An error during the boot

sunsparc.localhost svc.startd[7]: [ID 652011 daemon.warning] svc
:/network/rpc/nisplus:default: Method "/lib/svc/method/nisplus" failed with exit
status 96.
bash-3.00# cat network-rpc-nisplus:default.log
[ feb 11 12:33:35 Disabled. ]
[ feb 11 12:33:37 Rereading configuration. ]
[ Feb 12 03:55:34 Enabled. ]
[ Feb 12 03:55:34 Executing start method ("/lib/svc/method/nisplus") ]
[ Feb 12 03:55:35 Method "start" exited with status 96 ]
[ feb 12 12:57:59 Executing start method ("/lib/svc/method/nisplus") ]
[ feb 12 12:57:59 Method "start" exited with status 96 ]
[ feb 12 13:18:48 Executing start method ("/lib/svc/method/nisplus") ]
[ feb 12 13:18:49 Method "start" exited with status 96 ]
[ feb 12 13:30:51 Executing start method ("/lib/svc/method/nisplus") ]
[ feb 12 13:30:52 Method "start" exited with status 96 ]
what's?
this was happen when i've reconfigured my system with sys-unconfig command...
and i've also see a strange etc/nsswitch.conf file
# /etc/nsswitch.nisplus:
# An example file that could be copied over to /etc/nsswitch.conf; it
# uses NIS+ (NIS Version 3) in conjunction with files.
# "hosts:" and "services:" in this file are used only if the
# /etc/netconfig file has a "-" for nametoaddr_libs of "inet" transports.
# NIS+ service requires that svc:/network/rpc/nisplus:default be enabled
# and online.
# the following two lines obviate the "+" entry in /etc/passwd and /etc/group.
passwd: files nisplus
group: files nisplus
# consult /etc "files" only if nisplus is down.
hosts: nisplus [NOTFOUND=return] files dns
# Note that IPv4 addresses are searched for in all of the ipnodes databases
# before searching the hosts databases.
ipnodes: nisplus [NOTFOUND=return] files
#Uncomment the following two lines, and comment out the above, to use
#both DNS and NIS+. You must also set up the /etc/resolv.conf file for
#DNS name server lookup. See resolv.conf(4).
#hosts: nisplus dns [NOTFOUND=return] files
#ipnodes: nisplus dns [NOTFOUND=return] files
services: nisplus [NOTFOUND=return] files
networks: nisplus [NOTFOUND=return] files
protocols: nisplus [NOTFOUND=return] files
rpc: nisplus [NOTFOUND=return] files
ethers: nisplus [NOTFOUND=return] files
netmasks: nisplus [NOTFOUND=return] files
bootparams: nisplus [NOTFOUND=return] files
publickey: nisplus
netgroup: nisplus
automount: files nisplus
aliases: files nisplus
printers: user nisplus files
auth_attr: files nisplus
prof_attr: files nisplus
project: files

log into the system in single user mode and try to do sys-unconfig and make sure that you choose the option of no Naming systems , the other option will be NIS , NIS+ , LDAP , DNS . choose DNS if you have the name of the DNS servers and you want to use the same .
This should solve ur issue .
Rgds
PK

Similar Messages

Problem with udev during the boot

Hi guys,
Sorry if I didn't post this message in the good section but I didn't find any support section, so I supposed that this section was the most apropriate.
So, I have a really ennoying problem with udevd since the latest kernel upgrade (3.2.2-1) during the boot.
I have the following error at the boot:
"udevd[37]: No such file or directory." and then the OS is unable to mount the disks and give me the weakest shell ever while saying me "You're on your own". Thank you Arch!
I can't find any informations on google about this error, and I d'ont find a complete explanation of udev debug (specialy because no logs are written at this moment).
Thank you very much guys.

GreenTime wrote:
qaws or someone else:
Could you elaborate on how to just reinstall the kernel? Somehow I'm stuck
Usually, you'll need a live CD (I recommend an ArchLinux Installation CD) or an LTS kernel sitting around on the same machine that can get you more or less into your favored machine. It can also be done, by pxe/diskless booting from an installation (I'm a fan of quick and efficient)! Then you have to mount all the necessary partitions /, /usr (sometimes /var if you need your packages) and most importantly /boot. They have to be mounted underneath the rescue system being used , usually under /mnt. Also needed is a mock-up of your /proc. /sys and /dev. Once they are mounted accordingly, then you chroot into your installation you need to fix. It helps if the rescue system has the same kernel, because the chroot'ed system usually tries to build your kernel based on the rescue system, but if you have your kernel package handy, it will build it with the packages modules & kernel.

Lightroom 5 says "There has been an error during the modification of the modules." Lightroom does not open, freezes.

Hi, I've got Creative Cloud, on a Mac Pro late 2010, 6 Core, 3.3 Gz, which has just been emptied and re-set with Yosemite. I've downloaded the Adobe stuff I need, especially Ps, Il, Id, Pp, Ae and Lightroom 5. Everything works find except Lightroom which doesn't open, giving me this message each time: "There has been an error during the modification of the modules." There is no error number attached and the program freezes. I've got a deadline which has been broken because I can't finish the work I've started in Lightroom 5 on my old computer which I deactivated in order to run the new one. Now I don't know what to do nor where to look for the problem. I've placed the Lightroom Library on an external LaCie 4Big 8Tb Raid 5.

Error changing modules | Lightroom

I am getting the following error during the play of a rented movie from my MacBook that i am trying to watch on AppleTV Could not play the rental "A Thousand Words" because it is authorized to play on another computer or device." any ideas?

I am getting the following error during the play of a rented movie from my MacBook that i am trying to watch on AppleTV Could not play the rental “A Thousand Words” because it is authorized to play on another computer or device." any ideas?

Rentals can only play on one device/computer at a time. Have you tried to play on the computer and still have that window open?
Have you transferred the rental to iPod/iPhone or iPad to watch?
If it won't play anywhere contact iTunes support at:
expresslane.apple.com
AC

There is always a blue screen appears after the Apple logo during the booting process. And then everything is back to normal. What is this thing? Is there something wrong with my screen or something?

There is always a blue screen appears after the Apple logo during the booting process. And then everything is back to normal. What is this thing? Is there something wrong with my screen or something?

Nah - that's just the normal boot process.
Clinton

In updating my iPod to 6.1.2, I received an error during the update. Now, ipod is not rebooting. Has screen showing usb to Itunes picture.   Turning off and back on it goes back to this picture. I don't know how to reset so that I can restore my backup

In updating my iPod to 6.1.2, I received an error during the update. Now, my ipod is not rebooting. It continues to display a screen showing usb to Itunes picture.   Turning off and back on, it goes back to this picture. I don't know how to reset so that I can restore from my backup.
A similar thing happened when I updated the ios on my ipad. But, I was able to reboot, and then restore from backup.   How can I get my ipod to reboot and allow restore when it is not even recognized as I reconnect to my computer?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

RSA1 Error during the retrieval of the logon data stored in secure storage

Hi Gurus,
when i go and check Source system the connection is OK, and RFC's from BI to R/3 and R/3 to BI is OK (including Authentication).
but when i go and check Info provider there one customized object ZDTSYS01 is there when i check and and activate it it is giving error as below.
All DDIC objects have been activated / deleted
Post Processing/Checking the Activation for DataStore Object ZDTSYS01
Creating Export DataSource and dependent Objects
The creation of the export DataSource failed
Reading the Metadata of ZDTSYS01 ...
Creating DataSource 8ZDTSYS01 ...
Error during the retrieval of the logon data stored in secure storage
Error during the retrieval of the logon data stored in secure storage
Error when creating the export DataSource and dependent Objects
Program ID DC4B105KR4QT1KDW9HD7AXYEO retrieved for DataStore object ZDTSYS01
Error when activating DataStore Object ZDTSYS01
Deletion of Unused Dictionary Objects ( 3)
please help me solve this issue
Thanks in advance
venkat

Hi,
1). Looks like SM59 Remote user has some issues. Can you check whether the user's are locked ?
2). You can also correct this is TA STMS. Here you navigate to "System Overview (Shift+F6)".
On the following screen, you select "Generate RFC DESTINATIONS" which can be found under "Extras".
3). Please click on source system and restore the BW source system
Please check the below 2 SAP Notes.
538052 and 644015.This might solve your problem.
Thanks,
Arjun

Getting error during the Oracle9i installation "Oracle9i Database Release 2 (9.2.0.1.0) for Compaq Tru64 machine"

Hi All,
Getting follwing error during the Oracle9i installation “Oracle9i Database Release 2 (9.2.0.1.0) for Compaq Tru64 machine"
u01/app/oracle/product/9.2.0/install/make.log
- Linking Oracle
rm -f /u01/app/oracle/product/9.2.0/rdbms/lib/oracle
cc -L/u01/app/oracle/product/9.2.0/lib/ -L/u01/app/oracle/product/9.2.0/rdbms/lib -o /u01/app/oracle/product/9.2.0/rdbms/lib/oracla
ld:
load_whole_file: Could not malloc 31328. bytes, for /u01/app/oracle/product/9.2.0/lib//libn9.a(asndata.o), didnt attempt to mmap
Stop.
*** Exit 1
While checked the memory details in the machine its showing plenty of free virtual memory.
# ps aux
USER PID %CPU %MEM   VSZ RSS TTY      S STARTED         TIME COMMAND
oracle     1353 0.6 27.2 601M 555M pts/2    S N 09:14:07 5:49.67 /tmp/OraInstall2014-01-21_09-14-02AM/jre/bin/../bin/alpha/native_threads/java -Doracle.installe
root       3033 0.0 0.4 10.4M 7.7M pts/0    R + 10:59:44 0:00.06 ps aux
oracle     1351 0.0 0.0 2.46M 320K pts/2    I N 09:14:02 0:01.36 ksh /tmp/OraInstall2014-01-21_09-14-02AM/installer -Doracle.installer.library_loc=/tmp/OraInsta
oracle     1277 0.0 0.0 2.48M 312K pts/2    I + 09:02:44 0:00.04 -ksh (ksh)
root       1269 0.0 0.0 2.56M 232K pts/2    I    09:01:23 0:00.01 -sh (sh)
root       1268 0.0 0.0 5.31M 768K ??       I    09:01:22 0:00.11 /usr/bin/X11/xterm -ls
root 1 0.0 0.0 608K 96K ?? IL   08:45:31     0:00.08 /sbin/init -a
root 0 0.0 3.9 2.52G 79M ?? R < 08:45:31     0:23.16 [kernel idle]
And I have rebooted the machine still also getting the same error.
Is there any way to resolve this issue??
Regards
prasanta

Pl elaborate the business / technical reason for installing a 15+ year old unsupported software on a 15+ year old unsupported hardware, assuming you are installing an a supported OS version
HTH
Srini

SMQ2: SYSFAIL Comparison error during the execution of a simple

Hi folks, I have an operation mapping interface determination with exactly 1 target message of occurence 0..1, that means the mapping output can be nothing for some input messages, that means a target message is not produced so that the output looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<Messages><Message1/></Messages>
In services builder the test finishes successfully when no output message is produced. Also in integration builder i can test the configuration and it works without errors.
But in runtime the message status is set to "Recorded for Outbound Processing" in SXI_MONITOR and the queue status of the message to "Message has errors". The message stops in SMQ2 with "SYSFAIL" as status and statusText "Comparison error during the execution of a simple" (truncated).
Anybody experienced the same? How has the output of an operation mapping to look like when no target message is produced?
I also tested with an output like this when no target is produced, but this results in System error "Split mapping created no messages" in SXI_MONITOR:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1></ns0:Message1></ns0:Messages>
Thanks for your help, best regards, Martin

You seem to be having a multi-mapping involved.
The operation mapping has to produce at least the start and end tag.....even if the entire message is not present
Ex:
<SRC>
<First>
<Middle>
<Last>
</SRC>
If above is the structure, then it should be ensured that at least <SRC></SRC> is created by your mapping program....however in your case this is not happening....the tags that you see Messages and Message1 are due to the multi-mapping program and your message should be more than this.
if you say that occurence is 0..1 then what you can do is map this 0..1 node (root) with at least a blank Constant.
Unless you create a message (even though empty) you will continue to receive the error message.
Regards,
Abhishek.

Error during the installation of SAPNetWeaver

i try to insall sap netweaver but there is error during the installation,the message is:
Errors occurred during the installation.
An error occurred and product installation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
when i check the file C:\sapdb\NSP\log.txt for error i find :
Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst: One or more validation errors occured:
Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst: PARAMETER     ERRORMESSAGE
Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst: =========     ============
Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst: DBNAME     Instance already exists
Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst: Database NSP must not exist
Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst: installation exited abnormally at Mo, Mar 15, 2010 at 00:06:00
Mon Mar 15 00:06:02 CET 2010 MaxDB: Error during call to sdbinst, rc= 1
Mon Mar 15 00:06:02 CET 2010 MaxDB: Done with call_sdbinst
Mon Mar 15 00:06:02 CET 2010 MaxDB: rc of sdbinst = 1
Mon Mar 15 00:06:02 CET 2010 MaxDB: Start of CallSdbuninst
Mon Mar 15 00:06:02 CET 2010 MaxDB: No IndepProgPath. Nothing to do.
can you help me to solve this problem

Hi Mustsap,
as the log points out, there are remainders of a previous installation of NSP DB on your computer.
Try the RegClean tool that comes with the evaluation copy. Eventualy you have to delete keys from the registry manualy. You won't be able to to reinstall before these remainders are removed.
Cheers Markus

Error during the elaboration of the argument....

Hello to all,
Executing the following code:
Default_Binding_Contact port;
ContactWS_ContactQueryPage_Input qryParam;
qryParam = new ContactWS_ContactQueryPage_Input();
qryParam.pageSize = "100";
qryParam.setStartRowNum("0");
qryParam.setUseChildAnd("False");
qryParam.setListOfContact(new Contact[1]);
qryParam.getListOfContact()[0]=new Client.Contact();
qryParam.getListOfContact()[0].setContactLastName("........");
.contactQueryPage(qryParam);
AxisFault
faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server
faultSubcode:
faultString: Error during the elaboration of the argument urn:/crmondemand/xml/contact:ListOfContact per l'operazione ContactQueryPage(SBL-EAI-04316)
faultActor:
faultNode:
Why?
thanks for the aid

Paste the entires from BCOS_CUST table
Regards
Nick Loy

Error during the retrieval of the logon data stored in secure storage

Hi guys,
Can anyone help us with this webservice Datasource Transport error.We have already done some Webservice datasources before and successfully transported but never had this error before.
Error during the retrieval of the logon data stored in secure storage.
Thanks
Jay.

Hi,
maybe the user is not created successfully.
You can correct this is TA STMS. Here you navigate to "System Overview (Shift+F6)".
On the following screen, you select "Generate RFC DESTINATIONS" which can be found under "Extras".
Best,
Stephan

Error during the installation of permanent license keys

Dear Experts,
When applying SAPLicense following error message is geeting, please help how can i resolve this issue
" Error during the installation of permanent license keys"

More information needed.
For example:
Your SAP version?
Is it a system copy?
How exactly did you try to delete from SAP level?
Without this information, nobody here can do anything but guess.
There are a lot of SAP notes about similar problems.
But for this you will have to supply more information.
Or better; Search in SAP notes yourself!
And here is my guess:
SAP Note 917936 - License keys cannot be deleted by user SAP*

Error during the retrieval of the logon data store Message was Not Created

Dear Gurus,
I got this error while creating support message.
Error in Local Message System: Error during the retrieval of the logon data store Message was Not Created
Message no. BCOS088
Wether this support message will be send to SAP Support or internal sap support team in an organisation.
I am new to SAP BASIS. Kindly explain clearly

Paste the entires from BCOS_CUST table
Regards
Nick Loy

Error during the retrieval of the logon data stored in secure storage RSAR0

Hi Friends,
during the replication process of a data source I get the error.
"Error during the retrieval of the logon data stored in secure storage" RSAR051
I found note 538052 but this does not help so much.
Can some one help me with this?
Thanks in advance
Rg. Jimbob

Hi,
We are getting the same error when selecting "Customizing Extractors" option in Source System in TCode: RSA1. Please let me know how did u solved the problem.
Thanks.

An error during the boot

Similar Messages

Maybe you are looking for