"An error occurred in the communication with the BW server"

Hi, when I open BEx Analyzer and try to connect to my BW server to run a query, I get this message, "An error occurred in the communication with the BW server".
Can someone help me.
thanks
Pat.

If it's happening consistently, it could be a problem with your local m/cs MS office and/or SAP GUI.
If it was working before:
1) Uninstall SAP GUI and MS office.
2) Install MS Office and SAP GUI...then try to connect to BW.
Good luck, BB

Similar Messages

An error occurred in the communication with the BW server in BI 7.0

Hi,
When I am trying to access Bex Report from Menu, the following error occurs ´An error occurred in the communication with the BW server'.
I have removed authorization variable from the query and tried, then to error is coming.
Please suggest


Hi
 
Report the problem details to your BASIS Team. They should be able to help you.
 Hope it helps.
 
Cheers
Abhijit
 * It's a good habit to reward someone with points in SDN if you think his/her
response was helpful to you

Internal error in the communication with the IGS (charts)

Hello to all, I have a problem when visualizing the graphics of the reports in BW 3.5 (WAD)
the connection RFC IGS_RFC_DEST has never worked however me same the graphics are visualized, but now I am not able to make that the graphics appear in the WEB.
I thank your help.
Christian.

Hi Christian,
Check the service name in SM59. Look at installation guide for the correct name it should have.
Hope it helps.
Regards,
Diego

"ListenerRfc : unknown error" in communication with the IGS from the WAD

Hi all,
I face a problem with the charts in the web template I built. The source query shown as a table is normally presented but the views from the same query are not displayed at all. The diagnostic message refers to an internal error met during the communication with the IGS. The system activities messages text is "ListenerRfc : unknown error".
Anybody could give me a hand in that case?
Thanks in advance.
Geo

Hi,
The connection is Ok. I asked the admnistrator to restart the server because the IGS was desactivated yesterday in a reboot. The IGS works now... when it wants.
I face a new message : "ListenerRfc: unknown interpreter". It seems the problem is not over.
When I launch the dashboard in the web from the WAD, sometimes it shows the chart of the 1st item with the old message for the 2nd or the new message for the 1st one and a chart for the 2nd item.
Deep thanks for your help. I need nevertheless to solve the problem.
Geo

Undesrtanding Proxy communication with the Integration Engine

I want to understand all the process in a client proxy communication. I know that the Local integration engine sends a PI-SOAP to the Central Integration Engine, and the local integration engine makes the communication with the ICM in the SAP PI side. My question are the next:
1. SAP documentation mentions that the XI Adapter is necessary. Where is it located?, after or before of the ICM in the SAP PI side. What is it function?, because the message is already in PI-SOAP format.
2. How does the local integration engine send the PI-SOAP message? Does it need an XI-Adapter ?.
Thanks in advance.

HI,
1. SAP documentation mentions that the XI Adapter is necessary. Where is it located?, after or before of the ICM in the SAP PI side. What is it function?, because the message is already in PI-SOAP format.
2. How does the local integration engine send the PI-SOAP message? Does it need an XI-Adapter ?.
-->XI Adapter is necessary only at the receiver side not at the sender side, by using proxy pre-configuration steps and proxy framework message from the sender system(Client proxy) will reach PI system. So, in this case XI adapter is not necessary(adapterless communication).
Proxy Framework which consists of Proxy Generator and Proxy Runtime:
Proxy Generator- Converts ABAP corresponding elements to WSDL corresponding elements and viceversa and by using Proxy Runtime, local Integration will be connected to Central Integration.
When a request is sent form client proxy-->ABAP corresponding elements will be converted to WSDL elements and local integration engine will be connected to central integration engine and whole process will be done.
If the receiver system is SAP, and since there can be many SAP systems connected to PI, to send data from PI to that particular receiver SAP system, PI needs the receiver system details like business system name etc. So, XI adapter is manadatory only at the receiver side.
check out this blog for more info:
[http://www.****************/Tutorials/XI/ABAPProxy/page1.htm]
Regards,
Sunitha

An error occurred while communicating with the BI server.

Hi Expert,
A error occured when I finish updating the new patch of the Addon, When I finish updating it, it works okay , but when I reboot the system, it disconnet our server and give the following exception :
An error occurred while communicating with the BI server.
System exception thrown while marshaling .NET type System.Byte[] to RFCTYPE_BYTE.
Are there anyone met such issues?
Please help
Len

Hi,
Are you getting this error while connecting to the Backend through BEx Tools.
Is that system available or System down while connecting.
Rgds,
Murali

Error on timesheet submission "An error occurred while communicating with the server.

Hello, we have many users who are encountering errors submitting timesheets following our migration to Project Server 2013 (SP1 April 2014 CU). The error is:
An error occurred while communicating with the server. Check connectivity with your administrator to determine whether further action is necessary.
This follows the specific timesheet, if I open a delegate session on my machine, I can reproduce the error. However, simply deleting and recreating the timesheet has resolved it for many users, at least until the next timesheet submission.
Has anyone seen this sort of widespread behavior and have a solution beyond deleting and recreating the given timesheet?
Thanks!

Hello Joncantrell
I just ran into issue and found a way to resolve, though it may not be the best. I think it is a bug, but here is how I fixed it.
1) Delegating as the user
2) Deleted the timesheet
3) Going line by line, I check each task that had a status of "Not Submitted" and "Send Progress for Select Task".
4) The error came up only for one task.
5) Open that schedule, remove resource from task, saved and published.
6) Deleted and recreated timesheet
7) Submitted timesheet and processed normally.
I hope this helps
Cheers!
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries

An error occured while communicating with the web server

hi Experts
Im having a problem with bpc when i try to send data in an input schedule
message error prompt
"an error occured while communicating with the webserver"
Any body encounters this?
Thanks

Hi,
I am from support team, so this is the method how I troubleshoot this kind of issue.
First, I would like to say that this error message in BPC for Excel is a very common error, and it means nothing. Please move on the following steps:
1. Reproduce the issue again.
2. Logon to ABAP side, go to RSA1. Enter OBJECT=UJ* and SUBOBJECT=UJQ.
Note: UJQ means query related. The same, you can use UJD to filter all Data Manager's activity.
3. Under UJQ, you will find the log, which you reproduced in step 1. It must be shown as Red. Double-click it. See what the error message is.
4. Besides the error, right-side, you will see a Details button. Click on it, and another window with MDX Statement will show up.
5. Copy the MDX statement out for next usage.
6. Go to another T-code MDXTEST (this is a test tool for MDX statement).
7. Copy the MDX statement into MDXTEST, and run it. (find the run button at above).
What is the error message?
Based on my experience, if this is a Time out error, related to MDX Paser, you can try note:
1032461 MDX parser does not start
If not, it must be a specific error. Need to check further, accordingly.

An error has occurred. There was an error communicating with the server. Please try again later.

I have a simple form which allows users to submit receipts as attachments. I have some required identifying information (name, etc.) and then three optional slots for attachments, along with optional text boxes for descriptions. The form tests fine with attachments on my computer and on a couple other computers we tested with.
However, I am getting complaints from several users that they see the following message when they hit "Submit": "An error has occurred. There was an error communicating with the server. Please try again later." Any ideas why this might be or how I can fix it?

Do you mind emailing the URL of your fillable form to me ([email protected]).
I would like to investigate as to what the issue might be with Internet Explorer.
Sorry for the inconveniences.
Gen

App World Web Plugin Error: An error has occurred communicating with the BlackBerry App World Client.

App World Web Plugin Error
An error has occurred communicating with the BlackBerry App World Client.
Please help me with this problem. I have a new Blackberry Storm 2. When I sign in, it asked me to get the BB appworld browser plug-in and connect my smartphone. So, i did connect it. Then, this message kept on popping out. I don't know how to fix it.

Okay. this is what I do.
I go onto http://appworld.blackberry.com/webstore/ & sign in. I then connect my phone & enter the device password. As soon as I do that, this comes up -> App World Web Plugin Error
An error has occurred communicating with the BlackBerry App World Client.
I don't know what's the problem & I've been searching for a solution but to no avail.

An error occurred while communicating with the database lightswitch

Hi
My Azure project was running just fine. I had made no changes but since yesterday when any user tries to login the get this error message:
"an error occurred while communicating with the database lightswitch"
I found a topic posted by "Mr Yossu" on this topic at
http://social.msdn.microsoft.com/Forums/en-US/lightswitch/thread/655e4f03-d327-40fc-8d3b-8134e91ec2a4
but his situation seems slightly different.
In his case he says "I just updated (ie redeployed) it again, and when I try to log in, I get an error "An error occurred while communicating with the database."
In my case I haven't updated anything.
Any ideas will be greatly appreciated because my system is down until I find a resolution.
Thanks in advance, Mark.
Mark

In checking the helpful suggestion "I guess there is something wrong with the authentication database table", this is what I have done so far.
In the "Database Connections" step of the VS LS Azure publishing wizard, the "Specify the user conection:" is described as:
"This connection will be used by the application to read and write data from the database"
I click the "..." button and click to "Test" the connection and I get "Test connection succeeded".
Next I logged in to SQLAzure and see
this screen.
At this point I'm unsure where to go with this.
If anyone has an idea please let me know.
Thanks, Mark.
Mark

"Error occurred while communicating with the scanner"

Just bought this printer from a friend, and every time I try to scan I get the error message "Scanner reported an error: An error occurred while communicating with the scanner."
Anyone know how to fix this so I can use the scanner?

You @cleoambre are a good friend, you bought the printer and are now trying to help troubleshoot the scanner issue! I would be happy to help you with this
Since this printer is a tad on the older side, there is no full feature software and driver for it to install on 10.6. Instead you can Install the printer using the Apple Software update.
You can still complete scans from the Mac using Preview, Image Capture, or the System Preferences window to scan. I will post a few helpful videos below;
Method one: Scan from the Print & Scan window
Method two: Scan from Apple Preview
Method three: Scan from Apple Image Capture
Please let me know if this information helps to resolve the issue.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

"An error occurred when communicating with the server. Check connectivity with your administrator to determine whether further action is necessary", then attempt to approve TimeSheet.

Kind day, colleague.
It was required to organize a statement chain for TimeSheet of employees, as we realized. Everything is good, but at linear managers in PSW opportunity to execute Approve when viewing TimeSheet of the employee remained, and in attempt to approve TimeSheet there
is a mistake.
500 Internal Server Error
"An error occurred when communicating with the server. Check connectivity with your administrator to determine whether further action is necessary. "
Accept, is carried out as it is necessary.
It is a bug or we not correctly realized approval chain?

issue is related to the user booking time against a task that was past the finish/end date listed in the Project Schedule.
To resolve the user needs to submit their time on a valid task that is still within the current reporting timeframe, or have the Project Manager
update the task in questions so that the finish/end dates are at or beyond the submission period and then republish the project. After that, the user should be able to go in and submit their timesheet with success.
http://patrickdrews.com/2012/09/project-server-2010-timesheet-submission-produces-an-error-occurred-while-communicating-with-the-server/
kirtesh

An error occurred while communicating with the scanner canon mp640

Since 3 weeks I have this error *An error occurred while communicating with the scanner" when I tried to scan some document.
The all in one CANON PIXMA MP640 is connected via WIFI to my network and the printer works without problems.
I have repaired the disk permission but I have the same problem.
I have also removed the Scanner only from the system preferences and re-installed the software CD from CANON, no changes.
Do you have any idea about this type of problem? and help me for a solution?
Thanks a lot for a reply
Amedeo

First, delete the scanner again. Then I would suggest downloading the latest version from the Canon website.
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_s eries/pixma_mp640#DriversAndSoftware
Select your OS and download/install.

I'm trying to scan but instead of the scan a message comes up from PS saying "An error occurred while communicating with the scanner." help- I cannot scan!

I'm trying to scan but instead of the scan a message comes up from PS saying "An error occurred while communicating with the scanner." help- I cannot scan!

Best practices: Usage
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

"An error occurred in the communication with the BW server"

Similar Messages

Maybe you are looking for