"An error occurred in the idisk quota" - A fix.

Hi all.
I am another one of us that has seen this error whilst publishing. Here is my fix, hopefully it will work for others:
Make a temporary folder. (I'll call it Temp and put it on the desktop)
Navigate to ~/Library/Application Support/iWeb and then copy the "Domain.sites" file to "Temp". (This is a precautionary backup that I did not use but felt safer having. The Domain.sites file contains all the information about your iWeb sites)
Navigate to ~/Library/Caches/ and move the "com.apple.iWeb cache" and "iWeb" folders to the "Temp" folder.
Now, mount your iDisk and navigate to /Web/Sites and then delete the entire "iWeb" folder and the "index.html" file. This operation may take a very long time to finish depending on how big your site(s) are - you may want to grab a coffee There should be no need to make a backup of this folder as all the information is contained in the "Domain.sites" file and the next stage will re-create this folder and its contents. (If you want to though, there is nothing stopping you from making a backup)
After they have been successfully deleted from your iDisk, open iWeb. Your sites should all load up as normal. Now, click on the File menu and then hold down the option ( ⌥ ) key. You should see the "Publish to .Mac" option change to a "Publish ALL to .Mac"
Still holding option, click "Publish ALL to .Mac". Now, all of your sites should start being republished and when finished your site should be successfully reinstated. (Once again, this may take a while so you might want to get another coffee
I hope that this solves the problem for others like it has for me. If all has gone well and your iWeb life is back to normal you can delete the "Temp" folder. (As I said - I never used the backups)
Sam

Hi Raj,
What happens when you try and import users(via- text file)? Are you able to create users then?
As mentioned in replies above please ensure the user has SAP_BC_JSF_COMMUNICATION - Role with an active profile. Also, please do check the note 718383 and check the following link http://help.sap.com/saphelp_nw2004s/helpdata/en/49/9dd53f779c4e21e10000000a1550b0/frameset.htm
Also, ensure that you restart the portal system.
~Cheers,
Vivek

Similar Messages

"Error: An error occured deleting the import map"

Hello,
When trying to delete imported data, I get the following message :
Error: An error occured deleting the import map
Detail: Data access error
And the imported data aren't deleted.
The loaded file has around 350000 rows for 12 dimensions.
I never succeeded to load it in one time, only in 3 times with 3 files. It was a first issue.
And I want now to delete the import to do it again and I can't, due to the error.
Thanks
Patrick
PS : FDM version 11.1.1.3.01
Log :
** Begin FDM Runtime Error Log Entry [2013-04-03-08:49:22] **
ERROR:
Code............................................. -2147217900
Description...................................... ORA-30036: unable to extend segment by 8 in undo tablespace 'UNDOTBS1'
DELETE FROM tDataSeg3 WHERE ((PartitionKey) = 749) AND (TO_CHAR(PeriodKey,N'YYYYMMDD') Between N'20111231' And N'20111231') AND ((CatKey) = 12)
Procedure........................................ clsDataManipulation.fExecuteDML
Component........................................ upsWDataWindowDM
Version.......................................... 1111
Thread........................................... 4956
IDENTIFICATION:
User............................................. ollivierp
Computer Name.................................... EPM05
App Name......................................... FDM_MCHII
Client App....................................... WebClient
CONNECTION:
Provider......................................... ORAOLEDB.ORACLE
Data Server......................................
Database Name.................................... poh1
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... HPMCHII
Location ID...................................... 749
Location Seg..................................... 3
Category......................................... COMPTE
Category ID...................................... 12
Period........................................... Dec - 2011
Period ID........................................ 31/12/2011
POV Local........................................ False
Language......................................... 1033
User Level....................................... 1
All Partitions................................... False
Is Auditor....................................... False
** Begin FDM Runtime Error Log Entry [2013-04-03-08:49:22] **
ERROR:
Code............................................. -2147217900
Description...................................... Data access error.
Procedure........................................ clsImpProcessMgr.fClearData
Component........................................ upsWObjectsDM
Version.......................................... 1111
Thread........................................... 4956
IDENTIFICATION:
User............................................. ollivierp
Computer Name.................................... EPM05
App Name......................................... FDM_MCHII
Client App....................................... WebClient
CONNECTION:
Provider......................................... ORAOLEDB.ORACLE
Data Server......................................
Database Name.................................... poh1
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... HPMCHII
Location ID...................................... 749
Location Seg..................................... 3
Category......................................... COMPTE
Category ID...................................... 12
Period........................................... Dec - 2011
Period ID........................................ 31/12/2011
POV Local........................................ False
Language......................................... 1033
User Level....................................... 1
All Partitions................................... False
Is Auditor....................................... False
Edited by: user1104274 on 3 avr. 2013 00:10

The quota on the tablespace 'UNDOTBS1' needs to be extended to allow for the tablespace to grow. Right now it has met it's maximum quota.

An Error occurred in the following Event Subscription: Event Subscription

Dear All,
i got a mail from WF mail which is below:
+From: XXXX WAX [mailto:wfmailer@XXX WAX.com.xx]+
Sent: Monday, March 28, 2011 3:24 PM
To: XXxxHrmsSupport
Subject: Action Required: Local Event ERROR : oracle.apps.ar.hz.Location.update / oracle.apps.ar.hz.Location.update32336
To SYSADMIN
Sent 28-MAR-11 15:23:08
ID 265172
An Error occurred in the following Event Subscription: Event Subscription
Event Error Name:
Event Error Message:
Event Error Stack:
Event Data: Event Data URL
Other Event Details:
Event Field                    Value
Event Name                  oracle.apps.ar.hz.Location.update
Event Key                    oracle.apps.ar.hz.Location.update32336
From Agent                  WF_DEFERRED
From System                 PROD.OWSC.COM
To Agent
To System
Priority                          50
Send Date                  28-MAR-2011 15:20:18
Receive Date              28-MAR-2011 15:21:35
Correlation ID
Parameter : USER_ID 2085
Parameter : RESP_ID 50348
Parameter : RESP_APPL_ID 660
Parameter : SECURITY_GROUP_ID 0
Parameter : ORG_ID 81
Parameter : LOCATION_ID 924
Parameter : #CURRENT_PHASE 101
Parameter : ERROR_TYPE ERROR
Parameter : SUB_GUID A242DC2FF79D70A7E030
Action History
Num
Action Date
Action
From
To
Details 1
+28-MAR-11 15:23:08+
Submit
SYSADMIN
SYSADMIN
Please click on one of the following choices to automatically generate an E-mail response. Before sending the E-mail response to close this notification, ensure all response prompts include a desired response value within quotes.
Retry Raise Event
Retry Raise Event: Abort   Raise Event with Event Key   Raise Event with Event Key and Event Data   Raise with Event Key, Event Data and Parameters Request Information
The client expecting detailed mail regarding this OED.. kindly help me to find this WF mail answer,,
What is this mail, what is the reason, what action i have to take for this ?
Regards
Hameed

Dear Hussein,
Thank you for your support,
You have mention the excat document which is realted to my error.
Oracle.Apps.Ar.Hz.Location.Update / Oracle.Apps.Ar.Hz.Location.UpdateXXXXXX [ID 352888.1]i saw the soultion in this above document, still i have dought will you kindly clarify me !!
· If the event is enabled with subscriptions and that is giving some error message, it means that the user is trying to update the location and he is doing something wrong. Is this correct?
· If I disable the subscription from the production will that create any problem?
Kindly expecting your suggestion
Regards
Hameed
OS: Windows server 2003
Application : 11.5.10.2.0

A fatal error occured in the PD Layer during RFx response

Dear Experts,
While creating the RFx response the error is,
"A fatal error occured in the PD Layer. The transaction needs to be terminated."
I just checked the earlier threads discussed on this forum says, this is due to non maintaining of number ranges , but i have maintained the no ranges for RFx response,
got stuck here, kindly help me to solve this issue.
Thanks

Sorry wrongly posted... the details are below.
The Rfx response no range 01 & 02 are matching with transaction type Supplier quote 01 & 02,
In Define Transaction type -- for Transaction category BUS2200 -- Transaction type RFQU -- the entries are
*Tran.cat Trns.type subsequent obj.type Follow up trns.type
*Bus2200 RFQU BUS2202 ECPO
The entries are correct or not???
Regards
Rakesh

Outlook 2013 - Password change breaks S/MIME Certs "An error occurred in the underlying security system. Key not valid for us in specified state."

AD password change comes up, user changes password.
Tries to send signed or encrypted email with a Comodo S/MIME certificate, and gets the following error:
""An error occurred in the underlying security system. Key not valid for us in specified state."
I now have two reports of this error - one on Windows 7, and one on Windows 8.0 (remote user).
The one on Windows 8.0, we tried removing their S/MIME cert from Outlook/Windows and re-adding, this did NOT resolve the issue.
Plan was originally to have the 8.0 user ship their machine in, and wipe it, since nothing else could fix it and I wasn't finding anyone else with the same issue. Now that I've got a second user with the same issue, its looking like a bug/issue and
not a random glitch.
Thanks in advance for any and all help with this!

Hi,
Thank you for your question.
I am trying to involve someone familiar with this topic to further look at this issue.
Thanks,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

I get error message: "An error occurred with the publication of album...Authentication with server failed...whenever I open a facebook file in my iPhoto. In each file, most of my photos have disappeared. What do I need to do?

I get error message: "An error occurred with the publication of album...Authentication with server failed. Please check your login and password information" whenever I open a facebook file in my iPhoto. In each file, most of my photos have disappeared. I am hoping I can retrieve these "lost" files. What do I need to do?

Message was edited by: leroydouglas
better yet, try this solution:
https://discussions.apple.com/message/12351186#12351186

I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".

I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".processorArchitecture="x86""

Repair your Apple Application Support.
Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR

Error occured in the phase MOVE NAMETABS while updating patch.

Hi Gurus
When i implementing a SP15 to SP16 in a queue, i got the Dump.
Please help me in this issue.
The import was stopped, since an error occurred during the phase
   IMPORT_PROPER, which the Support Package Manager is unable to resolve
   without your input.
   After you have corrected the cause of the error, continue with the
   import by choosing Support Package -> Import queue from the initial
   screen of the Support Package Manager.
   The following details help you to analyze the problem:
       -   Error in phase: IMPORT_PROPER
       -   Reason for error: TP_STEP_FAILURE
       -   Return code: 0008
       -   Error message: OCS Package ALL, tp step "6", return code 0008
   Notes on phase IMPORT_PROPER
   In this phase repository objects and table entries are imported. This
   phase can terminate due to the following reasons:
   o   TP_INTERFACE_FAILURE: The tp interface could not be called.
   o   TP_FAILURE: The program tp could not be executed. For more
       information on this, see the SLOG or ALOG log file.
   o   TP_STEP_FAILURE: A tp step could not be executed. To find the cause
       of the error, see the appropriate log, such as the import log.
       If the cancelation message contains a tp step 6, N or S, the step in
       question is independent of the transport request. You can find these
       logs under the node Import steps not specific to transport request
       in the log overview.
       Alternatively, you can find these logs in the following files in the
       log directory of your transport directory (usually:
       /usr/sap/trans/log):
    -   tp Step 6: P<YY><MM><DD>.<SID>
    -   tp Step N: N<YY><MM><DD>.<SID>
    -   tp Step S: DS<YY><MM><DD>.<SID>
    You can display these files using the report RSPUTPRT or by calling
    transaction AL11.
A prerequisite of the Support Package Manager is that the Change and
Transport System (CTS) is configured correctly. For more detailed
information, read the online documentation available from Help -> SAP
Library -> mySAP Technology Components -> SAP Web Application Server ->
Change and Transport System .
A list of the most important SAP Notes for Online Correction Support
(OCS) is available in SAP Note 97620, which is updated regularly.
Regards,
Ganesh

Hi jazz,
I want to update the patch SAPKA70016 for SAP_ABA component.
Queue log
System              : ISP
tp path             : tp
Version and release: 372.04.36 700
Activate inactive nametabs
End date and time : 20081215012202
Ended with return code: ===> 8 <===
TP request log is
START CMDIMPORT            ISP L      20081222014354              DDIC         usirs254 20081222014354043
STOP CMDIMPORT            ISP L      20081222014401              DDIC         usirs254 20081222014354043
START DD IMPORT            ISP H      20081222014540              DDIC         usirs254 20081222014540574
STOP DD IMPORT            ISP H      20081222014616              DDIC         usirs254 20081222014540574
START DD ACTIVATION        ISP A      20081222014617              DDIC         usirs254
START tp_getprots          ISP J      20081222014617              DDIC         usirs254
STOP tp_getprots          ISP J      20081222014723              DDIC         usirs254
STOP DD ACTIVATION        ISP A      20081222014723              DDIC         usirs254
START imp all              ISP        20081222014723              DDIC         usirs254 20081222014723434
INFO: event SAP_IMPORT_START triggered successfully
START DISTRIBUTION OF DD-O ISP S      20081222014723              DDIC         usirs254 20081222014723434
START tp_getprots          ISP S      20081222014723              DDIC         usirs254 20081222014723434
STOP tp_getprots          ISP S      20081222014726              DDIC         usirs254 20081222014723434
STOP DISTRIBUTION OF DD-O ISP S      20081222014726              DDIC         usirs254 20081222014723434
INFO TBATG CONVERSION OF ISP N      not needed                  DDIC         usirs254 20081222014723434
START MOVE NAMETABS        ISP 6      20081222014726              DDIC         usirs254 20081222014723434
START tp_getprots          ISP P      20081222014726              DDIC         usirs254 20081222014723434
ERROR ALL                  ISP 6 0008 20081222014743              DDIC         usirs254 20081222014723434
STOP tp_getprots          ISP P      20081222014747              DDIC         usirs254 20081222014723434
STOP MOVE NAMETABS        ISP 6      20081222014747              DDIC         usirs254 20081222014723434
ERROR: stopping on error 8 during MOVE NAMETABS
START INFORM SAP-SYSTEM OF ISP Q      20081222014747              DDIC         usirs254 20081222014723434
START tp_getprots          ISP Q      20081222014747              DDIC         usirs254 20081222014723434
STOP tp_getprots          ISP Q      20081222014748              DDIC         usirs254 20081222014723434
STOP INFORM SAP-SYSTEM OF ISP Q      20081222014748              DDIC         usirs254 20081222014723434
STOP imp all              ISP   0008 20081222014748              DDIC         usirs254 20081222014723434
START CMDIMPORT            ISP L      20081222015155              DDIC         usirs254 20081222015155637
STOP CMDIMPORT            ISP L      20081222015158              DDIC         usirs254 20081222015155637

An error occurred in the core cache

Hi All
<b>I have posted this Message almost 3 to 4 time , but no one has replied , as they have never come across the problem, if this is the case , we shud take those ases first. pls help !!!!</b>
Case : ISA B2C CRM
Deploying through SDM
I have created New Custom B2C as per Extension Template
Action
Business Object Manager
Business Object
Backend Interface
Backend Object
Created Entries in bom-config.xml & backendobject-config.xml as well
Classes are as per Extension.
My Modified Application was working Fine ==> It has passed all layers & retriving DATA from CRM & Displaying on Custom JSP.
Now what is the intresting point i am facing is the EAR which has been deployed successfully & Running before Server Restart is only Working.
, when i Create new EAR ( with Same context node) & deploy , after launching that Application this Errors Come( yes i have undeployed the Working EAR as the context node is same)
500 Internal Server Error
SAP J2EE Engine/6.40
Application error occurred during request processing.
Details: Error [com.sap.engine.services.servlets_jsp.server.exceptions.WebServletException:
Error while servlet [action] is initialized with a run-as identity.],
with root cause [java.security.PrivilegedActionException: null].
Exception id: [0002A56BEBF7005700000112000007A400041641E2ED396E]
Now it the same case with each n every EAR with different contextnode which i create through isa build tool ( but earlier it was not the case though i am following same procedure for creating ear)
What is going Wrong !!!!!!!!!!!!!.
Is there is any problem with SDM !!!!.
When i have gone to Logs isaerror.log
#1.5#0002A56BEBF7003E00000039000007A400041642BB7830DC#1150375776023#bccom.sapmarkets.isa.core.cache.CacheInitHandler#sap.com/crm.b2c_b2cApp#bccom.sapmarkets.isa.core.cache.CacheInitHandler#J2EE_ADMIN#542##ilggladev04_C4D_4756250#Guest#65318570fc6d11dac2c90002a56bebf7#SAPEngine_Application_Thread[impl:3]_19##0#0#Error#1#/#Plain###[undefined|system.cache.exception] An error occurred in the core cache "region 'XCM_SESSION_SCOPE' already exists in cache"# #1.5#0002A56BEBF7003E0000003A000007A400041642BB7A1624#1150375776132#bccom.sapmarkets.isa.core.cache.CacheInitHandler#sap.com/crm.b2c_b2cApp#bccom.sapmarkets.isa.core.cache.CacheInitHandler#J2EE_ADMIN#542##ilggladev04_C4D_4756250#Guest#65318570fc6d11dac2c90002a56bebf7#SAPEngine_Application_Thread[impl:3]_19##0#0#Error#1#/#Plain###[undefined|system.cache.exception] An error occurred in the core cache "region 'XCM_APP_SCOPE' already exists in cache"# #1.5#0002A56BEBF7003E0000003B000007A400041642BE2515F7#1150375820912#bccom.sapmarkets.isa.core.init.InitializationHanlder.performInitialization#sap.com/crm.b2c_b2cApp#bccom.sapmarkets.isa.core.init.InitializationHanlder.performInitialization#J2EE_ADMIN#542##ilggladev04_C4D_4756250#Guest#65318570fc6d11dac2c90002a56bebf7#SAPEngine_Application_Thread[impl:3]_19##0#0#Error#1#/#Plain###[undefined|system.initFailed] Initalization of com.sapmarkets.isa.core.xcm.init.ExtendedConfigInitHandler failed
java.lang.StackOverflowError #
then I have come to Point that there is somthing wrong with Cach Control Configuration .
with errors as follows
An error occurred in the core cache "region 'XCM_SESSION_SCOPE' already exists in cache"#
An error occurred in the core cache "region 'XCM_APP_SCOPE' already exists in cache"#
Initalization of com.sapmarkets.isa.core.xcm.init.ExtendedConfigInitHandler failed
I tried to clear the cache through http://localhost:50000/b2c_b2cApp/admin/index.jsp
but the page comes blank without any links
Initially this was not the Problem , now how it is Coming !!!! But as far as i know , once our Development Server was Restarted .( not just j2ee Server)
Now after that whatever new EAR i m building ( locally) is not coming Properly
Please can u throw some Light on that.
pls help me , i believe , u all can solve my problem
Please Reply Soon
Thanks & Regards
Ravi Sah

Hi
can some body look at this issue .
I will be very thankful to you all.
Thanks & regards
Ravi Sah

Problem: An error occured during the uploading process.

Hello! I've searched around but I am having difficulty finding a solution to this problem.
I am trying to upload videos through Adobe Premiere Elements 9 to YouTube, using the preset options in the share tab. This worked previously without issue, but then one day I continually ran into an error stating "Sorry, an error occured during the uploading process. Please try again later." However, it eventually started working. It is now a few weeks later, and I am having the very same issue. I am unable to upload to YouTube or any other service through the Share tab. Even loading the software itself, the opening splash screen is unable to grab my Adobe ID. It never stops "Gathering User Info..."
Steps I have tried:
Going to Edit -> Preferences -> Web Sharing and hitting the refresh button to update settings.
Checked router settings.
Enabled DMZ on router and linked it to this specific computer.
Rebooted PC and router, and tried updating the Web Sharing settings multiple times.
I honestly do not believe it to be a router issue, especially since it is currently in DMZ mode and I have had absolutely no trouble with any other software. This has continued to baffle me though, and finding help is difficult. Searches keep giving me encoding settings for YouTube videos, and few results pertain to this particular issue.
I am aware I could export the video normally and upload through YouTube that way, but on DSL, my upload speed is pretty terrible for a high quality video. The YouTube HD setting has been great for me in the past, as files are small but still look great online. I would really like to get it working again, both for ease and convenience for simple projects.
If anyone has any ideas as to what could be causing a problem, I would be greatly appreciative of any advice. In regards to the project itself, there is no real editing being done at this point, as I am trying to eliminate any possibility of error elsewhere. I opened a new project, added a video clip and went directly to upload it, resulting in the error above.
I don't believe it matters in this situation, but just in case:
Windows 7
AMD Phenom II X4 820 - 2.80 GHz
6 GB RAM
Radeon HD 5880 1GB
Connecting through a Netgear WNDR3400 router, standard DSL connection.

Sorry, not seeing where to edit my original post.
Just wanted to add, that I am able to visit both the Photoshop.com website, as well as YouTube through my browser. So I am not being blocked somehow to those particular sites. It only seems to be through the software that I cannot connect to any of the online services to upload videos to.
Additionally, the only virus software running is Microsoft Security Essentials. It has never raised a flag before with this software or caused interference in the past. I do not use Norton or any other service which are known to interfere with programs often.
Just a quick example as well, pinging Photoshop.com through the command prompt shows I am getting through just fine. As you can see in this image though, it cannot seem to ever connect and grab my user information.
http://i.imgur.com/S53xN.png

Error: An error occurred importing the file. Detail: File does not exist or

Hi,
I am getting the error the below error while importing the file in FDM. I have read and write access to the folder. I tried loading text and excel files, I am getting the same error.
An error occurred importing the file.
Detail: File does not exist or access denied.
Thanks.

Hi Tony,
Thanks for the reply.
I have Oracle Database and the version is 11.1.0.7; So even for this version do I need to have SQLLDR.exe on the server where FDM is installed.
Thanks,
Edited by: user10720012 on May 16, 2011 11:42 AM

An unexpected error occurred while the job was running. (ID 104 Details: The parameter is incorrect (0x80070057))

We are using DPM Version: 4.1.3465.0 with System Center 2012 Service Pack 1 to back up VMs in our Hyper V Cluster. We have a total of 37 VMs with a combination of 2008r2 servers and 2012 servers. One of our 2012 servers will not backup, and we consistently
get the message "An unexpected error occurred while the job was running. (ID 104 Details: The parameter is incorrect (0x80070057))". I have seen this error message when I Googled it, but cannot get past it. I have deleted the Protection Group and
data and tried to re-create, but get the same errors. I also thought the the server might be mis-reporting the data size, but I expanded that to cover the replication data. I have also tried to perform consistancy checks multiple times with no luck. I have
not seen a difinitive answer from my Google searches, so was hopeful someone has seen this also, and have had success in resolving. Currently this server has no backup recovery points, so I am worried if it does crash. I think I have the rollups installed
as well.

Hi Kelly,
does the issue still persists?

"An error occurred sending the command to the application" When trying to open excel document from outlook 2007

Error message "An error occurred sending the command to the application" When trying to open excel document from outlook 2007.
OS: Windows Server 2008 R2
If I save the document then it opens fine, messing with default file associations does not resolve this problem, I've googled for ir it and some suggest unticking compatibility mode or "run as admin" for excel application, neither is selected in my case.
Outlook is configured to run as remote application from remoteApp server, this error is only occurring for one user, for others excel documents open just fine.

Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, we can Create a trusted location follow these steps
Click the Microsoft Office Button , and then click Excel Options.
Click Trust Center, click Trust Center Settings, and then click
Trusted Locations.
If you want to create a trusted location that is not local to your computer, select the Allow trusted locations on my network (not recommended) check
box.
Click Add new location.
IMPORTANT We recommended that you don't make your entire
Documents or My Documents folder a trusted location. Doing so creates a larger target for a hacker to potentially exploit and increases your security risk. Create a subfolder within Documents or My Documents, and make only that folder a trusted location.
In the Path box, type the name of the folder that you want to use as a trusted location, or click Browse to
locate the folder.
If you want to include subfolders as trusted locations, select the
Subfolders of this location are also trusted check box.
In the Description box, type what you want to describe the purpose of the trusted location.
Click OK.
More detailed information you can refer to this link:
http://office.microsoft.com/en-us/word-help/create-remove-or-change-a-trusted-location-for-your-files-HA010031999.aspx?CTT=1#BM12
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHN
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

An error occurred in the persistence; contact your system administrator

HI,
when i am going to create user in user administration , it showing this error message An error occurred in the persistence; contact your system administrator. Post installtion steps i mean visual j2ee admin tool , sld i configured. every thing is fine expect this problem .
I got one answer i think we need sap jsf user. I found in the users area sap jsf user . but there is no roles assigned to sap jsf user.
How can i create role related to sap jsf user. please reply . reply will highly appreciated.

Hi, how did this get resolved?
Regards,
Vishal

Error occurred in the data selection

Hi Expert,
I met issue when full loading data from R3 via customized datasource.
the error message in request monitor is:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
I checked in RSA3, the data extraction is successful, but in BW, when execute the infopackage with or without data selection, both failed due to the same error.
I also checked the background job in SM37 in source system, the background BI* completed successfully, and the IDoc in both BW and source system processed successfully.
I also tried to replicate datasource and activate is using RSDS_DATASOURCE_ACTIVATE_ALL, delete infopackage and recreate it. but seems all this didn't work.
Could u pls tell me how to solve this issue? Thanks.
Eileen

Hello Eileen zhang,
I have exactly the same error as you, do you still remember how did you solved this problem?
Regards,
Thanks,
Maria João
Error message:
"Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request."

"An error occurred in the idisk quota" - A fix.

Similar Messages

Maybe you are looking for