An error during the installation of OS X !!

During the installation of OS X maverick an error occurred pointing that my Macintosh disk is damaged and can't be repaired !! The installation is not being continued and I can't go back to my old version !! However The only available choices are disk utility, terminal, firmware password utility and restore....
Please tell me what to do to at least get the important files from my disk because I never backed up :(

Select Disk Utility and try repairing the disk and disk permissions.
Do yo have access to another Mac and and external HD?  If so connect your MBP to the other Mac with a Firewire cable and boot the MBP into Target Disk Mode,  Transferring files between two computers using FireWire.
The other Mac will see the MBP as an external HD where you can copy your Home folder to the external HD which should be formatted OS X Extended (journaled). If you have 3rd party apps copy them also to the EHD.
Now with your files safely backed up you can go about trying to getting the MBP's drive backup and running or replaced if that's what is called for.
OT

Similar Messages

  • Error during  the installation of SAPNetWeaver

    i try to insall sap netweaver but there is error during the installation,the message is:
    Errors occurred during the installation.
    An error occurred and product installation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
    when i check the file C:\sapdb\NSP\log.txt  for error i find :
    Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst: One or more  validation errors occured:
    Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst:  PARAMETER     ERRORMESSAGE
    Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst:  =========     ============
    Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst:  DBNAME     Instance already exists
    Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst: Database NSP must not exist
    Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst: installation exited abnormally  at Mo, Mar 15, 2010 at 00:06:00
    Mon Mar 15 00:06:02 CET 2010 MaxDB: Error during call to sdbinst, rc= 1
    Mon Mar 15 00:06:02 CET 2010 MaxDB: Done with call_sdbinst
    Mon Mar 15 00:06:02 CET 2010 MaxDB: rc of sdbinst = 1
    Mon Mar 15 00:06:02 CET 2010 MaxDB: Start of CallSdbuninst
    Mon Mar 15 00:06:02 CET 2010 MaxDB: No IndepProgPath. Nothing to do.
    can you help me to solve this problem

    Hi Mustsap,
    as the log points out, there are remainders of a previous installation of NSP DB on your computer.
    Try the RegClean tool that comes with the evaluation copy. Eventualy you have to delete keys from the registry manualy. You won't be able to to reinstall before these remainders are removed.
    Cheers Markus

  • Error during the installation of permanent license keys

    Dear Experts,
    When applying SAPLicense following error message is geeting, please help how can i resolve this issue
    " Error during the installation of permanent license keys"

    More information needed.
    For example:
    Your SAP version?
    Is it a system copy?
    How exactly did you try to delete from SAP level?
    Without this information, nobody here can do anything but guess.
    There are a lot of SAP notes about similar problems.
    But for this you will have to supply more information.
    Or better; Search in SAP notes yourself!
    And here is my guess:
    SAP Note 917936 - License keys cannot be deleted by user SAP*

  • ORA-20001 GET_BLOCK-ERROR during the installation of an application

    hi people,
    I' ve got the following error during the installation of an application in apex 2.2.
    ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-02047: cannot join the distributed transaction in progress <pre>begin execute immediate 'alter session set nls_numeric_characters='''||wwv_flow_api.g_nls_numeric_chars||'''';end;</pre>
    Can anybody help me?
    Message was edited by:
    user512746

    hi,
    db-version is oracle 10g r2
    os windows server 2003
    the error occured when two ore more people working in their workspaces but not when only one person working in his workspace
    Message was edited by:
    user512746
    Message was edited by:
    user512746

  • Error during the installation of CS6 web premium

    Hello, during el'installation CS6 premium web, I encountered problems , software photoshop, illustrator, indesign and do not install , errors are:
    Exit Code: 6
    Please see Specific errors and warnings below for troubleshooting . For example, ERROR: DF024 , DW063 ...
    -------------------------------------- Summary ----------- ---------------------------
    - 0 fatal error (s ), 8 error (s) , 0 warning ( s)
    ----------- Payload : { 97BA0109 - F6BE - 4F50 - 8904 - C19442D7216E } Adobe Bridge CS6 5.0.0.0 -----------
    ERROR: DF024 : Unable to move file at " C: \ Program Files ( x86) \ Common Files\Adobe\Installers\adobeTemp\{97BA0109-F6BE-4F50-8904-C19442D7216E}\_162_e20376b4e275 9915be266334ff95d29f" to " C: \ Program Files ( x86) \ Common Files \ Adobe \ Bridge CS6 Extensions \ Adobe Output Module \ Mediagallery \ resources \ flashgallery \ autorun.inf" Error 5 Access Denied (Seq 237) .
    ERROR: DW063 . ARKMoveFileCommand Command failed ( Seq 237)
    ERROR: DR011 : Deleting Registry Key - failure . E ( Seq 69 )
    ----------- Payload : { 00496505 - D56B - 4B07 - A8C5 - 70A0B4E689F7 } Adobe Bridge CS6 (64 bit) 5.0.0.0 -----------
    ERROR: DF024 : Unable to move file at " C: \ Program Files ( x86) \ Common Files\Adobe\Installers\adobeTemp\{00496505-D56B-4B07-A8C5-70A0B4E689F7}\_166_e20376b4e275 9915be266334ff95d29f" to " C: \ Program Files \ Common Files \ Adobe \ Bridge CS6 Extensions \ Adobe Output Module \ Mediagallery \ resources \ flashgallery \ autorun.inf" Error 5 Access Denied (Seq 548) .
    ERROR: DW063 . ARKMoveFileCommand Command failed ( Seq 548)
    ERROR: DR011 : Deleting Registry Key - failure . E ( Seq 68 )
    ERROR: DW050 : The following payload errors were found falling on install:
    ERROR: DW050 : - Adobe Bridge CS6 (64 Bit ) : Install failed
    ERROR: DW050 : - Adobe Bridge CS6 : Install failed 

    clean your system and reinstall following these steps, http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
    except, when you reinstall, right click the installation file and click 'run as administrator'.

  • Error during the Installation of WAS 6.40

    i got the following error while i tried to install WAS 6.40 on a machine. My database is Oracle OraHome81. I finished installing the Central Instance Installation(ABAP). I incurred this Problem during the Database Instance Installation(ABAP stack).
    <b>ERROR 2005-11-30 11:19:32 FSL-06002  Error 2 (The system cannot find the file specified. in execution of a 'CreateProcess' function, line (278), with parameter (d:\oracle\ora81/bin/lsnrctl stop LISTENER).</b>
    Thanks in advance
    Arun Kumar Ravi

    check that,Oracle is properly installed in your machine.
    if not,uninstall the oracle and install it again and start with the central instance installation.
    before starting fresh installation,make sure you remove the already existing files in the system registry.

  • Apache Error During the Installation of Oracle 10g Infrastructure

    Hi,
    I am installing the Oracle 10g Infrastructure.During the OPMN Configuration Assistant Installation, i encountered the Apache error. The error is failed to start a managed process after the maximum entry limit. I tried this command: opmnctl startproc ias-component=HTTP_Server but still the windows displays this message: Apache.exe has encountered a problem and needs to close. When I open the logs located at <ORACLE_HOME>\opmn\logs\HTTP_Server.log, the logs says Unclean shutdown of previous Apache run?. I tried to uninstall using deconfiguration.pl but the program says that its ok to use the Universal installer. I uninstall then deleted the entries at the registry and then reinstall it, but still, it displays the error. Are there any solution that can solve this problem?
    I am installing in windows xp service 2. My oracle infrastructure version is 10.1.2

    Hi,
    There is no error_log file under this directory: <ORACLE_HOME>/Apache/Apache/logs. Maybe the cause is the conflict of computer name. I'll keep you posted as long as I finish installing the application.

  • Cacaoadm error during the installation

    Hello everyone
    I haven't much experience with Solaris and decieded to play a bit with it and the whole software available for the system. The N1 System Manager sounded quite nice so I tried to install it. I had a few problems but until now, I was able to overcome them but now, I'm stuck with the following error:
    -bash-3.00# ./install
    Please read the Software License Agreement before proceeding.
    Do you accept the license agreement? [y/n]:
    y
    Checking required perl modules...
                    N1SM Installer (version 1.3.3 on SunOS)
    1. Install OS packages.                                             [Completed]
    2. Install Expect.                                                  [Completed]
    3. Install IPMI tool.                                               [Completed]
    4. Install JDK 1.5.                                                 [Completed]
    5. Install service provisioning components.                         [Completed]
    6. Install OS provisioning components.                              [Completed]
    7. Copy DHCP configuration file.                                    [Completed]
    8. Install user interface components.                               [Completed]
    9. Install service container components.                        [Partially Run]
    10. Install N1 System Manager.                                   [Not Completed]
    Non-interactive install in progress.
    Executing current step:  Install service container components...
                    N1SM Installer (version 1.3.3 on SunOS)
    1. Install OS packages.                                             [Completed]
    2. Install Expect.                                                  [Completed]
    3. Install IPMI tool.                                               [Completed]
    4. Install JDK 1.5.                                                 [Completed]
    5. Install service provisioning components.                         [Completed]
    6. Install OS provisioning components.                              [Completed]
    7. Copy DHCP configuration file.                                    [Completed]
    8. Install user interface components.                               [Completed]
    9. Install service container components.                        [Partially Run]
    10. Install N1 System Manager.                                   [Not Completed]
    Failed Step:  Install service container components.
    The following is a portion of the installer
    log which may indicate the cause of the error.
    If this does not indicate the cause of the
    error, you will need to view the full log
    file. More information on how to do that is
    available below.
    Installation of <SUNWjdmk-runtime-jmx> was successful.
    /opt/SUNWcacao/bin/cacaoadm: test: argument expected
    Error setting cacao java flags "-Dsun.security.pkcs11.enable-solaris=false -Xmx1                                                           024m -Xss256k -server"
    Please fix the problem and then try this step again.
    For a full log of the failed install see the file: /var/tmp/installer.log.8863.
    t. Try this step again (correct the failure before proceeding)
    x. Exit
    Enter selection: (t/x)Any ideas what's wrong with the "/opt/SUNWcacao/bin/cacaoadm: test: argument expected"?

    Hello Kishore,
    I'm using Solaris 10 11/06 s10x_u3wos_10 X86.
    /var/tmp/installer.log.8863:
    All required perl modules installed.
    Ignoring job: 01removeEmptyDirs.pl
    Ignoring job: 0checkRPMs.pl
    Ignoring job: 0installPython.pl
    Executing job: jobs/4installCacao.pl --install 
    Calling installPackage(/software/Solaris_x86/Product//components/cacao//SUNWcacaocfg)
    installPKG() from dir /software/Solaris_x86/Product//components/cacao/ "SUNWcacaocfg"
    installPKG(): Installing from /software/Solaris_x86/Product//components/cacao/ pkg SUNWcacaocfg
    Processing package instance <SUNWcacaocfg> from </software/Solaris_x86/Product/components/cacao>
    Cacao configuration files(i386) 1.1,REV=15
    This appears to be an attempt to install the same architecture and
    version of a package which is already installed.  This installation
    will attempt to overwrite this package.
    Copyright 2004-2005 Sun Microsystems, Inc.  All rights reserved.
    Use is subject to license terms.
    Using </> as the package base directory.
    ## Processing package information.
    ## Processing system information.
       15 package pathnames are already properly installed.
    ## Verifying disk space requirements.
    ## Checking for conflicts with packages already installed.
    ## Checking for setuid/setgid programs.
    This package contains scripts which will be executed with super-user
    permission during the process of installing this package.
    Do you want to continue with the installation of <SUNWcacaocfg> [y,n,?]
    Installing Cacao configuration files as <SUNWcacaocfg>
    ## Installing part 1 of 1.
    Installation of <SUNWcacaocfg> was successful.
    Calling installPackage(/software/Solaris_x86/Product//components/cacao//SUNWcacao)
    installPKG() from dir /software/Solaris_x86/Product//components/cacao/ "SUNWcacao"
    installPKG(): Installing from /software/Solaris_x86/Product//components/cacao/ pkg SUNWcacao
    Processing package instance <SUNWcacao> from </software/Solaris_x86/Product/components/cacao>
    Cacao Component(i386) 1.1,REV=15
    This appears to be an attempt to install the same architecture and
    version of a package which is already installed.  This installation
    will attempt to overwrite this package.
    Copyright 2004-2005 Sun Microsystems, Inc.  All rights reserved.
    Use is subject to license terms.
    Using </opt> as the package base directory.
    ## Processing package information.
    ## Processing system information.
       73 package pathnames are already properly installed.
    ## Verifying package dependencies.
    ## Verifying disk space requirements.
    ## Checking for conflicts with packages already installed.
    ## Checking for setuid/setgid programs.
    The following files are being installed with setuid and/or setgid
    permissions:
    * /opt/SUNWcacao/lib/tools/cacaocsc <setuid root>
    * /opt/SUNWcacao/lib/tools/suexec <setuid root>
    * - overwriting a file which is also setuid/setgid.
    Do you want to install these as setuid/setgid files [y,n,?,q]
    This package contains scripts which will be executed with super-user
    permission during the process of installing this package.
    Do you want to continue with the installation of <SUNWcacao> [y,n,?]
    Installing Cacao Component as <SUNWcacao>
    ## Executing preinstall script.
    ## Installing part 1 of 1.
    ## Executing postinstall script.
    Saving cacao configuration parameters in //etc/opt/SUNWcacao/old_config.bak
    Installation of <SUNWcacao> was successful.
    Calling installPackage(/software/Solaris_x86/Product//components/cacao//ext_pkgs/jdmk/SUNWjdmk-runtime.pkg)
    installPKG() from file /software/Solaris_x86/Product//components/cacao//ext_pkgs/jdmk/SUNWjdmk-runtime.pkg "SUNWjdmk-runtime"
    installPKG(): Installing from /software/Solaris_x86/Product//components/cacao//ext_pkgs/jdmk/SUNWjdmk-runtime.pkg pkg SUNWjdmk-runtime
    Processing package instance <SUNWjdmk-runtime> from </software/Solaris_x86/Product/components/cacao/ext_pkgs/jdmk/SUNWjdmk-runtime.pkg>
    Java DMK 5.1 Runtime Library(all) 5.1,REV=34
    This appears to be an attempt to install the same architecture and
    version of a package which is already installed.  This installation
    will attempt to overwrite this package.
    Using </opt> as the package base directory.
    ## Processing package information.
    ## Processing system information.
       11 package pathnames are already properly installed.
    ## Verifying disk space requirements.
    ## Checking for conflicts with packages already installed.
    ## Checking for setuid/setgid programs.
    Installing Java DMK 5.1 Runtime Library as <SUNWjdmk-runtime>
    ## Installing part 1 of 1.
    [ verifying class <none> ]
    Copyright 2004 Sun Microsystems, Inc.  All rights reserved.
    Use is subject to license terms.
    Installation of <SUNWjdmk-runtime> was successful.
    Calling installPackage(/software/Solaris_x86/Product//components/cacao//ext_pkgs/jdmk/SUNWjdmk-runtime-jmx.pkg)
    installPKG() from file /software/Solaris_x86/Product//components/cacao//ext_pkgs/jdmk/SUNWjdmk-runtime-jmx.pkg "SUNWjdmk-runtime-jmx"
    installPKG(): Installing from /software/Solaris_x86/Product//components/cacao//ext_pkgs/jdmk/SUNWjdmk-runtime-jmx.pkg pkg SUNWjdmk-runtime-jmx
    Processing package instance <SUNWjdmk-runtime-jmx> from </software/Solaris_x86/Product/components/cacao/ext_pkgs/jdmk/SUNWjdmk-runtime-jmx.pkg>
    Java DMK 5.1 JMX libraries(all) 5.1,REV=34
    This appears to be an attempt to install the same architecture and
    version of a package which is already installed.  This installation
    will attempt to overwrite this package.
    Using </opt> as the package base directory.
    ## Processing package information.
    ## Processing system information.
       9 package pathnames are already properly installed.
    ## Verifying disk space requirements.
    ## Checking for conflicts with packages already installed.
    ## Checking for setuid/setgid programs.
    Installing Java DMK 5.1 JMX libraries as <SUNWjdmk-runtime-jmx>
    ## Installing part 1 of 1.
    [ verifying class <none> ]
    Copyright 2004 Sun Microsystems, Inc.  All rights reserved.
    Use is subject to license terms.
    Installation of <SUNWjdmk-runtime-jmx> was successful.
    /opt/SUNWcacao/bin/cacaoadm: test: argument expected
    Error setting cacao java flags "-Dsun.security.pkcs11.enable-solaris=false -Xmx1024m -Xss256k -server"# pkginfo | grep SUNWcacao:
    application SUNWcacao                    Cacao Component
    application SUNWcacaocfg                 Cacao configuration files
    application SUNWcacaort                  Common Agent Container - Runtime# pkginfo -l SUNWcacao
       PKGINST:  SUNWcacao
          NAME:  Cacao Component
      CATEGORY:  application
          ARCH:  i386
       VERSION:  1.1,REV=15
       BASEDIR:  /opt
        VENDOR:  Sun Microsystems, Inc.
          DESC:  Cacao framework
        PSTAMP:  1.1,REV=15-patch_01,Aug/23/05
      INSTDATE:  Jul 01 2007 22:21
       HOTLINE:  Please contact your local service provider
        STATUS:  completely installed
         FILES:       73 installed pathnames
                      16 directories
                       5 executables
                       2 setuid/setgid executables
                    2589 blocks used (approx)

  • I cant seem to download the latest version of itunes to my laptop computer. I keep getting an error during the installation of assembley "Microsoft VC80.CRT.type="win 32".version="8.0.507276195"Please refer to Help and Support for more information. HRES7

    I cant seem to download the latset version of itunes onto my laptop computer. I keep getting this error HRESULT: 0x8007054F. Dont know what that means. Please HELP!!!!!!!!!!!!!!

    Hi tKalra - I got the same error and finally managed to install itunes successfully. Below is what happened with me.
    I have Windows7 64 bit. I downloaded itunes 10.6.3 for windows64bit and started the installation wizard by opening the downloaded file. At one stage I got the same error you have mentioned above. I started googling to find a solution and thats how I found your post. Anyway I went through lot of other posts that suggested lot of different things but I just wanted to try my own thing first.
    So what I did is to go through with the wizard by clicking ok on the error. I then got an error about apple mobile device service not running. I ignored and went ahead with the installation. Installation finished but the itunes wont start giving the service not running error. I tried to manually start the service but it gave a privilege error.
    I then went to control panel and uninstalled itunes, apple mobile device thing and bonjour..basically what ever was from apple. Then I also went to start -> run -> regedit and checked for any registry keys for apple under local user and local computer. Deleted if found. Restarted and then just right clicked on the itunes setup file that was downloaded and ran it as administrator. That did it for me. So I am guessing it was privilege thing but not sure. Hope this helps.

  • Error during the installation of assembly "Microsoft. VC80.CRT.type="win32".version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b ".processorArchitecture="x86"".see Help and Support for more information. HRESULT : 0x80070002.

    i was trying to download the new itunes, ahd this message appeared. What can i do?

    OK.  If both of you are Windows 7.  Make sure you go to Windows update (START button, type in Windows Update). Check for updates and update whatever that are available. (especially Microsoft .NET Framework 4 )
    After that see if you still get this error message.
    The last resort would be to unistall and reinstall the whole thing.
    Follow the steps below:
    1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
    2. You should remove all instances of iTunes and the rest of the components listed below:
    it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
    Use the Control Panel to uninstall iTunes and related software components in the following order:
    iTunes
    QuickTime
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
    3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

  • Error during the installation of ORACLE 10g for SAP MDM 5.5

    Hi all,
    I am installing ORACLE 10g on a SUSE LES 9 for a future MDM 5.5 system. While I launch the Installer I get the following error:
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2007-09-26_07-11-46AM. Please wait ...oracle@mucsapt2:/home/lrougkal/OraDb10g/database> Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2007-09-26_07-11-46AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
            at java.lang.ClassLoader$NativeLibrary.load(Native Method)
            at java.lang.ClassLoader.loadLibrary0(Unknown Source)
            at java.lang.ClassLoader.loadLibrary(Unknown Source)
            at java.lang.Runtime.loadLibrary0(Unknown Source)
            at java.lang.System.loadLibrary(Unknown Source)
            at sun.security.action.LoadLibraryAction.run(Unknown Source)
            at java.security.AccessController.doPrivileged(Native Method)
            at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
            at sun.awt.DebugHelper.<clinit>(Unknown Source)
            at java.awt.Component.<clinit>(Unknown Source)
    I have installed all the required packages from SUSE :
    binutils-2.15.90.0.1.1-32.10
    gcc-3.3.3-43.41
    gcc-c++-3.3.3-43.41
    glibc-2.3.3-98.61
    gnome-libs-1.4.1.7-671.1
    libstdc++-3.3.3-43.41
    libstdc++-devel-3.3.3-43.41
    make-3.80-184.1
    pdksh-5.2.14-780.7
    sysstat-5.0.1-35.7
    xscreensaver-4.16-2.6
    Any ideas?
    Thanks in advance,
    Loukas

    Hi Elmar,
    I have checked the packages and the XFree86-libs-4.3.99 is not installed. I guess I will have to install it.
    Now your question about oracle user. I am not sure if you have performed any SAP MDM installation with ORACLE RDBMS but the installation guide is totally different than the normal SAP inst guides. Indeed someone needs to install separately SAP MDM and ORACLE and in my installation I do not install NetWeaver since it is not mandatory for the testing phase of the project. You can have a look at the guide (it is very poor -no reference to ORACLE details):
    https://websmp105.sap-ag.de/~sapidb/011000358700000271882007E
    So the official ORACLE inst gudie says to install the ORACLE software with the oracle user.
    Rgds,
    Louka

  • Error during the installation of BI system

    Hi all,
        During the installing of BI, an error that "SDM could not start the J2EE cluster on the host cbsapprod1! The online deployment is terminated. " happened.
        I check the J2EE engine by using the MMC, everything is working fine.
        Anyone knows how to solve it?
    Detail log:
    Info: SDA to be deployed: D:\usr\sap\KPP\DVEBMGS00\SDM\root\origin\sap.com\irj\SAP AG\0\7.0009.20061026160346.0000\epbcsda.ear
    Info: Software type of SDA: J2EE
    Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) *****
    Info: Starting cluster instance processes.
    Info: Starting the instance JC_cbsapprod1_KPP_00 running on host cbsapprod1
    Info: Starting the instance JC_cbsapprod1_KPP_00 processes. The instance is running on host cbsapprod1                     
    Info: Starting the process dispatcher
    Info: Starting the process server0
    Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
    Error: Aborted: development component 'irj'/'sap.com'/'SAP AG'/'7.0009.20061026160346.0000'/'0', grouped by software component 'EPBC'/'sap.com'/'SAP AG'/'1000.7.00.9.2.20061026162900''/'0':
    SDM could not start the J2EE cluster on the host cbsapprod1! The online deployment is terminated.
    A timeout occured during the cluster running verification.
    (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineJ2EE620OnlineDeployerImpl.performAction(DeploymentActionTypes).STARTUP_CLUSTER)
    Info: Starting to save the repository
    Info: Finished saving the repository
    Info: Starting: Initial deployment: Selected software component 'EPBC'/'sap.com'/'SAP AG'/'1000.7.00.9.2.20061026162900''/'0' will be deployed.
    Error: Aborted: software component 'EPBC'/'sap.com'/'SAP AG'/'1000.7.00.9.2.20061026162900''/'0':
    Failed deployment of SDAs:
    development component 'irj'/'sap.com'/'SAP AG'/'7.0009.20061026160346.0000'/'0' : aborted
    Please, look at error logs above for more information!
    Info: Starting to save the repository
    Info: Finished saving the repository
    Info: Restoring the state of the instance (JC_cbsapprod1_KPP_00) process server0 from Stopped to Running
    Error: Received exception when restoring Engine state: A timeout occured during the cluster state restore verification.
    Error: -
    At least one of the Deployments failed -
    Info: Summarizing the deployment results:
    Error: Aborted: D:\BISETUP SOFTWARE200803\SAP NETWEAVER 2004S SR2 Java based Software Components\J2EE_OSINDEP\UT\EPBC09_2.SCA
    Processing error. Return code: 4
    Error: Processing error. Return code: 4
    WARNING 2008-03-18 20:51:27
    SDM call of deploySdaList ends with returncode 4. See output of logfile C:\PROGRA1\SAPINS1\NW04S\SYSTEM\MSS\CENTRAL\AS\callSdmViaSapinst.log.
    ERROR 2008-03-18 20:51:27
    CJS-30156  SDM deployment failed for at least one of the components to deploy.<br> SOLUTION: Check 'C:/PROGRA1/SAPINS1/NW04S/SYSTEM/MSS/CENTRAL/AS/callSdmViaSapinst.log' for more information.
    ERROR 2008-03-18 20:51:28
    FCO-00011  The step enableUsageTypes with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Enablement|ind|ind|ind|ind|4|0|enableUsageTypes was executed with status ERROR .

    Hello,
    i have got the same error with the blank directory.
    /SAP AG on Linux redhat5
    Info: Deploy Action is UPDATE
    Info: Update - no information about previously deployed files available. Deploy new files only.
    Info: Deploying Fileset SAP SLD Model Data / SAP_LCR_Model_Data to /usr/sap/COA/SYS/global/sld
    Error: Error: Could not extract file META-INF/SAP_MANIFEST.MF from archive /usrsap/COA/DVEBMGS00/SDM/root/origin/sap.com/tc/sld/data/SAP AG /0/7.0014.20071029095152.0000/lcrwork.sda
    Error: Additional error message is:
    Error: /usr/sap/COA/SYS/global/sld/META-INF/SAP_MANIFEST.MF (No such file or directory)
    Error: Error deploying Fileset SAP SLD Model Data to /usr/sap/COA/SYS/global/sld
    Info: ***** End of File-System Deployment tc/sld/data *****
    Error: Aborted: development component 'tc/sld/data'/'sap.com'/'SAP AG'/'7.0014.20071029095152.0000'/'0':
    Deployment was not successful
    Info: Starting to save the repository
    Info: Finished saving the repository
    Info: OK: /usrsap/COA/DVEBMGS00/SDM/root/origin/sap.com/IAIKSecurityFS/SAP AG/0/7.0013.20070703111857.0000/tc_sec_java_crypto_fs_lib.sda
    Info: OK: /usrsap/COA/DVEBMGS00/SDM/root/origin/sap.com/com.sap.engine.deploy.online/SAP AG/0/7.0014.20071029094615.0000/sapj2eenginedeploy.sda
    I tryied to make cd /SAP AG and it does not work.
    This comes from sapinst. How can i solve this problem?
    Thank you!
    Mete

  • Error during the installation of oracle 11gxe

    Please, help me with the installation Oracle 11g. I have already installed it, but had to be removed. Now there is a need to install, but generates an error:
    Error number 0x80040702
    Description: Failed to load dll:orawsec11
    Setup will now terminated.

    Pl post exact version/edition of "Windows" and the contents of the XE install log file. How was the software deinstalled ?
    https://community.oracle.com/thread/2416536?tstart=0

  • Jave error during the installation of Oracle cleint

    I am trying to install Oracle 11g 64-bit client on my computer which is Window 7 64-bit. I am stucking at the step of Perform Prerequisite Checks. The installer was hanging forever. I froced to kill the installer from task manger. Then I got the error says Java (JM) 2 standard edition binary is not responding. I checked I have latest Java installed. And I also cleared the java cache. However, nothing makes it work. Can you please help?
    Thanks,
    Bing

    RBYL wrote:
    I am trying to install Oracle 11g 64-bit client on my computer which is Window 7 64-bit. I am stucking at the step of Perform Prerequisite Checks. The installer was hanging forever. I froced to kill the installer from task manger. Then I got the error says Java (JM) 2 standard edition binary is not responding. I checked I have latest Java installed. And I also cleared the java cache. However, nothing makes it work. Can you please help?
    Thanks,
    BingNo Oracle software is ever certified on any Windows Home Edition.
    consider to actually Read The Fine Manual; Installation Guide
    http://www.oracle.com/pls/db112/portal.portal_db?selected=11&frame=

  • Error during the installation of OIM

    Hello all,
    After install oracle database(10.2) , oracle application server 10.1.3, i started both and try to install OIM in my machine(Rhel4), but when it question to me about informations of my application server (Username[oc4jadmin],password,rmi port and the name of oc4j instance), the installation tell's me that my application server didn't started, but application server is up. Anyone know about this problem? Please help me?
    Thanks again.

    Check Metalink Note:466183.1, it should solve your problem
    Regards

Maybe you are looking for