An error occurred while installing file Flash9D.ocx.

Depending on where I get the download from, either
Flash9D.ocx or Download.dll gives me the error - "Cannot copy file
to destination directory." What is the destination directory?
Vitals:Win XP Pro, IE 6.0, IE Security - Medium

On XP Flash ocx installs to this folder:
C:\WINDOWS\system32\Macromed\Flash
So you do need write access to that folder during the
installation.
But that might not be the problem. Give us some more complete
steps describing what you're doing and how it fails..

Similar Messages

Upgrading to osx 10.6.8 fails. I see errors in the /var/log/install.log of "An unexpected error occurred while moving files to the final destination." Underlying Error=(Error Domain=NSPOSIXErrorDomain Code=5 "The operation couldn't be completed. Input/out

upgrading to osx 10.6.8 fails. I see errors in the /var/log/install.log of "An unexpected error occurred while moving files to the final destination." Underlying Error=(Error Domain=NSPOSIXErrorDomain Code=5 "The operation couldn’t be completed. Input/out. Any thoughts on what is causing these errors and the upgrade failure?
Thanks

I have no idea what the specific error code means but input/output errors can sometimes mean a disk is failing. Make a couple of backups of all important data before doing anything else.
Verify your startup disk using the First Aid tab in Disk Utility. If the disk needs repair boot from your Leopard DVD and repair your disk from Disk Utility under Utilities on the screen after you choose your language. Repeat the repair process until Disk Utility reports all is well.
If Disk Utility doesn't find any errors you might want to try a new download of the update and keep a sharp eye on your HD for anything else that might indicate all is not well. Take special care to back up important data.
If Disk Utility finds errors it would probably be a good idea to pay a visit to the Apple Store to have them check out your hard drive even if Disk Utility is able to repair the errors.

I have MacBook Pro 13-inch with retina early 2013 can I install windows on it because I tried but an error appear ( an error occurred while copying files)

I have MacBook Pro 13-inch with retina early 2013 can I install windows on it because I tried but an error appear ( an error occurred while copying files)

If you are on Yosemite, and have a CoreStorage volume (the default), it is not visible on the Windows side. The Apple HFS driver cannot read CS volumes.
You can verify this by running the following command in OSX Terminal.
diskutil cs list
If you get any output, such volumes will not be visible.
As a work around, if you really need it, check the 'Revertible' value. If it is yes, you can revert it to HFS+ by using the following command
diskutil cs revert
Here is the syntax for the command. The LVUUID parameter can be seen as a long string for your Logical Volume. Do not use the Logical Volume Group or any disk UUIDs. If you need the exact command, please post the output from the diskutil cs list command?
diskutil cs revert
Usage: diskutil coreStorage revert
MountPoint|DiskIdentifier|DeviceNode|lvUUID
[-stdinpassphrase | -passphrase [passphrase] | -recoverykeychain file]
Convert a CoreStorage logical volume back to its native type.
The file system must be mounted and resizable (i.e. Journaled HFS+).
Ownership of the affected disk and a passphrase (if encrypted) is required.

TF255424: An error occurred while installing SharePoint Products. (SharePoint 2012)

I want to install both SQL Server and Team Foundation Server on the same machine. Operating system of my server machine is Microsoft Windows Server 2008 R2 Service Pack 1. I first install Microsoft SQL Sever 2012 Enterprise edition without any error. After
that i tried to install Microsoft Team Foundation Server 2012. Team Foundation Server configuration got complete. Microsoft SharePoint Foundation 2010 installed successfully but while configuring SharePoint extension i am getting the following error.
"TF255424: An error occurred while installing SharePoint Products. For more information, open Event Viewer and review the application log. You might need to manually install Windows SharePoint Foundation 2010."
Please help.
[Info @12:19:36.259]
[Info @12:19:36.259] +-+-+-+-+-| Environment |+-+-+-+-+-
[Info @12:19:36.260] Environment: FullEnvironment
Setup:
InstallPath: C:\Program Files\Microsoft Team Foundation Server 11.0\
IsTfsExpress: False
ToolsPath: C:\Program Files\Microsoft Team Foundation Server 11.0\Tools
ApplicationTierPath: C:\Program Files\Microsoft Team Foundation Server 11.0\Application Tier
BuildTierPath: C:\Program Files\Microsoft Team Foundation Server 11.0\Tools
ProxyPath: C:\Program Files\Microsoft Team Foundation Server 11.0\Version Control Proxy
SetupUser: ETS-WEBAPP\tfsadmin
WebServicePath: C:\Program Files\Microsoft Team Foundation Server 11.0\Application Tier\Web Services
LicenseEdition: PID_RANGE_VL
SystemTfsTemp: C:\Windows\Temp\TFSTemp
SharePointInstallTemp: C:\Windows\Temp\TFSTemp\WSSInstall
InstalledLanguages: System.Collections.Generic.List`1[System.Int32]
InstalledLanguagesString: 1033;
OS:
MachineName: ETS-WEBAPP
HostName: ETS-WEBAPP
IsClientOS: False
IsServerOS: True
IsDomainController: False
IsMachineInWorkgroup: False
IsMachineInDomain: True
IsHomeEdition: False
IsUnsupportedEdition: False
Version: Server2008R2
MajorVersion: 6
MinorVersion: 1
ProcessorCount: 4
ServicePackMajor: 1
ServicePackMinor: 0
IsOSPostTfsRelease: False
VisibleMemoryMB: 12287
AdjustedMemoryGB: 12
Iis:
IsInstalled: True
PreviouslyFailedConfig: False
RequiredIisFeaturesInstalled: True
OS:
MachineName: ETS-WEBAPP
HostName: ETS-WEBAPP
IsClientOS: False
IsServerOS: True
IsDomainController: False
IsMachineInWorkgroup: False
IsMachineInDomain: True
IsHomeEdition: False
IsUnsupportedEdition: False
Version: Server2008R2
MajorVersion: 6
MinorVersion: 1
ProcessorCount: 4
ServicePackMajor: 1
ServicePackMinor: 0
IsOSPostTfsRelease: False
VisibleMemoryMB: 12287
AdjustedMemoryGB: 12
Sql:
SqlInstance 0:
Name: MSSQLSERVER
FullName: ETS-WEBAPP
Edition: Enterprise Edition
Version: 11.0.2100.60
IsWow64: False
LCID: 1033
IsExpressEdition: False
IsFullEdition: True
IsSupported: True
IsSharePointSupported: False
IsUpgradable: False
WindowsServiceName: MSSQLSERVER
SharePoint:
IsInstalled: True
IsProvisioned: False
IsAdminDbConfigured: False
IsAdminSiteConfigured: False
IsRunningSiteOnWebAppPort: False
Version: 14.0.6029.1000
WssAdminUrl: http://ets-webapp:17012/
WssSiteUrl: http://ets-webapp/sites
ReportingServices:
IsInstalled: True
DefaultInstance:
InstanceIdentifier: ETS-WEBAPP
HostName: ETS-WEBAPP
InstanceName: MSSQLSERVER
ReportServerInstance: Microsoft.TeamFoundation.Admin.ReportServerInstance
IsConfigured: True
ReportWebServiceUris[0]: http://ETS-WEBAPP:80/ReportServer
ReportManagerUris[0]: http://ETS-WEBAPP:80/Reports
Instances[0]:
InstanceIdentifier: ETS-WEBAPP
HostName: ETS-WEBAPP
InstanceName: MSSQLSERVER
ReportServerInstance: Microsoft.TeamFoundation.Admin.ReportServerInstance
IsConfigured: True
ReportWebServiceUris[0]: http://ETS-WEBAPP:80/ReportServer
ReportManagerUris[0]: http://ETS-WEBAPP:80/Reports
PowerTools:
IsBackupToolConfigured: False
[Info @12:19:36.260]
[Info @12:19:36.260] +-+-+-+-+-| Configuration Plan |+-+-+-+-+-
[Info @12:19:36.260] - ContainerTask (ContainerNode) : root
- ConditionalTask (ConditionalNode) : Provisioning SharePoint
- ContainerTask (ProgressNode) : Configure SharePoint
- ConfigureSharepointProvision (ConfigureNode, 208) : Configuring the SharePoint Products
SqlInstance = ETS-WEBAPP
AdminSiteAccountName = Domain\tfsuser
PasswordSupplied = *****
SiteUrl = http://ets-webapp/
AdminPort = 17012
TfsServiceAccount = Domain\tfsuser
- ContainerTask (ProgressNode) : Extending SharePoint
- ConfigureSharepointUploadData (ConfigureNode, 209) : Uploading solutions and templates ...
- ConfigureResetSPTimer (ConfigureNode, 214) : Resetting Sharepoint Timer Service ...
- ConfigureIisReset (ConfigureNode, 801) : Resetting IIS ...
- ConfigureMarkFeature (ConfigureNode, 140) : Marking feature configured status
FeatureType = SharePointExtensions
IsConfigured = True
- ConfigureWssHealthCheck (ConfigureNode, 210) : Check if sharepoint is responsive
SiteUrl = http://ets-webapp/
- ConditionalTask (ConditionalNode) : SharepointEntries
- ContainerTask (ProgressNode) : Configuring Services
- ConfigureAddSharePointEntries (ConfigureNode, 207) : Configuring SharePoint application entries
SharepointRootUri = http://ets-webapp
SharepointAdminUri = http://ets-webapp:17012/
DefaultSharePointPath = sites
ApplicationTierUri = http://ets-webapp:8080/tfs
ApplicationTierServiceAccount = NT AUTHORITY\NETWORK SERVICE
- ConfigureAddAccountToLocalWss (ConfigureNode, 800) : Add account to WSS farm admin group
Account = NT AUTHORITY\NETWORK SERVICE
AdminUrl = http://ets-webapp:17012/
UseRetainedSettings = False
[Info @12:19:36.260]
[Info @12:19:36.260] +-+-+-+-+-| Running root: root |+-+-+-+-+-
[Info @12:19:36.260]
[Info @12:19:36.260] +-+-+-+-+-| root |+-+-+-+-+-
[Info @12:19:36.260] Starting Node: CONTAINER
[Info @12:19:36.261] NodePath : Container
[Info @12:19:36.261] Node returned: Ignore
[Info @12:19:36.261] Completed root: Ignore
[Info @12:19:36.261] -----------------------------------------------------
[Info @12:19:36.261]
[Info @12:19:36.261] +-+-+-+-+-| Running Provisioning SharePoint: Provisioning SharePoint |+-+-+-+-+-
[Info @12:19:36.261]
[Info @12:19:36.261] +-+-+-+-+-| Provisioning SharePoint |+-+-+-+-+-
[Info @12:19:36.261] Starting Node: CONDITION
[Info @12:19:36.261] NodePath : Container/Conditional
[Info @12:19:36.261] Node returned: Ignore
[Info @12:19:36.261] Completed Provisioning SharePoint: Ignore
[Info @12:19:36.261] -----------------------------------------------------
[Info @12:19:36.262]
[Info @12:19:36.262] +-+-+-+-+-| Running Configure SharePoint: Configure SharePoint |+-+-+-+-+-
[Info @12:19:36.262]
[Info @12:19:36.262] +-+-+-+-+-| Configure SharePoint |+-+-+-+-+-
[Info @12:19:36.262] Starting Node: CONTAINER
[Info @12:19:36.262] NodePath : Container/Conditional/Progress
[Info @12:19:36.262] Node returned: Ignore
[Info @12:19:36.262] Completed Configure SharePoint: Ignore
[Info @12:19:36.262] -----------------------------------------------------
[Info @12:19:36.262]
[Info @12:19:36.262] +-+-+-+-+-| Running ConfigSPProvision: Configuring the SharePoint Products |+-+-+-+-+-
[Info @12:19:36.263]
[Info @12:19:36.263] +-+-+-+-+-| Configuring the SharePoint Products |+-+-+-+-+-
[Info @12:19:36.263] Starting Node: CSPPROVISION
[Info @12:19:36.263] NodePath : Container/Conditional/Progress/CSPPROVISION
[Info @12:19:36.263]
[Info @12:19:36.263] +-+-+-+-+-| SharepointProvision::ConfigureDatabase |+-+-+-+-+-
[Info @12:19:36.263] Configuring the SharePoint Products database ...
[Info @12:19:36.263] SharePoint Products::ConfigureDatabase
[Info @12:19:36.263] GrantLogOnAsAService is called. User name: tfsuser [Info @12:19:36.269] Checking if Authenticated Users group is a member of Users group.
[Info @12:19:36.272] sid = S-1-5-4
[Info @12:19:36.272] sid = S-1-5-11
[Info @12:19:36.272] sid = S-1-5-21-1481031050-1694664162-2121907377-513
[Info @12:19:36.272] sid = S-1-5-21-1529747324-2324938602-2105273467-1015
[Info @12:19:36.272] Authenticated Users group is a member of Users group.
[Info @12:19:36.300] C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\bin\stsadm.exe
[Info @12:19:36.300] -o setconfigdb
[Info @12:19:36.300] -databaseserver ETS-WEBAPP
[Info @12:19:36.300] -farmuser domain\tfsuser
[Info @12:19:36.300] -farmpassword ********
[Info @12:19:36.300] Process starting: fileName=C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\bin\stsadm.exe arguments=-o setconfigdb -databaseserver ETS-WEBAPP -farmuser domain\tfsuser -farmpassword ****************
[Info @12:20:04.869] Process finished: fileName=C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\bin\stsadm.exe arguments=-o setconfigdb -databaseserver ETS-WEBAPP -farmuser domain\tfsuser -farmpassword **************** exitCode=-1
in 28566 ms
[Info @12:20:04.869]
[Info @12:20:04.869] WARNING: SharePoint no longer customizes Integrated Authentication security settings. This Web application may be using Kerberos, which can require manual configuration. See "http://support.microsoft.com/?id=832769" for
more information.
[Info @12:20:04.869]
[Error @12:20:04.869] An error occurred while getting information about the user tfsuser at server telenor.com.pk: Access is denied
[Error @12:20:04.869]
[Info @12:20:04.869] ReturnCode=-1
[Info @12:20:04.874] Node returned: Error
[Error @12:20:04.874] TF255424: An error occurred while installing SharePoint Products. For more information, open Event Viewer and review the application log. You might need to manually install Windows SharePoint Foundation 2010.
[Info @12:20:04.874] Completed ConfigSPProvision: Error
[Info @12:20:04.874] -----------------------------------------------------
[Info @12:20:04.880] Execution results:
[Info @12:20:04.880] Overall result: Failure
[Info @12:20:04.880] Nodes completed: 1
[Info @12:20:04.880] Nodes succeeded: 0
[Info @12:20:04.880] Nodes skipped: 0
[Info @12:20:04.880] Nodes with errors: 1
[Info @12:20:04.880] Nodes with warnings: 0
[Info @12:20:04.880] Number of error messages: 1
[Info @12:20:04.880] Number of warning messages: 0
[Info @12:20:04.880] Number of info messages: 0
[Error @12:20:04.881] Activity failed.
[Info @12:20:04.881] Configuration failed. Unconfiguring.
[Info @12:20:04.885] Setting the IsConfigured flag for feature SharePointExtensions to False.
awias

looks like here is the your problem "An error occurred while getting information about the user moss.service
at server telenor.com.pk: Access is denied"
try to add the user into the managed account via powershell. the user you trying to configure it.
or change the user to some body else here is culprit account "telenorpk\moss.service"
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Unable to complete backup. An error occurred while copying files to backup

I erased and restarted my time capsule numerous times and tried re backing up. Little more then have way through i get this message "Unable to complete backup. An error occurred while copying files to the backup volume." With about 80gb left out of 198. On the apple support page ALL it says is ".Restart, then try the backup once again" Here is the link http://support.apple.com/kb/HT3275#3 ....PLEASE Help Me .. What Do I do.. I have read almost every topic and article regarding this ERROR 11 and found nothing and i tried i think all all..The new snow leopard comes out tomorrow so im going to install that and try again.. also if this does not ever work is there a way just to store all my music and photos in the tc and restart my whole computer the archive my files from there ??
All Your Help Will Be Greatly appreciated as i tried to do the research on my own.. This is my last resort
THAN YOU
RAM
Torrance Los Angeles Ca.

Hi there!
I am having exactly the same problem. I have experienced this before, I reset TC and it worked again, but it is not working now. Have you installed Snow Leopard? Did it solve the issue?
Thanks,
Adriano
Malaysia

"An error occurred while extracting files from the package "BaseSystem.pkg".

Hello!
I have a
MacBookPro5,5
Prozessortyp:Intel Core 2 Duo
Prozessorgeschwindigkeit:2.26 GHz
Anzahl der Prozessoren:1
Gesamtzahl der Kerne:2
L2-Cache:3 MB
Speicher:2 GB
Busgeschwindigkeit:1.07 GHz
Boot-ROM-Version:MBP55.00AC.B03
SMC-Version (System):1.47f2
Hardware-UUID:A2DD27C4-9829-5A4D-854B-485EF8A6B20F
Problem:
I upgraded Leopard to Snow Leopard. Everything worked fine for a month. To free up disk space I deleted some of the iPhoto flders (modfied and original images). Everything worked still fine. Shut down the computer. Next day it was incredibly slow. At the same time the indexing was running. I stopped indexing, but stll slow. Every operation took minutes. I tried all the tricks that I found in the internet (repaired file permissions, repaired disk, cleared PRAM , moved big filed from desktop, etc.). After 24 full hours of trying all this I decided to erase the hard drive and reinstall, directly from the Snow Leopard Install disk, but it fails after downloading the packages. Below is the part of the log. Then I tried to use the old Leopard install DVD to reinstall Leopard, it then sais estimated time 12 hours or so and eventually crashed, spitting out a lot of "reportcrash" in the log. What is going on? I'm running out of options. Any advice? Would zeroing the hard drive help? If nothing else I plan to buy a new hard drive, since the only explanation I have is that there is a problem with the hard driven although the disk utility says it is OK. I need a bigger one anyway. Any ideas? Thank you!
Aug 16 05:17:31 localhost OSInstaller[139]: IFPKInstallElement (191 packages)
Aug 16 05:17:35 localhost OSInstaller[139]: PackageKit: ----- Begin install -----
Aug 16 05:17:35 localhost OSInstaller[139]: PackageKit: request=PKInstallRequest <191 packages, destination=/Volumes/Macintosh HD>
Aug 16 05:17:36 localhost OSInstaller[139]: PackageKit: Extracting /Volumes/Macintosh HD/Mac OS X Install Data/BaseSystem.pkg (destination=/Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root, uid=0)
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/DataPool.c:116 : Error: finished pool without filling it
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/commonUtils.c: 315: Error: fh_pread -1
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:236: Error: write failed for /Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root//System/Library/Frameworks/OpenCL.framework/Versi ons/A/Resources/runtime.amdil.bc: Invalid argument
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:260: Error: futimes failed for /Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root//System/Library/Frameworks/OpenCL.framework/Versi ons/A/Resources/runtime.amdil.bc: Invalid argument
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:829: Error: returning errno 22 from FinishStreamCompressorQueue
Aug 16 05:32:10 localhost OSInstaller[139]: PackageKit: Install Failed: PKG: extracting "com.apple.pkg.BaseSystem"\nError Domain=PKInstallErrorDomain Code=110 UserInfo=0x12c8366a0 "An error occurred while extracting files from the package “BaseSystem.pkg”." Underlying Error=(Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 "The operation couldn’t be completed. FinishStreamCompressorQueue error") {\n NSFilePath = "/Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root";\n NSLocalizedDescription = "An error occurred while extracting files from the package \U201cBaseSystem.pkg\U201d.";\n NSURL = "BaseSystem.pkg -- file://localhost/Volumes/Macintosh%20HD/Mac%20OS%20X%20Install%20Data/index.pro duct";\n NSUnderlyingError = "Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 \"The operation couldn\U2019t be completed. FinishStreamCompressorQueue error\"";\n PKInstallPackageIdentifier = "com.apple.pkg.BaseSystem";\n}
Aug 16 05:32:10 localhost OSInstaller[139]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=110 UserInfo=0x12c8366a0 "An error occurred while extracting files from the package “BaseSystem.pkg”." Underlying Error=(Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 "The operation couldn’t be completed. FinishStreamCompressorQueue error")
Aug 16 05:32:11 localhost OSInstaller[139]: Install failed: Die Installation ist aufgrund eines Fehlers fehlgeschlagen. Wenden Sie sich an den Hersteller der Software.
Aug 16 05:32:13 localhost OSInstaller[139]: Allowing machine sleep.
Aug 16 05:32:15 localhost OSInstaller[139]: Memory statistics for 'Installation ist fehlgeschlagen' pane:
Aug 16 05:32:15 localhost OSInstaller[139]: Physical Memory Allocation: 139 MB wired, 259 MB trapped, 397 MB active, 7 MB inactive, 1246 MB free, 1650 MB usable, 2048 MB total

It sounds to me like your Internal Hard Drive is failing.
I recommend you buy a new one, that is a good candidate for replacing the old one, but install it in an External enclosure and Install a fresh Mac OS X on it from the DVD. You can boot your Mac from any attached drive.
The new System can be used to get some work done, check your emails, and takes the pressure off resolving this immediately. You can also attempt to salvage files off the old drive if needed.
Once things seem to be working, then move the new drive inside the computer. Failures at this point may be due to bad cable, which has been a problem in some of these MacBooks.
Use security erase, write Zeroes, one pass, to re-write every block on the old drive. Any block discovered to be bad will be replaced with spares the drive holds in reserve for this purpose. If more than 10 blocks are pared on one pass, "Initialization Failed!" will be the result. Although you can try the erase again, there is some question whether you want to trust this drive with your precious data.

An error occurred while copying files.

I am backing up a MacBook Pro Retina display to a 3TB TC and six days ago the backups just stopped and I get the following message:
Time Machine couldn't complete the backup to Time Capsule.
An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk.
I looked at the log in Time Machine Buddy and it shows the following:
Starting automatic backup
Attempting to mount network destination URL: afp://Max%20Evjen;AUTH=SRP@Endor._afpovertcp._tcp.local./Data
Mounted network destination at mount point: /Volumes/Data using URL: afp://Max%20Evjen;AUTH=SRP@Endor._afpovertcp._tcp.local./Data
Disk image /Volumes/Data/Max’s MacBook Pro.sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to /dev/disk5s2: /Volumes/Time Machine Backups/Backups.backupdb
Deep event scan at path:/Users/HippieMBAMA/Pictures/iPhoto Library/Database/apdb reason:contains changes|must scan subdirs|fsevent|missed reservation|file event|
Running event scan
Finished scan
Not using file event preflight for Macintosh HD
Found 3060 files (1.13 GB) needing backup
zero date not marked for delete: /Volumes/Time Machine Backups/Backups.backupdb/Max’s MacBook Pro/2015-02-20-171344
3.37 GB required (including padding), 1.52 TB available
Stopping backup.
Error: (-43) SrcErr:NO Copying /Users/HippieMBAMA/Library/Mail/V2/[email protected]/[Gmail].mbox/All Mail.mbox/86E53377-3EAB-46ED-ADF7-46E0C68CD404/Data/2/6/2/Attachments/262783 to /Volumes/Time Machine Backups/Backups.backupdb/Max’s MacBook Pro/2015-02-26-140223.inProgress/A4533EFE-AAE4-4EDD-A542-1BDD6672E951/Macintosh HD/Users/HippieMBAMA/Library/Mail/V2/[email protected]/[Gmail].mbox/All Mail.mbox/86E53377-3EAB-46ED-ADF7-46E0C68CD404/Data/2/6/2/Attachments
Copied 1358 items (15.1 MB) from volume Macintosh HD. Linked 25141.
Copy stage failed with error:11
Backup failed with error 11: 11
Ejected Time Machine disk image: /Volumes/Data/Max’s MacBook Pro.sparsebundle
Ejected Time Machine network volume.
I tried going back to the gmail settings to ensure the trash settings were set to SHOW and SHOW IN IMAP, and I unchecked "Store deleted messages on the server" for the gmail account in the mail.app, as I was also getting messages about not being able to move messages to trash(null), and I thought that might be the issue, but while that fixed the mail issue, it did not fix the Time Machine issue.
Any help with this would be greatly appreciated.

The TC in and of itself is running ok.. otherwise you would not have internet.. so the issue is the OS in the computer.. however the combo is worse than the sum of the parts.. ie Somehow TC is less reliable with Yosemite than it would otherwise be..
here is the normal fix list.. but it is far from foolproof.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
5. Mount the TC disk in the computer manually.
In Finder, Go, Connect to server from the top menu,
Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
You might need to do some more work on the laptop itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
Tell us how you go.
Someone posted a solution.. See this thread.
Macbook can't find Time Capsule anymore
Start from the bottom and work up.. I have a list of good network practice changes but I have avoided Yosemites bug heaven.
This user has had success and a few others as well.
RáNdÓm GéÉzÁ
Yosemite has serious DNS bug in the networking application.. here is the lets say more arcane method of fixing it by doing a network transplant from mavericks.
http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

I am running Windows 7 and trying to update to iTunes version 10.5 (from version 10.3.1.55) and I keep getting the following error message, 'Error occurred while installing the updates. If the problem persists, choose Tools Download Only and try instal

I am running Windows 7 home edition and trying to update to iTunes version 10.5 (from version 10.3.1.55) and I keep getting the following error message, ‘Error occurred while installing the updates. If the problem persists, choose Tools > Download Only and try installing manually’ which I do only to have the same error message pop up.

Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

Trying to update iTunes and I get the error - "errors occured while installing the updates. If the problem persists, choose Tools Download only and try installing manually". Currently on version 10.5.3.3 trying to update to 11.0.2 on a Windows 7 64-bit

Trying to update iTunes and I get the error - "errors occured while installing the updates. If the problem persists, choose Tools > Download only and try installing manually". Currently on version 10.5.3.3 trying to update to 11.0.2 on a Windows 7 64-bit.

Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

Move to new computer, get "An error occurred while reading files or writing files to disc. The disc

I tried to move my PE6 install and catalog to a new computer. It was on a Dell Windows XP machine, and I moved it to a Toshiba Windows 7 (64 bit) machine. I have always kept my photo files on an external hard drive. My photo library is 50GB, 10,000 files. Here is what I did.
Copied the original PE6 install file to the Toshiba. Installed but didn’t activate it.
Copied the entire My Catalog folder to the proper Windows 7 location.
Plugged the external drive into the Toshiba. Made sure the same drive letter as before (E).
Fired up PE6 on Toshiba. Looked good in Organizer. Everything seemed to be there, but I didn't try to make changes at that point.
Deactivated PE6 on the Dell. Activated on the Toshiba.
Then I realized that it is not right. I can edit Keywords and Rating stars on the pics, but not dates, captions or notes. I get “An error occurred while reading files or writing files to disc. The disc may be full or there may be problems with the source media.”
Only a fraction of the external drive is in use.
I can access the files on the external drive with another app (Windows Photo Viewer).
I tried Reconnect All Missing Files. Somewhat ambiguously, it says “There are no files to reconnect.”
In the properties in the Organizer for each picture are the proper file names and paths. Folder view works fine in Organizer.
I can put new files in the same external drive directories, import them into PE6, then edit them normally.
What is the easiest way to get Organizer properly connected to my files? I suppose I could reimport all the pics on the new machine, but I assume I'd lose some of my metadata. So that is out of the question.
Thanks,
Bill

Are you sure that file paths are correct? I say this because under XP they would have originally pointed to Documents & Settings/My Pictures whereas on W7 it will be User/Pictures, albeit you are using an external hd.
Take a look at this knowledge base note on the correct procedure for back-up and restore.
I think writing metadata to files for such a large catalog will be a thankless task.
http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html

"An error occurred while installing Adobe AIR"

I am running Vista Home Premium SP1, and I keep getting the
following error while trying to reinstall Air. After the install, I
get a dialog box telling me Air installed successfully. When I
click OK, I get a second box telling me: "An error occurred while
installing Adobe AIR. Installation may not be allowed by your
administrator. Please contact
your administrator."
This error has repeated itself time after time. Air had
installed fine a while back, but programs using it began having
problems with uprgrades, so I uninstalled them and uninstalled Air,
then tried to reinstall Air.
Here's the .airinstall.log file from the last install
attempt:
Performing runtime install
UI SWF load is complete
UI initialized
starting user confirmation
Installation type: new
starting elevated install
subinstaller: starting install
subinstaller: Scheduling runtime installation operations
subinstaller: Installed Product GUID: is same:false
subinstaller: Beginning runtime installation
subinstaller: Beginning install
subinstaller: Installing
c:\users\me\appdata\local\temp\air7233.tmp\setup.msi
subinstaller: Execution complete; beginning commit phase
subinstaller: Commit complete
subinstaller: install complete
Elevated install completed
subinstaller: begin quitting
Elevated install failed (3001)
runtime install entering error state: [ErrorEvent
type="error" bubbles=false cancelable=false eventPhase=2
text="Error #3001" errorID=3001]
begin quitting
Any idea what's wrong?
Thanks

I am also getting an error. I first noticed it when trying to
install the jott express application. I then tried installing Adobe
air 1.1 standalone.
Both logs are attached.
Jott Log
Starting app install of
http://jott.com/jottexpress/jx.air
UI SWF load is complete
UI initialized
Unpackaging to
C:\WINDOWS\system32\config\systemprofile\TEMP\fla1DD.tmp
unpackaging is complete
application is bound to side-by-side version 1.0
application is bound to this version of the runtime
app id JottExpress
pub id 50E28EE2422BD0599F081C2408B1BFDDBEFC6B6B.1
application not currently installed
Waiting for user confirmation
User confirmed action: install
creating native installer in:
C:\WINDOWS\system32\config\systemprofile\TEMP\fla1DE.tmp
native installer creation complete
Starting install
Destination for installed application is d:\Program Files
Installed Product GUID: is same:false
Scheduling uninstall of product guid
{BB8B979E-E336-47E7-96BC-1031C1B94561}
Beginning install
Installing
C:\WINDOWS\system32\config\SYSTEM~1\TEMP\AIR1D6.tmp\setup.msi
Uninstalling product w/ GUID
{BB8B979E-E336-47E7-96BC-1031C1B94561}
Error occurred; beginning rollback: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
Rolling back install of
C:\WINDOWS\system32\config\SYSTEM~1\TEMP\AIR1D6.tmp\setup.msi
Rollback due to error complete
stateInstalling: [ErrorEvent type="error" bubbles=false
cancelable=false eventPhase=2 text="1612" errorID=0]
starting cleanup of temporary files
application installer exiting
Air Log
erforming runtime install
UI SWF load is complete
UI initialized
starting user confirmation
Installation type: additionalNewest
starting install
Scheduling runtime installation operations
Installed Product GUID: is same:false
Scheduling uninstall of product guid
{BB8B979E-E336-47E7-96BC-1031C1B94561}
Beginning runtime installation
Beginning install
Installing
c:\windows\system32\config\system~1\temp\air1f1.tmp\setup.msi
Uninstalling product w/ GUID
{BB8B979E-E336-47E7-96BC-1031C1B94561}
Error occurred; beginning rollback: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
Rolling back install of
c:\windows\system32\config\system~1\temp\air1f1.tmp\setup.msi
Rollback due to error complete
error during install: [ErrorEvent type="error" bubbles=false
cancelable=false eventPhase=2 text="1612" errorID=0]
runtime install entering error state: [ErrorEvent
type="error" bubbles=false cancelable=false eventPhase=2
text="1612" errorID=0]
begin quitting
updater called with args:C:\Program Files\Common Files\Adobe
AIR\Versions\1.0.6\Adobe AIR Updater.exe,-installupdatecheck

Can't Install. An error occurred while installing Adobe AIR

I can't install Adobe AIR. I'm getting the infamous error:
"An error occurred while installing Adobe AIR. Installation may not be allowed by your administrator. Please contact your administrator."
I'm the administrator of the computer.
I'm running Windows 7 Ultimate 32-bit.
I've tried the right-click-run-as-administrator solution and I'm getting the same error.
I've read Troubleshoot AIR installation | Windows and none of the solutions worked.
I'm installing the latest AIR version (I've tried older versions too)
I've tried Microsoft Install and Uninstall Fix It and AIR doesn't appear on the list of programs.
Here is my install log:
[2012-04-13:11:31:20] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
[2012-04-13:11:31:20] Commandline is:
[2012-04-13:11:31:20] No installed runtime detected
[2012-04-13:11:31:42] Relaunching with elevation
[2012-04-13:11:31:42] Launching subprocess with commandline c:\users\mmazza\appdata\local\temp\aira62d.tmp\adobe air installer.exe -ei
[2012-04-13:11:31:42] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
[2012-04-13:11:31:42] Commandline is: -stdio \\.\pipe\AIR_5604_0 -ei
[2012-04-13:11:31:42] No installed runtime detected
[2012-04-13:11:31:43] Starting silent runtime install. Installing runtime version 3.2.0.2070
[2012-04-13:11:31:43] Installing msi at c:\users\mmazza\appdata\local\temp\aira62d.tmp\setup.msi with guid {47FA2C44-D148-4DBC-AF60-B91934AA4842}
[2012-04-13:11:31:45] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2012-04-13:11:31:45] Rolling back install of c:\users\mmazza\appdata\local\temp\aira62d.tmp\setup.msi
[2012-04-13:11:31:45] Rollback complete
[2012-04-13:11:31:45] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2012-04-13:11:31:45] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2012-04-13:11:31:45] Runtime Installer end with exit code 7
[2012-04-13:11:31:47] Runtime Installer end with exit code 7
Hope someone can help. Thanks.

Chris, thanks for your help. Here's the log:
=== Logging started: 4/16/2012 11:16:05 ===
Action start 11:16:05: INSTALL.
Action start 11:16:05: FindRelatedProducts.
Action ended 11:16:05: FindRelatedProducts. Return value 1.
Action start 11:16:05: ValidateProductID.
Action ended 11:16:05: ValidateProductID. Return value 1.
Action start 11:16:05: SetSHAREDADDINFOLDER.
Action ended 11:16:05: SetSHAREDADDINFOLDER. Return value 1.
Action start 11:16:05: CostInitialize.
Action ended 11:16:05: CostInitialize. Return value 1.
Action start 11:16:05: FileCost.
Action ended 11:16:05: FileCost. Return value 1.
Action start 11:16:05: CostFinalize.
Action ended 11:16:06: CostFinalize. Return value 1.
Action start 11:16:06: MigrateFeatureStates.
Action ended 11:16:06: MigrateFeatureStates. Return value 0.
Action start 11:16:06: InstallValidate.
Action ended 11:16:06: InstallValidate. Return value 1.
Action start 11:16:06: SetARPINSTALLLOCATION.
Action ended 11:16:06: SetARPINSTALLLOCATION. Return value 1.
Action start 11:16:06: InstallInitialize.
Action ended 11:16:07: InstallInitialize. Return value 1.
Action start 11:16:07: ProcessComponents.
Action ended 11:16:07: ProcessComponents. Return value 1.
Action start 11:16:07: UnpublishFeatures.
Action ended 11:16:07: UnpublishFeatures. Return value 1.
Action start 11:16:07: RemoveRegistryValues.
Action ended 11:16:07: RemoveRegistryValues. Return value 1.
Action start 11:16:07: RemoveDuplicateFiles.
Action ended 11:16:07: RemoveDuplicateFiles. Return value 1.
Action start 11:16:07: RemoveFiles.
Action ended 11:16:07: RemoveFiles. Return value 0.
Action start 11:16:07: InstallFiles.
Action ended 11:16:07: InstallFiles. Return value 1.
Action start 11:16:07: DuplicateFiles.
Action ended 11:16:07: DuplicateFiles. Return value 1.
Action start 11:16:07: WriteRegistryValues.
Action ended 11:16:07: WriteRegistryValues. Return value 1.
Action start 11:16:07: RegisterUser.
Action ended 11:16:07: RegisterUser. Return value 1.
Action start 11:16:07: RegisterProduct.
Action ended 11:16:07: RegisterProduct. Return value 1.
Action start 11:16:07: PublishFeatures.
Action ended 11:16:07: PublishFeatures. Return value 1.
Action start 11:16:07: PublishProduct.
Action ended 11:16:07: PublishProduct. Return value 1.
Action start 11:16:07: InstallExecute.
MSI (s) (EC:04) [11:16:09:069]: Product: Adobe AIR -- Error 1402. Could not open key: HKEY_LOCAL_MACHINE\SOFTWARE\Classes\.air\OpenWithProgids. System error 5. Verify that you have sufficient access to that key, or contact your support personnel.
Error 1402. Could not open key: HKEY_LOCAL_MACHINE\SOFTWARE\Classes\.air\OpenWithProgids. System error 5. Verify that you have sufficient access to that key, or contact your support personnel.
Action ended 11:16:09: InstallExecute. Return value 3.
Action ended 11:16:10: INSTALL. Return value 3.
Property(S): ARPINSTALLLOCATION = c:\Program Files\Common Files\Adobe AIR\
Property(S): SHAREDADDINFOLDER = c:\Program Files\Adobe\Flash Player\AddIns\airappinstaller\
Property(S): UpgradeCode = {8DA920D5-C41C-42E0-BF31-87BA49984EE4}
Property(S): UC8DA920D5C41C42E0BF3187BA49984EE4 = {FDB3B167-F4FA-461D-976F-286304A57B2A}
Property(S): Resources = c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\
Property(S): Version = c:\Program Files\Common Files\Adobe AIR\Versions\1.0\
Property(S): Versions = c:\Program Files\Common Files\Adobe AIR\Versions\
Property(S): AIR = c:\Program Files\Common Files\Adobe AIR\
Property(S): CommonFilesFolder = c:\Program Files\Common Files\
Property(S): TARGETDIR = c:\
Property(S): SourceDir = c:\users\mmazza\appdata\local\temp\air5438.tmp\
Property(S): Manufacturer = Adobe Systems Incorporated
Property(S): ProductCode = {47FA2C44-D148-4DBC-AF60-B91934AA4842}
Property(S): ProductLanguage = 1033
Property(S): ProductName = Adobe AIR
Property(S): ProductVersion = 3.2.0.2070
Property(S): REINSTALLMODE = amus
Property(S): ARPSYSTEMCOMPONENT = yes
Property(S): REBOOT = Suppress
Property(S): ALLUSERS = 1
Property(S): SecureCustomProperties = ARPSYSTEMCOMPONENT;REINSTALLMODE;SHAREDADDINFOLDER;UC8DA920D5C41C42E0BF3187BA49984EE4
Property(S): MsiLogFileLocation = C:\Users\mmazza\AppData\Local\Temp\MSI46b03.LOG
Property(S): PackageCode = {496CC99A-E905-4C30-B3F0-14CB137CACAC}
Property(S): ProductState = -1
Property(S): PackagecodeChanging = 1
Property(S): CURRENTDIRECTORY = C:\Users\mmazza\Downloads
Property(S): CLIENTUILEVEL = 3
Property(S): MSICLIENTUSESEXTERNALUI = 1
Property(S): CLIENTPROCESSID = 1156
Property(S): VersionDatabase = 200
Property(S): VersionMsi = 5.00
Property(S): VersionNT = 601
Property(S): WindowsBuild = 7600
Property(S): ServicePackLevel = 0
Property(S): ServicePackLevelMinor = 0
Property(S): MsiNTProductType = 1
Property(S): WindowsFolder = c:\Windows\
Property(S): WindowsVolume = c:\
Property(S): SystemFolder = C:\Windows\system32\
Property(S): System16Folder = C:\Windows\system\
Property(S): RemoteAdminTS = 1
Property(S): TempFolder = C:\Users\mmazza\AppData\Local\Temp\
Property(S): ProgramFilesFolder = C:\Program Files\
Property(S): AppDataFolder = C:\Users\mmazza\AppData\Roaming\
Property(S): FavoritesFolder = C:\Users\mmazza\Favorites\
Property(S): NetHoodFolder = C:\Users\mmazza\AppData\Roaming\Microsoft\Windows\Network Shortcuts\
Property(S): PersonalFolder = C:\Users\mmazza\Documents\
Property(S): PrintHoodFolder = C:\Users\mmazza\AppData\Roaming\Microsoft\Windows\Printer Shortcuts\
Property(S): RecentFolder = C:\Users\mmazza\AppData\Roaming\Microsoft\Windows\Recent\
Property(S): SendToFolder = C:\Users\mmazza\AppData\Roaming\Microsoft\Windows\SendTo\
Property(S): TemplateFolder = C:\ProgramData\Microsoft\Windows\Templates\
Property(S): CommonAppDataFolder = C:\ProgramData\
Property(S): LocalAppDataFolder = C:\Users\mmazza\AppData\Local\
Property(S): MyPicturesFolder = C:\Users\mmazza\Pictures\
Property(S): AdminToolsFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\
Property(S): StartupFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\
Property(S): ProgramMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
Property(S): StartMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\
Property(S): DesktopFolder = C:\Users\Public\Desktop\
Property(S): FontsFolder = C:\Windows\Fonts\
Property(S): GPTSupport = 1
Property(S): OLEAdvtSupport = 1
Property(S): ShellAdvtSupport = 1
Property(S): Intel = 6
Property(S): PhysicalMemory = 3325
Property(S): VirtualMemory = 4304
Property(S): AdminUser = 1
Property(S): MsiTrueAdminUser = 1
Property(S): LogonUser = mmazza
Property(S): UserSID = S-1-5-21-823518204-1563985344-842925246-12804
Property(S): UserLanguageID = 1033
Property(S): ComputerName = RGPROWS1015
Property(S): SystemLanguageID = 1033
Property(S): ScreenX = 1024
Property(S): ScreenY = 768
Property(S): CaptionHeight = 22
Property(S): BorderTop = 1
Property(S): BorderSide = 1
Property(S): TextHeight = 16
Property(S): TextInternalLeading = 3
Property(S): ColorBits = 32
Property(S): TTCSupport = 1
Property(S): Time = 11:16:10
Property(S): Date = 4/16/2012
Property(S): MsiNetAssemblySupport = 4.0.30319.1
Property(S): MsiWin32AssemblySupport = 6.1.7600.16385
Property(S): RedirectedDllSupport = 2
Property(S): MsiRunningElevated = 1
Property(S): Privileged = 1
Property(S): USERNAME = d
Property(S): DATABASE = c:\Windows\Installer\446fe3.msi
Property(S): OriginalDatabase = c:\users\mmazza\appdata\local\temp\air5438.tmp\setup.msi
Property(S): UILevel = 2
Property(S): ACTION = INSTALL
Property(S): ROOTDRIVE = c:\
Property(S): CostingComplete = 1
Property(S): OutOfDiskSpace = 0
Property(S): OutOfNoRbDiskSpace = 0
Property(S): PrimaryVolumeSpaceAvailable = 0
Property(S): PrimaryVolumeSpaceRequired = 0
Property(S): PrimaryVolumeSpaceRemaining = 0
Property(S): INSTALLLEVEL = 1
Property(S): SOURCEDIR = c:\users\mmazza\appdata\local\temp\air5438.tmp\
Property(S): SourcedirProduct = {47FA2C44-D148-4DBC-AF60-B91934AA4842}
Property(S): ProductToBeRegistered = 1
MSI (s) (EC:04) [11:16:10:707]: Product: Adobe AIR -- Installation failed.
MSI (s) (EC:04) [11:16:10:720]: Windows Installer installed the product. Product Name: Adobe AIR. Product Version: 3.2.0.2070. Product Language: 1033. Manufacturer: Adobe Systems Incorporated. Installation success or error status: 1603.
=== Logging stopped: 4/16/2012 11:16:10 ===
I've tried to delete the HKEY_LOCAL_MACHINE\SOFTWARE\Classes\.air\OpenWithProgids key, but I got the message "Cannot delete. Error while deleting key"

Error occured while installing updates for itunes 10.6.1

I have been having issues lately trying to install my updates to iTunes. I keep getting an error message that says "Error occurred while installing the updates. If the problem persists, choose Tools > Download Only and try installing manually." This happened on the last update as well, and the install manually didn't work. I eventually had to uninstall iTunes and reinstall the latest version. But, if I keep doing this, I have to re-add all of my music folders, and recreate all of my playlists for every single update that comes out. That means like once a week. Does anyone know why I keep getting this message?
I have submitted a screenshot if that helps.
Also, I am running windows 7 on my computer. Thank you

Hmmm. I was wondering if it was an issue with a broken setupadmin.exe mucking up the works (because it's a tiny little file). But it's apparently the itunes64.msi causing us grief.
Plausibly, we might be looking at a disk/file damage thing that is preventing the msis and so forth from saving correctly. If so, running a disk check (chkdsk) over your C:\ Drive might help.
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Error Message: An error occurred while reading files or writing files to disc...

Why am I getting the following error: An error occured while reading files or writing files to disc. The disc may be full or there may be a problem with the source media. I am running PSE10 on a iMac using OS X 10.7.3, my Mac has a 1TB hardrive of which about 150GB is used. I get this error when trying to delete a file out of the Organizer. The software worked fine until I installed it on my laptop, also a Mac, and tried to share files.

Hmm. What happens if you disable sharing, just as a test?
I don't think you can share organizer photos that way, since your versions don't really exist as images, just as a set of directions to organizer for recreate that state of your editing when needed, and you can't run organizer on a network drive, which is pretty much what you're trying to do if you mean you have PSE installed on the other computer and are tryng to use the same catalog for both.

Hi this message appears after 2 hours downloading Mavericks : an error occurred while extracting files from the package "mzps4135638417199433253.pkg"

Hi this message appears after 2 hours downloading Mavericks in App Store :
an error occurred while extracting files from the package "mzps4135638417199433253.pkg"
Same with "CMD + R"
Help...

It sounds to me like your Internal Hard Drive is failing.
I recommend you buy a new one, that is a good candidate for replacing the old one, but install it in an External enclosure and Install a fresh Mac OS X on it from the DVD. You can boot your Mac from any attached drive.
The new System can be used to get some work done, check your emails, and takes the pressure off resolving this immediately. You can also attempt to salvage files off the old drive if needed.
Once things seem to be working, then move the new drive inside the computer. Failures at this point may be due to bad cable, which has been a problem in some of these MacBooks.
Use security erase, write Zeroes, one pass, to re-write every block on the old drive. Any block discovered to be bad will be replaced with spares the drive holds in reserve for this purpose. If more than 10 blocks are pared on one pass, "Initialization Failed!" will be the result. Although you can try the erase again, there is some question whether you want to trust this drive with your precious data.

An error occurred while installing file Flash9D.ocx.

Similar Messages

Maybe you are looking for