An error in cash jounal:For object CAJO_DOC2 AAA, number range interval 01

hi
whan i am doing an entry in cash journal(in cas receipts) and post when a massege coms here "For object CAJO_DOC2 AAA, number range interval 01 does not exist"
can anybody help me and solve it.
thanks

HI,
First Method
Go to TCODE "SNRO"
Give the Object as "CAJO_DOC2"
Click on the "Number Ranges"
Give the Company code
Click on the Change Intervals.
Mainatain number range 01 and save.
Second method
use path Spro>FA(NEw)>Bank accounting>Business transactions>Cash Journal-->Define Number Range Intervals for Cash Journal Documents
Or Tcode FBCJC1 to maintain number range intervals.
An assumption to the above solution is that you have assigned the FI document type with which these documents should get posted with in the following path an dthe number range for that document type is alreday defined.
Spro>FA(NEw)>Bank accounting>Business transactions>Cash Journal-->Set Up Cash Journal
With adopting one of the above solutions you will be able to post the transactions.
Reward points.
Sarma

Similar Messages

Error: For object RF_BELEG 9000, number range interval 92 does not exist FB

Hi,
When I am executing AFAB in test run mode for a particular company code I am getting below mentioned error:
+For object RF_BELEG 9000, number range interval 92 does not exist FBN1+
    +Message no. NR751+
+Diagnosis+
    +The database table NRIV has the delivery class 'C', i.e. the SAP default+
    +settings are only in client 000.+
+Procedure+
    +Create the missing number range interval in customizing.+
    +Transaction code: FBN1+
When I maintain number range 92 this error goes away. My question is we have no where assigned this number range 92 to any of the Document type then why system is asking to maintain the same?
Sanjay

Hi,
You might be using the number range (say 92 which you've created in GL view & not in ENTRY view).
Steps:
Go to Define Document Number Ranges for Entry View OR use T-code FBN1.   Maintain & Assign two Number Ranges say 91 & 92 one for Document Type AF and another for AE for both the non-leading Ledgers say Y1 & Y2 ( Define Document Type for Entry VIew in a ledger). Also assign a number range to
Document type SX (Closing Posting) apart from the above two Number Ranges (91 & 92)
Hopefully it works for You............
Dipti

For object RF_BELEG 2020, number range interval 50 does not exist FBN1

Hi Guru's
While posting GR i am getting this error
For object RF_BELEG 2020, number range interval 50 does not exist FBN1
kindly guide me to slove this error. Thanks in advance
Regards
Anandh

Hi Piyush Mishra
I have entered the number range intervals in FBN1. Still the error is existing.
Number range interval 50 means ?? Any specific range of 50 we should give ???
regards
anandh

For object RF_BELEG LT, number range interval 50 does not exist FBN1

dear all
system showing this message (For object RF_BELEG LT, number range interval 50 does not exist FBN1)

Hey Manish,
You can use these t-codes.It can be solved with all together number ranges.
1- OBH2
In this activity, you can determine which intervals of document number ranges are to be copied from one fiscal year into another per company code.
2- OBH1
In this activity, you can copy intervals of document number ranges from one company code to other company codes. To do this, you have to store the following information:
Wish you all the best.
Onur

For object RF_BELEG OK03, number range interval 33 does not exist

Hi. After new year I opened financial and material periods (01/2008). When I want to make some movement in MB1B - the communicate occurs:
For object RF_BELEG OK03, number range interval 33 does not exist
Could You give me some tip what should I do now?

go to j1i9 or snro
enter uour object name
assign here
no range 33

Error-For object GL_LOCAL GBU1, number range interval does not exist

Hello experts
I attempted to post a JVA cash call in GJ01 and I encountered the following error. It does not state what number range interval is missing and that is my issue. I checked the number range interval for local ranges and it exists, both for years 9999 and 2015. I have checked the number ranges for each document type to make sure that they exist. I did not receive any conflict in the number ranges assigned to various document types. I had read somewhere that this could be related to non-leading ledgers and I am no FI expert. What could be the problem and how can I resolve this issue?. I am looking for your help and guidance.
Please see the attached screenshots.
Thank you.

Hi Rahul
Thank you for your response and help. I am actually in DEV and although it says something like transporting the interval and making note of any message, the Transport option is greyed. So, I just executed tcode GB02 and went straight to Interval --> transport.
Even after tcode GB02, Interval --> Transport, I received the same error while trying to post a transaction.

For object rf_beleg 3000 number range inerval 50 does not exist FBN1

for object rf_beleg 3000 number range inerval 50 does not exist FBN1
in ob52 i see the following for my cc 3000
        from period1   year    to period   year     from period 2   year to period year
3000+        1         2003       12        2007         13                2007   16 2007
3000A        1        2003        12       2007
3000D        1        2003         12      2007
3000K        1        2003         12      2007
3000S         1       2003         12      2007
when i try to post a goods movement for a po i get the following error
for object rf_beleg 3000 number range inerval 50 does not exist FBN1
is something wrong in this table???????
any help would be great
thank you in advance

Hi
This is not connected with Posting periods but with document number ranges.
Create document Number range interval 50 for year 2007 using T.code FBN1.
This should solve ur problem
Regards
Aravind
Assign points if useful

SAP workflow -SAP error WL210 -Error triggering default method for object &

Hi Experts,
User is encountered with the error message "Error triggering default method for object &" when he is performing approval action in SES workitem .
Could you please advise me how to avoid this issue.
Thanks in advance for your valuable help.
Rajani
Edited by: Rajani SAPABAP on Sep 13, 2011 4:50 PM

Hi Rajani,
I think that it's an authorization issue.
Please check if u find which authorization object is violated in SU53.
Regards,
Asit

ERROR TRIGGERING DEFAULT METHOD FOR OBJECT (INCOMING INVOICE).

When trying to open invoices in my ERP inbox to authorise I get the following message.
ERROR TRIGGERING DEFAULT METHOD FOR OBJECT (INCOMING INVOICE).
. There might be an authorisation issue. but i am not confirm.
I have checked the authorisation in SU53 also.
is it possible that there is some other reason for it.
If so then what are they?
please help.

Hi Naval,
Is it a custom business object....make sure that the status of all object components are set to Implemented or released..and regenerate the Object...
Thanks
Srinivas

Number range interval not found for object ISH_NLEI in executing NP38

Dear ALL,
In executing Transaction NP38 when we save the surgical procedure codes the system
generates an error message "number range interval not found " . The object referred here
ISH_NLEI number range has already been defined in spro Define technical number range.
Please assist what should be done here to resolve the problem.
Regards
Ramit

Hi, check if it maintained in tcode snro for this object

For object RV_BELEG , number range interval does not exit

I am receiving this error when trying to generate billing document type L2 for a newly created company code.
Exisiting company codes are generating billing documents so obviously this is to do with a company code related definition.
Any thouhgts ?
-Mark

Please check if the error is
"For object RV_BELEG , number range interval does not exit"
"For object RV_BELEG , number range interval <b>10</b> does not exit"
10 used as an example here you may be getting any 2-digit alpha-numeric value in stead of 10.
Also Check
If you are using
Include program : RV60AFZZ
Routine: USEREXIT_NUMBER_RANGE
If so then for each plant you have assign a number range for each billing type (L2- here).
Thanks,
Ashish

For object XABBELEGNR , number range interval does not exist OMJ6

Dear all
I want to enter only the value between 1 to 5 in GR/GI Slip No for T.code Mb01,but it is not allowing it is showing as For object XABBELEGNR , number range interval does not exist OMJ6.
Kindly let me know how to proceed,so that i can enter value between 1 to 5 in that field.
regards
M.Chandra mohan

hi
u just go to tcode omc1.
activate gr/gi slip for plant
then create number range group code and assign it to plant ,storage location and movenent type combination.
Then u can create the intervals thru OMJ6.
Hope it helps
rewrad if useful
Rohit

Error :number range interval 01 does not exist

Hi,
i created a number range object Z_REPORTID in SNRO for autogenerated ids and later used the function module NUMBER_GET_NEXT. After execution i got the following error.
For object Z_REPORTID, number range interval 01 does not exist
Message no. NR751
Diagnosis
The database table NRIV has the delivery class 'C', i.e. the SAP default settings are only in client 000.
Procedure
Create the missing number range interval in customizing
Please help me to trace this out.
Thanks,
Anila

Hi
AFter creating the number range interval in SNRO you must TRANSPORT the interval. In the first screen --> Interval --> Transport.
Did you perform that step?
If you did that it should work well. Itried the same now and it is working fine.

Object RV_BELEG number range interval 01 does not exist

Hi Gurus,
I need suggestion or solution to solve my problem when creating sales order(standard order) from VA01 transaction.
Error Descriptio and Message:
For object RV_BELEG , number range interval 01 does not exist
Message no. NR751
Diagnosis
The database table NRIV has the delivery class 'C', i.e. the SAP default settings are only in client 000.
Procedure
Create the missing number range interval in customizing.
Transaction code:
Reporducing the error:
Screen flow: VA01 Intial Screen Input
                      Order Type: SD 'Subs.Dlv.Free of Ch'.
                      Sales Org :
                      Enter.
                      Next Screen: Click on "Complete Dlv" push butoon.
                      It will take to next screen go with "SAVE" option.
                      Iam getting an incomplete Delivery want to edit.
                      Go with "EDIT" and give Input in "ORDER REASON" drill down option.
                      select any one option and go with arrow symbol in the menu "EDIT NEXT DATA" or F5.
                      Provide Input In "Customer Group" drill down option select any one option from it.
                      Again go with arrow symbol in the menu "EDIT NEXT DATA" or F5.
                      Here iam getting an status "Document is complete".
                      Click on "SAVE" option.
Here status message error showing: "For object RV_BELEG , number range interval 01 does not exist".
This is the issue occuring with me while creating Sale Order from VA01.
help me if any one have know solution or suggestion to solve error.
Tnks & Rgds
Bhaskar

This because of the missing SD Document Number Range.
You can check this in tcode SNRO for object RV_BELEG.
Ask your SD Consultant to Change the number range assignment or create that missing 01 number range number object.
This will solve your problem,
Regards
Karthik D

Error in billing number range interval.

Hi,
I created a new billing type. I assigned the number range properly. But at the time of billing document generation, system is throwing a message "For object RV_BELEG , number range interval doesnot exist". I have checked in 'SNRO' against the object type 'RV_BELEG' , the number range interval that I have assigned for the new billing type is existing there. Still the error is coming.
Please suggest what needs to be done.
Thanks & regards,
Rupam.
Edited by: RUPAM KR SEN on Mar 21, 2011 10:46 AM
Edited by: RUPAM KR SEN on Mar 21, 2011 10:47 AM

Hi Samit,
Thanks a lot for your suggetion. There is an user exit but with different program name in our system. Due that user exit the customizing done by me was not working properly. The exit has been deactivated and now it's working fine.
Thanks & regards,
Rupam.
Edited by: RUPAM KR SEN on Mar 21, 2011 1:56 PM

An error in cash jounal:For object CAJO_DOC2 AAA, number range interval 01

Similar Messages

Maybe you are looking for