An error occured in the claim providers configured from this site collection

Hi Team
I have farm Environment.I have Couple of Question
1)I have enabled web application from classic to claims mode.
    Since than i have been getting error in sites in that Particular Webapplication.
    I have configured CA,Webapplications Alternate acess Mapping.
   In the farm i have 4 Servers
2) In one of the server i do not have Central Admin site in IIS.IS this causing error.
3) Also can anyone tell how to run services on Servers in details
can anyone throw light on my issue

Hi Prashanth,
Can you describe that error here ?
Also how did you create AAM by extending a web application from central admin or by just putting url into IIS ?
Let us know your results, thanks
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful.

Similar Messages

An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database. mail will not be sent.

Hii all,
I have a subscription which used to send report email daily 10 am morning
now today it does not sent an email the status i s showing above error message ..
why this occurs ?? at the time of subscription running time ??
i have checked there is not error of subscription it runs fine ..
only today errored ..
Kindly , help me
Dilip Patil..

Hi Dilip,
Based on the error message "An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database." it seems the issue is caused by the Report Server catalog databases are
corrupted.
To fix this issue, I suggest that you use the Reporting Services Configuration Manager to recreate the Report Server catalog databases. In addition, please make sure report server instance can connect to the report server database. For more details about Configure
a Report Server Database Connection (SSRS Configuration Manager), please see the following document:
http://msdn.microsoft.com/en-IN/library/ms159133.aspx
Besides, if the issue is caused by the connection to the SQL Server Reporting Services Report Server catalog database is timeout. Please refer to the following thread:
http://social.technet.microsoft.com/Forums/en-US/db4ca6c2-5445-4ff9-9f63-e20f3859cc70/error-throwing-microsoftreportingservicesdiagnosticsutilitiesreportserverstorageexception-an?forum=sqlreportingservices
If the problem is still existed, I would appreciate it if you could give us detailed error log, it will help us move more quickly toward a solution.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

I have a new laptop and I am trying to download CS3. The site on adobe gives an error message and the one I tried from this forum downloaded CS3 extended, so my serial number does not work. Does anyone have any suggestions. Regards Vicki

Hi,
I have a new laptop and I am trying to download CS3. The site on adobe gives an error message and the one I tried from this forum downloaded CS3 extended, so my serial number does not work. Does anyone have any suggestions. Regards Vicki

The trial is always extended. The serial number you enter determines whether it runs as standard or extended.
I'm getting through fine with that link, so it must be a browser issue or some such thing. Try another browser.

The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the

When i tried to login in inbrowserediting.adobe.com i see that:
The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user.
What does it mean? What is problem?

Hi,
I have just created my First website using Muse and Its all been uploaded to my FTP server but i cant access the in browser editing which was the whole reason why i re-done the website for my client using muse
its saying the following
"The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user. server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user."
Yet i Can access my website fine "www.calmwood.com.au"
My ftp server responds to either the IP Address or the DNS Address www.calmwood.com.au
so i am not understanding how it thinks its different. when its fully referenced
any help would be appreciated.
thanks

I want to ask you if i will buy the ipad mini wifi from this site,after can i use it in Europe without problems?

i want to ask you if i will buy the ipad mini wifi from this site,after can i use it in Europe without problems?
Thank you

Wifi is wifi (generally) and you should be able to take your american bought device (presuming that's what you mean) to europe and get it online.
The biggest issue you may face is to make sure you have a plug adapter. Your power brick is rated for world wide power variances you'll just need an adapter to make the plug fit eurpoean plugs.

SSRS 2008R2 Error: An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database

Hi,
a big problem with our report server has appeared suddenly.
We are running the SQL Server 2008 R2 with a Report Server. But a .
I can connect to the Report Server Website and I can choose a report. But if I run the report, it will load endless without timeout message or other error messages.
I looked in the Report Server Log and find out this confusing error messages:
rshost!rshost!1680!01/21/2014-16:22:41:: e ERROR: WriteCallback(): failed to write in write callback.
rshost!rshost!1680!01/21/2014-16:22:41:: e ERROR: Failed with win32 error 0x0079, pipeline=0x00000000004ED8D0.
rshost!rshost!c20!01/21/2014-16:22:41:: e ERROR: HttpPipelineCallback::SendResponse(): failed async writing response.
rshost!rshost!c20!01/21/2014-16:22:41:: e ERROR: Failed with win32 error 0x0079, pipeline=0x00000000004ED8D0.
rshost!rshost!1680!01/21/2014-16:22:41:: v VERBOSE: HttpPipeline::DisconnectCallback: releasing pipeline=0x00000000004ED8D0.
httpruntime!ReportManager_0-1!c20!01/21/2014-16:22:41:: e ERROR: Failed in BaseWorkerRequest::SendHttpResponse(bool), exception=System.Runtime.InteropServices.COMException (0x80070079): The semaphore timeout period has expired. (Exception from HRESULT: 0x80070079)
at Microsoft.ReportingServices.HostingInterfaces.IRsHttpPipeline.SendResponse(Void* response, Boolean finalWrite, Boolean closeConn)
at ReportingServicesHttpRuntime.BaseWorkerRequest.SendHttpResponse(Boolean finalFlush)
library!ReportManager_0-1!c20!01/21/2014-16:22:41:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerHttpRuntimeInternalException: RsWorkerRequest::FlushResponse., Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerHttpRuntimeInternalException:
An internal or system error occurred in the HTTP Runtime object for application domain ReportManager_MSSQLSERVER_0-1-130347907277948893. ---> System.Runtime.InteropServices.COMException (0x80070079): The semaphore timeout period has expired. (Exception
from HRESULT: 0x80070079)
at ReportingServicesHttpRuntime.BaseWorkerRequest.SendHttpResponse(Boolean finalFlush)
at ReportingServicesHttpRuntime.RsWorkerRequest.FlushResponse(Boolean finalFlush)
--- End of inner exception stack trace ---;
httpruntime!ReportManager_0-1!c20!01/21/2014-16:22:41:: e ERROR: Failed in BaseWorkerRequest::SendHttpResponse(bool), exception=System.Runtime.InteropServices.COMException (0x80070079): The semaphore timeout period has expired. (Exception from HRESULT: 0x80070079)
at Microsoft.ReportingServices.HostingInterfaces.IRsHttpPipeline.SendResponse(Void* response, Boolean finalWrite, Boolean closeConn)
at ReportingServicesHttpRuntime.BaseWorkerRequest.SendHttpResponse(Boolean finalFlush)
library!ReportManager_0-1!c20!01/21/2014-16:22:41:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerHttpRuntimeInternalException: RsWorkerRequest::FlushResponse., Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerHttpRuntimeInternalException:
An internal or system error occurred in the HTTP Runtime object for application domain ReportManager_MSSQLSERVER_0-1-130347907277948893. ---> System.Runtime.InteropServices.COMException (0x80070079): The semaphore timeout period has expired. (Exception
from HRESULT: 0x80070079)
at ReportingServicesHttpRuntime.BaseWorkerRequest.SendHttpResponse(Boolean finalFlush)
at ReportingServicesHttpRuntime.RsWorkerRequest.FlushResponse(Boolean finalFlush)
--- End of inner exception stack trace ---;
The last think I have done, is to grant a new user access to the report server website (by using the site options) and to the root folder (by using the folder options on ws).
But the error must not relate to the new user. The server was not touched for several days before.
Could you plz help me? I have no idea what to do.
Googling the whole day to find a solution without success

We are having the same issue with our production reporting server and it doesn't look like a permission issue. We are running the SSRS service as a domain account with administrative privileges on the server. We are seeing the following entry in the log
file:
rshost!rshost!1254!01/30/2014-13:06:04:: e ERROR: WriteCallback(): failed to write in write callback.
rshost!rshost!1254!01/30/2014-13:06:04:: e ERROR: Failed with win32 error 0x0079, pipeline=0x0000000003484370.
rshost!rshost!1198!01/30/2014-13:06:04:: e ERROR: HttpPipelineCallback::SendResponse(): failed async writing response.
rshost!rshost!1198!01/30/2014-13:06:04:: e ERROR: Failed with win32 error 0x0079, pipeline=0x0000000003484370.
httpruntime!ReportManager_0-1!1198!01/30/2014-13:06:04:: e ERROR: Failed in BaseWorkerRequest::SendHttpResponse(bool), exception=System.Runtime.InteropServices.COMException (0x80070079): The semaphore timeout period has expired. (Exception from HRESULT: 0x80070079)
at Microsoft.ReportingServices.HostingInterfaces.IRsHttpPipeline.SendResponse(Void* response, Boolean finalWrite, Boolean closeConn)
at ReportingServicesHttpRuntime.BaseWorkerRequest.SendHttpResponse(Boolean finalFlush)
library!ReportManager_0-1!1198!01/30/2014-13:06:04:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerHttpRuntimeInternalException: RsWorkerRequest::FlushResponse., Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerHttpRuntimeInternalException:
An internal or system error occurred in the HTTP Runtime object for application domain ReportManager_0-1-130355206125382999. ---> System.Runtime.InteropServices.COMException (0x80070079): The semaphore timeout period has expired. (Exception from HRESULT:
0x80070079)
at ReportingServicesHttpRuntime.BaseWorkerRequest.SendHttpResponse(Boolean finalFlush)
at ReportingServicesHttpRuntime.RsWorkerRequest.FlushResponse(Boolean finalFlush)
SSRS version is 10.50.4270.0
Regards,
Augustine.

An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database

Hello
We just had this error today. We did not do ANY changes to our existing ReportServer database neither to our reports.
Our infrastructure - we have sharepoint 2010 and sql server 2008 r2 with reporting services installed.
I confirmed the following:
-->Disk space on database server OK:
-->ReportServer database not corrupted - I restored the database to my test server and ran DBCC CheckDB.
I am now looking at the Activity Monitor and have noticed that several SPID executed by the ReportServer database are blocked by a SPID executed by the ReportServerTempDB.
Would blocking be a possible cause to this problem?
Thank you all in advance

Take a look into this http://support.microsoft.com/kb/2146315
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Installation error occurred when the air is built from another machine.

The senerio is that .
AIR SDK: 2.0
I orginally built an AIR versioned 1.05 from a mac 10.0.6 with FlashBuilder 4.6 and now I used the same code based and same application.xml to build a newer version 1.06 from a windows 7 x64 FlashBuilder 4.5 then i got the following error
The application could not be installed because an application with that name already exists at the selected installation location. Try installing to a different location.
I have put publisherID into the descriptor xml.
Could somebody please help

I found out the cause.
What I do:
Copy the Flex sdk from mac to pc directly.
More info:
The reason why i didnt do the above step at the begining because there are so many hidden files are generated by mac and which let the flashbuilder in PC keep prompting error.As a result, I manually deleted all the hidden files (more than 2k files) and build release with that sdk and finally the installation error not show.
Also,I found that although both mac and pc are using Flex 4.1 sdk ,may be with different build number? The point is I will/may face the same problem if I decide to update the flex sdk from 4.1 to newers version.
This is a very big problem because there are so many ppl installed the old version and they may have to manually uninstall and install again and I will receive so many phone calls for support but which is fine if they are all hot girls..

REP-9: A fatal error occured: in the toolkit.

Ok, so I just installed a fresh install of Forms and Reports 11.1.2.0.0 and applied the most recent patch for it like I've been doing to the other servers in my environments. This one is the only one that gives me errors when I try to run a report. Here's what I'm looking at:
REP-9: A fatal error occured: in the toolkit.
UI-9: This function call is out of context.
REP-0002: Unable to retrieve a string from the Report Builder message file.
REP-0009:
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
at..
I'd type out the rest but I can't paste in the new forum for some reason... Anyone seen this before?

I think I may have found the problem. The path in my account profile was wrong... I'm going to re-install everything with the correct path and see if that helps.

"error occurred setting the server application active"

Hi All,
I found following error when I save outline in ASO application. It seems that the application cannot be started correctly. Other applications (BSO/ASO) are running correctly.
"error occurred setting the server application active"

try this:
Issue can be from both server and application side:
1)Addition of SERVERTHREADS with a proper value. When any database operation is requested then monitor the number of process, memory etc. Idea is to identify which process is trying to use max resource on server level.
2) Also, if possible try and increase the ulimit setting to "unlimited".
3) Verify NETDELAY and NETRETRYCOUNT -- Guess you have checked this so values should be fine here.
4) If the environment is windows then:
a)Open the Registry
b)Navigate to Local Machine\System\CurrentControlSet\Services\TCPIP\Parameters
c)Add new DWORD Value named TcpTimedWaitDelay, right click and select Modify. Select decimal radio button, type in 30. (The default value of this parameter is 2 minutes. This is how long it will take for a TCP/IP port that was used by the network for a connection to be released and made available again. 30 sec is the minimum allowed by Microsoft)
d)Add new DWORD Value named MaxUserPort, right click and select Modify. Select decimal radio button, type in 65534. (The default value is 5000. This determines the highest port number TCP can assign when an application requests an available user port from the system).
e)Add new DWORD Value named MaxFreeTcbs, right click and select Modify. Select decimal radio button, type in 6250. (The default value is 2000. This determines the number of TCP control blocks (TCBs) the system creates to support active connections. Because each connection requires a control block, this value determines how many active connections TCP can support simultaneously. If all control blocks are used and more connection requests arrive, TCP can prematurely release connections in the TIME_WAIT state in order to free a control block for a new connection).
f) Reboot the server.
5) On application side, look at the cache settings, If they are very high then try lowering them and check.
Cheers!!
HA:-)
Edited by: user9513506 on Sep 2, 2008 5:03 AM

An error occurred during the processing of a configuration file.

hi,
On installation and using oracle session provider, i am getting following error.
An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Line 51: <providers>
Line 52: <add name="MyOracleSessionStateStore"
Line 53: type="Oracle.Web.SessionState.OracleSessionStateStore,
Line 54: Oracle.Web, Version=2.112.2.0, Culture=neutral,
Line 55: PublicKeyToken=89b483f429c47342"
Can any one help me?
Thanks in advance
Siva

my server :
os windown server 2003
iis 6.0

Error occured in the phase MOVE NAMETABS while updating patch.

Hi Gurus
When i implementing a SP15 to SP16 in a queue, i got the Dump.
Please help me in this issue.
The import was stopped, since an error occurred during the phase
   IMPORT_PROPER, which the Support Package Manager is unable to resolve
   without your input.
   After you have corrected the cause of the error, continue with the
   import by choosing Support Package -> Import queue from the initial
   screen of the Support Package Manager.
   The following details help you to analyze the problem:
       -   Error in phase: IMPORT_PROPER
       -   Reason for error: TP_STEP_FAILURE
       -   Return code: 0008
       -   Error message: OCS Package ALL, tp step "6", return code 0008
   Notes on phase IMPORT_PROPER
   In this phase repository objects and table entries are imported. This
   phase can terminate due to the following reasons:
   o   TP_INTERFACE_FAILURE: The tp interface could not be called.
   o   TP_FAILURE: The program tp could not be executed. For more
       information on this, see the SLOG or ALOG log file.
   o   TP_STEP_FAILURE: A tp step could not be executed. To find the cause
       of the error, see the appropriate log, such as the import log.
       If the cancelation message contains a tp step 6, N or S, the step in
       question is independent of the transport request. You can find these
       logs under the node Import steps not specific to transport request
       in the log overview.
       Alternatively, you can find these logs in the following files in the
       log directory of your transport directory (usually:
       /usr/sap/trans/log):
    -   tp Step 6: P<YY><MM><DD>.<SID>
    -   tp Step N: N<YY><MM><DD>.<SID>
    -   tp Step S: DS<YY><MM><DD>.<SID>
    You can display these files using the report RSPUTPRT or by calling
    transaction AL11.
A prerequisite of the Support Package Manager is that the Change and
Transport System (CTS) is configured correctly. For more detailed
information, read the online documentation available from Help -> SAP
Library -> mySAP Technology Components -> SAP Web Application Server ->
Change and Transport System .
A list of the most important SAP Notes for Online Correction Support
(OCS) is available in SAP Note 97620, which is updated regularly.
Regards,
Ganesh

Hi jazz,
I want to update the patch SAPKA70016 for SAP_ABA component.
Queue log
System              : ISP
tp path             : tp
Version and release: 372.04.36 700
Activate inactive nametabs
End date and time : 20081215012202
Ended with return code: ===> 8 <===
TP request log is
START CMDIMPORT            ISP L      20081222014354              DDIC         usirs254 20081222014354043
STOP CMDIMPORT            ISP L      20081222014401              DDIC         usirs254 20081222014354043
START DD IMPORT            ISP H      20081222014540              DDIC         usirs254 20081222014540574
STOP DD IMPORT            ISP H      20081222014616              DDIC         usirs254 20081222014540574
START DD ACTIVATION        ISP A      20081222014617              DDIC         usirs254
START tp_getprots          ISP J      20081222014617              DDIC         usirs254
STOP tp_getprots          ISP J      20081222014723              DDIC         usirs254
STOP DD ACTIVATION        ISP A      20081222014723              DDIC         usirs254
START imp all              ISP        20081222014723              DDIC         usirs254 20081222014723434
INFO: event SAP_IMPORT_START triggered successfully
START DISTRIBUTION OF DD-O ISP S      20081222014723              DDIC         usirs254 20081222014723434
START tp_getprots          ISP S      20081222014723              DDIC         usirs254 20081222014723434
STOP tp_getprots          ISP S      20081222014726              DDIC         usirs254 20081222014723434
STOP DISTRIBUTION OF DD-O ISP S      20081222014726              DDIC         usirs254 20081222014723434
INFO TBATG CONVERSION OF ISP N      not needed                  DDIC         usirs254 20081222014723434
START MOVE NAMETABS        ISP 6      20081222014726              DDIC         usirs254 20081222014723434
START tp_getprots          ISP P      20081222014726              DDIC         usirs254 20081222014723434
ERROR ALL                  ISP 6 0008 20081222014743              DDIC         usirs254 20081222014723434
STOP tp_getprots          ISP P      20081222014747              DDIC         usirs254 20081222014723434
STOP MOVE NAMETABS        ISP 6      20081222014747              DDIC         usirs254 20081222014723434
ERROR: stopping on error 8 during MOVE NAMETABS
START INFORM SAP-SYSTEM OF ISP Q      20081222014747              DDIC         usirs254 20081222014723434
START tp_getprots          ISP Q      20081222014747              DDIC         usirs254 20081222014723434
STOP tp_getprots          ISP Q      20081222014748              DDIC         usirs254 20081222014723434
STOP INFORM SAP-SYSTEM OF ISP Q      20081222014748              DDIC         usirs254 20081222014723434
STOP imp all              ISP   0008 20081222014748              DDIC         usirs254 20081222014723434
START CMDIMPORT            ISP L      20081222015155              DDIC         usirs254 20081222015155637
STOP CMDIMPORT            ISP L      20081222015158              DDIC         usirs254 20081222015155637

An error occurred in the core cache

Hi All
<b>I have posted this Message almost 3 to 4 time , but no one has replied , as they have never come across the problem, if this is the case , we shud take those ases first. pls help !!!!</b>
Case : ISA B2C CRM
Deploying through SDM
I have created New Custom B2C as per Extension Template
Action
Business Object Manager
Business Object
Backend Interface
Backend Object
Created Entries in bom-config.xml & backendobject-config.xml as well
Classes are as per Extension.
My Modified Application was working Fine ==> It has passed all layers & retriving DATA from CRM & Displaying on Custom JSP.
Now what is the intresting point i am facing is the EAR which has been deployed successfully & Running before Server Restart is only Working.
, when i Create new EAR ( with Same context node) & deploy , after launching that Application this Errors Come( yes i have undeployed the Working EAR as the context node is same)
500 Internal Server Error
SAP J2EE Engine/6.40
Application error occurred during request processing.
Details: Error [com.sap.engine.services.servlets_jsp.server.exceptions.WebServletException:
Error while servlet [action] is initialized with a run-as identity.],
with root cause [java.security.PrivilegedActionException: null].
Exception id: [0002A56BEBF7005700000112000007A400041641E2ED396E]
Now it the same case with each n every EAR with different contextnode which i create through isa build tool ( but earlier it was not the case though i am following same procedure for creating ear)
What is going Wrong !!!!!!!!!!!!!.
Is there is any problem with SDM !!!!.
When i have gone to Logs isaerror.log
#1.5#0002A56BEBF7003E00000039000007A400041642BB7830DC#1150375776023#bccom.sapmarkets.isa.core.cache.CacheInitHandler#sap.com/crm.b2c_b2cApp#bccom.sapmarkets.isa.core.cache.CacheInitHandler#J2EE_ADMIN#542##ilggladev04_C4D_4756250#Guest#65318570fc6d11dac2c90002a56bebf7#SAPEngine_Application_Thread[impl:3]_19##0#0#Error#1#/#Plain###[undefined|system.cache.exception] An error occurred in the core cache "region 'XCM_SESSION_SCOPE' already exists in cache"# #1.5#0002A56BEBF7003E0000003A000007A400041642BB7A1624#1150375776132#bccom.sapmarkets.isa.core.cache.CacheInitHandler#sap.com/crm.b2c_b2cApp#bccom.sapmarkets.isa.core.cache.CacheInitHandler#J2EE_ADMIN#542##ilggladev04_C4D_4756250#Guest#65318570fc6d11dac2c90002a56bebf7#SAPEngine_Application_Thread[impl:3]_19##0#0#Error#1#/#Plain###[undefined|system.cache.exception] An error occurred in the core cache "region 'XCM_APP_SCOPE' already exists in cache"# #1.5#0002A56BEBF7003E0000003B000007A400041642BE2515F7#1150375820912#bccom.sapmarkets.isa.core.init.InitializationHanlder.performInitialization#sap.com/crm.b2c_b2cApp#bccom.sapmarkets.isa.core.init.InitializationHanlder.performInitialization#J2EE_ADMIN#542##ilggladev04_C4D_4756250#Guest#65318570fc6d11dac2c90002a56bebf7#SAPEngine_Application_Thread[impl:3]_19##0#0#Error#1#/#Plain###[undefined|system.initFailed] Initalization of com.sapmarkets.isa.core.xcm.init.ExtendedConfigInitHandler failed
java.lang.StackOverflowError #
then I have come to Point that there is somthing wrong with Cach Control Configuration .
with errors as follows
An error occurred in the core cache "region 'XCM_SESSION_SCOPE' already exists in cache"#
An error occurred in the core cache "region 'XCM_APP_SCOPE' already exists in cache"#
Initalization of com.sapmarkets.isa.core.xcm.init.ExtendedConfigInitHandler failed
I tried to clear the cache through http://localhost:50000/b2c_b2cApp/admin/index.jsp
but the page comes blank without any links
Initially this was not the Problem , now how it is Coming !!!! But as far as i know , once our Development Server was Restarted .( not just j2ee Server)
Now after that whatever new EAR i m building ( locally) is not coming Properly
Please can u throw some Light on that.
pls help me , i believe , u all can solve my problem
Please Reply Soon
Thanks & Regards
Ravi Sah

Hi
can some body look at this issue .
I will be very thankful to you all.
Thanks & regards
Ravi Sah

"An error occurred sending the command to the application" When trying to open excel document from outlook 2007

Error message "An error occurred sending the command to the application" When trying to open excel document from outlook 2007.
OS: Windows Server 2008 R2
If I save the document then it opens fine, messing with default file associations does not resolve this problem, I've googled for ir it and some suggest unticking compatibility mode or "run as admin" for excel application, neither is selected in my case.
Outlook is configured to run as remote application from remoteApp server, this error is only occurring for one user, for others excel documents open just fine.

Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, we can Create a trusted location follow these steps
Click the Microsoft Office Button , and then click Excel Options.
Click Trust Center, click Trust Center Settings, and then click
Trusted Locations.
If you want to create a trusted location that is not local to your computer, select the Allow trusted locations on my network (not recommended) check
box.
Click Add new location.
IMPORTANT We recommended that you don't make your entire
Documents or My Documents folder a trusted location. Doing so creates a larger target for a hacker to potentially exploit and increases your security risk. Create a subfolder within Documents or My Documents, and make only that folder a trusted location.
In the Path box, type the name of the folder that you want to use as a trusted location, or click Browse to
locate the folder.
If you want to include subfolders as trusted locations, select the
Subfolders of this location are also trusted check box.
In the Description box, type what you want to describe the purpose of the trusted location.
Click OK.
More detailed information you can refer to this link:
http://office.microsoft.com/en-us/word-help/create-remove-or-change-a-trusted-location-for-your-files-HA010031999.aspx?CTT=1#BM12
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHN
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

An error occurred in the persistence; contact your system administrator

HI,
when i am going to create user in user administration , it showing this error message An error occurred in the persistence; contact your system administrator. Post installtion steps i mean visual j2ee admin tool , sld i configured. every thing is fine expect this problem .
I got one answer i think we need sap jsf user. I found in the users area sap jsf user . but there is no roles assigned to sap jsf user.
How can i create role related to sap jsf user. please reply . reply will highly appreciated.

Hi, how did this get resolved?
Regards,
Vishal

An error occured in the claim providers configured from this site collection

Similar Messages

Maybe you are looking for