An error message "B channel out of service".
Much thanks for you spent time to answer my question.
I set the "E1 Enhanced Card" on VG200 for MGCP and work with CCM3.3.2.
Also the IOS of VG200 has been upgraded to version 12.3<3a>.
But this error also will generated of each B channel.Could you help me to solve the problem ?
Thanks !
When I checked , it looks like
DTMF Events Through SIP Signaling
DTMF Relay for SIP Calls Using Named Telephone Events (NTE)
H.323 Dual Tone Multifrequency (DTMF) Relay Using Named Telephone Events
MGCP Based Fax (T.38) and DTMF Relay
VG200 doesnt support the above. But in other platforms it is supported in - 12.3(3)
Similar Messages
-
Hi,
I am getting B Channel OOS in my event viewer for a gateway in CCM.
Whats the reason for this. How can i rectify this. Can call get disconnected due to this. Please suggest.....
Help required immediately.Hi,
I am also seeing this issue with CCM 4.1(3)sr1, Windows 2000.2.7sr2. Intermittently there are multiple "Error: BChannelOOS - B channel out of service." (and D channel out of service) errors in Event Viewer for different MGCP gateways (remote and local, 3845 and 3725's). I am going to check the CCM/SDL traces the next time this happens, but if you have any other suggestions or information I would appreciated it.
Thanks,
GG -
How to retrieve error message(s) after failed web service call
Hi!
I tried to create an item using the web service ego_item_pub.process_item and it worked ok (version 12.1.1). Sending the same request again, I got an error which should be ok since the item id already exists. The thing is, that I only get an "E" as return status:
<X_RETURN_STATUS>E</X_RETURN_STATUS>
<X_MSG_COUNT>1</X_MSG_COUNT>
As described in the integration repository, there should be a parameter called msg_data which should contain the message if there is exactly 1 message, but I cannot find it.
So, I tried to get the message using fnd_message.get, but the response of my web service call is:
AuthorizationFailure : User not authorized to execute service. (I use sysadmin/sysadmin as ws security user).
I use the following grant details:
All Users Direct GLOBAL Revoke Action Enabled
SYSADMIN SYSADMIN Direct USER
What else can I do or how can I retrieve error messages for a failed web service call?
Thanks a lot,
KonradHi Konrad,
As we've found out, search the Integration Repository for internal name ERROR_HANDLER and use that. Letting the general public know the answer for this one!
Regards,
Gareth
http://garethroberts.blogspot.com -
trying to update my ipod but i get the error message network timed out. I've already uninstalled and reinstalled the latest version of itunes. I also do not have software update in settings on the ipod. How do i get the ipod to update?
Try the manual method specified here:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch -
trying to install adobe photoshop on macbook pro but at 50% it gives error message and kicks out disc
copy the disc contents to a desktop folder and click setup in that desktop folder.
if that fails what ps version are you trying to install and what is your os version? -
Image Manager : upload image - error message String index out of range
Hello,
i'm facing an issue with the upload functionality of 'Image Manager'.
When i upload a file, systematicaly an error message pops up :
"error message String index out of range : - XXX"
Where XXX is a value as large as the size of the file.
I have the feeling that the problem may come from the installation of VC.
Did someone encountered this issue ?
Thank youHi,
Plz check the below link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bip/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do
Govindu -
pls help my iphone 4 was on activation "required". i jailbroke it then it worked but some of the applications were crashing down,won't open. i tried a lot of tutorials and then error message 3194 came out. stucked in recovery mode,and then i use snowbreeze and then it worked!!!! but another problem came, i turned off my iphone then i switched it on again then it stucked in apple logo,.after doing some thing again 1604, 1600 bla bla bla came out..pls help me fix my iphone.
no help for jailbroken phones here-it's not allowed. good luck.
-
Revision: 15090
Revision: 15090
Author: [email protected]
Date: 2010-03-29 01:55:44 -0700 (Mon, 29 Mar 2010)
Log Message:
Bug: BLZ-506 - Unexpanded in error message from LocalFileResolver related to services.configuration.file
QA: No - I already tested.
Doc: No
Checkintests: Pass
Details: Applied customer's patch.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-506
Modified Paths:
blazeds/trunk/modules/common/src/flex/messaging/config/LocalFileResolver.java
blazeds/trunk/modules/common/src/flex/messaging/errors.propertiesRemember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.
-
QL statement or script failed. DIAGNOSIS: Error message: ORA-27102: out of
Dear all,
please help me4 on this
i am getting this error
FCO-00011 The step createDatabase with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbBuild|ind|ind|ind|ind|5|0|createDatabase was executed with status ERROR ( Last error reported by the step :Caught ESAPinstException in Modulecall: ORA-27102: out of memory
SVR4 Error: 22: Invalid argument
Disconnected
my logs are:
sapinst.log
ERROR 2011-12-18 09:40:34.550
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: ORA-27102: out of memory
SVR4 Error: 22: Invalid argument
Disconnected
. SOLUTION: For more information, see ora_sql_results.log and the Oracle documentation.
ERROR 2011-12-18 09:40:34.558
MUT-03025 Caught ESAPinstException in Modulecall: ORA-27102: out of memory
SVR4 Error: 22: Invalid argument
Disconnected
ERROR 2011-12-18 09:40:34.717
FCO-00011 The step createDatabase with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbBuild|ind|ind|ind|ind|5|0|createDatabase was executed with status ERROR ( Last error reported by the step :Caught ESAPinstException in Modulecall: ORA-27102: out of memory
SVR4 Error: 22: Invalid argument
Disconnected
INFO 2011-12-18 09:57:09.852
An error occured and the user decided to stop.\n Current step "|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbBuild|ind|ind|ind|ind|5|0|createDatabase".
INFO 2011-12-18 09:57:15.747
Creating file /tmp/sapinst_instdir/.lastInstallationLocation.
INFO 2011-12-18 09:57:16.545
Creating file /tmp/sapinst_instdir/ERPEhP4/AS-ABAP/ORA/CENTRAL/__instana_tmp.xml.
oracle_sql_results.log
SQL*Plus: Release 10.2.0.4.0 - Production on Sun Dec 18 09:40:34 2011
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to an idle instance.
ORA-27102: out of memory
SVR4 Error: 22: Invalid argument
Disconnected
SAPINST: End of output of SQL executing program /oracle/PRD/102_64/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2011-12-18, 09:40:34 SAPINST ORACLE stop logging
alert_prd.log
Sun Dec 18 09:40:34 2011
Starting ORACLE instance (normal)
Sun Dec 18 09:40:34 2011
WARNING: EINVAL creating segment of size 0x000000d8001b2000
fix shm parameters in /etc/system or equivalent
please sujest the solution very urjent pz........Dear deepak
itried to start the database manually
but it is not working.
SQL> startup
ORA-27102: out of memory
SVR4 Error: 22: Invalid argument
SQL>
and my shm parametrs for the Solaris ACCORDING TO NOTE 724713 are
projadd -p 333 -c "SAP System PRD" \
-U prdadm,oraprd \
-K "process.max-file-descriptor=(basic,65536,deny)" \
-K "process.max-sem-nsems=(priv,2048,deny)" \
-K "project.max-sem-ids=(priv,1024,deny)" \
-K "project.max-shm-ids=(priv,256,deny)" \
-K "project.max-shm-memory=(priv,18446744073709551615,deny)" \
dr
projmod -s \
-K "process.max-file-descriptor=(basic,65536,deny)" \
-K "process.max-sem-nsems=(priv,2048,deny)" \
-K "project.max-sem-ids=(priv,1024,deny)" \
-K "project.max-shm-ids=(priv,256,deny)" \
-K "project.max-shm-memory=(priv,18446744073709551615,deny)" \
user.root
prdadm::::project=dr;oraprd::::project=dr
thanks & Regards
k.Phani Krishna -
Error message - pulling hair out
Hi forum
I am pulling my hair out.
Every time I start Prem Pro I get the following message
“Prem pro could not find any capable video play modules – Please update your video display drivers”
Now this started suddenly yesterday and I have been using the programme all last week for a job I am half way through with no issues. It was very sudden
I am running vista 64 bit and an ATI radeon X1050 graphics card. 4GB ram
I have tried following
1/ disable anti virus and firewall - no
2/ system restore - no (twice)
3/ update video driver - no
4/ uninstall and reinstall cs4 suite
5/ msconfig - startup with no other applications or services - no
6/ kick the machine - no !!!
I am really at a loss. I have seen a couple of forums on the web covering this subject but so far nothing has helped me.
Any ideas please
AndyAndy,
3/ update video driver - no
As per the error message's text, this would have been my guess. Now, did you update with the latest driver directly from the ATI site? Can you roll-back to an earlier driver and try that? Can you check to see that your vid-card is, in fact, using the newly installed driver? Sometimes, installing an updated driver is not the most simple of tasks. With Matrox, one must first remove the old driver, reboot, then install the new one - don't know if that is still true. However, each site should have specific instructions on the exact steps required.
When things like this change, it's often some hot-fix from MS. Some can be rolled-back with System Restore, though a few cannot. Often, these will fritz both Audio and Video drivers quickly.
Though less often a fix in PrPro, than in PS, you might want to Move your Prefs files, and let PrPro rebuild them. You'll obviously have to change them, should you have any custom settings from default. Again, this is seldom necessary in PrPro, but happens to fix many PS problems.
Nothing else that I can think of right now.
Good luck,
Hunt -
Error Message when we create a Service Ticket in SAP CRM 2007
Hi All we are having a serious production issue when we create a S.Ticket in SAP CRM 2007 We get the following error message we are not trying to send any information to R/3 We have a planned go live this saturday. So any help would be greatly appreciated.
An error occurred in system EDIES during account assignment
Message no. CRM_ORDER_MISC 060
Diagnosis
Errors occurred when assigning an account assignment object to a business transaction. To view the error message, see the accompanying log file.
Transfer Log
No controlling type could be determined (Notification E IAOM 012)
No controlling type could be determined (Notification E IAOM 012)
Regards
SathyaHi,
I have looked into your issue.
For this service ticket, kindly check the Org Unit maintained in Transaction and table OFIC_BILLORG_SRV are same. If not same kindly make changes in the following path in SPRO.
==> SAP Implementation Guide
==> Customer Relationship Management
==> Organizational Management
==> Cross-System Assignment of Organizational Units
==> Assign Billing Units to Service/Sales Organizations
If the above information is not helpful kindly take a look at note 861116.
I hope this helps.
Regards,
Venkat -
HP Photosmart D110 Series getting error message when connecting to web services
Hello guys!
Hope someone can help. We have a HP Photosmart D110 series that is a couple years old. I am trying to get it connected to the web services feature for my wife. When we first got the printer it connected with no problems. When I go and click on enable web services it tells me cannot connect to server. Same error message happens when I try to do a product update. I tried to change manual preferred to 8. 8. 8. 8. and manual alternate to 8. 8. 4. 4. with no luck.
Any help would be greatly appreciated!
Thanks!!!
DanielHi Daniel, is there a chance that something has change in the intervening time in your home network e.g. a new router? This link contains a list of suggested troubleshooting steps to take if you're experiencing connectivity issues with HP Cloud Services. Try working down through them to isolate and correct the problem that is preventing you getting the D110 to connect to ePrint http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/ePrint-Apps-Connecti...
Post back with how you get on.
Best.
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee. -
When opening PE 11, error message : online services could not be initialized. Please reinstall appears. Reinstalls does not fix problem. What do I do next?
You should be able to launch without ols. Can you try directly from the application in the following location:
C:\Program Files(x86)\Adobe\Photoshop Elements 11
Double click on:
PhotoshopElementsEditor.exe
Let us know if that works.
If not, try downloading the missing file from the following link (it says PSE10 but should work) and unzip the folder to extract the file and drag it into the assets folder.
http://helpx.adobe.com/photoshop-elements/kb/welcome-screen-keeps-running-auto.html
If that doesn’t work I would suggest uninstalling via the control panel and installing from a fresh download. You can download the free trial from this link and then validate with your serial number.
http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us&PID=2159997 -
Error Message: The Adobe InContext Editing service is currently unavailable
Hey Folks,
For the past week, my client is getting the folowing error message when he tries to log in:
The Adobe InContext Editing service is currently unavailable.
We are sorry for any inconvenience this may cause you. Please try again later.
However we can access the editor from another computer without without problems.
He is in a different country and he had been using the editor for quite a few months now.
Have the minimum requirements changed?
Thanks,
[email protected]That's correct Corey.
The client is in Cyprus accessing the editor through a Firefox browser, which he had been successfully doing for some time now.
His representative, using the same login and password in Canada is able to access the editor fine.
I've since sent him a seperate login invitation
I've asked him to try another browser / computer.
update his flash
He said his flash wouldn't update, so I don't know if it's an issue with his browser, computer, or user.
I'm waiting on the other two action items.
Thanks for your involvement. -
I have a dell 64 bit pc and had an older version of ITunes installed. When I tried to install the 12--- version, the install stopped with the message, "Apple Mobile Device Services failed to start, verify that you have sufficient privileges to start systems services". I have no clue what that means. can anyone help. ????
Hi doywks,
The Apple Mobile Device is a component of iTunes that communicates between your computer and your iPhone or iOS device. The error message you are seeing "verify that you have sufficient privileges to start system services" has to do with the Windows operating system. It's possible that you are not logged in as the administrator for your Windows PC. Or, you may have antivirus software stopping the Apple Mobile Device from running.
If you are having issues updating iTunes on your PC, follow the steps in the article below.
If you can't install or update iTunes for Windows - Apple Support
https://support.apple.com/en-us/HT201668
How to restart the Apple Mobile Device Service (AMDS) on Windows - Apple Support
https://support.apple.com/en-us/HT203188
I hope this information helps ....
- Judy
Maybe you are looking for
-
Hi. I have been having problems with my iphone 4s ios 6.?? heating up alot, draining the battery fast. It goes down to about 20% before half the day is over. I still have 4GB left (from a 64GB iphone) and don't have anything functioning, (other than
-
Error in connect to database2EETW169 no connect possible: "DBMS = ORACLE
Dear All, I am facing probem in sarting the sap after system copy. Database is up and running .Please find the logs There error it can connect to database r3trans log This is r3trans version 6.09 (release 640 - 26.10.04 - 15:45:42). unicode enabled v
-
No Network given for transaction 0020
While posting invoice (tcode MIRO) against PO, i am having error "No Network Given for transaction 0020". The PO is having account assignment "N" Network and 0020 is the activity number. Any idea how to resolve this. Regards, Shahzad Shakoor
-
I was going to update the ipod touch to see if it would update the battery power, however it won't actually turn on now... and i have spent alot of money on songs and I want them back how can I get them?
-
I noticed that I can no longer use the core audio setup assistant in express 8. In 7, I could adjust the amount of tracks, buses ect. They have apparently got rid of that feature in 8. So now I have 64 buses and instead of setting the record max time