An error occurred sending mail: The mail server sent an incorrect greeting: * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE STARTTLS AUTH
Hi, I am receiving emails but whenever I try and send I get the following message:
unable to send emails An error occurred sending mail: The mail server sent an incorrect greeting: * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE STARTTLS AUTH=PLAIN AUTH=LOGIN] Dovecot ready..
What are your settings in Tools(or AppMenu/Options)/Account Settings/Outgoing Server (SMTP)? The error message suggests you must have STARTTLS connection security and normal password authentication:
https://getsatisfaction.com/mozilla_messaging/topics/mail_preferences-t1xeq
Similar Messages
-
An error occurred while contacting the LDAP server.
An error occurred while contacting the LDAP server.
(No such object)
The server could not locate the entry. If adding a new entry, be sure that the parent of the entry you are trying to add exists. If you received this error while searching or viewing an entry, it indicates that the entry which was being searched for does not exist.I did the silly thing, i gave Base DN as o=domainname.com,which is supposed to give like dc=domainname, dc=com and restarted the server. LDAP works fine.
-
This issue has popped up before then went away after I switched to SSL setings as suggested by my website host. Or...was it pure coincidence? Same problem today and I haven't made any changes since the above mentioned and have had many successful emails sent. Can't reply or send emails and the draft gets removed from the draft folder even if I saved it before hitting send. Thank you!
Thank you Matt. I'm sure this will be frustrating ...but the more I think about this problem there more info I have to share. The emails I write that do not get sent do end up in my "sent" folder but never reach the recipient. And, most perplexing, the issue/problem is sporadic. It was coming and going before I switched over to the SSL/TLS option in T-bird. And...since the switch it has reappeared and disappeared. I have made zero changes other than the above mentioned. I did get a security update today for T-bird perhaps this will help?
I read your link, thank you.
I obviously don't understand how these systems work. I'm baffled how an issue like this can come and go... -
Can't send email. Get error: "An error occurred while sending. The mail sever responded: From address is not valid [R0107001]. Please verify your email address is correct in your Mail Preference and try again."
My email ([email protected]) is correct.
After receiving the error message I try to resend. Get second error message. BUT AFTER ABOUT SIX TRYS THE MESSAGE IS SENT.
What shall I do???problem solved. an update thunderbird message showed up, did update and now works. WOW!
-
Error: Not able send mail from OWA 2010. When I send mail, the mails go to Drafts Folder.
Error: Not able to send mail from OWA 2010. When I send mail, the mails go to Drafts Folder. I have installed everything correctly but when I tried to open the OWA and trying to send mail from OWA. The mails do not deliver and mails become saved in Drafts folder. I tried to re-send messaged from Draft also but not able to send.
Screen Shot: http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/Error%20-%20Not%20Able%20to%20Send%20Mail%20from%20OWA%202010.docx
Scenario: I have below configuration of exchange 2010 server Setup:
1. Windows Domain Controller with Global Catalog on Windows Server 2008 which only for Windows 2008 Server Native.
Server Name: WDC2010
Domain: Blazex.Com
2. Hub/Client Access Server: It is installed on Windows Server 2008. As per Microsoft recommendation, I have just installed Windows Server 2008 and then join this computer to Blazex.com.
After that installed the Hub/Client Access Exchange role servers.
Server Name: HC2010.blazex.com (This is not a Addition Member server or ADC)
Role: Hub and Client Access Server.
3. Mailbox Server: It is installed on Windows Server 2008. As per Microsoft recommendation, I have just installed Windows Server 2008 and then join this computer to Blazex.com.
After that installed the Mailbox Exchange role servers.
Server Name: MBX2010.blazex.com (This is not a Addition Member server or ADC)
Role: Mailbox Server.
4. 2nd Mailbox Server: It is installed on Windows Server 2008. As per Microsoft recommendation, I have just installed Windows Server 2008 and then join this computer to Blazex.com.
After that installed the Mailbox Exchange role servers.
Server Name: 2MBX2010.blazex.com (This is not a Addition Member server or ADC)
Role: Mailbox Server.
5. Client Windows 7: It is installed on Windows 7 Ultimate Workstation. As per Microsoft recommendation, I have just installed Windows 7 and then join this computer to Blazex.com.
Workstation Name: WIN7.blazex.com
Role: Workstation
Error Description: I have installed everything correctly but when I tried to open the OWA and trying to send mail from OWA. The mails do not deliver and mails become saved in Drafts folder. I tried to re-send messaged from Draft also but not able to send.
Screen Shot (Same As Above): http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/Error%20-%20Not%20Able%20to%20Send%20Mail%20from%20OWA%202010.docx
I don't know what I am missing but I think there is some configuration I need to do on Hub/Client Access Server (HC2010). I tried to access the mailbox on XP Client system through OWA. I get the same problem as Win7.
Can someone please help me on this?
Thanks and Regards
ShambhuHi Subhash,
I have done the troubleshooting but I didn't find any problem at server side. I will send you mail also with all EXBPA report and as well DC, HC and Mailbox servers' Application Log and System Log.
Below are the questions's answers which was asked by you:
1. Please check whether you can send email via Outlook.
I am not able to open the MS Outlook. Please check all details in this thread : http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/c491c5c7-7d6f-48ff-97fa-6bf83d94e53c
2. Please run EXBPA to have a health scan.
I have run the EXBPA and didn't see any critical Problem. I have took the screen shot and report. Please have a look in below screen shot link:
a. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/EXBPA.docx - Final Report
b. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.BaseLine.200906270226501077.data.xml - Baseline Health Check
c. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.Connectivity%20Test.200906270223318201.data.xml - Connectivity Check
d. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.Health%20Check.200906270125477730.data.xml - Health Check with 2 Hr. Baseline option
e. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.Permission%20Check.200906270224343377.data.xml - Permission Report
The error which I received in EXBPA, that allready ignored by you and told that it is bug in EXBPA. Have a look here: http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/d4bb03bb-db84-4a8b-83ba-19937d7dcacf
3. Please check application log, whether any error event logged there. They could come from ADAccess related error or etc.
I didn't see any ADAccess event on the server. For this I have left my lab PC open and I will check again.
4. We find that if mail .que gets corrupt, then this issue will occur, please try to move the affected user to another store and then test the issue.
I am facing this problem with all users (7 users). Anyway I moved one user from one server Mailbox Database (2mbx2010) to Other Server Mailbox Database (mbx2010). After that
a) Rebooted the Workstation
b) Login successfully with same user.
c) Delete the Old MS Outlook Profile
d) Create New profile for same user without any problem.
e) Tried to login in MS Outlook and got the same error. : http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/c491c5c7-7d6f-48ff-97fa-6bf83d94e53c
f) Open the OWA successfully for Same user.
g) Tried to send mail but again mail went to Drafts Folder.
5. I noticed that you test the issue after you close outlook. I recommend you to reboot your pc and then access
mailbox via OWA to test the issue.
I tried you suggested option, but sorry it also couldn't help.
6. You also check your disk space.
All Servers have Enough Disk Space. Check the EXBPA Report.
7. You may run EXTRA to get log information for further troubleshooting.
Need more time for this.
8. Please save application log, system log as *.evt file, then send them with EXTRA,EXBPA report to [email protected] .
I have sent it as your mentioned mail address OR, you can get the mentioned log from below link also:
a) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/WDC2010%7C_APPLICATION.evtx - DC/GC Application Log
b) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/WDC2010%7C_SYSTEMEVENT.evtx - DC/GC System Log
c) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/HC2010%7C_APPLICATION.evtx - Hub/Client Application Log
d) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/HC2010%7C_SYSTEM.evtx - Hub/Client System Log
e) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/MBX2010%7C_Application.evtx - Mailbox Application Log
f) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/MBX2010%7C_System.evtx - Mailbox System Log
There will be some error log you will be that the system is not able to communicate with DC/DC, MBX or HC at everyday around 3 AM or some time 6 PM Evening also. These error came because I have installed VM on Windows 7 Workstation and after 45 min or one hrs. if I don't work on PC, then pc goes to sleep. so you may ignore these alerts.
I hope my answer will give you some clue and I expect more help from your side.
With Best Regards
Shambhu Sharma -
Error message "An error occurred sending the command to the application" When trying to open excel document from outlook 2007.
OS: Windows Server 2008 R2
If I save the document then it opens fine, messing with default file associations does not resolve this problem, I've googled for ir it and some suggest unticking compatibility mode or "run as admin" for excel application, neither is selected in my case.
Outlook is configured to run as remote application from remoteApp server, this error is only occurring for one user, for others excel documents open just fine.Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, we can Create a trusted location follow these steps
Click the Microsoft Office Button , and then click Excel Options.
Click Trust Center, click Trust Center Settings, and then click
Trusted Locations.
If you want to create a trusted location that is not local to your computer, select the Allow trusted locations on my network (not recommended) check
box.
Click Add new location.
IMPORTANT We recommended that you don't make your entire
Documents or My Documents folder a trusted location. Doing so creates a larger target for a hacker to potentially exploit and increases your security risk. Create a subfolder within Documents or My Documents, and make only that folder a trusted location.
In the Path box, type the name of the folder that you want to use as a trusted location, or click Browse to
locate the folder.
If you want to include subfolders as trusted locations, select the
Subfolders of this location are also trusted check box.
In the Description box, type what you want to describe the purpose of the trusted location.
Click OK.
More detailed information you can refer to this link:
http://office.microsoft.com/en-us/word-help/create-remove-or-change-a-trusted-location-for-your-files-HA010031999.aspx?CTT=1#BM12
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHN
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
When I connect to the SharePoint site that contains the lists I need to build my query from , Power Query enumerates the list and displays them in the tool. I can click on the system tables and view the records but any table
in the list I created returns this error.
I can connect fine with InfoPath
[DataSource.Error] SharePoint: Request failed: The remote server returned an error: (500) Internal Server Error. (An error occurred while processing this request.)
thank you for your help
Andrew
Hi Andrew. In order for us diagnose this issue, you'll need to capture some network traces using a tool such as Fiddler and share them by sending a Frown.
To capture a trace using Fiddler, start Fiddler, enable the Tools > Fiddler Options > HTTPS > Decrypt HTTPS traffic option, start the capture, reproduce your issue, then stop and save the capture. You can find more information here.
Once you've done that, please send a Frown through the Power Query ribbon and attach the traces.
Thanks,
Ehren -
Do we need to create the mx records if the send/receive the mail in the same organization?
1,May I know do we need to create the mx records if we send/receive the mail in the same organization?
2,If we send /receive the mail between two different organization/forest, we need to create the mx records ,is it right?
Please click the Mark as Answer button if a post solves your problem!1,May I know do we need to create the mx records if we send/receive the mail in the same organization?
2,If we send /receive the mail between two different organization/forest, we need to create the mx records ,is it right?
Please click the Mark as Answer button if a post solves your problem!
for 1. If you mean the same Exchange org, no.
For 2, it depends. You need a MX record for your receiving SMTP server ( At least, You *should* have one), but if sending to another org, not necessarily, as you could smarthost messages to it and a MX would not be required.
Just curious, what problem are you trying to solve?
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied. -
Hi !
I have an requiremnet to add the sender of the mailer which is most likly hard core i. abc@*******in the Call Function
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
Please guide .
Regards
SheetalHi !
Not able to understand the given solution ..m required to add sender in the mail from abap and currently using the Call Function :SO_NEW_DOCUMENT_SEND_API1
FORM MAIL USING ERRORCODE TYPE I.
Recipients
SELECT SINGLE PARAMVALUE
FROM ZIBHR_PARAMS
INTO LV_MAIL1
WHERE PARAMCODE EQ 'MAIL_ID_EXCP_1'.
SELECT SINGLE PARAMVALUE
FROM ZIBHR_PARAMS
INTO LV_MAIL2
WHERE PARAMCODE EQ 'MAIL_ID_EXCP_2'.
IF LV_MAIL1 NE ''.
lt_mailrecipients-rec_type = 'U'.
lt_mailrecipients-receiver = LV_MAIL1.
APPEND lt_mailrecipients .
CLEAR lt_mailrecipients .
ENDIF.
IF LV_MAIL2 NE ''.
lt_mailrecipients-rec_type = 'U'.
lt_mailrecipients-receiver = LV_MAIL2.
APPEND lt_mailrecipients .
CLEAR lt_mailrecipients .
ENDIF.
IF LV_MAIL1 NE '' AND LV_MAIL2 NE ''.
lt_mailrecipients-rec_type = 'U'.
lt_mailrecipients-receiver = at .....com.
APPEND lt_mailrecipients .
CLEAR lt_mailrecipients .
ENDIF.
IF ERRORCODE = '1'.
Subject.
lt_mailsubject-obj_name = 'TEST'.
lt_mailsubject-obj_langu = sy-langu.
lt_mailsubject-obj_descr = 'Biometric INET Time Correction Upload Program Exception <001>'.
lt_mailtxt = 'Biometric INET Time Correction Upload Program. Missing parameters in ZIBHR_PARAMS table Please contact SAP IT HR Team for further action'.
APPEND lt_mailtxt.
ELSEIF ERRORCODE = '2'.
lt_mailsubject-obj_name = 'TEST'.
lt_mailsubject-obj_langu = sy-langu.
lt_mailsubject-obj_descr = 'Biometric INET Time Correction Program Exception <002>'.
lt_mailtxt = 'Biometric INET Time Correction Upload Program. Program did not find any file to upload in the directory.'.
APPEND lt_mailtxt.
ENDIF.
Mail Contents
IF t_error_ind EQ 'Y'.
lt_mailtxt = 'Please note that some errors have been encountered while loading the records. Please check error log for further details'.
APPEND lt_mailtxt.
ENDIF.
Send Mail
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
EXPORTING
document_data = lt_mailsubject
TABLES
object_content = lt_mailtxt
receivers = lt_mailrecipients
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc EQ 0.
COMMIT WORK.
Push mail out from SAP outbox
SUBMIT rsconn01 WITH mode = 'INT' AND RETURN.
ENDIF.
refresh lt_mailtxt.
ENDFORM. "MAIL
Edited by: sheetal Gulati on Mar 8, 2010 5:22 AM -
Updated to ios 7 cannot get mail the connection server failed
I updated to ios 7 yesterday and today I keep getting "cannot get mail the connection server failed". Also the safari gets stuck or takes awhile to load the page
Was there ever a response/solution to this? There's plenty of occasions where this seems to have happened but this thread is exactly what's happening to me. I am currently in Spain and trying to use Yahoo mail.
My mail is updating occasionally but if i try to force an update i get "cannot get mail...the connection to the server failed". Also if i try to send and email i get "a copy has been placed in your outbox....the connection to the outgoing server apple.smtp.mail.yahoo.com failed...additional servers can....."
I checked my mail settings and the defined server isn't prefixed with "apple". -
Configure Synchronization Connections An error has occurred while accessing the SQL Server database
Hi,
i am getting following error message
Central Administration --> Synchronization Connections
An error has occurred while accessing the SQL Server database or the SharePoint Server Search service.
If this is the first time you have seen this message, try again later. If this problem persists, contact your administrator.
Central Administration --> Manage Profile Service: User Profile Service Application --> Manage User Properties
Error
An unexpected error has occurred.
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: 3bce5a11-f2dc-4788
Please tell how to fix it.
iffiEvent ID 5555 -> i have change the Timer jobs recycling time AM to PM
for User profile page not display number of count in the page first check services , connection ,
IISRESET /NOFORCE / timer services restart
Deepesh Yevle MCTS -
Hi All,
I am getting error "Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 500"
in one of my Test Environment when trying to run the SSRS 2012 report from report manager.
Any clue why it is happening.
Thanks Shiven:) If Answer is Helpful, Please VoteHi All,
Upon investigation found that there was no space (0 Byte is available) in E drive where underlying SQL DB is residing.
Once I cleared the space, report started working and above error was not displaying.
Thanks Shiven:) If Answer is Helpful, Please Vote -
When I run the report on production I got the following error message:
Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the
request on the server. The status code returned from the server was: 12019
It hasn’t happen on Dev and Test before.
I googled, The error is described as:
12019 ERROR_INTERNET_INCORRECT_HANDLE_STATE
The requested operation cannot be carried out because the
handle supplied is not in the correct state.
But I cannot find the solution for that.
Has it happend to you before? How to solve that?Same behaviour here, Sharepoint 2013 with SSRS in integrated mode
Error: Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status
code returned from the server was: 12019 -
Error Message " An error occured while running the detection " Sharepoint 2010 & Project Server 2010
i am trying to Update the Service Pack of sharepoint & Project
Server (SP2) . i got an error while running the Package " An error occured while running the detection " ... I searched a bit and ran ROISCAN.vbs script which is by provided by MS to identify any issues ... i Found that few MSI files of sharepoint
are missing from WINDOWS Installer folder.... My Question is Should i repair the Sharepoint or any tool that i can use to get the MSI ?There is a MS internal tool for fixing this issue but for this may be you need to contact MS, refer to below links:
Utility Name: OPUtil.vbs
http://social.technet.microsoft.com/Forums/en-US/a7919b10-e4fe-4911-9016-bb6b81cf4194/sharepoint-patch-update-issue
http://blogs.technet.com/b/paulpaa/archive/2010/03/26/sharepoint-2007-hotfix-failed-with-an-error-the-detection-failed-this-can-be-due-to-a-corrupted-installation.aspx
Please ensure that you mark a question as Answered once you receive a satisfactory response. -
Error: An error occurred while preparing the query in openquery on ServiceNow ODBC Link Server
Hi Team,
Greetings of the Day!!!!!
I have a created a link server on SQL Server 2008 R2 databse of Service Now ODBC driver. And written a stored procedure using openquery to get the data from link server.
Now problem is that, when i have scheduled that stored procedure in sql jobs. When this job runs automatically then we are getting below error while when i start the job mannually then it's not giving error.
An error occurred while preparing the query "..........."
Please help me to resolve this issue.
Regards,
Brijendra PandeyHi Fanny,
I had reviewed the job history. I am getting below message where as table is exist in the database.
Message
Executed as user: NT AUTHORITY\SYSTEM. OLE DB provider "MSDASQL" for linked server "SNOWDSN" returned message "[DataDirect][ODBC OpenAccess SDK driver][OpenAccess SDK SQL Engine]Base table:incident not found.[10129]". [SQLSTATE 01000] (Message 7412) OLE
DB provider "MSDASQL" for linked server "SNOWDSN" returned message "[DataDirect][ODBC OpenAccess SDK driver][OpenAccess SDK SQL Engine]Base table:sysapproval_approver not found.[10129]". [SQLSTATE 01000] (Message 7412) OLE DB provider "MSDASQL" for linked
server "SNOWDSN" returned message "[DataDirect][ODBC OpenAccess SDK driver][OpenAccess SDK SQL Engine]Base table:problem not found.[10129]". [SQLSTATE 01000] (Message 7412). The step succeeded.
Regards,
Brijendra Pandey
Maybe you are looking for
-
Keep getting not delivered message when I send a text
I keep getting a not delivered message when I send a text. The message actually does send but still very annoying. This started when I did the update. Any one have any fix ideas
-
I am having trouble reinstalling itunes, I do have a pc with Quick times windows XP and I get error code 2330. I had uninstalled apple support file
-
Only a few of my contacts transfer from pc to ipod via itunes
Hey, Suddenly when I do the ipod sync I only get about 20 contacts, out of about 1000. All the contacts are present in the windows address book. The only thing I am doing differently is using Zindus which syncs all my pc's (Thunderbird) address books
-
InvocationException on debugger side but no exception thrown in debuggee
Hi Folks, in my current project we develop a debugger-like tool. In the tools workflow we call a method of the debuggee via "invokeMethod()" which triggers the debuggee vm to load a class via "loadClass()". When we try to load a class which extends a
-
what are the various transformations supported in ODI?