An error in the making cdc

In the end, no file named "globals.o" in the directory ,help me!

There's a comment function at the bottom of the link you provided! In addition Oracle will take SRs against the documentation.
Regards
Niall Litchfield
http://www.orawin.info/

Similar Messages

While making a backup copy in Itunes of my Iphone I receive the following error message: While making a backup copy of this Iphone (-35) an error has occurred. Do you want to continue with altering this Iphone? When you continue al the material on this I

While making a backup copy in Itunes of my Iphone I receive the following error message: While making a backup copy of this iPhone (-35) an error has occurred. Do you want to continue with altering this Iphone? When you continue al the material on this Iphone will be lost.
I reinstalled iTunes but that dit not help. After synching iTunes with my iPhone it also asks to authorize my pc and when i Click on ok, it says it is already authorized.
Please can somebody help me, so I can make backup.
Greetz,
Derk

It's likely that your backup is corrupt. Try deleting the backup, then right click on the name of the phone in iTunes and choose "back up". To delete go to iTunes Preferences, Devices tab. Highlight and delete the most recent backup. Note that sometimes deleting this way leaves some garbage around that can still interfere with a new backup, so you should verify that the backup folder is empty.
from: http://support.apple.com/kb/HT4946
The folder where your backup data are stored varies depending on the computer's operating system. Make sure the backup folder is included in your periodic data-backup routine.
iTunes places the backup files in the following places:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Note: To quickly access the Application Data folder, click Start, and choose Run. Type %appdata% and click OK.
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: To quickly access the AppData folder, click Start. In the search bar, type %appdata% and press the Return key.

HT1694 I'm having a lot of problems with the hotmail account, regularly is indicating an error in the server, that I have to introduce the password again that late that this is wrong. I have changed the password making this shorter but it does not work.

I'm having a lot of problems with the hotmail account, regularly is indicating an error in the server, that I have to introduce the password again that late that this is wrong. I have changed the password making this shorter but it does not work.

bump? Is bumping allowed? Lol.
I just really need some help here.

I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?

I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?

I used Terminal to change the permissions on the folder in question. I followed the instructions in this article:
iTunes: Missing folder or incorrect permissions may prevent authorization
In my case, the folder was there, so I needed the command to change permissions on the folder, not to create one. I was hesitant to use Terminal b/c I know that if I made an error I could wipe out my hard drive or render my computer unusable. So to be SURE I didn't make an error, I carefully copied the command from that page and *pasted* it into Terminal. Also, before I could do anything in Terminal, I had to go change my admin password (it had been a blank password before and that's not acceptable for making changes in Terminal). I was just super careful when entering my password or doing anything else while Terminal was open (making sure I didn't accidently hit the spacebar or another key, etc.) And it fixed the problem right away.
What was confusing for me was that the iTunes error message said to change permissions in the FINDER, which is what I was trying to do. It didn't mention Terminal. What would really be helpful is if Apple included a link to a page like this in their error message.

ORA-00607: Internal error occurred while making a change to a data block

hi
i hv use testing purpose oracle 10 Xe in unix
but when today i hv connect database following error occured
SQL> startup
ORACLE instance started.
Total System Global Area 83886080 bytes
Fixed Size 1257284 bytes
Variable Size 75497660 bytes
Database Buffers 4194304 bytes
Redo Buffers 2936832 bytes
Database mounted.
ORA-00607: Internal error occurred while making a change to a data block
ORA-00600: internal error code, arguments: [4193], [625], [640], [], [], [],
I hv check alert log , but no proper solution is given , how can start database

Duh, and of course I missed the significance of
oracle 10 Xe in unix
XE is only supported for Linux - according to the downloads page that means "Debian, Mandriva, Novell, Red Hat and Ubuntu".
Oracle have not publically stated the reasons why XE is only available on Linux and Windows, but my guess is that it is something to do the Intel chip architecture. If this is so it would be possible for Oracle to port XE to run on Solaris for x86. But they have not done so yet.
Which means, alas, that you are unlikely to get any help for this one, because XE is not supported on any unix platform.
Good luck, APC

Error #2057: The page could not be added to the print job.

I've been making myself crazy over this one. I'm trying to print a complex multi-page "report" in Flex, but I keep getting this error every time I try to call FlexPrintJob.addObject(page):
Error #2057: The page could not be added to the print job.
Here is the basic scenario... I have created a new control I call a PrintVBox that extends the normal VBox control. After adding all of the children properly to the component, I wait for an update event (so that the heights of all the components are calculated) and then I call a custom method I have added to PrintVBox that "paginates" the control.
This pagination method essentially decides how many of the items in the VBox can fix on each page, and splits them up into separate pages. Here's a somewhat graphic example of what happens:
(before paginate)
***** PrintVBox ********
     [ Item 1 ]
     [ Item 2 ]
     [ Item 3 ]
     [ Item 4 ]
     [ Item 5 ]
This single VBox with 5 items, after calling the paginate method becomes something like this:
(after paginate)
****** PrintVBox ********
     **** VBox (page1) ******
               [ Item 1 ]
               [ Item 2 ]
     **** VBox (page 2) ******
               [ Item 3 ]
               [ Item 4 ]
               [ Item 5 ]
So, what was once a single VBox with 5 UIComponents on it is now a VBox that contains two VBoxes, each the exact size of a printable page, one containing the first two items, the other containing the second two items.
In my example that I am working on, my PrintVBox that I have created uses a Repeater to create about 20 HBoxes on the page. I then call
myFlexPrintJob.start()
to show the print dialog and get the user's parameters. I then pass the chosen print height and width to the PrintVBox control and call the paginate method, which creates pages of the desired width/height. I have tested this part thoroughly and displayed the resulting PrintVBox on the screen and it paginates successfully and all is well. After paginate, it has created 3 page VBoxes each holding some of those 20 items.
I then iterate thru PrintVBox.getChildren() array, in this case which is the three VBox pages, and I call:
myFlexPrintJob.addObject(page);
for each one. Each one errors out with the above error. The error is down in the PrintJob code, which is part of the Flash framework and I cannot step through it. I have no indication of why the page can't be added to the print job. Is there a reason this is happening?? Does it have to do with the Repeater that originally created the 20 HBoxes, even though I have now moved those HBoxes down onto separate pages? I'm just so confused here.
I can probably post the entire code chunk if someone really wanted it. I'm currently testing it as an AIR application using a big tester XML data object on the repeater, so that I didn't need a database and such to create the control and test printing. If someone really wants to see what I'm doing, let me know.
HELP! PLEASE!!
Thanks,
Joe

Were you able to solve this problem?
I am currently having the same problem as yours... I created my own printing classes that do all crazy calculation to figure out page breaks and stuff... everything goes well until the point I want to add these pages to the printJob. I get same error?
Any help is highly appreciated.
Thanks,

Error in the worklist control[[WLI-Worklist:493028]Internal error: unexpect

Hi,
The exception bellow is being raised when I call the getTaskInfos from a worklist control.
Caused by: com.bea.control.ControlException: Error in the worklist control[[WLI-Worklist:493028]Internal error: unexpected ejb exception.]
     at com.bea.wli.worklist.control.TaskWorkerControlHelper.invoke(TaskWorkerControlHelper.java:721)
     at com.bea.control.TaskWorkerControlImpl.invoke(TaskWorkerControlImpl.jcs:48)
     at com.bea.wlw.runtime.core.dispatcher.DispMethod.invoke(DispMethod.java:377)
     at com.bea.wlw.runtime.core.container.Invocable.invoke(Invocable.java:423)
     at com.bea.wlw.runtime.core.container.Invocable.invoke(Invocable.java:396)
     at com.bea.wlw.runtime.jcs.container.JcsProxy.invoke(JcsProxy.java:388)
     at $Proxy89.getTaskInfos(Unknown Source)
     at com.orderEntry.status.OrderEntryStatusProcess.orderEntryWorkerGetTaskInfos(OrderEntryStatusProcess.jpd:390)
     at com.orderEntry.status.OrderEntryStatusProcess_wf$ImplControlSend19.invoke(OrderEntryStatusProcess_wf.java:134)
     at com.bea.wli.bpm.runtime.Perform.execute(Perform.java:32)
     ... 77 more
This is how IÂ´m making the call:
log.debub("tskName=" + tskName + " - Order#=" + myOrder);
tskSelector = new TaskSelector();
tskSelector.setTaskName(tskName, false);
tskSelector.setStateTypes(new StateType[]{StateType.ASSIGNED});
tskSelector.addProperty("OrderNumber", myOrder, false);
selectedTasks = orderEntryWorker.getTaskInfos(tskSelector);
where tskName and myOrder has valid values.
thanks.

SOA server installation and/or configuration seems to be the problem. I deployed the same compostie in a different "working" soa-server and it seems to work. But why the soa_server is bad is important to determine. Any suggestions welcome...
Edited by: user9138987 on Apr 8, 2010 10:17 AM

Error in the instructions for performing a silent install

There's an error in the instructions for performing a silent install of Photoshop Elements:
http://helpx.adobe.com/photoshop-elements/kb/silent-install-instructions-photoshop-element s-1.html
In step 9, the instructions say to use the following command line:
start /wait "path to Setup.exe" /UL%LangCode% /V“SERIALNUMBER=%AOO volume license serial number%"
The correct command line, however, is this:
start /wait "path to Setup.exe" /UL%LangCode% /V"SERIALNUMBER=%AOO volume license serial number%"
See the difference? Look closely at the character after the /V. In the instructions on the website, they put in a "curly quote" character. This obviously needs to be a straight quote.
Interestingly enough, the erroneous command line from the web site will actually work just fine as posted if all you are passing in the /V is the serial number. If, however, you wanted to add a "NODESKTOPICON=1" to disable the creation of a desktop shortcut, for example:
start /wait "path to Setup.exe" /UL%LangCode% /V“SERIALNUMBER=%AOO volume license serial number% NODESKTOPICON=1"
then it fails to run silently.
I post this in the hopes that Adobe will fix the typo in their instructions and save other admins the hours of grief I've been put through today trying to get this working.

Check the response file where you define the SGA memory size for the new database.
You can also choose not to create the database at the installation and do it afterwards, making a specific response file for it. (I'd recommend specially this option. like that you can separate possible installation errors with the ones on the DB creation process).
Good luck.
Regards,
Enric Moya

There were errors installing the software

Mac Mini G4 1.25GHz / 512MB / 40GB / Combo / Modem.
Ser: YM6***TAB
<Edited by Moderator: Personal Info - Please See Terms of Use>
Originally Mum's Mini was "doing strange things", so I had to drive 150 miles to try to sort it out.
First I downloaded AppleJack and tried it out on my own G4 Tower before heading north to visit Mum. Applejack installed OK from my USB memory stick.
Unfortunately, it didn't occur to me to take a spare keyboard and I was unable to get her Mac Mini (with a miniature keyboard) to respond to any key presses at start-up, which foiled all attempts to use AppleJack or even single user mode!
However, I was able to use DiskWarrior and it found several corrupted files on the Hard Drive, which it claimed (after two attempts) were repaired. I then "repaired permissions" and ejected the DiskWarrior disc. Then I had the bright idea of going to "Software Update" in the Apple Menu. This downloaded the latest OS10.4.11 and started to install it. After 20 minutes it reported that there was a "problem with installation" and I should reboot and try again, which I did, with the same result. So then I had the amazingly bright idea of erasing the drive and installing 10.4 from the original DVD. This got several minutes into the procedure before reporting a problem. "There were problems installing the software".
I gave up at that point, left Mum my iBook to use and brought the Mac Mini home.
I was able to boot it up from an external Firewire HD, which contained a clone of the boot drive from my own G4 Mac Mini. It seemed to work OK so I tried the Tiger installation DVD again. It failed as before but I was able to save the Crash Log onto the Firewire Drive and you can view it here:
http://www.amstard.co.uk/temp/OSInstallCrashLog.txt
(I hope this means something to somebody! The way I interpret it is that it installed a file then discovered that file was corrupted?)
I used Prosoft "Drive Genius" to erase the internal Hard Drive again and it reported that all was well. But I still couldn't install the OS.
After that, I couldn't even get the Mac Mini to boot from the external Firewire drive. It just produces a black oblong on a gray screen with a stalled "cog wheel". Here's a photo that I took:
http://www.amstard.co.uk/temp/screenphoto.jpg
There is nothing connected except the standard USB keyboard and mouse at this point and the external Firewire drive.
It does boot up with the generic Tiger installation DVD. I can run Disk Utility, which reports no errors on the Hard Drive. But it fails when I try to install the OS 10.4 with an error message "There were problems installing the software" (generic OS10.4 installer) or "There were errors installing the software" (original Mac Mini OS10.4 installer).
I have fitted a new 120GB drive and replaced the RAM. The OS still fails to install on the newly formatted drive. The Apple site suggests a firmware update for this error message but doesn't list one for the Mini.
I have tried installing OS10.4 from the original Mac Mini installations discs and from a generic 10.4 installer. Both give the same "There were errors installing the software" message.
I have "zapped the PRAM" without making any difference to this symptom.
I have tried doing the simplest installation without any additional fonts, language translators or bundled software.
Any suggestions - apart from "scrap it!"?
Martin (UK)

It does boot up with the generic Tiger installation DVD. I can run Disk Utility, which reports no errors on the Hard Drive. But it fails when I try to install the OS 10.4 with an error message "There were problems installing the software" (generic OS10.4 installer) or "There were errors installing the software" (original Mac Mini OS10.4 installer).
I have fitted a new 120GB drive and replaced the RAM. The OS still fails to install on the newly formatted drive. The Apple site suggests a firmware update for this error message but doesn't list one for the Mini.
I have tried installing OS10.4 from the original Mac Mini installations discs and from a generic 10.4 installer. Both give the same "There were errors installing the software" message.
Since this is an original G4 mini, there is no reason at all that any full retail 10.4 installer, or the original MacOS installer that came with the mini would not work. Later minis, released after Tiger's release date were in some instances unable to boot from the early versions of the Tiger retail installer because 10.4.0 or 10.4.1 pre-dated the versions those minis came supplied with, but clearly that isn't the case with your system.
If you are certain that the MacOS install disk you have is the one that original one that came with the mini (which should be a late version of MacOS 10.3.x), then the only obvious thing to check is that you have correctly partitioned the drive (it should be partitioned in the Apple Partition Map scheme, and then formatted as MacOS Extended (Journalled). If those parameters are met and you continue to get the error from a valid installer for that system, then the potential causes narrow to such things as defective install disks (unlikely since you have tried more than one), defective optical drive unlikely because you can boot from the install disk using the drive), or defective logic board/disk controller - which is a distinct possibility since it's possible that was responsible for the first drive failure (or the indications of failure).
Boot the system using the original MacOS installer and using Disk Utility, set the new internal drive up again with the APM partitioning and MacOS Extended (Journalled) formatting, then immediately run the 'Repair Disk' tool on it to make sure the drive is being read and written correctly. Then performa PMU reset (instructions below) to ensure that the failure to boot from the external FW drive is not a simple matter of dropped FW port. On rebooting with your FW drive connected, hold the Option key down to see if the system then recognizes your external drive. If it does, select it and attempt to boot from it.
With luck that will give you a working system, booted from your external, at which point I would then see if it's possible to clone your external to the new internal drive, rather than attempt a reinstall from the MacOS installer.
On the face of it there should be no reason that would not work since by booting from the MacOS installer you basically show that the system is sound and the optical drive is working. By partitioning and formatting the internal drive and getting a clean bill of health from the repair disk tool, you show the drive and disk controller are OK. That doesn't leave much else to be at fault!

TS3297 there was an error in the itunes store. Please try again later

I keep getting this error that there was an error in the itunes store. Please try again later. I don't seem to have problems downloading music when purchased. Does anyone know how to stop this pop up.
It's making me crazy.
m-

I've been getting errors all morning when trying to connect to thestore either from my Apple TV to watch purchased TV shows, or from my iPhone to redeem gift cards - it would allow me to enter the voucher code but gave no confirmation, but then rejected a second attempt to enter the code - but wouldn't allow me to view my account to confirm my balance.
Connected OK from iTunes on my MacBook Air, the gift cards hadn't been credited, but I was able to add them from there.
Just keep trying?

I bought a team license for two computers, the purchase was recorded on the credit card and the amount recorded in the making, but was unable to validate the association staff . I received an email stating that Adobe could not release the payment and that

I bought a team license for two computers, the purchase was recorded on the credit card and the amount recorded in the making, but was unable to validate the association staff .
I received an email stating that Adobe could not release the payment and that I should validate the method of payment , tried to insert another card number but the system does not accept the security VAT reporting error message. How do I validate my license with association staff and confirm the payment card?

Hi Daniel,
For any sort of payment related matter, kindly contact our support team via: http://helpx.adobe.com/in/contact.html?step=CCSN_adobe-id-signing-in_stillNeedHelp
If you are unable to use chat option kindly try below mentioned steps.
Try different browser.
Delete cookies and cache
If you are still not able to chat, Kindly reply with the below mentioned information.
OS version:
Browser Version:
You can also try: http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
Thanks,
Atul Saini

Budget Error at the time of Release of Purchase order

Hi,
We are using former budgeting and getting budget payment budget exceeding error at the time of releasing a carry forward PO.
PO has been successfully carried forward to next year and we are not making any changes in the PO. While releasing the same via ME28, system is giving budget exceeding error.
Screens shot is attached herewith for reference.
Thanks in advance.

Hi Mar,
The root cause of the issue is incorrect updation of taxes value in EKPO table for that PO, which causes the system to consume less budget at the time of saving of PO.
Now while releasing the PO, system is checking for whole tax amount and sufficient budget is not available in the budget address.
Hope you able to connect the issue.....:P
Regards
Rohit Chopra

Formatting error in the field COBL-GSBER - FF_5 Upload

Hi Experts,
When I upload the bank statement in FF_5, I am getting the following error.
"Error: (00 298) Formatting error in the field COBL-GSBER ; see next message"
If I make the field "Businees Area" Optional in Field Status Group of the "Bank Main Accout", then I am not getting the above error and the posting also happens to the "Bank Main Account".
But if I make "Business Area" Required Entry Field then I get the above error.
Is there any other method to rectify this problem, i.e can this be resolved even after keeping Business Area as a required field.
Pl advice.
Rgds,
Prasad.

Hi,
I hope making Business area optional field is not a wise decision...user may go without inputting the business area in the field which later on will create problem for clearing...
If required go for activating user exit FEB00001... which will give you the business area...
try the same with your ABAPer....
Cheers
PK

Error Rebuilding the KVM.

Hi,
I get the following error, when I make changes to the Makefile ( /j2me_cldc/j2me_cldc_1.0.4/build/linux/) while rebuilding the KVM (cldc1.0.4). The KVM builds fine the first time. But,after making changes( for eg., setting DEBUG to true), I get compile errors on the StringBuilder class.
I got the following error, when I last tried to rebuild the kvm:
src/java/util/Vector.java:81 cannaot access java.lang.StringBuilder
file java/lang/StringBuilder.class not found throw new IllegalArgumentException("Illegal Capacity: "+
make[1]:***[compilefiles] Error 1
make[1]: Leaving Directory '/j2me_cldc/j2me_cldc_1.0.4/api'
make[1]:***[all] Error 1
The compiler is looking for the J2SE StringBuilder while rebuilding the KVM. Could someone suggest whats happening here? ... and a solution for this problem? Thanks in advance!

I get the same result on CLDC on
both Windows and Linux

Error in the data loading

Hi All
One infopackage is loading data to two ODS. It is taking long time and failed with short dump. But if we goto st22 it is not displaying any short dump. I have deleted the red requests from both the data targets and scheduled the infopackage. it is giving the same error.

Hi,
The normal procedure to correct this error will first to identify if you have the data in PSA between ODS and cube. In that if you have all the data in PSA u can update it to target.
In ur case as u dont have a PSA you may have to force the request to red and delete it from target Cube then go to source ODS find the data mart (Tick mark) Confirm by making that the request that you deleted from Cube is the same as that you are going to reset datamart status in ODS (when you click on the tick mark in ODS a pop up will come asking if you want to reset datamart..there scroll to right it will show the request name in target).If its same delete the datamart status and then Trigger the infopackage again. But better to pull it to PSA only or to both PSA and target so that in case it fails again you can pull it from PSA.
If you had pulled it before resetting data mart and the request is successful but without data then u may have lost delta and may need to do a full repair.
this should solve your issue,
JituK

An error in the making cdc

Similar Messages

Maybe you are looking for