An error occured with Labview 5.1.1 and Netscape 7.1
After upgrading Netscape from version 7.02 to 7.1 i receive miscellaneous errors after some time while executing an program which sends and receives data via tcp/ip. If an error has occured, it is necessary to restart Labview and Netscape. Then it works some hours before crashing again. With Netscape 7.02 everything worked fine.
Any solutions?
Normaly, Netscape (only the Messenger) is running all the time. And some time the Labview-program which uses tcp/ip is running at the same time. This does not make any trouble. But if I am using the Netscape Browser too at the same time, then miscellaneous errors occur and I must restart the whole Netscape suite. If I don't do this, the Labview program always reports an error.
Little time before Labview reports an error, the Browser view in Netscape is corrupted (some times arabien characters).
I am using Windows 98SE. With Netscape 7.02 everything worked fine, the error occured after upgrading to version 7.1.
I haven't looked at the resources yet, but I will do.
EPH
Similar Messages
-
Internal Error Occured with time split...please help
Hi All,
During delta data load to the cube I am getting error 'Internal Error Occured with time split' in processing and data is coming till PSA and got error in PSA.There is no field found that is time dependent and I am unable to fix it in PSA by editing data too.
Please help me out.
Thanks in advance.May be the infoobject you used to derive the date/time field is not the correct one. I will double check that mapping. Also, it may be worth looking at the following thread.
Internal error occured with time split
Regards. -
I get error message: "An error occurred with the publication of album...Authentication with server failed. Please check your login and password information" whenever I open a facebook file in my iPhoto. In each file, most of my photos have disappeared. I am hoping I can retrieve these "lost" files. What do I need to do?
Message was edited by: leroydouglas
better yet, try this solution:
https://discussions.apple.com/message/12351186#12351186 -
Hi all,
I am having a list of files in a folder named datafiles and I am processing them one by one when I finish each one I want to move the file into a folder archive.
I am having a variable named filename and archivefilename and two fileconnections one is originalfiles and archivefiles
archivefilename=replace( @[User::filename],"datafiles","archive")
orginalfiles connection is an expression =@user:filename
archivefies connection is an expression=@user:archivefilename
the filename comes from reading the folder that contains those files
public void Main()
string[] filenames;
filenames = Directory.GetFiles(@"C:\luminis\datafiles\");
Array.Sort(filenames);
Dts.Variables["filelist"].Value = filenames;
Dts.TaskResult = (int)ScriptResults.Success;
The folder c:\luminis\archive\ exists
why I am getting this error
My filesystem task : destinationpathvariable =false
destinationconnection:archivefile
overwrite=true
operation=movefile
issourcepathvariable=false
sourceconnection=original file
why am i getting this error[File System Task] Error: An error occurred with the following error message: "Could not find a part of the path.".
sohairzakithere may be 2 problem...
1> specify a target directory only, not with the file name.
OR
2> Try using the unc,path format \\computername\sharename\
let us know your observation...
Let us TRY this | Mail me
My Blog :: http://quest4gen.blogspot.com/ -
I can't get rid of the message, n error occurred with the publication of album. It just keep coming back, and can't move around in IPhoto.
Okay, folks, after a 3 1/2 hour phone call with a (very patient) telephone support person at Blackberry, here's what I learned.
You can check your USB drivers this way:
Plug in your phone into your USB drive. Assuming your Blackberry is "seen" by your computer...
Go into the Device Manager on your computer (control panel)
Expand the Universal Serial Bus controllers item on the bottom of the list
Right-click on BlackBerry Smartphone and choose Properties
Click on the Driver tab
Click on the Driver Details button
You should see one driver. I saw two. The one the BlackBerry likes is the RimUsb one.
So here's what NOT to do: We tossed the entire driver that was the "extra". This effectively made using my mouse and keyboard impossible, as they are USB, and sent my poor husband into the basement to find a million-year-old keyboard (and then a mouse) with the old fashioned kind of connectors (PS2). Bleh. Don't do that.
Here's what I did that worked (not saything this will work for you -- this modifies the Registry so better do a system backup with that backup and restore if you're nervous about this sort of thing):
From the start menu, choose run, and type regedit to get into the Registry editor.
Follow this file path: Computer, HKEY_LOCAL_MACHINE, SYSTEM, CurrentControlSet, Control, Class
Click on: {36FCE60-C465-11CF-8056-4445535400000}
If there's an item on the right called "UpperFilters", delete it. (see pictures)
Hope this helps someone.
Karin
First pic: shows "before"
Second pic: shows full file path and "after" -
"An error occured with the AppleShare system"
Hi,
I'm running a shell script that fetchs files on an ftp server each 5 minutes. When an item is available it's copied on an AFP Server (AppleShare IP v6 or Windows 2000 depending of the name of the file). The shell script also check for the shares to be mounted and if not mount them. I also use an AppleScript (on idle) to dispatch the files in folders on the shares.
All runs perfectly but sometime - may be once or twice a day or once per week - the message An error occures with the AppleShare system (this is my translation of the french message Une erreur est survenue avec le système AppleShare) is displayed on the Finder preventing the AppleScript to do its work.
Any idea of how to resolve the problem or to trap it in the AppleScript ?
Regards,
Didier from France.
PowerMac G4 Mac OS X (10.3.9)solved upgrading to Ma
-
A communication error occured, with the TREX TcpIp Server (Errorcode 2982)
Hi All,
We are in the process of Migrating our EP 5.0 --> EP 6.0. While upgrading TREX, I am getting following error:
"Error occurred during search: com.sapportals.wcm.WcmException: <b><u>A communication error occured, with the TREX TcpIp Server (Errorcode 2982)</u></b>
A communication error occured, with the TREX TcpIp Server (Errorcode 2982)"
Has any one came across this type of error ?
<b>Software version details:</b>
EP 5.0 SP6 Patch 1 Hotfix 8
CM SP 6 Patch 1 Hotfix 21
Trex (Earlier 6.0.0.0)---> TREX 6.0 SP 1 Patch 6 (6.0.1.6.0)
Regards
Sunil KulkarniHello James,
Thanks for writing.
I am on Windows.
Now the problem is solved. I had also created a message with service market place for the above mentioned problem.
<b>Solution:</b> While upgrading the TREX, it has overwritten the "TREXIndexServer.ini", we restored it from the backup & the error was resolved.
Thanks & Regards
Sunil Kulkarni -
I am using elements 11 with Windows7. I cannot open editor because configuration error occurs with message "errror 213:11". What happened? What can I do? Thanks a lot for your support.
See if this helps:
Error "License store does not allow writing" | Install log | CS5, CS5.5 -
Whenever i tried to open the photos in iphoto it return with the message "the error occured with the publication of the album". can anybody please help me? Thanks
Can you give us a step by step to the point where you get this message?
-
RRI Problem in EP - An error occurred with the report to report interface
I have a problem with a template: In standalone the RRI call works, in EP the same template fails with "An error occurred with the report to report interface during the jump" and details "Notification Number BRAIN 192"
The JS-code is: SAPBWOpenURL(targetLink);
In both cases (standalone, and in EP ) the targetLink is
/sap/bw/BEx?SAP-LANGUAGE=EN&PAGENO=1&CMD=RRI&RRI=X&RRI_RECEIVER=QURY0001&REQUEST_NO=2
However, standalone it works, in Portal it fails with the above message.
Any idea?Hi Frank,
What was the solution?
Regards, -
Error occurred with the POP3 mail server
When I first launch my email icon the following error pops up: An error occurred with the POP3 mail server. Mail server mail.midland-webhosting.com responded
What can I do so that I can access my email? Thanks!Ok I will write lots and lots.
The mail server responded what is that question. You posted what looks like half the error message. So like you I do not understand. Those message have a second half that explains what the problem is. -
I want to make an update to my iphone 4s to ios 5.1 and i cant. it says that error occured with ios 5.1.1 what can i do ?
i change the DNS but nothing happensYes it is.
Initially I got an error message saying can't connect because of Date & Time settings.
Went in and re-verified that those were correct.
Tried to update downloads and then got a new error message: "Can't connect to iTunes Store".
I live in the US and that's where I created my iTunes a/d and Apple ID.
I am currently in India --- can that coause confusion re date & time? -
Hi, Hope this is in the right place.
I'm trying to upload photos into facebook from my iMac. I've clicked on the upload to facebook icon in iphoto but just get an error message saying 'error occurred with iPhoto - try again later. I've also had problems lately when I click on a photo to open it I just get a grey screen with an exclamation mark. I've downloaded the latest software but nothing seems to work.
Can anyone help please?
Thanks hopefully,
KarenKaren,
I'd recommend reposting in the iPhoto forum, you can find it at:
https://discussions.apple.com/community/ilife/iphoto -
Internal error occured with time split
Dear Friends
Currently i am using 0PCA_C01 which consits of fiscal year and fiscal year/variant , i want the data based on the 0calmonth and 0calyear. So i added the 0cal month and 0calyear and i have assigned the 0calmonth to 0fisyear variant and 0cal year to fiscal year in the update rules using time distribution . but i am getting error Internal error occured with time split . we are using Bi. 7.0 . i tried to search the Fourm but nobody provided any informationn on this properly , So can any body shed some light on this . if any body can provide some information on for which char which char needs to be assigned . then this will be very usefull for all of us . look forward to your replies .
ALL your answers will be appreciated .
ThankyouHi neelima
thanks for the quick reply . but if i assign 0calmonth2 to 0fiscal year then for 0calyear what do i need to assign . i need both 0calyear and 0calmonth2 . i cannot use 0calmonth . because i need to combine this cube with another 3 cubes . so please let me know the solution.
Thankyou
Edited by: Raghavendra Kumar on Aug 26, 2008 7:52 AM -
Internal Error occured with timesplit
Hi ,
An error occured when loading data to the cube . Erorr Message is "Internal Error occured with timesplit.. <b>BI version is BI 7.0</b>Message id RSAU 101
I have Created a Zcube Copy of 0figl_c10 adding 0calmonth to the Zcube..
In updaterule i have maintained Time Distribution for 0Calmonth to 0fiscper
and i have checked the oss note from previous posts , but i dont think its usefull for me , beacuse my bw system is 7.
Regards
Chaitanyaactually i want Day wise report.. since there is no option of 0calday in 0figl_c10..
i went for 0cal month.. but still its giving the same error.. can any body tell me the procedure to include 0cal day for 0figl_c10 and in update rules hw to map 0cal day.
r any routine is there like converting fiscalyear/period to 0calday...
regards
chaitanya
Maybe you are looking for
-
Exception in OSM 7.0 when XSLT Automator received message from JMS
Hi I have been prototyping on OSM 7.0 on Linux. I have a simple project, with two "Automated tasks" and some manual tasks. The first Automated task is using a XSLT Sender, and sends a message to a JSM queue "A". The second Automated task is using a X
-
Hi I want to know do some reporting on how many inbound emails received,name of attachment and recipient who emailed it. I can get some detail from SOOD(attachment details etc..) however i was wondering where i can tie this up with corresponding emai
-
Songs stop after a minute of play
I just downloaded an album on iTunes and some of the songs stop after a minute and move on to the next song. I'm having a real tough time finding an answer to this one. Does anyone know of a fix for this? Maybe a re-download? Cheers!
-
1) When many tabs are opened in multiple rows (say 50 or 100) it may take an enternity for them to close after I click the appropriate command 2)MOre often than not, it takes the browser too long to appear (open) after I initiat it by clicking the de
-
Pavilion dm4 1150ea Blutooth not working
Hi I have Pavilion Laptop dm4 1150ea. Blutooth on this is not working and frankly since buying the laptop I did not try connecting devices through bluetooth. Recently I tried this but not succeeded. When I add a device in blutooth window, it shows a