An Error has occured when trasfering file with R/3 order

Hi Guys,
Could you please help me on this.
when saving the order in CRM my i got this error..when i go into error details.
"Inconsistent update flags (Notification E C( 004)"
what needs to be done to slove this error.
what are the possible reasons for thsease.
Thanks in advance,
Regards,
Shaik

Hi Shaik,
Please check the following notes. This will be of helpful.
1056966 C( 004: Inconsistent update flags                    
1125147 C( 004: Inconsistent update flags                    
1044818 BDOC status is 'yellow' - What should I do?          
718044 Composite SAP Note 'Inconsistent update flags'       
Thanks
Abishek

Similar Messages

  • Error has occurred when transferring f

    I have problems transferring files using creative media source. Whenever i attempt to do so, an error will immediately prompt out saying 'an error has occurred when transferring file'.
    I've also tried using windows explorer, and the error this time was 'cannot copy -song- the directory or file cannot be created'.
    Anybody knows what's the problem? I've tried reinstalling the software, but it's still the same. Please help.

    <FONT face=Helv size=2>
    Here is what you should do:
    - Download and install the latest Creative MediaSource Player/Organizer 3.30.2 from your product download site.
    - Download and install the latest Creative MuVo plugin .0.05 for Creative MediaSource from your product download site.
    Note: You should also update the firmware and driver (if any) of your MP3 player.

  • "An error has occurred saving the file because it could not be written to. Check ..."

    I have the familiar Mavericks issue of failing to save scanned files from my Mac:
     "An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only."
    As far as I can see, there has been no resolution to this issue, despite reassurances dating to last fall (2013).
    The support website acts funky, too, sending me around in circles when I try to download the drivers; it may be a Safari-only problem, but still, please fix your software!

    Hi,
    What is your printer model? what Mac OS X version?
    Have you tried scanning with Image Capture or Preview?
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967506&tmp_task=useCategory&cc=us&dlc=en&lc=e...
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Error message "A I/0-error has occured in the file" (free translated from Swedish). What to do?

    Hello!
    I keep getting the error message "A I/O-error has occured in the file" (free translated from Swedish) when I try to save changes to a .ai-file in Illustrator. I have never experienced that before. Does anyone have any idea what the problem is? Greatful for a quick answer, since I can't get any work done =/ Thank you in advance!

    alu,
    If it is a specific file, one thing often tried first is to create a new document and File>Place the corrupted one to see how much may be rescued that way (remember to tick Paste remembers Layers in the Layer palette flyout/dropdown first, and to untick it afterwards).
    Here is a website where you can see whether it can rescue the file, and if it can, you may pay for a subscription to have it done,
    http://www.recoverytoolbox.com/buy_illustrator.html
    and another similar website,
    http://markzware.com/adobe-software/fix-illustrator-file-unknown-error-occurred-pdf2dtp-fi le-recovery/
    As far as I remember, the former is for Win and the latter for Mac.
    Here are a few pages about struggling with it yourself:
    http://daxxter.wordpress.com/2009/04/16/how-to-recover-a-corrupted-illustrator-ai-file/
    http://helpx.adobe.com/illustrator/kb/troubleshoot-damaged-illustrator-files.html
    http://kb2.adobe.com/cps/500/cpsid_50032.html
    http://kb2.adobe.com/cps/500/cpsid_50031.html
    http://helpx.adobe.com/illustrator/kb/enable-content-recovery-mode-illustrator.html
    If it is not just a certain file, you may have a look at the list.
    The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
    1) Close down Illy and open again;
    2) Restart the computer (you may do that up to 3 times);
    3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
    4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
    5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
    Even more seriously, you may:
    6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
    http://www.adobe.com/support/contact/cscleanertool.html

  • A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)

    Hi guys
    i have problem when i run my windows application exe in windows server 2003
    it give me this exception error :
    I using sql server 2005
    visual studio 2008
    See the end of this message for details on invoking 
    just-in-time (JIT) debugging instead of this dialog box.
    ************** Exception Text **************
    System.Data.SqlClient.SqlException: A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)
       at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
       at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
       at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error)
       at System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj)
       at System.Data.SqlClient.TdsParserStateObject.ReadNetworkPacket()
       at System.Data.SqlClient.TdsParserStateObject.ReadBuffer()
       at System.Data.SqlClient.TdsParserStateObject.ReadByte()
       at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
       at System.Data.SqlClient.SqlDataReader.ConsumeMetaData()
       at System.Data.SqlClient.SqlDataReader.get_MetaData()
       at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
       at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
       at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
       at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
       at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
       at System.Data.SqlClient.SqlCommand.ExecuteDbDataReader(CommandBehavior behavior)
       at System.Data.Common.DbCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
       at System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
       at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
       at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet)
       at Sales.SalesClass.ShowSalesData(String ConnectionString)
       at Sales.Form1.timer1_Tick(Object sender, EventArgs e)
       at System.Windows.Forms.Timer.OnTick(EventArgs e)
       at System.Windows.Forms.Timer.TimerNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
    ************** Loaded Assemblies **************
    mscorlib
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
    Sales
        Assembly Version: 1.0.0.0
        Win32 Version: 1.0.0.0
        CodeBase: file:///C:/Documents%20and%20Settings/administrator.ALTAWIREADYMIX.000/Desktop/Sales.exe
    System.Windows.Forms
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
    System
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
    System.Drawing
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
    System.Configuration
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
    System.Xml
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
    System.Data
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
    System.Transactions
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Transactions/2.0.0.0__b77a5c561934e089/System.Transactions.dll
    System.EnterpriseServices
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.EnterpriseServices/2.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dll
    ************** JIT Debugging **************
    To enable just-in-time (JIT) debugging, the .config file for this
    application or computer (machine.config) must have the
    jitDebugging value set in the system.windows.forms section.
    The application must also be compiled with debugging
    enabled.
    For example:
    <configuration>
        <system.windows.forms jitDebugging="true" />
    </configuration>
    When JIT debugging is enabled, any unhandled exception
    will be sent to the JIT debugger registered on the computer
    rather than be handled by this dialog box.
    Why this error show and how to solve it
    if possible help me
    Why this exception show and how to solve it.
    Notes this exception not close my application and not affect in result show but i don't know why it show

    The problem can be caused by certain issues of long-running queries, which are reported improperly. Try increasing the timeout:
    http://support.microsoft.com/en-us/kb/555938

  • Tried all 6steps to Error Message: An error has occurred when attempting to change modules-Please help thx

    Tried all 6steps to Error Message: An error has occurred when attempting to change modules-Please help thx

    Hi, I¹ve been through it again to ensure I¹ve not forgot things. Completely
    removed Lightroom and all files I can find, etc and reloaded. Some tedious
    result. Step 6 is too time consuming at the moment for me, too many things
    on the go since I¹m about to go on holiday and on return I shall need
    Lightroom on this iMac. Any clues? This iMac had Mavericks from new,
    uploaded to Yosemite and then loaded Photoshop CC, Lightroom etc and get
    this damned problem.
    Reading around the web I¹m not the only one with this issue, to suggest a
    new user a/c is a soft option without resolving the issue.
    I hope an expert from Adobe can resolve this,
    Regards, George (retired IT Manager and IT Systems Project Manager)

  • A networking error has occurred: Cannot open file (-3001)

    When I attempt to use Software Update I get the following message: "A networking error has occurred: Cannot open file (-3001)"
    I am connected to the Internet, can connect with iDisk no problem. Manual downloading also works.
    Any ideas? Do I trash a corrupted file or what?
    Many thanks in advance.
    John
    Message was edited by: [email protected]

    I troubleshot this problem with a helpful Apple tech person who provided a workaround:
    Establish a second identity. After you log out of your own identity and into the second identity, you can successfully use software update. He had me trash a number of items deep within the system but nothing else worked. I also ran the Utilities program both off the system and the 10.5 disk with no effect.
    So far then, the only solution appears to be the second identity route or to manually download and apply updates. Quite a mystery I'd say!
    Any ideas out there?

  • HT201303 An unknown error has occurred when trying to sign in , and I know I putting in the correct info, this stinks can anyone help? Because apple isn't...

    An unknown error has occurred when trying to sign in , and I know I putting in the correct info, this stinks can anyone help? Because apple isn't...

    urgh... just noticed my previous post said i have mountain lion... i meant that i have snow leopard.  no idea why i messed that up!
    anyway, i just tried reinstalling snow leopard from the usb key that came with the computer. Then, I installed software updates until it told me there were no more updates. After that, I tried the app store again, and it still is giving me the unknown error. really irked by that. may have to take it back to the apple store yet again, to see if i can figure out why the app store won't work.

  • Error An unexpected error has occurred. Troubleshoot issues with Microsoft SharePoint Foundation. Correlation ID: 65ef1cb8-1cbf-40ee-b79b-05db15ca6dbb

    Hi, 
    Since I installed a few updates, that I can't access the sharepoint the same way. I always get errors when trying to access the majority of the pages.
    I already removed the update suggested on other threads (KB2844286), but everything remains the same.
    I always receive errors like this one:
    Error
    An unexpected error has occurred.
    Troubleshoot issues with Microsoft SharePoint Foundation.
    Correlation ID: 65ef1cb8-1cbf-40ee-b79b-05db15ca6dbb
    what can I do? The Sharepoint 2010 is located on a virtual partition of our server, running Windows Server 2008 Standard edition SP1.
    When I try to access administration tools it happens the same error, and I don't know what I can do more. 
    Please help me.
    best regards,
    Jorge Guimarães

    I followed some tips, to trace the error, allowing some trace debug, and got this:
    Server Error in '/' Application.
    Object reference not set to an instance of an object.
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. 
    Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.
    Source Error: 
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
    Stack Trace: 
    [NullReferenceException: Object reference not set to an instance of an object.]
    Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_ApplicationProperties() +134
    Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_PartitionIDs() +44
    Microsoft.Office.Server.Administration.UserProfileApplicationProxy.IsAvailable(SPServiceContext serviceContext) +329
    Microsoft.Office.Server.WebControls.MyLinksRibbon.get_PortalAvailable() +44
    Microsoft.Office.Server.WebControls.MyLinksRibbon.EnsureMySiteUrls() +60
    Microsoft.Office.Server.WebControls.MyLinksRibbon.get_PortalMySiteUrlAvailable() +15
    Microsoft.Office.Server.WebControls.MyLinksRibbon.OnLoad(EventArgs e) +91
    System.Web.UI.Control.LoadRecursive() +65
    System.Web.UI.Control.LoadRecursive() +190
    System.Web.UI.Control.LoadRecursive() +190
    System.Web.UI.Control.LoadRecursive() +190
    System.Web.UI.Control.LoadRecursive() +190
    System.Web.UI.Control.LoadRecursive() +190
    System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2427
    Version Information: Microsoft .NET Framework Version:2.0.50727.5477; ASP.NET Version:2.0.50727.5479

  • SharePoint 2013 - In document library, an unexpected error has occurred when a user clicks on ellipsis then "EDIT"

    Just as the title infers, I have a user who is experiencing an unexpected error when he clicks on "EDIT" after clicking on the ellipsis. Document in the Document library is an MS Word file.

    Hi,
    According to your post, my understanding is that an unexpected error has occurred when a user clicks on ellipsis then "EDIT".
    Please make sure he has the edit permission.
    Please make sure the Office 2013 is installed correctly on his computer.
    In addition, I recommend to use another brower to check whether it works.
    If so and the error message persists, please check the SharePoint ULS log to find more information about this error, the ULS
    log file is in the location: C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
    You can check the ULS log by the methods here:
    http://blog.credera.com/technology-insights/microsoft-solutions/troubleshooting-sharepoint-errors/
    More information:
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • HP scanning error: "An error has occurred saving the file because it could not be written to..

     HP scanning error: “An error has occurred saving the file because it could not be written to.  Check the properties for the file to make sure it is not read-only.” Dr. Google finds others with this problem.  Some claim that this is caused by an upgrade of Apple OS10 (which I did do).  One claims that HP has a "patch" for this problem. If I try to quit HP scan, it won't quit and freezes my computer. Here's the odd thing.  I have no problem scanning in a colored page from Scientific American either before or after this error (after rebooting each time), but simple black and white documents started just today to give the error message above.

    Thank you for the link however if I understood all of the instructions I would still be reluctant to try this on my own especially from a third unknown party where some of the information may be wrong and/or lost in translation. (Google translation at the end of this comment). The instructions say to uninstall the software.  So if I uninstall the original HP software am I using the original disk to reinstall and then personalize again?What about all of the updates since I originally installed the software? I found the Disk Utility but what is "gatekeeper"And I am using OS X 10.9.1 that is current because I downloaded the latest upgrade.  How would I reinstall it?And at what point do I go to the URL for the software drivers and the patch? This is just not practical for someone who is not proficient in troubleshooting applications.I switched to Apple because I don't want to have to go through this kind of process, take my time to fix the application and potentially mess up my system .  WHy should I have to try to figure out how to retrieve the normal function in this case, of my All-In-One. If it is so simple why can't HP develop the fix and make it available? Unfortunately right now I have to find an alternative to scan some important business documents that are due today. Since I am using an older printer by technology standards even though it is working fine I may be looking for a replacement and HP may no longer be at the top of my list given that the problem appears to affect other HP models. No need to answer my questions,  I'm not going to try this fix based on these instructions. Please HP provide a fix for this problem with the scanner and MAC OS X 10.9.1 compatibility! Translation of the information on the suggested link: We hereby send you a guide that should help you in solving the problem .Please carry the following: 1 Please uninstall the software again .Goto -> Programs - > Hewlett -Packard - > HP Uninstaller 2 Please repair permissions on your Mac .Go -> Utilities -> Disk Utility - > Repair Disk Permissions . 3 Please disable ' gatekeeper ' on your Mac . 4 Reinstall the full software for MAC 10.6 and patch for 10.7 / 10.8 / 10.9. HP Scanjet Software and Drivers for Mac OS X v10.6 features :http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/ ? sp4ts.oid = 457 534 & spf_p.tpst = swdMain & spf_p.prp_swdMain = wsrp - navigationalState 3Di % dx % 253D % 257CswItem % 253Dsj_78355_5 % 257CswEnvOID % 253D219 % 257CitemLocale % 253D % 253D % % 257Cs wLang 257Cmode % 253D % 257Caction % 253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken
    Scanjet software patch to Use OS X 10.6 Software and Driver on OS X:http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/ ? sp4ts.oid = 457 534 & spf_p.tpst = swdMain & spf_p.prp_swdMain = wsrp - navigationalState 3Di % dx % 253D % 257CswItem % 253Dcs_97791_1 % 257CswEnvOID % 253D219 % 257CitemLocale % 253D % 253D % % 257Cs wLang 257Cmode % 253D % 257Caction % 253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken    

  • This is an error from my HP scanner. How can I fix the problem? An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only.

    I recently uploaded the Maverick operating system. I wanted to scan some things on my HP Printer/Scanner and could not . This is the error message I received: An  error has occurred saving the file because it could not be written to.   Check the properties for the file to make sure it is not read-only. I am a novice with the computer and have no one to help. I hope someone knows an easy fix.
    Thank you

    This worked for me:
    "Although it is not a 'fix' for the HP issue, I did find a workaround that helped me. In the Preferences Panel in MacOS X you can pull up the Printer/Scanner preferences and scan directly from OS X. I'd not known of this prior to posting here and it worked like a charm."
    "Of course, HP should still update their software, but it's good to know that Apple has it covered for them."
    I found it here:
    http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/MAVERICKS-WONT-SCAN-HP-C3 09A/td-p/3052105

  • An error has occurred saving the file because it could not be written to.

    An error has occurred saving the file because it could not be written to.  Check the properties for the file to make sure it is not read-only.  
    This error message comes up every time I try to save a scanned document to my mac 10.9 .4 . I have reset the software for my HP C5180.All in one. I have not had te problem before, just recently following some upgrades ....any suggestions how to fix this, on reading forums it seems its a common problem.. not good .
    Thanks

    Hi @annie59,
    Welcome to the HP Forums!
    I understand that you cannot scan with your HP Photosmart c5180 on Mac 10.9.4. I am happy to help you with this scanning issue!
    Please try the following:
    Reset the printing system. OS X Mavericks: Reset the printing system.
    Verify and repair disk permissions. Disk Utility 12.x: Repair disk permissions.
    See this installation guide. OS X v10.9 Mavericks: Installing and Using the Printer on a Mac.
    See this post, Re: iMac OS X 10.9.3 Scan to iMac Driver for HP OfficeJet Pro 8500A A910a does not seem to exist, by my colleague @Sunshyn2005. 
    Hope this information helps, and thank you for posting!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • I get "an error has occured" when trying to download from the AppStore.  I can not re-download as the button is not active.

    I encountered the response "an error has occured" when I downloaded Maverick X from the App Store.  I can not try to re-download as the download button is not active.  I have tried rebooting and to get the download from apple.com but it keeps redirecting to the App Store.
    Suggestions?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Server Error has occurred when loading profile manager page

    I am getting message saying Server Error has occurred when I login into profile manager web page. How can i solve this issue. I am using Mavericks Server.

    PM Logs
    2014-03-07 00:15:27 NZDTLOG:  statement: CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322439-2" ("value" varchar UNIQUE)
    2014-03-07 00:15:27 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 00:15:27 NZDTSTATEMENT:  CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322439-2" ("value" varchar UNIQUE)
    2014-03-07 01:15:27 NZDTLOG:  statement: CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322441-2" ("value" varchar UNIQUE)
    2014-03-07 01:15:27 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 01:15:27 NZDTSTATEMENT:  CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322441-2" ("value" varchar UNIQUE)
    2014-03-07 02:15:27 NZDTLOG:  statement: CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322443-2" ("value" varchar UNIQUE)
    2014-03-07 02:15:27 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 02:15:27 NZDTSTATEMENT:  CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322443-2" ("value" varchar UNIQUE)
    2014-03-07 03:15:27 NZDTLOG:  statement: CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322445-2" ("value" varchar UNIQUE)
    2014-03-07 03:15:27 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 03:15:27 NZDTSTATEMENT:  CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322445-2" ("value" varchar UNIQUE)
    2014-03-07 04:15:27 NZDTLOG:  statement: CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322447-2" ("value" varchar UNIQUE)
    2014-03-07 04:15:27 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 04:15:27 NZDTSTATEMENT:  CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322447-2" ("value" varchar UNIQUE)
    2014-03-07 05:15:27 NZDTLOG:  statement: CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322449-2" ("value" varchar UNIQUE)
    2014-03-07 05:15:27 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 05:15:27 NZDTSTATEMENT:  CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322449-2" ("value" varchar UNIQUE)
    2014-03-07 06:15:28 NZDTLOG:  statement: CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322451-2" ("value" varchar UNIQUE)
    2014-03-07 06:15:28 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 06:15:28 NZDTSTATEMENT:  CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322451-2" ("value" varchar UNIQUE)
    2014-03-07 07:15:28 NZDTLOG:  statement: CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322453-2" ("value" varchar UNIQUE)
    2014-03-07 07:15:28 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 07:15:28 NZDTSTATEMENT:  CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322453-2" ("value" varchar UNIQUE)
    2014-03-07 08:15:28 NZDTLOG:  statement: CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322455-2" ("value" varchar UNIQUE)
    2014-03-07 08:15:28 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 08:15:28 NZDTSTATEMENT:  CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322455-2" ("value" varchar UNIQUE)
    2014-03-07 09:15:28 NZDTLOG:  statement: CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322457-2" ("value" varchar UNIQUE)
    2014-03-07 09:15:28 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 09:15:28 NZDTSTATEMENT:  CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322457-2" ("value" varchar UNIQUE)
    2014-03-07 10:15:28 NZDTLOG:  statement: CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322459-2" ("value" varchar UNIQUE)
    2014-03-07 10:15:28 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 10:15:28 NZDTSTATEMENT:  CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322459-2" ("value" varchar UNIQUE)
    2014-03-07 10:18:03 NZDTLOG:  statement: CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322461-2" ("value" varchar UNIQUE)
    2014-03-07 10:18:03 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 10:18:03 NZDTSTATEMENT:  CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322461-2" ("value" varchar UNIQUE)
    2014-03-07 11:15:29 NZDTLOG:  statement: CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322463-2" ("value" varchar UNIQUE)
    2014-03-07 11:15:29 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 11:15:29 NZDTSTATEMENT:  CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322463-2" ("value" varchar UNIQUE)
    2014-03-07 12:15:29 NZDTLOG:  statement: CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322465-2" ("value" varchar UNIQUE)
    2014-03-07 12:15:29 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 12:15:29 NZDTSTATEMENT:  CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322465-2" ("value" varchar UNIQUE)
    2014-03-07 13:15:29 NZDTLOG:  statement: CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322467-2" ("value" varchar UNIQUE)
    2014-03-07 13:15:29 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 13:15:29 NZDTSTATEMENT:  CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322467-2" ("value" varchar UNIQUE)
    2014-03-07 14:15:29 NZDTLOG:  statement: CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322469-2" ("value" varchar UNIQUE)
    2014-03-07 14:15:29 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 14:15:29 NZDTSTATEMENT:  CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322469-2" ("value" varchar UNIQUE)
    2014-03-07 15:05:34 NZDTLOG:  statement: CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322472-2" ("value" varchar UNIQUE)
    2014-03-07 15:05:34 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:05:34 NZDTSTATEMENT:  CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322472-2" ("value" varchar UNIQUE)
    2014-03-07 15:06:11 NZDTLOG:  statement: CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322474-2" ("value" varchar UNIQUE)
    2014-03-07 15:06:11 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:06:11 NZDTSTATEMENT:  CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322474-2" ("value" varchar UNIQUE)
    2014-03-07 15:06:45 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:06:45 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE IF NOT EXISTS temp_updated_target_tasks (
              LIKE view_target_tasks
              ) ON COMMIT DELETE ROWS"
              PL/pgSQL function dm_prepare_updated_target_tasks(bigint,bigint[]) line 6 at SQL statement
    2014-03-07 15:06:45 NZDTSTATEMENT:  SELECT dm_prepare_updated_target_tasks(4322480)
    2014-03-07 15:06:53 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:06:53 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE IF NOT EXISTS temp_updated_target_tasks (
              LIKE view_target_tasks
              ) ON COMMIT DELETE ROWS"
              PL/pgSQL function dm_prepare_updated_target_tasks(bigint,bigint[]) line 6 at SQL statement
    2014-03-07 15:06:53 NZDTSTATEMENT:  SELECT dm_prepare_updated_target_tasks(4322482)
    2014-03-07 15:07:56 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:07:56 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE IF NOT EXISTS temp_updated_target_tasks (
              LIKE view_target_tasks
              ) ON COMMIT DELETE ROWS"
              PL/pgSQL function dm_prepare_updated_target_tasks(bigint,bigint[]) line 6 at SQL statement
    2014-03-07 15:07:56 NZDTSTATEMENT:  SELECT dm_prepare_updated_target_tasks(4322485)
    2014-03-07 15:08:04 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:08:04 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE IF NOT EXISTS temp_updated_target_tasks (
              LIKE view_target_tasks
              ) ON COMMIT DELETE ROWS"
              PL/pgSQL function dm_prepare_updated_target_tasks(bigint,bigint[]) line 6 at SQL statement
    2014-03-07 15:08:04 NZDTSTATEMENT:  SELECT dm_prepare_updated_target_tasks(4322489)
    2014-03-07 15:09:06 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:09:06 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE IF NOT EXISTS temp_updated_target_tasks (
              LIKE view_target_tasks
              ) ON COMMIT DELETE ROWS"
              PL/pgSQL function dm_prepare_updated_target_tasks(bigint,bigint[]) line 6 at SQL statement
    2014-03-07 15:09:06 NZDTSTATEMENT:  SELECT dm_prepare_updated_target_tasks(4322495)
    2014-03-07 15:09:15 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:09:15 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE IF NOT EXISTS temp_updated_target_tasks (
              LIKE view_target_tasks
              ) ON COMMIT DELETE ROWS"
              PL/pgSQL function dm_prepare_updated_target_tasks(bigint,bigint[]) line 6 at SQL statement
    2014-03-07 15:09:15 NZDTSTATEMENT:  SELECT dm_prepare_updated_target_tasks(4322497)
    2014-03-07 15:09:19 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:09:19 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE IF NOT EXISTS temp_updated_target_tasks (
              LIKE view_target_tasks
              ) ON COMMIT DELETE ROWS"
              PL/pgSQL function dm_prepare_updated_target_tasks(bigint,bigint[]) line 6 at SQL statement
    2014-03-07 15:09:19 NZDTSTATEMENT:  SELECT dm_prepare_updated_target_tasks(4322500)
    2014-03-07 15:09:28 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:09:28 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE IF NOT EXISTS temp_updated_target_tasks (
              LIKE view_target_tasks
              ) ON COMMIT DELETE ROWS"
              PL/pgSQL function dm_prepare_updated_target_tasks(bigint,bigint[]) line 6 at SQL statement
    2014-03-07 15:09:28 NZDTSTATEMENT:  SELECT dm_prepare_updated_target_tasks(4322502)
    2014-03-07 15:09:43 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:09:43 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE IF NOT EXISTS temp_updated_target_tasks (
              LIKE view_target_tasks
              ) ON COMMIT DELETE ROWS"
              PL/pgSQL function dm_prepare_updated_target_tasks(bigint,bigint[]) line 6 at SQL statement
    2014-03-07 15:09:43 NZDTSTATEMENT:  SELECT dm_prepare_updated_target_tasks(4322504)
    2014-03-07 15:09:48 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:09:48 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE IF NOT EXISTS temp_updated_target_tasks (
              LIKE view_target_tasks
              ) ON COMMIT DELETE ROWS"
              PL/pgSQL function dm_prepare_updated_target_tasks(bigint,bigint[]) line 6 at SQL statement
    2014-03-07 15:09:48 NZDTSTATEMENT:  SELECT dm_prepare_updated_target_tasks(4322506)
    2014-03-07 15:09:52 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:09:52 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE IF NOT EXISTS temp_updated_target_tasks (
              LIKE view_target_tasks
              ) ON COMMIT DELETE ROWS"
              PL/pgSQL function dm_prepare_updated_target_tasks(bigint,bigint[]) line 6 at SQL statement
    2014-03-07 15:09:52 NZDTSTATEMENT:  SELECT dm_prepare_updated_target_tasks(4322508)
    2014-03-07 15:13:59 NZDTLOG:  statement: CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322519-2" ("value" varchar UNIQUE)
    2014-03-07 15:13:59 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:13:59 NZDTSTATEMENT:  CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322519-2" ("value" varchar UNIQUE)
    2014-03-07 15:14:11 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:14:11 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE IF NOT EXISTS temp_updated_target_tasks (
              LIKE view_target_tasks
              ) ON COMMIT DELETE ROWS"
              PL/pgSQL function dm_prepare_updated_target_tasks(bigint,bigint[]) line 6 at SQL statement
    2014-03-07 15:14:11 NZDTSTATEMENT:  SELECT dm_prepare_updated_target_tasks(4322522)
    2014-03-07 15:15:40 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:15:40 NZDTLOG:  connection authorized: user=_devicemgr database=template1
    2014-03-07 15:15:41 NZDTLOG:  statement: CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322586-2" ("value" varchar UNIQUE)
    2014-03-07 15:15:41 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:15:41 NZDTSTATEMENT:  CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322586-2" ("value" varchar UNIQUE)
    2014-03-07 15:15:44 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:15:44 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:15:44 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:15:44 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:15:44 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:15:44 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:15:44 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:15:44 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:15:44 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:15:44 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:15:44 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:15:44 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:15:44 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:15:44 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:15:44 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:15:44 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:15:44 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:15:44 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:15:44 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:15:44 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:15:44 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:15:44 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:16:10 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:16:10 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE IF NOT EXISTS temp_updated_target_tasks (
              LIKE view_target_tasks
              ) ON COMMIT DELETE ROWS"
              PL/pgSQL function dm_prepare_updated_target_tasks(bigint,bigint[]) line 6 at SQL statement
    2014-03-07 15:16:10 NZDTSTATEMENT:  SELECT dm_prepare_updated_target_tasks(4322599)
    2014-03-07 15:16:20 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_9"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:16:47 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:16:47 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:16:52 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:16:52 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:16:53 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:16:53 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE _affected_profiles ON COMMIT DROP AS
              SELECT DISTINCT tp.profile_id
              FROM view_truth_profiles AS tp
              WHERE tp.mdm_target_id = after.id
              AND (tp.device_substitution_keys & fn.mask) <> 0"
              PL/pgSQL function dm_deferred_update_profiles_by_device_substitutions(devices,devices) line 40 at SQL statement
              SQL statement "SELECT dm_deferred_update_profiles_by_device_substitutions(OLD, NEW)"
              PL/pgSQL function _dm_after_device_modify() line 37 at PERFORM
    2014-03-07 15:16:53 NZDTSTATEMENT:  UPDATE "devices" SET ("updated_at","active_checkin_token","udid") = (dm_current_timestamp(),$1,$2) WHERE id = $3
    2014-03-07 15:17:01 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:17:01 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:17:01 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:17:01 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE _affected_profiles ON COMMIT DROP AS
              SELECT DISTINCT tp.profile_id
              FROM view_truth_profiles AS tp
              WHERE tp.mdm_target_id = after.id
              AND (tp.device_substitution_keys & fn.mask) <> 0"
              PL/pgSQL function dm_deferred_update_profiles_by_device_substitutions(devices,devices) line 40 at SQL statement
              SQL statement "SELECT dm_deferred_update_profiles_by_device_substitutions(OLD, NEW)"
              PL/pgSQL function _dm_after_device_modify() line 37 at PERFORM
    2014-03-07 15:17:01 NZDTSTATEMENT:  UPDATE "devices" SET ("updated_at","active_checkin_token","udid") = (dm_current_timestamp(),$1,$2) WHERE id = $3
    2014-03-07 15:17:14 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:17:14 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:17:14 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:17:14 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE _affected_profiles ON COMMIT DROP AS
              SELECT DISTINCT tp.profile_id
              FROM view_truth_profiles AS tp
              WHERE tp.mdm_target_id = after.id
              AND (tp.device_substitution_keys & fn.mask) <> 0"
              PL/pgSQL function dm_deferred_update_profiles_by_device_substitutions(devices,devices) line 40 at SQL statement
              SQL statement "SELECT dm_deferred_update_profiles_by_device_substitutions(OLD, NEW)"
              PL/pgSQL function _dm_after_device_modify() line 37 at PERFORM
    2014-03-07 15:17:14 NZDTSTATEMENT:  UPDATE "devices" SET ("updated_at","active_checkin_token","udid") = (dm_current_timestamp(),$1,$2) WHERE id = $3
    2014-03-07 15:17:20 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_9"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:17:26 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:17:26 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:17:26 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:17:26 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE _affected_profiles ON COMMIT DROP AS
              SELECT DISTINCT tp.profile_id
              FROM view_truth_profiles AS tp
              WHERE tp.mdm_target_id = after.id
              AND (tp.device_substitution_keys & fn.mask) <> 0"
              PL/pgSQL function dm_deferred_update_profiles_by_device_substitutions(devices,devices) line 40 at SQL statement
              SQL statement "SELECT dm_deferred_update_profiles_by_device_substitutions(OLD, NEW)"
              PL/pgSQL function _dm_after_device_modify() line 37 at PERFORM
    2014-03-07 15:17:26 NZDTSTATEMENT:  UPDATE "devices" SET ("updated_at","active_checkin_token","udid") = (dm_current_timestamp(),$1,$2) WHERE id = $3
    2014-03-07 15:17:31 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:17:31 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:17:31 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:17:31 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE _affected_profiles ON COMMIT DROP AS
              SELECT DISTINCT tp.profile_id
              FROM view_truth_profiles AS tp
              WHERE tp.mdm_target_id = after.id
              AND (tp.device_substitution_keys & fn.mask) <> 0"
              PL/pgSQL function dm_deferred_update_profiles_by_device_substitutions(devices,devices) line 40 at SQL statement
              SQL statement "SELECT dm_deferred_update_profiles_by_device_substitutions(OLD, NEW)"
              PL/pgSQL function _dm_after_device_modify() line 37 at PERFORM
    2014-03-07 15:17:31 NZDTSTATEMENT:  UPDATE "devices" SET ("updated_at","active_checkin_token","udid") = (dm_current_timestamp(),$1,$2) WHERE id = $3
    2014-03-07 15:18:00 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:18:00 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:18:01 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:18:01 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE _affected_profiles ON COMMIT DROP AS
              SELECT DISTINCT tp.profile_id
              FROM view_truth_profiles AS tp
              WHERE tp.mdm_target_id = after.id
              AND (tp.device_substitution_keys & fn.mask) <> 0"
              PL/pgSQL function dm_deferred_update_profiles_by_device_substitutions(devices,devices) line 40 at SQL statement
              SQL statement "SELECT dm_deferred_update_profiles_by_device_substitutions(OLD, NEW)"
              PL/pgSQL function _dm_after_device_modify() line 37 at PERFORM
    2014-03-07 15:18:01 NZDTSTATEMENT:  UPDATE "devices" SET ("updated_at","active_checkin_token","udid") = (dm_current_timestamp(),$1,$2) WHERE id = $3
    2014-03-07 15:18:20 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_9"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:19:20 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_9"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:20:16 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:20:16 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE IF NOT EXISTS temp_updated_target_tasks (
              LIKE view_target_tasks
              ) ON COMMIT DELETE ROWS"
              PL/pgSQL function dm_prepare_updated_target_tasks(bigint,bigint[]) line 6 at SQL statement
    2014-03-07 15:20:16 NZDTSTATEMENT:  SELECT dm_prepare_updated_target_tasks(4322639)
    2014-03-07 15:20:20 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_9"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:20:26 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:20:26 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE IF NOT EXISTS temp_updated_target_tasks (
              LIKE view_target_tasks
              ) ON COMMIT DELETE ROWS"
              PL/pgSQL function dm_prepare_updated_target_tasks(bigint,bigint[]) line 6 at SQL statement
    2014-03-07 15:20:26 NZDTSTATEMENT:  SELECT dm_prepare_updated_target_tasks(4322641)
    2014-03-07 15:21:11 NZDTLOG:  statement: ALTER TABLE "widgets" ENABLE TRIGGER USER
    2014-03-07 15:21:11 NZDTLOG:  statement: ALTER TABLE "preference_panes" ENABLE TRIGGER USER
    2014-03-07 15:21:11 NZDTLOG:  statement: ALTER TABLE "printers" ENABLE TRIGGER USER
    2014-03-07 15:21:11 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:21:11 NZDTLOG:  connection authorized: user=_devicemgr database=postgres
    2014-03-07 15:21:11 NZDTLOG:  statement: ALTER TABLE "installed_applications" ENABLE TRIGGER USER
    2014-03-07 15:21:11 NZDTLOG:  statement: ALTER TABLE "users" ENABLE TRIGGER USER
    2014-03-07 15:21:11 NZDTLOG:  statement: ALTER TABLE "profiles" ENABLE TRIGGER USER
    2014-03-07 15:21:12 NZDTLOG:  statement: ALTER TABLE "dm_schema_information" ENABLE TRIGGER USER
    2014-03-07 15:21:12 NZDTLOG:  statement: ALTER TABLE "provisioning_profiles" ENABLE TRIGGER USER
    2014-03-07 15:21:12 NZDTLOG:  statement: ALTER TABLE "od_nodes" ENABLE TRIGGER USER
    2014-03-07 15:21:12 NZDTLOG:  statement: ALTER TABLE "user_groups" ENABLE TRIGGER USER
    2014-03-07 15:21:12 NZDTLOG:  statement: ALTER TABLE "network_lab_sessions" ENABLE TRIGGER USER
    2014-03-07 15:21:12 NZDTLOG:  statement: ALTER TABLE "enterprise_apps" ENABLE TRIGGER USER
    2014-03-07 15:21:12 NZDTLOG:  statement: ALTER TABLE "library_items" ENABLE TRIGGER USER
    2014-03-07 15:21:13 NZDTLOG:  statement: ALTER TABLE "data_files" ENABLE TRIGGER USER
    2014-03-07 15:21:13 NZDTLOG:  statement: ALTER TABLE "knob_sets" ENABLE TRIGGER USER
    2014-03-07 15:21:13 NZDTLOG:  statement: ALTER TABLE "od_library_items" ENABLE TRIGGER USER
    2014-03-07 15:21:13 NZDTLOG:  statement: ALTER TABLE "work_tasks" ENABLE TRIGGER USER
    2014-03-07 15:21:13 NZDTLOG:  statement: ALTER TABLE "user_tasks" ENABLE TRIGGER USER
    2014-03-07 15:21:13 NZDTLOG:  statement: ALTER TABLE "mdm_targets" ENABLE TRIGGER USER
    2014-03-07 15:21:13 NZDTLOG:  statement: ALTER TABLE "auto_join_profiles" ENABLE TRIGGER USER
    2014-03-07 15:21:13 NZDTLOG:  statement: ALTER TABLE "asset_metadata" ENABLE TRIGGER USER
    2014-03-07 15:21:13 NZDTLOG:  statement: ALTER TABLE "db_notifications" ENABLE TRIGGER USER
    2014-03-07 15:21:13 NZDTLOG:  statement: ALTER TABLE "internal_tasks" ENABLE TRIGGER USER
    2014-03-07 15:21:13 NZDTLOG:  statement: ALTER TABLE "library_item_tasks" ENABLE TRIGGER USER
    2014-03-07 15:21:13 NZDTLOG:  statement: ALTER TABLE "vpp_licenses" ENABLE TRIGGER USER
    2014-03-07 15:21:13 NZDTLOG:  statement: ALTER TABLE "settings" ENABLE TRIGGER USER
    2014-03-07 15:21:14 NZDTFATAL:  terminating connection due to administrator command
    2014-03-07 15:21:14 NZDTFATAL:  terminating connection due to administrator command
    2014-03-07 15:21:14 NZDTFATAL:  terminating connection due to administrator command
    2014-03-07 15:21:14 NZDTFATAL:  terminating connection due to administrator command
    2014-03-07 15:21:14 NZDTFATAL:  terminating connection due to administrator command
    2014-03-07 15:21:14 NZDTLOG:  statement: ALTER TABLE "media" ENABLE TRIGGER USER
    2014-03-07 15:21:14 NZDTLOG:  received smart shutdown request
    2014-03-07 15:21:14 NZDTLOG:  autovacuum launcher shutting down
    2014-03-07 15:21:14 NZDTLOG:  statement: ALTER TABLE "device_groups" ENABLE TRIGGER USER
    2014-03-07 15:21:14 NZDTLOG:  statement: ALTER TABLE "lab_sessions" ENABLE TRIGGER USER
    2014-03-07 15:21:14 NZDTLOG:  statement: ALTER TABLE "owner_lab_sessions" ENABLE TRIGGER USER
    2014-03-07 15:21:14 NZDTLOG:  statement: ALTER TABLE "library_item_metadata" ENABLE TRIGGER USER
    2014-03-07 15:21:14 NZDTLOG:  statement: ALTER TABLE "system_applications" ENABLE TRIGGER USER
    2014-03-07 15:21:14 NZDTLOG:  statement: ALTER TABLE "completed_tasks" ENABLE TRIGGER USER
    2014-03-07 15:21:14 NZDTLOG:  statement: ALTER TABLE "dynamic_attributes_defaults" ENABLE TRIGGER USER
    2014-03-07 15:21:14 NZDTLOG:  statement: ALTER TABLE "mdm_tasks" ENABLE TRIGGER USER
    2014-03-07 15:21:14 NZDTLOG:  statement: ALTER TABLE "assets" ENABLE TRIGGER USER
    2014-03-07 15:21:14 NZDTLOG:  statement: ALTER TABLE "devices" ENABLE TRIGGER USER
    2014-03-07 15:21:14 NZDTLOG:  statement: ALTER TABLE "vpp_products" ENABLE TRIGGER USER
    2014-03-07 15:21:14 NZDTLOG:  statement: ALTER TABLE "library_items_assets" ENABLE TRIGGER USER
    2014-03-07 15:21:14 NZDTLOG:  statement: ALTER TABLE "its_accounts" ENABLE TRIGGER USER
    2014-03-07 15:21:14 NZDTLOG:  statement: ALTER TABLE "profile_substitution_caches" ENABLE TRIGGER USER
    2014-03-07 15:21:14 NZDTLOG:  shutting down
    '/Library/Server/ProfileManager/Data/PostgreSQL/pg_xlog/0000000100000001000000D0 ' ... '/Library/Server/ProfileManager/Data/backup/0000000100000001000000D0'
    2014-03-07 15:21:14 NZDTLOG:  database system is shut down
    '/Library/Server/ProfileManager/Data/PostgreSQL/pg_xlog/0000000100000001000000D0 ' --> '/Library/Server/ProfileManager/Data/backup/0000000100000001000000D0'
    2014-03-07 15:22:15 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:22:15 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:22:15 NZDTLOG:  database system was shut down at 2014-03-07 15:21:14 NZDT
    2014-03-07 15:22:15 NZDTFATAL:  the database system is starting up
    2014-03-07 15:22:15 NZDTFATAL:  the database system is starting up
    2014-03-07 15:22:15 NZDTLOG:  autovacuum launcher started
    2014-03-07 15:22:15 NZDTLOG:  database system is ready to accept connections
    2014-03-07 15:22:15 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:22:15 NZDTLOG:  connection authorized: user=_devicemgr database=template1
    2014-03-07 15:22:15 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:22:15 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:22:16 NZDTLOG:  statement: ALTER TABLE "widgets" ENABLE TRIGGER USER
    2014-03-07 15:22:16 NZDTLOG:  statement: ALTER TABLE "preference_panes" ENABLE TRIGGER USER
    2014-03-07 15:22:17 NZDTLOG:  statement: ALTER TABLE "printers" ENABLE TRIGGER USER
    2014-03-07 15:22:17 NZDTLOG:  statement: ALTER TABLE "installed_applications" ENABLE TRIGGER USER
    2014-03-07 15:22:17 NZDTLOG:  statement: ALTER TABLE "users" ENABLE TRIGGER USER
    2014-03-07 15:22:17 NZDTLOG:  statement: ALTER TABLE "profiles" ENABLE TRIGGER USER
    2014-03-07 15:22:18 NZDTLOG:  statement: ALTER TABLE "dm_schema_information" ENABLE TRIGGER USER
    2014-03-07 15:22:18 NZDTLOG:  statement: ALTER TABLE "provisioning_profiles" ENABLE TRIGGER USER
    2014-03-07 15:22:18 NZDTLOG:  statement: ALTER TABLE "od_nodes" ENABLE TRIGGER USER
    2014-03-07 15:22:18 NZDTLOG:  statement: ALTER TABLE "user_groups" ENABLE TRIGGER USER
    2014-03-07 15:22:19 NZDTLOG:  statement: ALTER TABLE "network_lab_sessions" ENABLE TRIGGER USER
    2014-03-07 15:22:19 NZDTLOG:  statement: ALTER TABLE "enterprise_apps" ENABLE TRIGGER USER
    2014-03-07 15:22:19 NZDTLOG:  statement: ALTER TABLE "library_items" ENABLE TRIGGER USER
    2014-03-07 15:22:19 NZDTLOG:  statement: ALTER TABLE "data_files" ENABLE TRIGGER USER
    2014-03-07 15:22:20 NZDTLOG:  statement: ALTER TABLE "knob_sets" ENABLE TRIGGER USER
    2014-03-07 15:22:20 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:22:20 NZDTLOG:  replication connection authorized: user=_devicemgr
    2014-03-07 15:22:20 NZDTLOG:  statement: ALTER TABLE "od_library_items" ENABLE TRIGGER USER
    2014-03-07 15:22:20 NZDTLOG:  statement: ALTER TABLE "work_tasks" ENABLE TRIGGER USER
    2014-03-07 15:22:20 NZDTLOG:  statement: ALTER TABLE "user_tasks" ENABLE TRIGGER USER
    2014-03-07 15:22:20 NZDTLOG:  statement: ALTER TABLE "mdm_targets" ENABLE TRIGGER USER
    2014-03-07 15:22:21 NZDTLOG:  statement: ALTER TABLE "asset_metadata" ENABLE TRIGGER USER
    2014-03-07 15:22:21 NZDTLOG:  statement: ALTER TABLE "auto_join_profiles" ENABLE TRIGGER USER
    2014-03-07 15:22:21 NZDTLOG:  statement: ALTER TABLE "db_notifications" ENABLE TRIGGER USER
    2014-03-07 15:22:21 NZDTLOG:  statement: ALTER TABLE "internal_tasks" ENABLE TRIGGER USER
    2014-03-07 15:22:22 NZDTLOG:  statement: ALTER TABLE "library_item_tasks" ENABLE TRIGGER USER
    2014-03-07 15:22:22 NZDTLOG:  statement: ALTER TABLE "vpp_licenses" ENABLE TRIGGER USER
    2014-03-07 15:22:22 NZDTLOG:  statement: ALTER TABLE "settings" ENABLE TRIGGER USER
    2014-03-07 15:22:22 NZDTLOG:  statement: ALTER TABLE "device_groups" ENABLE TRIGGER USER
    2014-03-07 15:22:22 NZDTLOG:  statement: ALTER TABLE "media" ENABLE TRIGGER USER
    2014-03-07 15:22:22 NZDTLOG:  statement: ALTER TABLE "lab_sessions" ENABLE TRIGGER USER
    2014-03-07 15:22:22 NZDTLOG:  statement: ALTER TABLE "owner_lab_sessions" ENABLE TRIGGER USER
    2014-03-07 15:22:23 NZDTLOG:  statement: ALTER TABLE "library_item_metadata" ENABLE TRIGGER USER
    2014-03-07 15:22:23 NZDTLOG:  statement: ALTER TABLE "dynamic_attributes_defaults" ENABLE TRIGGER USER
    2014-03-07 15:22:23 NZDTLOG:  statement: ALTER TABLE "mdm_tasks" ENABLE TRIGGER USER
    2014-03-07 15:22:23 NZDTLOG:  statement: ALTER TABLE "completed_tasks" ENABLE TRIGGER USER
    2014-03-07 15:22:23 NZDTLOG:  statement: ALTER TABLE "system_applications" ENABLE TRIGGER USER
    2014-03-07 15:22:23 NZDTLOG:  statement: ALTER TABLE "assets" ENABLE TRIGGER USER
    2014-03-07 15:22:23 NZDTLOG:  statement: ALTER TABLE "devices" ENABLE TRIGGER USER
    2014-03-07 15:22:23 NZDTLOG:  statement: ALTER TABLE "vpp_products" ENABLE TRIGGER USER
    2014-03-07 15:22:24 NZDTLOG:  statement: ALTER TABLE "library_items_assets" ENABLE TRIGGER USER
    2014-03-07 15:22:24 NZDTLOG:  statement: ALTER TABLE "its_accounts" ENABLE TRIGGER USER
    2014-03-07 15:22:24 NZDTLOG:  statement: ALTER TABLE "profile_substitution_caches" ENABLE TRIGGER USER
    2014-03-07 15:22:24 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:22:24 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:22:24 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:22:24 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:22:24 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:22:24 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:22:24 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:22:24 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:22:24 NZDTLOG:  statement: CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322725-2" ("value" varchar UNIQUE)
    2014-03-07 15:22:25 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:22:25 NZDTSTATEMENT:  CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322725-2" ("value" varchar UNIQUE)
    2014-03-07 15:22:31 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:22:31 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:22:31 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:22:31 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:22:31 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:22:31 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:22:31 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:22:31 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:22:31 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:22:31 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:22:31 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:22:31 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:22:31 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:22:31 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:22:31 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:22:31 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:22:31 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:22:31 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:22:31 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:22:31 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:22:35 NZDTLOG:  statement: CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322728-2" ("value" varchar UNIQUE)
    2014-03-07 15:22:35 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:22:35 NZDTSTATEMENT:  CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322728-2" ("value" varchar UNIQUE)
    2014-03-07 15:22:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_18"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:23:11 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:23:11 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:23:11 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:23:11 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:23:11 NZDTLOG:  statement: CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322766-2" ("value" varchar UNIQUE)
    2014-03-07 15:23:12 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:23:12 NZDTSTATEMENT:  CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322766-2" ("value" varchar UNIQUE)
    2014-03-07 15:24:14 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:24:14 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE IF NOT EXISTS temp_updated_target_tasks (
              LIKE view_target_tasks
              ) ON COMMIT DELETE ROWS"
              PL/pgSQL function dm_prepare_updated_target_tasks(bigint,bigint[]) line 6 at SQL statement
    2014-03-07 15:24:14 NZDTSTATEMENT:  SELECT dm_prepare_updated_target_tasks(4322870)
    2014-03-07 15:27:19 NZDTLOG:  statement: CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322874-2" ("value" varchar UNIQUE)
    2014-03-07 15:27:19 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:27:19 NZDTSTATEMENT:  CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322874-2" ("value" varchar UNIQUE)
    2014-03-07 15:27:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_17"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:27:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_11"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:27:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_12"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:27:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_15"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:27:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_14"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:27:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_16"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:27:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_9"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:27:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_10"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:27:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_13"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:27:52 NZDTLOG:  statement: CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322875-2" ("value" varchar UNIQUE)
    2014-03-07 15:27:52 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:27:52 NZDTSTATEMENT:  CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322875-2" ("value" varchar UNIQUE)
    2014-03-07 15:28:15 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:28:15 NZDTLOG:  connection authorized: user=_devicemgr database=template1
    2014-03-07 15:28:16 NZDTLOG:  statement: CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322881-2" ("value" varchar UNIQUE)
    2014-03-07 15:28:16 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:28:16 NZDTSTATEMENT:  CREATE TEMPORARY TABLE "__runtime_temp_devicemgrd-4322881-2" ("value" varchar UNIQUE)
    2014-03-07 15:28:19 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:28:19 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:28:19 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:28:19 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:28:19 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:28:19 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:28:19 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:28:19 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:28:19 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:28:19 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:28:19 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:28:19 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:28:19 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:28:19 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:28:19 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:28:19 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:28:19 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:28:19 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:28:19 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:28:19 NZDTLOG:  connection authorized: user=_devicemgr database=devicemgr_v2m0
    2014-03-07 15:28:53 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:28:53 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE IF NOT EXISTS temp_updated_target_tasks (
              LIKE view_target_tasks
              ) ON COMMIT DELETE ROWS"
              PL/pgSQL function dm_prepare_updated_target_tasks(bigint,bigint[]) line 6 at SQL statement
    2014-03-07 15:28:53 NZDTSTATEMENT:  SELECT dm_prepare_updated_target_tasks(4322886)
    2014-03-07 15:29:16 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:29:16 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE IF NOT EXISTS temp_updated_target_tasks (
              LIKE view_target_tasks
              ) ON COMMIT DELETE ROWS"
              PL/pgSQL function dm_prepare_updated_target_tasks(bigint,bigint[]) line 6 at SQL statement
    2014-03-07 15:29:16 NZDTSTATEMENT:  SELECT dm_prepare_updated_target_tasks(4322888)
    2014-03-07 15:29:23 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:29:23 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE IF NOT EXISTS temp_updated_target_tasks (
              LIKE view_target_tasks
              ) ON COMMIT DELETE ROWS"
              PL/pgSQL function dm_prepare_updated_target_tasks(bigint,bigint[]) line 6 at SQL statement
    2014-03-07 15:29:23 NZDTSTATEMENT:  SELECT dm_prepare_updated_target_tasks(4322890)
    2014-03-07 15:29:28 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:29:28 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE IF NOT EXISTS temp_updated_target_tasks (
              LIKE view_target_tasks
              ) ON COMMIT DELETE ROWS"
              PL/pgSQL function dm_prepare_updated_target_tasks(bigint,bigint[]) line 6 at SQL statement
    2014-03-07 15:29:28 NZDTSTATEMENT:  SELECT dm_prepare_updated_target_tasks(4322892)
    2014-03-07 15:29:38 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:29:38 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE IF NOT EXISTS temp_updated_target_tasks (
              LIKE view_target_tasks
              ) ON COMMIT DELETE ROWS"
              PL/pgSQL function dm_prepare_updated_target_tasks(bigint,bigint[]) line 6 at SQL statement
    2014-03-07 15:29:38 NZDTSTATEMENT:  SELECT dm_prepare_updated_target_tasks(4322894)
    2014-03-07 15:34:34 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:34:34 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE IF NOT EXISTS temp_updated_target_tasks (
              LIKE view_target_tasks
              ) ON COMMIT DELETE ROWS"
              PL/pgSQL function dm_prepare_updated_target_tasks(bigint,bigint[]) line 6 at SQL statement
    2014-03-07 15:34:34 NZDTSTATEMENT:  SELECT dm_prepare_updated_target_tasks(4322921)
    2014-03-07 15:34:45 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:34:45 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE IF NOT EXISTS temp_updated_target_tasks (
              LIKE view_target_tasks
              ) ON COMMIT DELETE ROWS"
              PL/pgSQL function dm_prepare_updated_target_tasks(bigint,bigint[]) line 6 at SQL statement
    2014-03-07 15:34:45 NZDTSTATEMENT:  SELECT dm_prepare_updated_target_tasks(4322923)
    2014-03-07 15:34:49 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:34:49 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE IF NOT EXISTS temp_updated_target_tasks (
              LIKE view_target_tasks
              ) ON COMMIT DELETE ROWS"
              PL/pgSQL function dm_prepare_updated_target_tasks(bigint,bigint[]) line 6 at SQL statement
    2014-03-07 15:34:49 NZDTSTATEMENT:  SELECT dm_prepare_updated_target_tasks(4322927)
    2014-03-07 15:34:52 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:34:52 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE IF NOT EXISTS temp_updated_target_tasks (
              LIKE view_target_tasks
              ) ON COMMIT DELETE ROWS"
              PL/pgSQL function dm_prepare_updated_target_tasks(bigint,bigint[]) line 6 at SQL statement
    2014-03-07 15:34:52 NZDTSTATEMENT:  SELECT dm_prepare_updated_target_tasks(4322929)
    2014-03-07 15:35:11 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:35:11 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE IF NOT EXISTS temp_updated_target_tasks (
              LIKE view_target_tasks
              ) ON COMMIT DELETE ROWS"
              PL/pgSQL function dm_prepare_updated_target_tasks(bigint,bigint[]) line 6 at SQL statement
    2014-03-07 15:35:11 NZDTSTATEMENT:  SELECT dm_prepare_updated_target_tasks(4322931)
    2014-03-07 15:35:14 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:35:14 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE IF NOT EXISTS temp_updated_target_tasks (
              LIKE view_target_tasks
              ) ON COMMIT DELETE ROWS"
              PL/pgSQL function dm_prepare_updated_target_tasks(bigint,bigint[]) line 6 at SQL statement
    2014-03-07 15:35:14 NZDTSTATEMENT:  SELECT dm_prepare_updated_target_tasks(4322933)
    2014-03-07 15:35:53 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:35:53 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE IF NOT EXISTS temp_updated_target_tasks (
              LIKE view_target_tasks
              ) ON COMMIT DELETE ROWS"
              PL/pgSQL function dm_prepare_updated_target_tasks(bigint,bigint[]) line 6 at SQL statement
    2014-03-07 15:35:53 NZDTSTATEMENT:  SELECT dm_prepare_updated_target_tasks(4322936)
    2014-03-07 15:35:58 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:35:58 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE IF NOT EXISTS temp_updated_target_tasks (
              LIKE view_target_tasks
              ) ON COMMIT DELETE ROWS"
              PL/pgSQL function dm_prepare_updated_target_tasks(bigint,bigint[]) line 6 at SQL statement
    2014-03-07 15:35:58 NZDTSTATEMENT:  SELECT dm_prepare_updated_target_tasks(4322939)
    2014-03-07 15:36:01 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:36:01 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE IF NOT EXISTS temp_updated_target_tasks (
              LIKE view_target_tasks
              ) ON COMMIT DELETE ROWS"
              PL/pgSQL function dm_prepare_updated_target_tasks(bigint,bigint[]) line 6 at SQL statement
    2014-03-07 15:36:01 NZDTSTATEMENT:  SELECT dm_prepare_updated_target_tasks(4322941)
    2014-03-07 15:36:06 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:36:06 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE IF NOT EXISTS temp_updated_target_tasks (
              LIKE view_target_tasks
              ) ON COMMIT DELETE ROWS"
              PL/pgSQL function dm_prepare_updated_target_tasks(bigint,bigint[]) line 6 at SQL statement
    2014-03-07 15:36:06 NZDTSTATEMENT:  SELECT dm_prepare_updated_target_tasks(4322944)
    2014-03-07 15:36:06 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:36:06 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE IF NOT EXISTS temp_updated_target_tasks (
              LIKE view_target_tasks
              ) ON COMMIT DELETE ROWS"
              PL/pgSQL function dm_prepare_updated_target_tasks(bigint,bigint[]) line 6 at SQL statement
    2014-03-07 15:36:06 NZDTSTATEMENT:  SELECT dm_prepare_updated_target_tasks(4322945)
    2014-03-07 15:36:12 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:36:12 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE IF NOT EXISTS temp_updated_target_tasks (
              LIKE view_target_tasks
              ) ON COMMIT DELETE ROWS"
              PL/pgSQL function dm_prepare_updated_target_tasks(bigint,bigint[]) line 6 at SQL statement
    2014-03-07 15:36:12 NZDTSTATEMENT:  SELECT dm_prepare_updated_target_tasks(4322948)
    2014-03-07 15:36:23 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:36:23 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE IF NOT EXISTS temp_updated_target_tasks (
              LIKE view_target_tasks
              ) ON COMMIT DELETE ROWS"
              PL/pgSQL function dm_prepare_updated_target_tasks(bigint,bigint[]) line 6 at SQL statement
    2014-03-07 15:36:23 NZDTSTATEMENT:  SELECT dm_prepare_updated_target_tasks(4322950)
    2014-03-07 15:36:26 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:36:26 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE IF NOT EXISTS temp_updated_target_tasks (
              LIKE view_target_tasks
              ) ON COMMIT DELETE ROWS"
              PL/pgSQL function dm_prepare_updated_target_tasks(bigint,bigint[]) line 6 at SQL statement
    2014-03-07 15:36:26 NZDTSTATEMENT:  SELECT dm_prepare_updated_target_tasks(4322952)
    2014-03-07 15:36:42 NZDTERROR:  could not read block 46 in file "base/17197/12027": read only 0 of 8192 bytes
    2014-03-07 15:36:42 NZDTCONTEXT:  SQL statement "CREATE TEMPORARY TABLE IF NOT EXISTS temp_updated_target_tasks (
              LIKE view_target_tasks
              ) ON COMMIT DELETE ROWS"
              PL/pgSQL function dm_prepare_updated_target_tasks(bigint,bigint[]) line 6 at SQL statement
    2014-03-07 15:36:42 NZDTSTATEMENT:  SELECT dm_prepare_updated_target_tasks(4322954)
    2014-03-07 15:37:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_17"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:37:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_11"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:37:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_12"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:37:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_15"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:37:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_14"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:37:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_16"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:37:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_9"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:37:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_10"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:37:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_13"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:38:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_17"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:38:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_11"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:38:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_12"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:38:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_15"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:38:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_14"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:38:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_16"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:38:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_9"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:38:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_10"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:38:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_13"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:39:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_17"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:39:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_11"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:39:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_12"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:39:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_15"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:39:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_14"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:39:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_16"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:39:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_9"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:39:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_10"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:39:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_13"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:40:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_17"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:40:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_11"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:40:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_12"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:40:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_15"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:40:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_14"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:40:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_16"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:40:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_9"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:40:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_10"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:40:35 NZDTLOG:  autovacuum: found orphan temp table "pg_temp_13"."temp_updated_target_tasks" in database "devicemgr_v2m0"
    2014-03-07 15:40:56 NZDTLOG:  statement: ALTER TABLE "widgets" ENABLE TRIGGER USER
    2014-03-07 15:40:56 NZDTLOG:  statement: ALTER TABLE "preference_panes" ENABLE TRIGGER USER
    2014-03-07 15:40:56 NZDTLOG:  statement: ALTER TABLE "printers" ENABLE TRIGGER USER
    2014-03-07 15:40:56 NZDTLOG:  statement: ALTER TABLE "installed_applications" ENABLE TRIGGER USER
    2014-03-07 15:40:56 NZDTLOG:  statement: ALTER TABLE "users" ENABLE TRIGGER USER
    2014-03-07 15:40:56 NZDTLOG:  statement: ALTER TABLE "profiles" ENABLE TRIGGER USER
    2014-03-07 15:40:57 NZDTLOG:  statement: ALTER TABLE "dm_schema_information" ENABLE TRIGGER USER
    2014-03-07 15:40:57 NZDTLOG:  connection received: host=[local]
    2014-03-07 15:40:57 NZDTLOG:  statement: ALTER TABLE "provisioning_profiles" ENABLE TRIGGER USER
    2014-03-07 15:40:57 NZDTLOG:  connection authorized: user=_devicemgr database=postgres
    2014-03-07 15:40:57 NZDTLOG:  statement: ALTER TABLE "od_nodes" ENABLE TRIGGER USER
    2014-03-07 15:40:57 NZDTLOG:  statement: ALTER TABLE "user_groups" ENABLE TRIGGER USER
    2014-03-07 15:40:57 NZDTLOG:  statement: ALTER TABLE "network_lab_sessions" ENABLE TRIGGER USER
    2014-03-07 15:40:57 NZDTLOG:  statement: ALTER TABLE "enterprise_apps" ENABLE TRIGGER USER
    2014-03-07 15:40:57 NZDTLOG:  statement: ALTER TABLE "library_items" ENABLE TRIGGER USER
    2014-03-07 15:40:58 NZDTLOG:  statement: ALTER TABLE "data_files" ENABLE TRIGGER USER
    2014-03-07 15:40:58 NZDTFATAL:  terminating connection due to administrator command
    2014-03-07 15:40:58 NZDTFATAL:  terminating connection due to administrator command
    2014-03-07 15:40:58 NZDTFATAL:  terminating connection due to administrator command
    2014-03-07 15:40:58 NZDTFATAL:  terminating connection due to administrator command
    2014-03-07 15:40:58 NZDTFATAL:  terminating connection due to administrator command
    2014-03-07 15:40:58 NZDTFATAL:  terminating connection due to administrator command
    2014-03-07 15:40:58 NZDTLOG:  received smart shutdown request
    2014-03-07 15:40:58 NZDTLOG:  autovacuum launcher shutting down
    2014-03-07 15:40:58 NZDTLOG:  statement: ALTER TABLE "knob_sets" ENABLE TRIGGER USER
    2014-03-07 15:40:58 NZDTLOG:  statement: ALTER TABLE "od_library_items" ENABLE TRIGGER USER
    2014-03-07 15:40:58 NZDTLOG:  statement: ALTER TABLE "work_tasks" ENABLE TRIGGER USER
    2014-03-07 15:40:58 NZDTLOG:  statement: ALTER TABLE "user_tasks" ENABLE TRIGGER USER
    2014-03-07 15:40:58 NZDTLOG:  statement: ALTER TABLE "mdm_targets" ENABLE TRIGGER USER
    2014-03-07 15:40:58 NZDTLOG:  statement: ALTER TABLE "asset_metadata" ENABLE TRIGGER USER
    2014-03-07 15:40:58 NZDTLOG:  statement: ALTER TABLE "auto_join_profiles" ENABLE TRIGGER USER
    2014-03-07 15:40:58 NZDTLOG:  statement: ALTER TABLE "db_notifications" ENABLE TRIGGER USER
    2014-03-07 15:40:58 NZDTLOG:  statement: ALTER TABLE "internal_tasks" ENABLE TRIGGER USER
    2014-03-07 15:40:58 NZDTLOG:  statement: ALTER TABLE "library_item_tasks" ENABLE TRIGGER USER
    2014-03-07 15:40:58 NZDTLOG:  statement: ALTER TABLE "vpp_licenses" ENABLE TRIGGER USER
    2014-03-07 15:40:58 NZDTLOG:  statement: ALTER TABLE "settings" ENABLE TRIGGER USER
    2014-03-07 15:40:58 NZDTLOG:  statement: ALTER TABLE "device_groups" ENABLE TRIGGER USER
    2014-03-07 15:40:58 NZDTLOG:  statement: ALTER TABLE "media" ENABLE TRIGGER USER
    2014-03-07 15:40:58 NZDTLOG:  statement: ALTER TABLE "lab_sessions" ENABLE TRIGGER USER
    2014-03-07 15:40:58 NZDTLOG:  statement: ALTER TABLE "owner_lab_sessions" ENABLE TRIGGER USER
    2014-03-07 15:40:58 NZDTLOG:  statement: ALTER TABLE "library_item_metadata" ENABLE TRIGGER USER
    2014-03-07 15:40:58 NZDTLOG:  statement: ALTER TABLE "dynamic_attributes_defaults" ENABLE TRIGGER USER
    2014-03-07 15:40:59 NZDTLOG:  statement: ALTER TABLE "mdm_tasks" ENABLE TRIGGER USER
    2014-03-07 15:40:59 NZDTLOG:  statement: ALTER TABLE "completed_tasks" ENABLE TRIGGER USER
    2014-03-07 15:40:59 NZDTL

Maybe you are looking for

  • HOw to create a text file in the given path and delete it after the use?

    Hi all, I am trying to create a text file at the given path and delete the created file after the use. I am using following code.: import java.io.*; // write binary data as characters public class RanIO {                                         publi

  • Best Practice : Creating Custom Renderer for Standard Component

    I've been reading the docs and a few threads about Custom Renderers. The best practice seems to be to create a Custom Component where you need a Custom Renderer. Is this the case? See [this post|http://forums.sun.com/thread.jspa?forumID=427&threadID=

  • I can't install netflix in the iPad, why is this?

    I'm trying to install the Netflix app in. My iPad but it won't let me. The message says that request cannot be completed. What can I do?

  • Importing Slideshow into DW

    I am a newbie to FW. I have created several slideshows of my photography. I have yet to figure out how to import these shows into DW. Help is appreciated.

  • Reading From Excel

    I want to read data from an excel spreadsheet, however the column names arent on the first row, so i cant simply perform SELECT Names From [QAS$];As the Names column definition is 6 rows down. Is there anyway i can specify the row that contains the c