02-23 19:13:15, Info                  CSI    00000377 [SR] Repair complete
    2014-02-23 19:13:15, Info                  CSI    00000378 [SR] Committing transaction
    2014-02-23 19:13:15, Info                  CSI    0000037c [SR] Verify and Repair Transaction completed. All files and registry keys listed in this transaction 
    have been successfully repaired

    Summary:
    Attempted proposed solution.  Error still appears.
    This is installed:
    Microsoft Visual C++ 2005 ATL Update kb973923 - x86 8.0.50727.4053
    Microsoft Visual C++ 2005 Redistributable               8.0.56336
    Microsoft Visual C++ 2005 Redistributable (x64)         8.0.59192
    Microsoft Visual C++ 2008 ATL Update kb973924 - x86 9.0.30729.4148
    Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.4148
    Microsoft Visual C++ 2010 x64 Redistributable - 10.0.40219
    Microsoft Visual C++ 2010 x86 Redistributable - 10.0.40219
    Microsoft Visual C++ 2012 Redistributable (x64) - 11.0.60610
    Microsoft Visual C++ 2012 Redistributable (x86) - 11.0.61030
    I reinstalled:
    vcredist_x64 Microsoft Visual C++ 2005 SP1 Redistributable Package (x64) .exe
    vcredist_x86 Microsoft Visual C++ 2005 SP1 Redistributable Package (x86).exe
    Results:
    Windows Installer reconfigured the product. Product Name: Microsoft Visual C++ 2005 Redistributable (x64). Product Version: 8.0.56336. Product Language: 0. Manufacturer: Microsoft
    Corporation. Reconfiguration success or error status: 0.
    Windows Installer reconfigured the product. Product Name: Microsoft Visual C++ 2005 Redistributable. Product Version: 8.0.56336. Product Language: 0. Manufacturer: Microsoft Corporation.
    Reconfiguration success or error status: 0.
    I installed SQLServer2008R2_SP1
    Same error message came up;
    SqlSupport_KatmaiRTM_Cpu64_1.log
    MSI (s) (64:94) [23:03:43:910]: Source for file 'pfbafgaq.dll' is uncompressed, at 'H:\SQLServer2008R2_SP1\1033_ENU_LP\x64\setup\sql2008support\PFiles\SqlServr\100\Setup\Release\x64\'.
    MSI (s) (64:94) [23:03:43:926]: Executing op: SetTargetFolder(Folder=C:\Windows\winsxs\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.1833_none_8a17faaf2edd3e00\)
    MSI (s) (64:94) [23:03:43:926]: Executing op: SetSourceFolder(Folder=1\Windows\winsxs\nvdlei3o.taa\)
    MSI (s) (64:94) [23:03:43:926]: Executing op: RegisterSharedComponentProvider(,,File=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,Component={837BF1EB-D770-94EB-A01F-
    C8B3B9A1E18E},ComponentVersion=8.0.50727.1833,ProductCode={B40EE88B-400A-4266-A17B-
    E3DE64E94431},ProductVersion=10.1.2731,PatchSize=0,PatchAttributes=0,PatchSequence=0,SharedComponent=0,IsFullFile=0)
    MSI (s) (64:94) [23:03:43:941]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
    \amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\ATL80.dll,FileKey=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={071c9b48-7c32-4621-a0ac-
    3f809523288f},ProductVersion=8.0.56336,Attributes=0,,,,CopierFlags=0,,,,,,)
    MSI (s) (64:94) [23:03:43:957]: Executing op: RegisterSharedComponentProvider(,,File=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,Component={837BF1EB-D770-94EB-A01F-
    C8B3B9A1E18E},ComponentVersion=8.0.50727.762,ProductCode={071c9b48-7c32-4621-a0ac-
    3f809523288f},ProductVersion=8.0.56336,PatchSize=0,PatchAttributes=0,PatchSequence=0,SharedComponent=0,IsFullFile=0)
    MSI (s) (64:94) [23:03:43:957]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
    \amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\amd64_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.1833_x-
    ww_f19a562a.cat,FileKey=ul_catalog.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={071c9b48-7c32-4621-a0ac-3f809523288f},ProductVersion=8.0.56336,Attributes=0,,,,CopierFlags=0,,,,,,)
    MSI (s) (64:94) [23:03:43:957]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
    \amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\amd64_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.1833_x-
    ww_f19a562a.manifest,FileKey=ul_manifest.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={071c9b48-7c32-4621-a0ac-
    3f809523288f},ProductVersion=8.0.56336,Attributes=0,,,,CopierFlags=0,,,,,,)
    MSI (s) (64:94) [23:03:43:957]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
    \amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\ATL80.dll,FileKey=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={D40172D6-CE2D-4B72-BF5F-
    26A04A900B7B},ProductVersion=11.0.0,Attributes=0,,,,CopierFlags=0,,,,,,)
    MSI (s) (64:94) [23:03:43:957]: Executing op: RegisterSharedComponentProvider(,,File=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,Component={837BF1EB-D770-94EB-A01F-
    C8B3B9A1E18E},ComponentVersion=8.0.50727.762,ProductCode={D40172D6-CE2D-4B72-BF5F-
    26A04A900B7B},ProductVersion=11.0.0,PatchSize=0,PatchAttributes=0,PatchSequence=0,SharedComponent=0,IsFullFile=0)
    MSI (s) (64:94) [23:03:43:972]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
    \amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\amd64_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.1833_x-
    ww_f19a562a.cat,FileKey=ul_catalog.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={D40172D6-CE2D-4B72-BF5F-26A04A900B7B},ProductVersion=11.0.0,Attributes=0,,,,CopierFlags=0,,,,,,)
    MSI (s) (64:94) [23:03:43:972]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
    \amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\amd64_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.1833_x-
    ww_f19a562a.manifest,FileKey=ul_manifest.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={D40172D6-CE2D-4B72-BF5F-
    26A04A900B7B},ProductVersion=11.0.0,Attributes=0,,,,CopierFlags=0,,,,,,)
    MSI (s) (64:94) [23:03:43:972]: Executing op: AssemblyCopy(SourceName=uvdlei3o.taa|
    ATL80.dll,SourceCabKey=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,DestName=ATL80.dll,Attributes=0,FileSize=113152,PerTick=65536,,VerifyMedia=1,ElevateFlags=4,,,,ComponentId=
    {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E},,,,AssemblyMode=0,)
    MSI (s) (64:94) [23:03:43:972]: Assembly Error:The system cannot find the path specified.
    MSI (s) (64:94) [23:03:43:972]: Note: 1: 1935 2: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E} 3: 0x80070003 4: IAssemblyCache 5: CreateAssemblyCacheItem 6:
    Microsoft.VC80.ATL,version="8.0.50727.1833",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64",type="win32"
    MSI (s) (64:94) [23:03:43:972]: Assembly Error (sxs): Please look into Component Based Servicing Log located at -169675656ndir\logs\cbs\cbs.log to get more diagnostic information.
    MSI (s) (64:94) [23:03:49:882]: Product: Microsoft SQL Server 2008 Setup Support Files  -- Error 1935. An error occurred during the installation of assembly
    'Microsoft.VC80.ATL,version="8.0.50727.1833",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64",type="win32"'. Please refer to Help and Support for more information.
    HRESULT: 0x80070003. assembly interface: IAssemblyCache, function: CreateAssemblyCacheItem, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
    Error 1935. An error occurred during the installation of assembly
    'Microsoft.VC80.ATL,version="8.0.50727.1833",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64",type="win32"'. Please refer to Help and Support for more information.
    HRESULT: 0x80070003. assembly interface: IAssemblyCache, function: CreateAssemblyCacheItem, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
    MSI (s) (64:94) [23:03:49:882]: User policy value 'DisableRollback' is 0
    Thanks, Ted U

Maybe you are looking for

  • HT201209 Gifting an app will not work with gift card?

    Ok. So I have plenty of money on my account.  But it will not let me gift an app with it? Why not.

  • A New IPhone for My Business

    Hey- I have a few questions about this iPhone. I am not a person who understands this technical stuff easily, FYI. I have a MBP which has ben in TX (I think it went) for what were called "software problems" 4 times the first year. I cracked the LCD,

  • Problem with viewing videos in Full Screen

    I have created a playlist containing numerous music videos in iTunes Windows XP. I have no problem entering Full Screen, but at various points of time, the full screen will cut out reverting back to the smaller size. It seems to happen after about 2

  • SAXParser InputStream problem - URGENT

    hi i'm trying to parse a a xml document as an inputstream, but every time i try to compile the code the following error appears: "Incompatible type for method. Can't convert java.io.InputStream to java.lang.String". the parse constructor as an inputs

  • JTable with Groupable Header

    Hi again, Im have problems with a JTable supporting Groupable Header check this code please: public class GroupableHeaderExample extends JFrame {   GroupableHeaderExample() {     super( "Groupable Header Example" );     DefaultTableModel dm = new Def