An error occured while preparing the installation.Can anyone experience the same thing?Help please.. :(
Can anyone help me about this problem..?i tried installing it using safemode, i also tried to verify my disk in disk utility before installing it but still error...please help me.!
Can anyone help me about this problem..?i tried installing it using safemode, i also tried to verify my disk in disk utility before installing it but still error...please help me.!
Similar Messages
-
An error occurred while preparing the installation. Try running the application again
I Have erased the hard drive of my MBP in order to perform a clean reinstall of OS X Mavericks, according to these instructions.
When I tried to reinstall, my internet connection stopped (was broadcasting via another MBP and the cable from that one got disconnected), so I restarted the erased MBP to try again. Holding command+R, it booted in internet recovery (as the recovery partition was erased along with the rest of the hard drive), but could not connect over the broadcasted WiFi, so I created a bootable USB flash drive according to these instructions on the other MBP.
This installation went smooth without any hiccups, but due to an oversight I had to do it again the next day.
I took the same steps, with the same bootable drive (I did not create a new one the first time) but this time I couldn’t get through the prepare to install phase. At the end, where the “about a second remaining” message stays for about 20 minutes, I get the “An error occurred while preparing the installation. Try running the application again” message. When I quit the installer (only option at that stage) and return to Disk Utility, the internal drive on which I tried to do the installation is not visible anymore.
I tried this (after a reboot every time) with a new bootable usb drive with the same download of the OS X Mavericks installer and with a new one, each ending with the same error. The installer was downloaded on an MBP on which Mavericks is also installed, with the same Apple ID. The App Store did not allow me to change Apple ID for the Mavericks download. Can this pose a problem? It did work the first time, though.
Note that this error occurs at a different stage than the one with the same message due to the wrong date (this discussion amongst others). I also checked the date in terminal and this appears to be correct, when I consider the timezone.
Here are a few lines from the installer log (omitted similar lines and lines that could contain personal information). The most important line is the last one, indicating the error.
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: @(#)PROGRAM:Install PROJECT:Install-846
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: @(#)PROGRAM:IA PROJECT:InstallAssistant-476.8
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Hardware: MacBookPro9,2 @ 2.50 GHz (x 4), 4096 MB RAM
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Running OS Build: Mac OS X 10.9.3 (13D65)
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: DYLD_NO_FIX_PREBINDING=1
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: __CF_USER_TEXT_ENCODING=0x0:0:0
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: PATH=/usr/bin:/bin:/usr/sbin:/sbin
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: PWD=/
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: SHLVL=1
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: __OSINSTALL_ENVIRONMENT=1
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: CI_DEFAULT_OPENCL_USAGE=0
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: OS_INSTALL=1
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: _=/System/Library/CoreServices/Language Chooser.app/Contents/MacOS/Language Chooser
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Using distribution archive from /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport/OSInstall.mpkg
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Configuring products from SharedSupport folder
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Install is double-dmg. Not adding chunklist to download list.
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Using product <OSInstallDVDProduct> based on media at /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport at distance 5
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Using product <OSInstallESDProduct> based on distribution at /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport/OSInstall.mpkg at distance 5
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Checking Software Update catalog URL https://swscan.apple.com/content/catalogs/others/index-10.9-mountainlion-lion-sn owleopard-leopard.merged-1.sucatalog
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: JS: installCheckScript threw exception TypeError: 'null' is not an object (evaluating 'my.target.systemVersion')
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: Can not connect to /var/run/systemkeychaincheck.socket: No such file or directory
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: Could not load Software Update catalog: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7fedd960ccc0 {NSUnderlyingError=0x7feddc866ef0 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://swscan.apple.com/content/catalogs/others/index-10.9-mountainlion-lion-sn owleopard-leopard.merged-1.sucatalog, NSErrorFailingURLKey=https://swscan.apple.com/content/catalogs/others/index-10.9-mountainlion-lion-sn owleopard-leopard.merged-1.sucatalog, NSLocalizedDescription=The Internet connection appears to be offline.}
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: Could not fetch SWU catalog to create SWU product
Jun 22 02:14:49 localhost Install OS X Mavericks[423]: LSExceptions [0x7fedd9446e50] unloaded
Jun 22 02:15:12 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
Jun 22 02:15:12 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
Jun 22 02:15:12 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
Jun 22 02:20:55 localhost Install OS X Mavericks[423]: Created IATool object:dbe23a50
Jun 22 02:20:56 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.BaseSystemBinaries
—a lot of similar messages, but for other packages —
Jun 22 02:20:56 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
Jun 22 02:21:09 localhost Install OS X Mavericks[423]: Preventing machine sleep.
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using product IA_PKSecureNetEnabledProduct <file:///Volumes/schijf/OS%20X%20Install%20Data/> at distance 5
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using existing boot files dir at /Volumes/Install OS X Mavericks/.IABootFiles
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using mutable product path: /Volumes/schijf/OS X Install Data
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using boot files path: /Volumes/Install OS X Mavericks/.IABootFiles
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.BaseSystemBinaries
—a lot of similar messages, but for other packages —
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.OSInstall
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.BaseSystemBinaries
—a lot of similar messages, but for other packages —
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.OSInstall
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Retrieving 0 packages (0.000 GB)
*****This is where the timer starts saying “”About a minute remaining”*****
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Verifying InstallMacOSX.pkg/InstallESD.dmg
Jun 22 02:42:36 localhost Install OS X Mavericks[423]: Finished operation queue
Jun 22 02:42:36 localhost Install OS X Mavericks[423]: Opening /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport/InstallESD.dmg
Jun 22 02:42:38 localhost Install OS X Mavericks[423]: Extracting boot files from /Volumes/OS X Install ESD/BaseSystem.dmg
Jun 22 02:42:39 localhost Install OS X Mavericks[423]: Extracting Boot Bits from Inner DMG:
Jun 22 02:42:41 localhost Install OS X Mavericks[423]: Copied kernelcache
Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Copied Boot.efi
Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Copied PlatformSupport.plist
Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Ejecting disk images
Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Generating the com.apple.Boot.plist file
Jun 22 02:42:42 localhost Install OS X Mavericks[423]: com.apple.Boot.plist: {
"Kernel Cache" = "/.IABootFiles/kernelcache";
"Kernel Flags" = "container-dmg=file:///Install%20OS%20X%20Mavericks.app/Contents/SharedSupport/ InstallESD.dmg root-dmg=file:///BaseSystem.dmg";
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Done generating the com.apple.Boot.plist file
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Blessing /Volumes/Install OS X Mavericks -- /Volumes/Install OS X Mavericks/.IABootFiles
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Blessing Mount Point:/Volumes/Install OS X Mavericks Folder:/Volumes/Install OS X Mavericks/.IABootFiles plist:com.apple.Boot.plist
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: ***************************** Setting Startup Disk *****************************
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: ****** Path: /Volumes/Install OS X Mavericks
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: ****** Boot Plist: /Volumes/Install OS X Mavericks/.IABootFiles/com.apple.Boot.plist
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: /usr/sbin/bless -setBoot -folder /Volumes/Install OS X Mavericks/.IABootFiles -bootefi /Volumes/Install OS X Mavericks/.IABootFiles/boot.efi -options config="\.IABootFiles\com.apple.Boot" -label OS X Installer
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Bless on /Volumes/Install OS X Mavericks succeeded
Jun 22 02:45:55 localhost Install OS X Mavericks[423]: Got error in writing to /Volumes/schijf/OS X Install Data/minstallconfig.xml
That last line indicates the error that occurred. (The internal drive on which I try to install Mavericks is called “schijf”, it also already has been called Macintosh HD, with no effect. This time I tried another name during the reformat to see if and when the installer renames the disk. Does it do this, or should I call the disk “Macintosh HD” myself?)
By now I also got past the internet recovery issues, being able to get the progress bar under the spinning globe and the option to install Lion (not Mavericks, but I suppose that’s because the MBP shipped with Lion). When I choose this option, the installer first spends a few hours downloading additional components. This eventually took less time than first indicated, but still about 4-5 hours. After this, the installation of about 24 minutes starts, but this takes much longer than the indicated 24 minutes, each minute taking about 15 minutes. When it was less than a minute, the internet connection got disconnected (but I don’t suppose it still needed an internet connection at this stage, having downloaded all additional components) and now the “Less than a minute” message has been there the whole night (about 9,5 hours), the last 9 hours with a spinning beachball on the screen after I accidentally clicked somewhere on the screen (nowhere in particular, he shouldn’t do something because of the click. After unplugging the power adapter, the battery icon on the screen wasn’t updated, and the WiFi icon simply disappeared, instead of showing no bars like it should when there’s no connection).
Does Anyone know how I can fix the error, because I would prefer installing with a bootable drive. Is it worth it to continue waiting on the current, apparently stuck Lion installer to finish or should I force a reboot?
Can I try using the Recovery Disk assistant (OS X Recovery Disk Assistant v1.0) to create a recovery disk with the other MBP? I think not, as this might cause trouble with 2 different MBP's using the same license.
Thanks in advance!Since this thread seems to be gaining more speed than the other one i'm working on, i figured i'd add these images to help you all out detailing the exact problem.
I'm having the same issue and I wanted to provide some info specific to my mac, and some info in general to help with diganosis.
First, my specs
Secondly, I am running an aftermarket 500 GB drive.
Third, not sure if this is realated, but this screen suggests the proress will take 3 minutes, then it abruptly umps to the restart phase after about 1.5 - 2.5 minutes.
And finally, here is the seeminly unavoidable error message.
Also, other things I've tried now are
installing it from the "show package contents area",
mounting said DMG and trying to install from there.
installing a package file called "upgradeos.pkg"
no luck. -
My MacBook Air becomes unresponsive when logging in, and I decided to reinstall OS X Lion. When running the installer from OS X Recovery, it gave the error message "An error occurred while preparing the installation. Try running this application again."
Checking in the log revealed the following error:
Can not connect to /var/run/systemkeychaincheck.socket: No such file or directory
Error!! Error Domain=NSURLErrorDomain Code=-1202 "UNTRUSTED_CERT_TITLE" UserInfo=0x1086bec80 {NSLocalizedDescription=UNTRUSTED_CERT_TITLE, NSLocalizedFailureReason=UNTRUSTED
The rest of the line is cutted off. Does anyone know what went wrong and how to fix it ?
I encountered the same exact problem when I attempted to re-installed OSX Lion on an old laptop. The date was set back in 2000, which rendered the certificate obsolete. Here's how I fixed it:
From the recovery menu, select the Terminal application. Run the 'date' command to confirm the date is wrong, then set the correct date using this command: date {month}{day}{hour}{minute}{year}
e.g. date 1219195613
Exit terminal (type exit). Retry the installation.
I encountered the same exact problem when I attempted to re-installed OSX Lion on an old laptop. The date was set back in 2000, which rendered the certificate obsolete. Here's how I fixed it:
From the recovery menu, select the Terminal application. Run the 'date' command to confirm the date is wrong, then set the correct date using this command: date {month}{day}{hour}{minute}{year}
e.g. date 1219195613
Exit terminal (type exit). Retry the installation.
An error occurred while preparing the installation try running this application again mountain lion
I have Macbook Pro. Previous OS was Mountain Lion 10.8.5. It was running smoothly. When I have tried to clean install the NEW Maverick 10.9 it didnt work. I erase the drive then restart for boot. nad my usb boot disk was connected. When the window came for reinstall the OS. I click. click to "continue" but then it says....there has a problem with boot. But six months ago I installed it in the same way without any error or any hamper. after that i tried many times to boot and install but i failed. i tried to recover it by internet recovery. it takes few hours. after completation the recovery the reinstall window again came. i click to reinstall then it says "an error occurred while preparing the installation try running this application again mountain lion"
i tried several times but it doesn't work. now i am downloading again osx 10.8.5 dmg to try again.
Why do i keep getting "an error occurred while preparing the installation of Mavericks?
Greetings all,
I've been trying to install Mavericks on my mid-2007 24 in iMac. I have plenty of hard drive space and I've downloaded Mavericks several times. Every time I try to install it, I keep getting the 'An error occurred while preparing the installation. Try running this application again.' message. I've run disk utility several times and verified the disk; repartitioned the drive and created a clean partition and tried to install on the new partition- same result. And I've even tried installing on an external drive- again no luck. I've been running Mountain Lion since it came out without a problem, so anyone have any ideas?
Thanks in advance.
Try booting into the Safe Mode and installing Yosemite there.
Safe Mode - About
Safe Mode
Getting "an error occurred while preparing the installation" when trying to install Yosemite
I have verified i meet all the requirements to upgrade my imac from snow leopard to yosemite. i have verified date is correct, and reset the NVRAM by holding Command+Option+P+R while rebooting. Keep getting same error "An error occurred while preparing the installation. Try running this application again." Any other suggestions would be greatly appreciated.
Hardware Overview:
Model Name: iMac
Model Identifier: iMac8,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.66 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: IM81.00C1.B00
SMC Version (system): 1.29f1
Try booting into the Safe Mode and installing Yosemite there.
Safe Mode - About
Safe Mode
Error: An error occurred while preparing the query in openquery on ServiceNow ODBC Link Server
Hi Team,
Greetings of the Day!!!!!
I have a created a link server on SQL Server 2008 R2 databse of Service Now ODBC driver. And written a stored procedure using openquery to get the data from link server.
Now problem is that, when i have scheduled that stored procedure in sql jobs. When this job runs automatically then we are getting below error while when i start the job mannually then it's not giving error.
An error occurred while preparing the query "..........."
Please help me to resolve this issue.
Regards,
Brijendra Pandey
Hi Fanny,
I had reviewed the job history. I am getting below message where as table is exist in the database.
Message
Executed as user: NT AUTHORITY\SYSTEM. OLE DB provider "MSDASQL" for linked server "SNOWDSN" returned message "[DataDirect][ODBC OpenAccess SDK driver][OpenAccess SDK SQL Engine]Base table:incident not found.[10129]". [SQLSTATE 01000] (Message 7412) OLE
DB provider "MSDASQL" for linked server "SNOWDSN" returned message "[DataDirect][ODBC OpenAccess SDK driver][OpenAccess SDK SQL Engine]Base table:sysapproval_approver not found.[10129]". [SQLSTATE 01000] (Message 7412) OLE DB provider "MSDASQL" for linked
server "SNOWDSN" returned message "[DataDirect][ODBC OpenAccess SDK driver][OpenAccess SDK SQL Engine]Base table:problem not found.[10129]". [SQLSTATE 01000] (Message 7412). The step succeeded.
Regards,
Brijendra Pandey
When starting the Migration Assistant on my pc, after a few seconds it says "An error occurred while preparating your information for transfer" what should i do ?
Restart both computers then try again.
Switch Basics: Migrate your Windows files to your Mac
When I try using Migration Assistant an error appears on my pc... "An error occurred while preparing your information for transfer." My mac just continues searching for the pc and yet both are on the same wifi. I'm not getting anywhere! Please help!!!
Simple...
http://www.apple.com/uk/support/mac/app-store/contact/
Windows migration assistant gives error " An error occurred while preparing your information for transfer " Please suggest how to proceed . Many Thanks .
To find out what is causing the Migration Assistant to fail, you can check the SystemMigration log located in - C:\Users\[user name]\AppData\Local\Temp\SystemMigration
HT4796 error occurred while preparing your information for transfer
Downloaded Migration assistant on to my PC and when I open it I get "error occurred while preparing your information for transfer"
I want to copy my email addresses etc. to my Macbook Pro.
To find out what is causing the Migration Assistant to fail, you can check the SystemMigration log located in - C:\Users\[user name]\AppData\Local\Temp\SystemMigration
A fatal error occurred while creating an SSL client credential. The internal error state is 10011.
Need help. I have my pilot lync 2013 pool up (in coexistence with 2010 production environment) and can log into Lync 2013 environment with a lync 2010 client but am not able to with a lync 2013 client. It just prompts for password but will not
take it. I'm sseeing this on my front end server multiple times:
A fatal error occurred while creating an SSL client credential. The internal error state is 10011.
Came across this http://www.logicspot.net/index.php?id=50 and tried disabling TLS 1.2, which I did and verified but yet the issue still exists.
All my certs are good coming from internal CA. My signin logs show below but keep in mind, this works just fine if using a 2010 lync client to my lync 2013 servers. Issue only occurs when trying to connect using a lync 2013 client.
1 Login: FAIL (hr = 0x1)
this request needs authentication, trying webticket from: https://domain.com/WebTicket/WebTicketService.svc
1.1 Get-NewWebTicket: FAIL (hr = 0x1)
CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
1.1.1 ExecuteWithMetadataInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.2 ExecuteWithWindowsOrNoAuthInternal: PASS
1.1.3 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.4 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Discovery task(0A4FF830) sent to URL http://domain.com completed with hr=0x80f10045
1.1.5 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.6 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
Rich
Hi,
Please check the server role and Web Services for Internet Information Services (IIS) are set correctly.
For the detailed IIS configuration, please check:
http://technet.microsoft.com/en-us/library/gg412871.aspx
As Lync client 2013 attempt to query in order to perform autodiscover of the Lync registration server. First
lyncdiscoverinternal.<sipdomain> Host (A) record and then
lyncdiscover.<sipdomain> Host (A) record. If neither of these records are resolvable then the legacy DNS SRV and A record fall-back process is used. So make sure you have add the two A record in DNS server.
More details:
http://blog.schertz.name/2012/12/lync-2013-client-autodiscover/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support
I'm uploading a photobook I made to be published. I need assistance in getting it to apple. The book is assembled and gets to the end of uploading when I get an error message, an error occurred while uploading. I have been trying all night. Help!
Welcome to the Apple Community.
I have seen previous versions mentioned in a pop up message before on iCloud.com, but I'm not really sure at all how it would help, as I couldn't get it to do anything.
The best advice I have at this time is to back up your work on your iOS device by regularly saving it to iTunes, if anything goes wrong you can then either load it into the numbers app again on the device or recover it via iTunes on your computer.
My syncs are immediate, I never get chance to see if it works in the background, sorry.
Error occurred while preparing messages for Publication or while Publishing
Hello
I'm using the rdbms event generator created with WebLogic Integration Administration Console.
When the event generator runs on both my managed servers in the cluster I get the error message below. If it only runs on one of my managed servers, it works OK.
Please advice what I'm supposed to do.
I'm using WebLogic Platform 8.1.6.
####<15.nov.2007 kl 15.27 CET> <Warning> <EJB> <sgm633> <IntServer2> <ExecuteThread: '3' for queue: 'weblogic.kernel.Default'> <<anonymous>> <> <BEA-010065> <MessageDrivenBean threw an Exception in onMessage(). The exception was:
javax.ejb.EJBException: Error occurred while preparing messages for Publication or while Publishing messages; nested exception is: java.sql.SQLException: Result set already closed.
javax.ejb.EJBException: Error occurred while preparing messages for Publication or while Publishing messages; nested exception is: java.sql.SQLException: Result set already closed
java.sql.SQLException: Result set already closed
at weblogic.jdbc.wrapper.ResultSet.checkResultSet(ResultSet.java:105)
at weblogic.jdbc.wrapper.ResultSet.preInvocationHandler(ResultSet.java:67)
at weblogic.jdbc.wrapper.ResultSet_oracle_jdbc_driver_OracleResultSetImpl.getObject(Unknown Source)
at com.bea.wli.mbconnector.rdbms.trigger.WorkerMDB.handleResultSet(WorkerMDB.java:493)
at com.bea.wli.mbconnector.rdbms.trigger.WorkerMDB.fetchUsingResultSet(WorkerMDB.java:403)
at com.bea.wli.mbconnector.rdbms.trigger.WorkerMDB.onMessage(WorkerMDB.java:232)
at weblogic.ejb20.internal.MDListener.execute(MDListener.java:400)
at weblogic.ejb20.internal.MDListener.transactionalOnMessage(MDListener.java:333)
at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:298)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2698)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:2610)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
i also have same error during load testing, mainly this error
"Unexpected exception while enlisting XAConnection java.sql.SQLException"
i tried rerunning after increasing connection pool sizes, transaction timeout, but no luck, marginal improvement in performance though
also tried changing the default tracking levl to none, but no luck.
i am with 8.1SP5, how about you ?
do share if you are able to bypass these errors
cheers
HT4796 An error occured while preparing information to transfer
Im receiving the following message when trying to transfer data from PC to MAC
An error occurred while preparing your information to transfer
What type of data files are you trying to transfer from the PC and what are their file extensions? It's possible they are not compatible with OS X.
Hope this helps
Maybe you are looking for
-
Data not seen in RSA3 after setup table was filled
HI We have an issue where we do not see data for Sales Orders and Deliveries in RSA3 (and hence is missing in BW). For sales orders we are missing 6 months' data and for Deliveries we are missing data from june to october 2007. We checked the sales
-
My applications will not open... any help would be greatly appreciated!
Hi! I just turned on my MacBook and none of my applications will load. I can click on them but nothing happens--they don't even bounce or anything. Additionally I can't move any of the icons on my desktop around (I'm not sure if this is related or no
-
I have a mac book pro and i just downloaded yosemite. after i downloaded yosemite i went to the new photos program as he iPhoto icon was no longer there and i followed the instructions. i then opened my pics and they all seemed to be there but when i
-
Playbook reset - 3 buttons don't work
So we are trying to wipe the playbook and pass on to another user for testing....however, the playbook automatically logs on to the wireless network but can't complete the registration because of the blackberry agreement and an issue with the proxy.
-
Home sharing between a Sony Vaio and Mac
I know ITunes purchases can be shared with upto 5 computers ( gadgets) in a household. Is it possible to transfer something purchased by my husband on ITunes from his Sony Vaio onto my Mac Book Pro without problems? If so how can i transfer his ITune