An Error message with CSM, require an expert advice

Dear Experts,
I had some difficulties deploying changes to the IPS as it would give me an error stating PG.IPS.IpsAllowedHosts and something along the lines of require at least one host stated including the CSM address. However the CSM IP address has already been added in the list of allowed hosts on the CSM and it the error is still there!
Has anyone encountered similar issues or have any suggestion as to what could be causing it?
Thanks and regards,

Please give us the error message you were getting when deploying.
PK

Similar Messages

  • I tried to sync my Macbook Pro photos in iPhoto with my iPod Touch.  I have done this numerous times, but today I got an error message saying the required file cannot be found.  At the same time all of my photos on my iPod vanished.  Can anyone help me?

    I tried to sync my Macbook Pro photos in iPhoto with my iPod Touch.  I have done this numerous times, but today I got an error message saying the required file cannot be found.  At the same time all of my photos on my iPod vanished.  Can anyone help me?

    Try deleting the photo cache from your computer and then re-try the photo sync - the location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314

  • TS1717 Having trouble running iTunes version 11.0.2 on a Dell Laptop running Windows 7 Professional Service Pack 1.  Keep getting an error message "the software required for communicating with iPods and mobile phones was not installed correctly..." reinst

    Having trouble when I launch iTunes (version 11.0.2) on my Dell Laptop running Windows 7 Professional (service pack 1).  I get an error message indicating software required to communicate with iPod and mobile phones was not installed correctly.  Do you want iTunes to try to repair this for you?  I normally respond with OK and it immediately tells me "could not be repaired.  Please reinstall iTunes..."  I have done this a number of times to no avail.

    I also notice Quicktime is not getting installed at all.
    That one is normal nowadays (ever since the iTunes versions 10.5.x).
    The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you?
    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • Error message with hyperlink

    Hi Champs,
    I have requirement in which I need to display an error message in SRM Portal.The error message is maintained in the SAP SRM system and can be viewed through SE91.
    We are using SRM 4.0 Version.
    I need to display the below error message with a hyperlink to a particular site:
    Profit Center of plant and CO do not match, CO belogs to plant XXXX (item link)"
    Is it possible to have hyperlink with an error message.
    Thanks
    Regards,
    Nishant

    Hello
    It is no possible.
    But you may add hyperlink into documentation for message (SE91 -> Goto -> Documentation -> Long text).
    In this case hyperlink will be available after double click on error icon in left bottom corner.
    PS: and not duplicate posts.

  • Raid 1 error message with ASC: 0x11, ASCQ: 0x0, FRU: 0xf

    Dear All,
    There is a error message with ASC: 0x11 (unrecovered read error), ASCQ: 0x0, FRU: 0xf
    And I reference the documentation at http://docs.oracle.com/cd/E19105-01/storedge.6320/817-5918-10/817-5918-10.pdf The error messages means:
    "The RAID controller firmware, during a normal read or volumes verification operation, corrects the bad sector on the drive by reconstructing the
    data (assuming a RAID 1+0 or RAID 5 configuration) and writing it back to the drive. The drive, in turn, writes the data to a spare sector.
    Ensure that the volume is scrubbed on a regular basis. If the volumes in the RAID device are configured as RAID 0,
    then the data is lost and drive replacement is required."
    But I am not understand if the harddisk in RAID 1. Is that the harddisk with problem will write the data to a spare sector but the other mirrored
    harddisk will not write to the spared block due to mirroring or they both write the data in the bad block to the spared block?
    If the data in the bad block moved to the spare sector in both mirrored harddisks.
    Is that the whole mirrored group will reuse the bad sector again after replacement?
    If the Mirror is built up by Veritas not the Solaris Volume Manager. Is there any difference?
    Thank You!
    Edited by: 960831 on 2012/9/23 下午 9:03
    Edited by: 960831 on 2012/9/23 下午 9:04

    It appears that SCSI disk #178, in an external array, has a bad data block
    and that the specific data block is #7564160. That data block
    additionally translates into sector #7560064 of LUN#1.
    Your computer system is finding it difficult to read whatever is in that part of the drive.
    Repair that disk by marking the block as unusable,
    or you can just replace the disk and rebuild the LUN.
    I've never had to do that, personally.
    That's what service contracts are for. The vendor does it for me.
    It seems that it is time for you to open a service case with the array vendor.

  • I want to backup my Mac to iCloud, but receive an error message recovery partition required.  Is this an easy fix?

    I want to backup my MacBook Pro to iCloud, but receive the error message "recovery partition required".  Is this easy to fix? 
    Thanks for your time.

    Sounds like your missing the partition. I have seen this before when I friend had a bad drive and took it in. Apple store replaced the driveamd installed lion but no partition. I had to reinstall lion from a full install DVD to build the recovery partition. Looks like you need to do the same. No data will be lost if you don't re-partition with the disk util. Just run the lion install from within lion and use the default. It will build the partition for you. Then re-run the apple updates for the 10.7.2 update which embeds the find my Mac part of iCloud in the recovery partition.
    Good luck.

  • I have an airport extreme and my computer runs Microsoft windows XP Media Center Edition 2005. I receive an error message saying " airport requires that your computer is running windows xp sp3 or windows vista sp1 or newer"...why?

    i have an airport extreme and my computer runs Microsoft windows XP Media Center Edition 2005. I receive an error message saying " airport requires that your computer is running windows xp sp3 or windows vista sp1 or newer"...why?

    It is required to be able to connect. Download SP3 here. http://www.microsoft.com/download/en/details.aspx?id=24
    I Hope I Was Able To Help You Or Solve Your Question.
    Simmm
    3/12/2012
    If Someone Helped You, Click
    "This Helped Me"
    If Someone Solved Your Question, Click
    "This Solved My Question"

  • I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

    I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

    Have you recharge the battery for at least 2 hours, or just leave it connected for 4 hours?
    (When you replaced the Hardisk, you should also replace the battery.)
    Some other iPod SSD sites, says that you may have to format the CF in FAT32, as Mac dont read NTFS drive so if Windows is the 1st PC that your CF is connected, it may be formatted to NTFS.
    You can try erasing the CF using Disk Utilty, so that Mac can recognise it. (but not Windows)
    Have a nice day!

  • Error message with offer to download the 4.1.B.0.587 update and note: "installation not possible" (because it's already there) cannot partition SD card

    Hi - Recently I put the latest update on my LT15i (4.1.B.0.587), after this I rooted the phone, and everything seemed okay. But since then I keep getting an error message with an offer to download the 4.1.B.0.587 update and the note: "installation not possible" (because it's already there). The news line on top shows a red exclamation mark all the time. It seems to me that it is due to this error that I cannot partition my SD card. Does anybody have an idea how to fix that? Thanks much in advance, and happy holidays - nerissa

    Moved thread to Android development.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • My mac book pro does not start but has error message with a question mark on screen. took it in and was told probably the hard drive as could not reconize it so bought new one but still not connecting.what do i do

    My mac book pro does not connect but shows an error message with a question mark on the screen.I took it to a retailer that said it was not reconizing the hard drive.He said i needed a new hard drive but it may be something else as well but he was sure a new hard drive would fix it.So putting faith in someone who deals with them i purchased a new hard drive to find it was still not working although he said the computer did know reconize the hard drive and i may have to send it away to get it checked .After already paying 120 pounds for a new hard drive and they wanting another 80.00 pounds to diagnose it i am a little sceptical.
    That's why i am interested on anyone's help.

    Welcome to the Apple Support Communities
    I think that your Mac detects your hard disk, but the problem is that your new hard disk doesn't contain any operating system, so your Mac doesn't find any bootable partition and you see a question mark.
    If your Mac came with DVDs, insert the Mac OS X Install DVD and hold the C key while your Mac is starting. Then, just install Mac OS X. If the hard disk isn't prepared to install Mac OS X, you will have to erase it using "Mac OS Extended (Journaled)". See > http://pondini.org/OSX/DU1.html

  • Displaying an error message with a link to the error field

    By default, ADF validation usually displays an alert with an error message and a link to the error field.
    I have some custom validations where I finally display the error message with this:
      public static void MessageError(String messageText){
        //String messageText="No se han encontrado estos datos";
        FacesMessage fm = new FacesMessage(messageText);
         * set the type of the message.
         * Valid types: error, fatal,info,warning
        fm.setSeverity(FacesMessage.SEVERITY_ERROR);
        FacesContext context = FacesContext.getCurrentInstance();
        context.addMessage(null, fm);
    My customer is asking for displaying a link to the error field in this kind of error alerts as standard errors do.
    Is there any way to get this ?

    Can't you include this in your message?
    You may want to check Duncan's blog https://blogs.oracle.com/groundside/entry/get_more_from_your_messages whichgives more inside on what you can do
    Timo

  • HT4910 My iCal has frozen after I tried to paste info from an email into a reminder.  I get a "server reports an error" message with what I tried to paste in the box.  Calendar is frozen and will only close by forcing it.  Any help?

    My iCal has frozen after I tried to paste info from an email into a reminder.  I get a "server reports an error" message with what I tried to paste in the box.  Calendar is frozen and will only close by forcing it.  Any help?

    Did another window open with the pasted information?  If so, try hitting "enter/return" key and "delete" key at the same time.  That should get rid of the current action on the ical, the extra window should go bye-bye, and all should be fine with the world.

  • Error Message with multiple line

    Hi
    How to display a error message with multiple line?
    Example
         Goods movement not possible for material 101
         Goods movement not possible for material 102
         Goods movement not possible for material 103
    is it possible is ABAP? If so please advice me.
    Best Regards
    Asheek

    Hi Anoop,
    You can use same thing like this
    I suggest write ur message through this.
    First set the obecj.
    CALL FUNCTION 'APPL_LOG_SET_OBJECT'
    for local memory
    FUNCTION 'APPL_LOG_WRITE_MESSAGES'
             EXPORTING
                  OBJECT              = OBJECT
                  SUBOBJECT           = SUBOBJECT
                  UPDATE_OR_INSERT    = UPDATE_INSERT_FLAG
             TABLES
                  MESSAGES            = MESSAGE_TABLE
             EXCEPTIONS
                  OBJECT_NOT_FOUND    = 1
                  SUBOBJECT_NOT_FOUND = 2
                  OTHERS              = 3.
    the call for physical memory
    CALL FUNCTION 'APPL_LOG_WRITE_DB'
    In this process you only need to provide the Itab with error messages.
    Reg,
    Arpit

  • How to display custom error message if the Required field is not entered?

    Hi,
    I have made one input field as required field in a view.
    I want to display one custom error message ,if the required input field is not entered.
    Please help me regarding this.
    Thanks,
    Deepika

    hi deepika....
    First go to message pool under webdynpro components.
    Create a new message there..of type error.
    Enter your text.
    Now to avoid null pointer exception , in wdDoInit(), initialise the value
    wdContext.currentDateTimeElement().setDate("");
    now create an action for submission of data. If field is empty, then within the button write:
      msg = wdComponentAPI.getComponent().getMessageManager();
        if(wdContext.currentDateTimeElement().getDate().equals(""))
        msg.raiseMessage(IMessageCompTodatDateTime.ERROR,new Object[]{""},true)     ;
    between begin others put:
    regards,
    pinki
      IWDMessageManager msg = null;

  • I try connecting to I tunes i get an error message with the error message IxE000068 any ideas

    my ipod touch will continually be in the spinning wheel like it is shutting down mode and occasionally go to the start up screen nothing else. i tried connecting to the itunes and got an error message with the code IxE8000068 and saying itunes could not be connected to this ipod

    Did the error number really start with
    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

Maybe you are looking for

  • How to see the dropdown option for field of a table during selection

    Hello, I am adding a new custom field in the table. Now when user goes to the screen after clicking the content button icon in se11, he sees all fields for selection. That custom field is one character field. I want the user to see P and S option whe

  • Issue in xml to tab seperated content conversion

    Hi, I am having proxy to file scenario, in few columns data is coming like "AAA""B, in moni, xml data seems to be fine, but when the Excel file is genertaed at the FTP, the leading cell values are getting appended to this value. e.g. A     B     "ABC

  • Need help in Performance tuning for function...

    Hi all, I am using the below algorithm for calculating the Luhn Alogorithm to calculate the 15th luhn digit for an IMEI (Phone Sim Card). But the below function is taking about 6 min for 5 million records. I had 170 million records in a table want to

  • Can I do this with Automator?

    Hi, Sorry for the newb question. I want to create a macro that will let me do the following: 1. Open System Preferences 2. Select "Sound" I'd be happy if it just that; however, if it would switch to built-in "headphone" port for the output, that woul

  • Opinion of ORACLE personal/ Lite for a Palm subsystem

    I am trying to decouple an existing Palm subsystem from an application. This would involve no change to the software on the Palm but would mean having to keep a small database on a PC. Can somebody confirm for me that (i) Lite is strictly a piece of