An error message uploading "large" files

Hello!
I'm getting an error message uploading "large" files (40-70 mb) - "unable to sync "file_name" due to server error". This message occurs only with a "large" files. The files up to 10 mb syncs perfectly and all of my files are correct (no issues with a "Windows-reserved / trailing" characters or "files in use").
I pay 90 usd montly to Adobe and still need to use free services like Wetransfer or Dropbox. Please help.
Thank you!
Mindaugas

I'm having this same problem and have written other posts but no replies. The file size for a single file is supposed to be something like 1-2 gig. How can a 40-70 meg file not work? It seems like the cloud storage feature is a selling point only and not fully realized yet. I love the interface and the idea but it's unrelaible to sync up, leave work, arrive home and no "larger" files are available. Yep, back to Dropbox and Google drive unfortunately.

Similar Messages

Error message exporting large picture file from Aperture 3.5

Recently I took a large panaramic comprised of 165 pictures using Gigapan Epic Pro and stitched together using software provided with Gigapan. I exported the stitched file into Aperture to perform final edits. When I go to export the final version I keep getting an error message. The file size will be approximately 2.0 GB. I've been able to export a 0.7 GB file without problems (it did take several minutes). I have a late 2009 27" iMac with 3.3 GHZ Intel Core 2 Duo processor and 16 GB memory. Any suggestions? Not sure if this is an Aperture problem or if my system is not up to the task. Below is the error mesage I receive. Thanks for your assistance.

Testing: Exporting a large TIFF - the original is 24512 × 23016 (564,2 MP), 1.05 GB
The exported file that I am seeing on my Desktop after 10 minutes, is showing this in the Preview:
But after exporting there was no message at - neither an error message nor the usual alert when finished "Export 1 version completed - Reveal ...".
So, I am not yet conviced that the export went well, but Aperture can export gigantic TIFFs.
What is the file format you have been using? My test was done with TIFF, 16 bit.
Aperture 3.5.1

I have an error message "page_bottom_overlay-2.png" which comes up when I try to publish. There is a large X with a Question mark in the middle over the entire background of the page. The error message says the file is missing. I did not delete files.

I have an error message "page_bottom_overlay-2.png" which comes up when I try to publish. There is a large X with a Question mark in the middle over the entire background of the page. The error message says the file is missing. I did not delete files. How can I find files that seem to be missing?

This is probably one of the files that is required by the template you are using.
These files are inside the iWeb app. Control click the iWeb app icon and select "Show package contents".
You need to dig down through the folders and files to find what you want...
Contents/Resources/da.lproj/Templates/
If the file is missing you would need to re install the iWeb app...
http://www.iwebformusicians.com/iWeb/iWeb-Tips.html

"Not connected to internet" error only when uploading large files.

Hi,
I have a strange problem that occurs when im uploading large files to any of my servers....
The files upload just fine but while im uploading im unable to use the internet for anything else. For example if I try to open a web page I get an error saying im not connected to the internet. This error will persist until the file finishes uploading.
Its a strange and annoying problem and was wondering if anybody could throw any light on the problem.
I cant be sure but it may have coincided with me connecting a new Netgear wireless modem router.
Many thanks
Matt

Hi Sorry, only just noticed your reply. Didn't get an email alert like I usually do.
Thanks for that. To be honest I have no idea what QOS is but I will take a look at the routers settings to see if it makes sense to me.
Thanks
Matt

I get an error message saying the file is too large. It is smaller than 1GB.

I am trying to open a Keynote presentation on the icloud and I get an error message saying the file is too large. It is 56.76MB so it should open right?

Hi jltaylor6,
Welcome to the Support Communities! What is the size of your available iCloud storage? It sounds like this may be the issue in opening the document?
Size limits of iWork for iCloud beta documents - Apple Support
http://support.apple.com/en-us/HT202900
All iWork for iCloud beta apps
Up to 100 people can edit a document at the same time. Each document can be up to 1 GB. These documents use your iCloud storage, so the size of all your files on iCloud.com can’t be more than your total storage limit.
Manage your iCloud storage - Apple Support
http://support.apple.com/en-us/ht4847
I hope this information helps ....
- Judy

Upload large file in sharepoint

hi
is it possible upload large file in sharepoint in our scenario we need upload large file >3gb in document libraries
where sharepoint store files? is there any way we can have a custom aspx page for uploading large files in chunks in document library?
kindly suggest.
Thankyou

is not possbile upload more than 2Gb
If you try to upload big files you will need to make some change on your Sharepoint to support the 2Gb.
Error message when you try to upload a large file to a document library on a Windows SharePoint Services 3.0 site: "Request timed out"
http://support.microsoft.com/?id=925083
With files bigger than 2GB can recomend creeate linked files to that files where you can download.
André Lage Microsoft SharePoint and CRM Consultant
Blog:http://aaclage.blogspot.com
Codeplex:http://spupload.codeplex.com/http://simplecamlsearch.codeplex.com/

OOM happens inside Weblogic 10.3.6 when application uploads large files

Oracle Fusion BI Apps application is uploading large files (100+ MB) onto Oracle Cloud Storage. This application works properly when ran outside weblogic server. When deployed on Fusion Middleware Weblogic 10.3.6, during upload of large files we get this OOM error
java.lang.OutOfMemoryError: allocLargeObjectOrArray: [B, size 268435472
    at jrockit/vm/Allocator.allocLargeObjectOrArray(JIZ)Ljava/lang/Object;(Native Method)
    at jrockit/vm/Allocator.allocObjectOrArray(Allocator.java:349)[optimized]
    at weblogic/utils/io/UnsyncByteArrayOutputStream.resizeBuffer(UnsyncByteArrayOutputStream.java:59)[inlined]
    at weblogic/utils/io/UnsyncByteArrayOutputStream.write(UnsyncByteArrayOutputStream.java:89)[optimized]
    at com/sun/jersey/api/client/CommittingOutputStream.write(CommittingOutputStream.java:90)
    at com/sun/jersey/core/util/ReaderWriter.writeTo(ReaderWriter.java:115)
    at com/sun/jersey/core/provider/AbstractMessageReaderWriterProvider.writeTo(AbstractMessageReaderWriterProvider.java:76)
    at com/sun/jersey/core/impl/provider/entity/InputStreamProvider.writeTo(InputStreamProvider.java:98)
    at com/sun/jersey/core/impl/provider/entity/InputStreamProvider.writeTo(InputStreamProvider.java:59)
    at com/sun/jersey/api/client/RequestWriter.writeRequestEntity(RequestWriter.java:300)
    at com/sun/jersey/client/urlconnection/URLConnectionClientHandler._invoke(URLConnectionClientHandler.java:213)
    at com/sun/jersey/client/urlconnection/URLConnectionClientHandler.handle(URLConnectionClientHandler.java:149)
Looks like weblogic is using its default Weblogic HTTP handler, switching to Sun HTTP handler via start up JVM/Java Option "-DUseSunHttpHandler=true" solves the OOM issue.
Seems instead of streaming the file content with some fixed size byte array its being on the whole file into memory during upload.
Is it possible to solve this OOM by changing any setting of Weblogic HTPP handler without switching to Sun HTTP handler as there are many other application deployed on this weblogic instance?
We are concerned whether there will be any impact on performance or any other issue.
Please advice, highly appreciate your response.
Thanks!

Hi,
If you have a back then restore the below file back and then try to start weblogic:
\Oracle\Middleware\user_projects\domains\<domain_name>\config\config.lok
Thanks,
Sharmela

Error message: The selected file cannot be linked because it has 6 audio channel(s) and the clip was

I recently purchased/upgraded from Premiere Elements 5 to Premiere Elements 9 and I cannot open the projects in version 9 that were created with version 5. It shows it as offline. I get a message to open up a file and when I do i receive the error message: The selected file cannot be linked because it has 6 audio channel(s) and the clip was created with 2 audio channels. Can someone help me or tell what I am doing wrong? All of my projects that were completed in version 5 cannot be opened up in version 9.
Thank you.

Bill,
I ran G-Spot on one of the files and here it what I have:
DVD "VOB" format
MPEG-2 Program Stream << { 1 vid, 1 aud }
Sys Bitrate: 10080 kb/s VBR
I guess I am really confused. The project that I am trying to open PrE 9 was completed in PrE 3 w/templates , scenes, etc. The movie was burned to a DVD. I cannot understand why I cannot open it with a newer version of PrE. According to G-Spot (I am assuming this is what you mean above), it is already in 2 channels. To me this should be ok. I put many, many hours into these videos and now it seems all for not.
Here is what I did so far:
I uploaded the required media files to a new project in PrE9 and let them index and conform. I saved the project with the same name in a different location. Do I have to do this to the project files and/or the original media files? Confusion starts here.
The next step is where I am confused. I do not know if I am proceeding in the right direction from here. There is the share tab in the upper right hand corner. Is this what you are talking about? I am truly lost from here.
Thanks.

FTP Delivery error when uploading big file

Hi,
I've setup a Schedule with Delivery through SFTP. Usually (when the output size is not very big) it works fine.
However, when my report (pdf) is too big, the job's status remains "Running" forever. When I go to my FTP directory the file's size is always 91.906.794 bytes. I checked BI Publisher's cache and the generated output is there but its size is always bigger than 91.906.794 bytes. That file works fine when I open it in Adobe Reader.
Somehow, it seems that BI Publisher can't upload files bigger than 91.906.794 bytes but I can't find any maximum size in the documentation. And besides, I guess that if there was any maximum size, it should throw an error instead of getting stuck in "Running" status.
I'm running Oracle BI Publisher version 11.1.1.6.0 in Red Hat Enterprise Linux Server release 5.5 (Tikanga). I've tested this feature in 2 different servers and the result is exactly the same.
Anyone had this problem?
Thank you,
Tiago

Hello,
Here is the all possible fixes to upload large file, please check and verify with your settings:
http://blogs.technet.com/b/praveenh/archive/2012/11/16/issues-with-uploading-large-documents-on-document-library-wss-3-0-amp-moss-2007.aspx
http://blogs.technet.com/b/sammykailini/archive/2013/11/06/how-to-increase-the-maximum-upload-size-in-sharepoint-2013.aspx
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

UCCX 8.0 "Error while uploading the file. Please try again."

I was on UCCX version 8.0.2.11003-10 and i was able to upload an script with the same name as an old one (overwrite).
Upgrade to UCCX 8.0.2.11004-12 and now I am receiving the error: "Error while uploading the file. Please try again."
There was a bug CSCth09248 that affected version 7 but supposed to be fixed on version 8 and was fixed on an earlier version. But after moving to a minor patch, problem came back...
Any ideas?

Hi,
I belive the bug was initially opened to fix the issue when uploading script fails when using wizard to configure uccx.
But now they have re-opened the same bug instead of opened a new one for the issue that you have.
I looked at the case attached to that bug, case # 617145545. Below is the problem description that customer has which is same as yours and this bug has been re-opened to fix this particular problem.
When I tried to upload a modified script with an existing file name, the message "script file already exists.
Overwrite existing script file, continue?" comes up and when I select "OK" then,
it dispaly Status "Error while uploading the file. Please try again".
If I remove an existing file first, it will upload fine.
Using UCCX Admin 8.0.2.11004-12 and UCCX Editor 8.0(2.0).
Thanks
Ankita

I am unable to open a project that I have worked on and saved. I get an error message that the file is damaged and cannot be opened.

I am unable to open a project that I have worked on and saved. I get an error message that the file is damaged and cannot be opened.

Leslie Tanaka
Travel and detours have kept me from following up sooner. If the problem that you wrote about still persists.....
Let us go back over that Adobe document regarding troubleshooting damaged projects.
3. Delete the Application Preferences
Where you able to follow that path and delete the Adobe Premiere Elements Prefs file at the end of the path? And, after you did, did the saved/closed programs still refuse to open? If you could not carry out this procedure, what were the limiting factors that kept you from do
7. Test to see if individual media files are causing the problem.
That is an important one. How far did you get into following the instructions given in the document? If you could not complete the test, what was the major block that prevented you from doing so?
I want to make sure that we have gone through everything in that document and ruled all factors there in or out. If it was a matter of you not understanding the instructions, I am hoping that the above will channel you questions to me so that I can clarify anything that you did not understand in the Adobe document instructions.
I do not recall if I asked previously. Even if you cannot open all your saved/closed projects, can you still open a new project and save/close it? Maybe even reopen it?
Please review and consider.
Thank you.
ATR

My iTunes won't open on my laptop. Error message says The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. Help Please!

My iTunes won't open on my laptop. Error message says The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. Help Please!

See Empty/corrupt iTunes library after upgrade/crash.
tt2

After editing a photo, I sometimes get an error message that the "File is empty". Can revert to original and start again, but file disappears after editing.

So frustrating! I open the photo. Edit by cropping, adjusting color, etc. It's perfect. I click DONE and move on to the next. When I come back, the first photo is gone. I can see it in the album but cannot open it. When I look at the file information, it shows zero KB. If I move it to the desktop and try to open it, the error message says the file is empty. I can revert to original and there it is. Edit again, and again it disappears. What am I doing wrong? I am using iPhoto 09

You shooting with a Nikon? We've seen a few examples of this bug with Nikons on 09 and 10.6, with no solution except to upgrade.
Regards
TD

Getting error while uploading multiple files in sharepoint hosted app in 2013 with REST API

Hi All,
In one of my tasks, I was struck with one issue, that is "While uploading multiple files into custom list with REST API".
Iam trying to upload multiple files in library with REST calls for an APP development, my issue is if i wants to upload 4 image at once its storing only
3 image file and further giving "Conflict" error". Below is the attached screenshot of exact error.
Error within screenshot are : status Code : 409
status Text :conflict
For this operation i am uploading different files as an attachment to an list item, below is the code used for uploading multiple files.
my code is
function PerformUpload(listName, fileName, listItem, fileData)
var urlOfAttachment="";
// var itemId = listItem.get_id();
urlOfAttachment = appWebUrl + "/_api/web/lists/GetByTitle('" + listName + "')/items(" + listItem + ")/AttachmentFiles/add(FileName='" + fileName + "')"
// use the request executor (cross domain library) to perform the upload
var reqExecutor = new SP.RequestExecutor(appWebUrl);
reqExecutor.executeAsync({
url: urlOfAttachment,
method: "POST",
headers: {
"Accept": "application/json; odata=verbose",
"X-RequestDigest": digest
contentType: "application/json;odata=verbose",
binaryStringRequestBody: true,
body: fileData,
success: function (x, y, z) {
alert("Success!");
error: function (x, y, z) {
alert(z);

Hi,
THis is common issue if your file size exceeds
upload a document of size more than 1mb. worksss well for kb files.
https://social.technet.microsoft.com/Forums/office/en-US/b888ac78-eb4e-4653-b69d-1917c84cc777/getting-error-while-uploading-multiple-files-in-sharepoint-hosted-app-in-2013-with-rest-api?forum=sharepointdevelopment
or try the below method
https://social.technet.microsoft.com/Forums/office/en-US/40b0cb04-1fbb-4639-96f3-a95fe3bdbd78/upload-files-using-rest-api-in-sharepoint-2013?forum=sharepointdevelopment
Please remember to click 'Mark as Answer' on the answer if it helps you

I have LR 5. When I'm in the book module and select the option to "Send Book to Blurb" i get an error message saying "The file does not have a program associated with it...." How do I fix this?

I have LR 5. When I'm in the book module and select the option to "Send Book to Blurb" i get an error message saying "The file does not have a program associated with it for performing this action. Please install a program, or if one is already installed, create an association in the Default Programs control panel."
How do I fix this?

Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

An error message uploading "large" files

Similar Messages

Maybe you are looking for