"An error occured with the boot selection verify media is present and retry" from OS Boot Manager

So I'm trying get my HP ProBook 6550p to boot Linux in UEFI mode.
Some sources say that OS Boot Manager points to \EFI\Microsoft\BOOT\bootmgfw.efi in your ESP, I've placed my EFI Shell there as a PoC test, which of course fails and errors out with the above message.
What am I doing wrong here?

That path would be for the Windows UEFI boot manager, which reads the \EFI\Microsoft\Boot\BCD database to get the boot configuration. In order to boot that path, the UEFI firmware has to be configured with that as the default.
If the computer firmware is not configured to boot efi, it will be trying to load the MBR and boot record.
A ufi shell would be in a path such as \EFI\Boot\ShellX64.efi. To get that to work there has to be a shell entry available at boot time. I have only gotten that to work once--and that was NOT on my g7-1117cl laptop.
I have been looking into this for my Pavillion g7-1117cl laptop, so far with no luck. I can boot into the diagnostics on the HP_TOOLS partition under the path \Hewlett-Packard\SystemDiags. This program has the name of SystemDiags.efi or SystemDiags32.efi. Since it can load that efi file it should be able to load bootmgrfw.efi. But it still needs to be configured in the firmware to boot to that file.

Similar Messages

Error occurred in the data selection,If i do Repeat, then it is working fin

Hi Freinds,
Here is the error message,
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Details Tab:
Extraction (messages): Errors occurred
Error occurred in the data selection ....
If i do Repeat Delta, then it is working fine.
As it is a daily load, manually repeating the load from the past 10 days.
Have tried using program RS_TRANSTRU_ACTIVATE_ALL.
Any inputs pls.....

Hi Friends,
Thanks for your valuable inputs, Problem is solved.
The Reason is that, there is a time difference in the r/3 system and bi system.
The tolerable time differene shud be only 60 seconds.
Basis guys took down time at the OS level and hav made the timers sync.....
The problem is on the source system GNP time differences
persists, which can cause the problem with delta upload .
Universal Time Coordinated UTC....: 1291187626
Date and time of database.........: 01.12.2010 12:46:59
Date and Time of R/3-Kernel.......: 01.12.2010 12:43:46
Date and Time of ABAP-Processor...: 01.12.2010 12:46:58
ABAP Time zone Setup ..............: 19800
Date and Time / local time ........: 01.12.2010 12:43:46
This leads to an exception of the delta processing, because this
tolerates a deviation of 60 seconds only (When the repeat is processed,
the "local time" in the ABAP is higher than the qrfc counter at the time when the delta was processed -> So a repeat works fine).
Please synchronize the timers like described in attached note 101726 and 741734 to eliminate the time difference .
With Regards
Badri Thiriveedhi.

Error occured in the data selection while extract data from Source system

Hello Friends
i am facing Problem while extracting data to Biw System from SAP R/3 system
The error mesage is 'Error occured in the data selection '
i.e. Monitoring - Details tab - Extraction - With error

Hi
The delta wil take the Last init selection for loading data in to the BW...
Did u check the IP at the Update tab is it the correct delta only.. or its a full..
better to go to the RSA3 and check the extractor in the Delta mode .. if u give ur delta mode it automatically takes the selction options.. so please try in RSA3..
regards
CK
PS: CHECK THE INIT SELECTIONS TOO or do an init with outdatatransfer and perform the delta...
Message was edited by:
BW Star

Process chains-Error occurred in the data selection-DBIF_RSQL_TABLE_UNKNOWN

Hi All,
The problem occurred in PC which was running smooth until now
Now I am getting message:
in BI : Error occurred in the data selection
When I went in R/3 it shows DBIF_RSQL_TABLE_UNKNOWN
Probably the only way to eliminate the error is to correct the program.
Please check the entries in the system log (Transaction SM21).
Internal call code.........: "[RSQL/READ/PA0009 ]"
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
DBIF_RSQL_TABLE_UNKN
SAPLXRSA" or "ZXRSAU
EXIT_SAPLRSAP_002"
Can anyone explain..

Hi ,
Check note 950317.
also check the blow forum having same kind of discussion :
Runtime Errors DBIF_RSQL_TABLE_UNKNOWN
Short dump error DBIF_RSQL_TABLE_UNKNOWN
DBIF_RSQL_TABLE_UNKNOWN
thanks,
Deepak

"Error occurred in the data selection" on init delta load ODS- InfoCube

Hi, gurus and experts!
I'm trying to do Init delta load from 0FIAR_O03 ODS into 0FIAR_C03 InfoCube in PRD env. by InfoPackage "Initialize with delta transfer (with data transfer)". Immediately after the load was started I got error
"Error occurred in the data selection"
with details
"Job terminated in source system --> Request set to red".
Where are no any short dumps. There are 1 activated init load in ODS - nearly 6 500 000 records.
Any ideas about error? And the way I can load data?

Hi Gediminas Berzanskis,
I faced the similar error when I tried to load data from an ODS which contained huge amount of data to a Cube. Even in your case the volume of data is more (around 6.5 million records). The error could be due to the table space issue, please contact your Basis team to check if enough table space exist for both the data targets.
Meanwhile you may also check the RFC connection of the Myself source system.
You can replicate the DSO datasource once and then reactivate the transfer rules using the program RS_TRANSTRU_ACTIVATE_ALL.
Try load with a small amount of data with a Full load option and then with a delta option..
Hope this Helps,
Prajeevan (XLNC)

I get error message: "An error occurred with the publication of album...Authentication with server failed...whenever I open a facebook file in my iPhoto. In each file, most of my photos have disappeared. What do I need to do?

I get error message: "An error occurred with the publication of album...Authentication with server failed. Please check your login and password information" whenever I open a facebook file in my iPhoto. In each file, most of my photos have disappeared. I am hoping I can retrieve these "lost" files. What do I need to do?

Message was edited by: leroydouglas
better yet, try this solution:
https://discussions.apple.com/message/12351186#12351186

Moving files to another directory got an error message [File System Task] Error: An error occurred with the following error message: "Could not find a part of the path.".

Hi all,
I am having a list of files in a folder named datafiles and I am processing them one by one when I finish each one I want to move the file into a folder archive.
I am having a variable named filename and archivefilename and two fileconnections one is originalfiles and archivefiles
archivefilename=replace( @[User::filename],"datafiles","archive")
orginalfiles connection is an expression =@user:filename
archivefies connection is an expression=@user:archivefilename
the filename comes from reading the folder that contains those files
public void Main()
            string[] filenames;
            filenames = Directory.GetFiles(@"C:\luminis\datafiles\");
            Array.Sort(filenames);
            Dts.Variables["filelist"].Value = filenames;
            Dts.TaskResult = (int)ScriptResults.Success;
The folder c:\luminis\archive\ exists
why I am getting this error
My filesystem task : destinationpathvariable =false
destinationconnection:archivefile
overwrite=true
operation=movefile
issourcepathvariable=false
sourceconnection=original file
why am i getting this error[File System Task] Error: An error occurred with the following error message: "Could not find a part of the path.".
sohairzaki

there may be 2 problem...
1> specify a target directory only, not with the file name.
OR
2> Try using the unc,path format \\computername\sharename\
let us know your observation...
Let us TRY this | Mail me
My Blog :: http://quest4gen.blogspot.com/

I can't get rid of the message, n error occurred with the publication of album. It just keep coming back, and can't move around in IPhoto.

I can't get rid of the message, n error occurred with the publication of album. It just keep coming back, and can't move around in IPhoto.

Okay, folks, after a 3 1/2 hour phone call with a (very patient) telephone support person at Blackberry, here's what I learned.
You can check your USB drivers this way:
Plug in your phone into your USB drive. Assuming your Blackberry is "seen" by your computer...
Go into the Device Manager on your computer (control panel)
Expand the Universal Serial Bus controllers item on the bottom of the list
Right-click on BlackBerry Smartphone and choose Properties
Click on the Driver tab
Click on the Driver Details button
You should see one driver. I saw two. The one the BlackBerry likes is the RimUsb one.
So here's what NOT to do: We tossed the entire driver that was the "extra". This effectively made using my mouse and keyboard impossible, as they are USB, and sent my poor husband into the basement to find a million-year-old keyboard (and then a mouse) with the old fashioned kind of connectors (PS2). Bleh. Don't do that.
Here's what I did that worked (not saything this will work for you -- this modifies the Registry so better do a system backup with that backup and restore if you're nervous about this sort of thing):
From the start menu, choose run, and type regedit to get into the Registry editor.
Follow this file path: Computer, HKEY_LOCAL_MACHINE, SYSTEM, CurrentControlSet, Control, Class
Click on: {36FCE60-C465-11CF-8056-4445535400000}
If there's an item on the right called "UpperFilters", delete it. (see pictures)
Hope this helps someone.
Karin
First pic: shows "before"
Second pic: shows full file path and "after"

"An error occured with the AppleShare system"

Hi,
I'm running a shell script that fetchs files on an ftp server each 5 minutes. When an item is available it's copied on an AFP Server (AppleShare IP v6 or Windows 2000 depending of the name of the file). The shell script also check for the shares to be mounted and if not mount them. I also use an AppleScript (on idle) to dispatch the files in folders on the shares.
All runs perfectly but sometime - may be once or twice a day or once per week - the message An error occures with the AppleShare system (this is my translation of the french message Une erreur est survenue avec le système AppleShare) is displayed on the Finder preventing the AppleScript to do its work.
Any idea of how to resolve the problem or to trap it in the AppleScript ?
Regards,
Didier from France.
PowerMac G4 Mac OS X (10.3.9)

solved upgrading to Ma

A communication error occured, with the TREX TcpIp Server (Errorcode 2982)

Hi All,
 We are in the process of Migrating our EP 5.0 --> EP 6.0. While upgrading TREX, I am getting following error:
"Error occurred during search: com.sapportals.wcm.WcmException: A communication error occured, with the TREX TcpIp Server (Errorcode 2982)
A communication error occured, with the TREX TcpIp Server (Errorcode 2982)"
 Has any one came across this type of error ?
Software version details:
EP 5.0 SP6 Patch 1 Hotfix 8
CM SP 6 Patch 1 Hotfix 21
Trex (Earlier 6.0.0.0)---> TREX 6.0 SP 1 Patch 6 (6.0.1.6.0)
Regards
Sunil Kulkarni

Hello James,
 Thanks for writing.
I am on Windows.
 Now the problem is solved. I had also created a message with service market place for the above mentioned problem.
Solution: While upgrading the TREX, it has overwritten the "TREXIndexServer.ini", we restored it from the backup & the error was resolved.
Thanks & Regards
Sunil Kulkarni

An error occured with the publication of the album, an error occured with the publication of the album

Whenever i tried to open the photos in iphoto it return with the message "the error occured with the publication of the album". can anybody please help me? Thanks

Can you give us a step by step to the point where you get this message?

RRI Problem in EP - An error occurred with the report to report interface

I have a problem with a template: In standalone the RRI call works, in EP the same template fails with "An error occurred with the report to report interface during the jump" and details "Notification Number BRAIN 192"
The JS-code is: SAPBWOpenURL(targetLink);
In both cases (standalone, and in EP ) the targetLink is
/sap/bw/BEx?SAP-LANGUAGE=EN&PAGENO=1&CMD=RRI&RRI=X&RRI_RECEIVER=QURY0001&REQUEST_NO=2
However, standalone it works, in Portal it fails with the above message.
Any idea?

Hi Frank,
What was the solution?
Regards,

Error message :"Error occurred in the data selection"

Hi All ,
When I am exracting a Delta from source I am getting this error mesage Error occurred in the data selection" can any one let me know how to slove this,
Thanks in Advance.
rao

Praveen,
In SM 37
In JobName i have given - *REQU_4683BBF4HXG4XW4ASQOSP6PJG
where REQU_4683BBF4HXG4XW4ASQOSP6PJG is Request no
User Name is -- *
then I had check all these
sched, Released, ready, active, Finished, cancelled
then executed
then i received the message no jobs are matches the selection criteria
thanks
prasanna

Error occurred with the POP3 mail server

When I first launch my email icon the following error pops up: An error occurred with the POP3 mail server. Mail server mail.midland-webhosting.com responded
What can I do so that I can access my email? Thanks!

Ok I will write lots and lots.
The mail server responded what is that question. You posted what looks like half the error message. So like you I do not understand. Those message have a second half that explains what the problem is.

Keep getting the message "An error occurred with the publication of album - Do you want to remove the album from your library?" don't know why

I don't know why I keep getting the following messge for a recent album I created in iphoto:
"An error occurred with the publication of album (name of album). Do you want to remove the album from your library?" In smaller letters under that message, is "The feed could not be found or is invalid." There are 2 buttons to click - either "Remove Album" or "Keep Album". Never had this issue before, did not do anything different this time.
Mac OS X v. 10.6.8
iphoto 09 v. 8.1.2 (424)

Is this an album you're publishing as a MMe Gallery? If so delete the album and gallery, create a new album and gallery and try publishing again.
OT

"An error occured with the boot selection verify media is present and retry" from OS Boot Manager

Similar Messages

Maybe you are looking for