An error occurred during the installation of assembly policy 8.0 Microsoft VC80. CRT, type="win32-policy". Version ="8.0.50727.6195" .public Key Token=1fc8b3b9a1e18e3b", processor Architecture= "x86"
A error message occured installing the latest Itunes of assembly policy 8.0 Microsoft vc80 crt type win32
OK. You may have to reinstall everything from scratch but follow following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch
Similar Messages
-
When trying to download itunes I get this error message. An errr occurred during installation of assemby " Microsoft VC80CRT type=wind32" vversion "8.9.50727.4054, public key token=1fc8b9a1e3b"processor Architecture="AMD64" Please advise
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.) -
Hi!
I am trying to install iTunes on my laptop that runs Windows 8.1
I have tried several solutions discussed in similar questions but none worked
-uninstalled and reinstalled
-cleaned C drive for all Apple products
-tried to install security update’ Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update’ but the same error appeared
-Windows module installer is enabled
I always get this error
an error occured during the installation fo assembly "Microsoft.VC80.CRT.type="win32", version="8.0.50727.6195, public key token=,1fc8b3b9a1e18e3b", processor architecture="x86", please refer to help and support for more information. HRESULT: 0x80070422
If i ignore and proceed another error appears
Service 'Apple Mobile device' failed to start. Verify that you have sufficient privileges to start system services
If i ignore one more time, itunes is installed but when i try to run it
Apple application support was not found. Apple Application Support is required to run iTunes Helper- please uninstall iTunes and then install itunes again-error 2
Can someone help me please? Thank you!Hi M2i7guel,
Welcome to Apple Support Communities.
It sounds like there is an issue installing iTunes and other Windows updates on your PC. The article linked below provides troubleshooting suggestions that will resolve most issues like the one that you've described.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
I hope this helps.
-Jason -
i had to reinstall my itunes, and it wont reinstall, instead saying there was "an error occurred during the installation of assembly microsoft.vc80.crt.type = win32 version 8.0.50727 6195 public key token 1fc8b3b9a1e18e3b processorarchitecture = x86.
I have taken all apple products off my computer per other suggestions, I have run malwarebytes with no viruses found, and have even tried installing itunes as a different user on my computer but get the same message everytime.See Troubleshooting issues with iTunes for Windows updates.
tt2 -
When I try to download the newest version of iTunes, I get the message : "An error occured during the installation of assembly "policy 8.0 Microsoft VC80.CRT type= "win32-policy".version="8.0.50727.6195.public Key Token="1fc8b3b9a1e18e3b.processorArchitecture = "x86" Please refer to help and support.
Ok I cant find a way to fix this so I basically cant use my Verizon Iphone 4 because it wont connect on an old version...OK. You may have to reinstall everything from scratch but follow following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
I have Windows Vista, when I tried to install iTunes, the following error pops up:
"An error ocurred during the installation of assembly policy 8.0 microsoft VC80.CRT. Win32 policy version"
What can I do to complete the installation?
Thanks in advance!"An error ocurred during the installation of assembly policy 8.0 microsoft VC80.CRT. Win32 policy version"
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.) -
can any one help, I'm trying to download iclouds on to my pc but when I download the icloud control panel 2.1.2 I keep getting error message: policy8.0.microsotf.vc80.crt,type="win32-policy,"version="8.0.50727.6195",publi ckey Token="1fc863b9a1e18e36",processor Architchure="amd64". Can't seem to find a solution?
To enable iCloud on your Windows PC,
first set up iCloud on your other devices,
then install the iCloud Control Panel for Windows...
From Here...
http://www.apple.com/icloud/setup/pc.html -
Please refer to Help and support for more information.
HRESULT:0x80070003 assembly interface : IAassemplyCache, function : CreateAssemplyCacheltem, component:
{63E949F6-03BC-5C40-A01F-C8B3B9A1E18E}OK. You may have to reinstall everything from scratch but follow following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
Can someone help me?
OK. You may have to reinstall everything from scratch but follow following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
I had itunes working fine on my computer until it stopped playing music files one day. I uninstalled the program and quicktime and tried reinstalling afterwards. I was able to install quicktime but itunes wouldn't istall now. My computer in Windows 7 pc and I have been using itunes for about 2 years now..
Hi tKalra - I got the same error and finally managed to install itunes successfully. Below is what happened with me.
I have Windows7 64 bit. I downloaded itunes 10.6.3 for windows64bit and started the installation wizard by opening the downloaded file. At one stage I got the same error you have mentioned above. I started googling to find a solution and thats how I found your post. Anyway I went through lot of other posts that suggested lot of different things but I just wanted to try my own thing first.
So what I did is to go through with the wizard by clicking ok on the error. I then got an error about apple mobile device service not running. I ignored and went ahead with the installation. Installation finished but the itunes wont start giving the service not running error. I tried to manually start the service but it gave a privilege error.
I then went to control panel and uninstalled itunes, apple mobile device thing and bonjour..basically what ever was from apple. Then I also went to start -> run -> regedit and checked for any registry keys for apple under local user and local computer. Deleted if found. Restarted and then just right clicked on the itunes setup file that was downloaded and ran it as administrator. That did it for me. So I am guessing it was privilege thing but not sure. Hope this helps. -
I have trouble installing iTunes. I get an error message "an error occurred during the installation of assembly 'policy.8.0.Microsoft.VC80.CRT.type="win32-policy".version="8.0.50727.6195".pub licKey Token="1fc8b.3b9a1e18e3b" .processorArchitecture-"x86"
OK. You may have to reinstall everything from scratch but follow following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".processorArchitecture="x86""
Repair your Apple Application Support.
Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR -
Cannot install itunes, I keep getting this message:An error occured during the installation of assembly 'Microsoft .VC80.CRT .type="win32" ,version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86"'. Please refer to Help and
Repair your Apple Application Support.
Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR -
Keep getting the following error message when I try to instal itunes 10.6. An error occurred during the installation of assembly 'Microsoft VC80 CRT.type="win 32". version = "8.0 50727.61 95". public Key token = ""1fc8b3b9a1e18e3b." processor architeture = "x86". Please refer to help and support for more information.
HRESULT:0x80073712
The program then acts like it is still trying to load, but then I get another message later which reads:
Service 'Aple Mobile Device' failed to start. verify that you have sufficient privileges to start system services.
any suggestions?HRESULT: 0x80073712
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 80073712, or some other number? (If they're another number, what number are you getting?) -
Tried to install itunes 10/5 and got this error:
An error occured during the installation of assembly 'Micrsoft .VC80.CRT .type="win32" ,version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86"'. Please refer to Help and Support for more information. HRESULT: 0x80073712
Can anyone help solve this problemExactly the same problems as many others with iTunes 10.5 and my Windows 7 32 bit laptop: An error occurred during the installation of assembly 'Microsoft.VC80.CRT .type="win32", … HRESULT:0x800736FD. I followed the Apple instructions to completely uninstall earlier iTunes and all Apple applications and then tried to re-install iTunes 10.5. Numerous attempts. Still no success. Constantly goes through the install and then rolls back after failure.
By unzipping using WinRAR and installing each module separately it seems that the module that fails is the AppleApplicationSupport.msi
Finally I uninstalled everything again and reinstalled iTunes 10.4.1. This installed perfectly. So at least I still have iTunes.
I was able to install iTunes 10.5 on myWindows XP SP3 desktop.
I noticed with WinRAR that the AppleApplicationSupport.msi file with 10.5 is a completely different size to that with 10.4.1. This suggests to me a conflict between the latest AppleApplicationSupport.msi and Windows 7.
Maybe you are looking for
-
Please help guys, I have a Time machine at home and it will not allow me to remove the listing of my external hard drive from the excluded files list. I am trying to use time machine to back up the hard drive. For backing up from Macbooik pro and Ima
-
Exec-timeout doesn't seem to work
I've been having a devil of a time getting exec-timeout to clear idle vty/ssh sessions. This investigation started when we were rolling out new Catalyst 4507R+E switches with Sup7L-E's under IOS XE 03.04.02.SG (what they shipped from the factory with
-
Registering Elements for a club
Hi; Does software have to be registered to a person, or can the user be a club or society? We have a user - chair@clubname - can we set up a club user using that address? Thanks Bob
-
Regarding the Post Installation and SP Level
Hi All, We have installed NWDI on our existing EP Dev Server.Installation was successful but regarding the post installation we are in a thinking as how best we could patch the newly installed NWDI system. As our EP system is on SP 11and NWDI system
-
Jco Connection works on Single server mode, but not over network?
Hello, Error - com.sap.dictionary.runtime.DdException: 'XXXXXX' not properly defined! Unable to create Metadata connection for Dictionary Provider. Either the logical System Name 'XXXXXX' has not been properly defined in the System Landscape Director