An error occurred while saving. Alert window

Recently, whenever I select text and copy it (command C) in nearly any program (ex.: Browswer windows, Apple Mail, even a file name in Finder), I get a pop-up window with "An error occurred while saving." The yellow triangle with "!" and a pair of binoculars show in the window. I've just run Diskwarrior and have also used Apple's Disk Utility to repair permissions as a precaution.
What's going on?

OK, I think we're on the trail...
So, you have Chronos Notes v6.5.4?
I'd be tempted Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then to move these files to the Desktop...
/Users/YourUserName/Library/Preferences/com.chronos.SOHOOrganizer.plist
/Users/YourUserName/Library/Preferences/com.chronos.SOHONotes.plist”
/Users/YourUserName/Library/Preferences/com.chronos.ChronosNotesService.plist
Maybe just this last one for a try!?
Reboot... we can always move them back & reboot if we need to.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
http://support.chronosnet.com/customerservice/kb_cat.php?s=49cbbb1e4a685b3ad7573 9d5153651fd&id=13&t=qanda

Similar Messages

Error occured while saving the user account information

I'm trying to install LiveCycle ES 2 with PDF Generator on a Windows 2008 server wtih SQL Server 2005. When I run the configuration manager I get an error in the step where you add the administrator user credentials for generator. The error I'm receiving is ALC-PDG-080-032-Error occured while saving the user account information. Has anyone seen this issue before? Any ideas on what the problem may be?

Going back some time, another user (do not recall Matrox on the system) had a similar issue. The workaround in that case was to use Save_As and just increment the file name. Now, I do not recall any real "fix," and for another user, the Save_As resulted in the same behavior, so it was not a universal workaround.
Good luck, and please report your findings,
Hunt

Error occured while Saving The Project

I have a project that is giving me a 'unknown error occurred while saving the project. Select 'Save As' from the file menu and save the project to a new location'.
It would seem that maybe it's saying that it's out of room but I'm saving on a harddisk that has over 1T of space left. I tried to do as they said and create another folder and save in a new location but it gives me the same error.
Has anyone dealt with this.? I have a wedding project that I can't make any changes to. It was doing this before and after I updated to Adobe 4.2.
Using:
Adobe Premiere Cs4
Matrox RXT2
6 Rams of memory
4T system
Windows Vista 64 Bit
Nividia GEForce 9600

Going back some time, another user (do not recall Matrox on the system) had a similar issue. The workaround in that case was to use Save_As and just increment the file name. Now, I do not recall any real "fix," and for another user, the Save_As resulted in the same behavior, so it was not a universal workaround.
Good luck, and please report your findings,
Hunt

Error occurred while saving document in Web Analysis Studio

We have encountered an issue when we tried to save a new report in Web Analysis. An error message box will prompt up displaying "Error occurred while saving document." (Please refer to the attached screenshots). Clicking the details button gives no response.
Originally we encountered this whilst creating a report with an SQL spreadsheet (JDBC connection tested successfully), which failed to save. Proceeding to test this saving a blank report also gave the same error message.
The report shows up in the Oracle view, however also produces an error when trying to open it. "Unable to perform request
Undefined exception encountered. Recommended Action: Contact your corporate technical support." (Please refer to the attached screenshots)
Web Analysis version 11.1.2.3.000.1175
Please advise on how to handle this case

Hi Soumya,
Thanks for your reply. I am already using the admin account which is given administrator provisioning under Reporting & Analysis. I have not had issues in the past of saving documents to the server location (e.g. with FR studio). Any ideas as to what else could cause this error? Thanks!

Error occured while saving ume properties

Hi All,
We have installed SAP ERP 6.0 SR3 central instance(ABAP+JAVA)
I logged into Enterprise Portal using J2EE_ADMIN user.
I am trying to change properties in System Administration --> System configuration --> UME Configuration --> ABAP System.
I changed properties then i clicked on 'Saved All changes' button. I am getting following error.
"An error occured while saving UME Properties. contact your system administrator'
I want solution to move forward.
Regards,
Phanikumar.

Hi Phanikumar.
Please check whether J2EE_ADMIN is having super administrator role in portal or not.
If you have assigned system administration role directly then it might be the case.
You can try with config tool if still you are getting the problem in the portal
Hope it helps
Regards
Arun

An error occurred: Save document failed / An error occurred while saving the document: PATH (HDB 00055)

Hello Colleagues, I am creating an analysis in build 576, everything goes well, the algorithm calculates the needed values, but when I try to save the analysis, I receive the following error message: "An error occurred: Save document failed / An error occurred while saving the document: <PATH> (HDB 00055)".
Does anyone know what could cause this error message?
Thanks a lot for any hint.
Sergey

Hi Henry,
I am using PA 1.0.11 and received this error; any update on this fix for SAP PA. Does this happen for a particular data source.
I am currently using Excel as source and whenever I try to use this data; I get this even if I move the data to a new file or rename a file. I tried to check the same issue with a different file and it works fine. This file worked fine a day back.
Please let me know if this is unusual for this version.
Regards,
Arvind E

I am trying to create a community addition, but just keep getting *Error occurred while saving your data.

I am trying to create a community addition, but just keep getting *Error occurred while saving your data.
Trying to add the following community addtion for: http://technet.microsoft.com/en-us/library/cc755631(v=ws.10).aspx
In the above website do NOT copy the command, you have to type it in. Webpage Error.
You can use both dsquery server –hasfsmo schema and dsquery server -forest –hasfsmo schema
The problem is, I believe, a hidden character in the command on this webpage which follows the Paste function and results in the error Unknown Parameter error.

Hi John,
You might have better luck posting this in the library feedback forum here:
http://social.msdn.microsoft.com/Forums/en-us/home?forum=libraryfeedback&filter=alltypes&sort=lastpostdesc
It seems odd to me that the TechNet library feedback forum lives under the MSDN branding, but that seems to be the case.
Don't retire TechNet! -
(Don't give up yet - 12,575+ strong and growing)

An error occurred while saving the following file

I want to build an app but I get this message:
An error occurred while saving the following file:
C:\Acquire U6 DS&FTP\Acquire U6 DS&FTP.vi
Nothing more, absolutely nothing more.
Before that I could build it without problems, now I can't. The file in the message is the main file (by the way it runs fine). I've tried creting a new project but it doesn't work.
I really hope somebody can help me.
Thanks,
JuanM

What's changed in your code? Have you tried undoing anything or reverting back to a pervious version?
Reese, (former CLAD, future CLD)
Some people call me the Space Cowboy!
Some call me the gangster of love.
Some people call me MoReese!
...I'm right here baby, right here, right here, right here at home

Windows Server Essentials error occurred while configuring on Windows Server 2012 R2 Standard

am attempting to install the Windows Server Essentials on a new domain controller in a new domain and forest. I go to add roles and features and select essentials. The config wizard says it is Updating and Preparing the Server and
That is all the information that you need to provide. Your server is being prepared for use and may restart more than once. This may take up to 30 minutes.
It goes to 3% and the encounters an error saying An error occurred while configuring Windows Server Essentials. Please try again. I don't seem to find anything in the log to indicate why it fails.

Hi boe_d,
Based on your description, did you mean that this error was occurred in process of installing the Windows Server
Essentials Experience Role on Windows Server 2012 R2 Standard? If I misunderstand, please don’t hesitate to let me know.
If it is, have you re-tried the role installation? Please check if still go to 3% and then get the same error
message.
In addition, please add
ServerAdmin$ account to the Logon as a service Group Policy, and then monitor the result. For more details, please refer to the following article.
You may be unable to run post-deployment configuration wizard after you install the Windows Server Essentials
Experience role
http://blogs.technet.com/b/sbs/archive/2013/12/04/you-may-be-unable-to-run-post-deployment-configuration-wizard-after-you-install-the-windows-server-essentials-experience-role.aspx
If this issue still exists, please navigate to: %windir%\Logs\CBS folder and check the CBS log file if you
can find any error that depend on the Essentials Experience Role setup time.
Hope this helps.
Best regards,
Justin Gu

Error Occurred while saving the purchase order

Dear Experts,
While changing PO and Schedule Agreement using T.Code : ME22, ME32 we are facing below error message.
Problem occurred While altering and saving the purchase order.
Error message FGV004 - "SYST:date 00.00.0000 is not permitted" is generated
when modifying an Scheduling Agreement that does not have a Delivery
Schedule using ME32L.
Please Kindly help to fix this error as soon as possible.
Thanks in Advance.
Prasath Manoharan

hi,
In addition to above..
I also checked for the SAP note...
It shows only one note regarding MM...
pls check the sap note 355827..
As per this note you need to add few corrections...pls take help of basis consultant..
Regards
Priyanka.P

Error occurred while saving SAP Lumira 1.15.1 document

Hi All,
I got error while saving document in SAP Lumira 1.15.1(Error Desc. : you do not have permission to save the document to its current location). and also occurred while sharing on cloud. Below fig.1 shows while saving and fig 2.shows error while sharing on cloud.
Currently I am using SAP lumira 1.15.1. Build 879
fig 1.
fig 2.

Hi,
I faced the same situation while trying to save the document. Since i dint get any valid resolution, i just restarted the Lumira, and now i could save the documents.
Restarts helps most of the times though it is not recommendable.
As someone said earlier, it has something to do with Session corruption.
Lumira Version : 1.15.1
Regards,
Sahana

Kernel data error occuring while installation of windows 10

i have downloaded windows 10 but during its installation my laptop's screen turn blue and shows "kernel data inpage error" and says that laptop needs a restart...and when my laptop restarts its shows no reboot device found and no operating system is found in your hardrive....then i have to press my laptops power button and shut it down and then again turn on my laptop.....three times i have tried installing windows 10 and each time this error has occured........please someone answer me that what is this kernel inpage error?....what is this reboot device?....and what should i do to fix this problem?

Hi,
While doing a fresh install of Windows server 2012 R2 on a machine I am getting error as
"Windows could not update the computer's boot configuration. Installation cannot proceed."
I have even tried to delete all the partitions and then tried to do the installation but similar error pop up after complete installation.
Even I tried to run bootrec with /fixmbr /fixboot but still no resort.
Any thoughts how to fix the issue.
Thanks in advance.
you need a fairly modern rig with lots of RAM to run Server 2012 R2
Corsair Carbide 300R with window
Corsair TX850V2 12V1 70A
Asus M5A99FX PRO R2.0 CFX/SLI
AMD Phenom II 965 C3 Black Edition @ 4.0 GHz
G.SKILL RipjawsX DDR3-2133 8 GB
EVGA GTX 660 Ti FTW Signature
Asus PA238QR IPS LED HDMI DP 1080p
ST2000DM001 & Windows 8.1 x64 Professional
LG WH14NS40 14X Blu-Ray Writer BDXL 128GB
Microsoft Wireless Desktop 2000
Wacom Bamboo CHT470M

Unknown error occured while saving CS2

I'm using Windows Xp with Service pack 1.
I have Ilustrator CS2. When I save, an error message pops up saying "An unknown error has occured." Then after that if I try to change something in the illustration, it says "Not enough RAM memory," which makes no sense. The program has worked for me when I had a different download;I don't know where I got it from but it's gone and it was a Trial version--When I opened that one, I had to go to Windows > Color, Tools, etc. because it had no windows up. Anyway. I don't think it's a printer issue. And I have no idea how to delete or move the preferences/settings. When I click the CS2 folder, it doesn't say Settings ANYWHERE. I've seen people suggest that but no one says how to do it. They just expect you to know for some reason. This really gets my goat and it just doesn't make any sense.

Preferences > Plug Ins & Scratch Disks ( you can select up to 4 sources or drives starting with your startup drive ). You found Web Settings, but what you want is Illustrator Preferences ( should be found in a source file titled Preferences on you C Drive ). You may or may not have to delete the Preferences file which will automatically be rebuilt at default settings upon restart. Your RAM requiremnts may be as low as 256mb, but that is just a starting put. You need enough RAM to run your operating system and peripherals, as well as other apps you want open the same time you have Illustrator open. Deleting the Illustrator Prefertences file may not be necessary in your case. Setup the scratch disks first.

Getting a "An error occurred while saving values to the app.config file." message

The content of the title is just part of the message I get. The second line of the message is: "The file might be corrupted or contain invalid XML."
I work with a lot of usercontrol libraries, and each one has 1 or 2 connection strings setup, and nothing else. I have no trouble in the code itself using the settings. Nor do I have trouble during runtime with them. But I do have the problem with every single library I work on.
The problem occurs when I make a change to the settings in the VS IDE (2005), which I do whenever I need to the connection string to point to my test SQL server, or need to set it back to the production SQL server. The connection strings were setup in the Settings tab of the Property page for the application.
I get the error message whenever I select the settings tab and again when I go to save it. I once tried deleting the app.config file, and recreating the settings, and the message went away until I checked it in. No one else has the problem when they get the files, but when I get then, I get the error message.
Any ideas what may be causing this. My boss thouight it might be an addon from CodeSMART, but I uninstalled it to see if the errors would go away and it didn't.
Thanks.
MarshallMarshall Youngblood

Marshall,
I am not sure if it helps in your case, but I have the similar problem. Add foloowing lines in your app.config file in configSections tag.
<
configSections>
<
sectionGroup name="applicationSettings" type="System.Configuration.ApplicationSettingsGroup, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" >
<
section name="ApLibrary.My.MySettings" type="System.Configuration.ClientSettingsSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
</
sectionGroup>
</
configSections>
let me know if that helps.
Purvi Patel

Error occured while saving trade promotion if a control message is given

Hi all,
While creating a trade promotion, we want to control the products and if there is/are not available for our criteria, we want to give an error message and stop the application. I put this control message in the BADI ( EXEC_METHODCALL_PPF -> method : EXECUTE ) that generates a form for the event. In GUI there is no problem, it gives the error message and stops. But in PCUI if this message is given, error page appears like that :
Message E SPPF_MEDIA 052 cannot be processed in plugin mode HTTP
Class -> CX_SY_MESSAGE_IN_PLUGIN_MODE
Program -> CL_CRM_BSP_FRAME_MAIN ==...CP
ABAP Class -> CL_CRM_BSP_FRAME_MAIN
Method -> DO_REQUEST
thanks,

Preferences > Plug Ins & Scratch Disks ( you can select up to 4 sources or drives starting with your startup drive ). You found Web Settings, but what you want is Illustrator Preferences ( should be found in a source file titled Preferences on you C Drive ). You may or may not have to delete the Preferences file which will automatically be rebuilt at default settings upon restart. Your RAM requiremnts may be as low as 256mb, but that is just a starting put. You need enough RAM to run your operating system and peripherals, as well as other apps you want open the same time you have Illustrator open. Deleting the Illustrator Prefertences file may not be necessary in your case. Setup the scratch disks first.

An error occurred while saving. Alert window

Similar Messages

Maybe you are looking for