An error occurred while sending mail. The mail server responded: Administrative prohibition. Please check the message and try again.
An error occurred while sending mail. The mail server responded: Administrative prohibition. Please check the message and try again.
Somtimes it says it spam also......
The error message is being generated by your email provider's server. Best to ask them what they do not like about your messages and how to solve the problem.
Similar Messages
-
Hi.
I read the posting regarding the options on Hotsyncing for Windows 7; however, I have some questions as I have a 64-bit system.
I have a Visor Pro that I'm trying to Sync up with my new laptop which is running Windows 7.
Steps I have taken:
* installed the Visor Palm Desktop 3.0.1 that came with the Visor (which the installation went well)
* The issue arises when I push the "Sync" button on the cradle and the following error message appears "The connection between your handheld computer and the destktop could not be established. Please check your setup and try again."
Since I have a 64-bit OS it appears that I have 2 options: 1) bluetooth or 2) Infrared.
I have to admit I don't know know how to do either of these (how can I tell if this Handspring Visor Pro has bluetooth (which I don't it does)?).
Then how about the Infrared option? I see on the PDA it has a red area that one can "beam" info. Is this the same as Infrared or my 2nd option?
I love my Visor and want to continue using it, but need to backup the valuable info!
Any help with this would be greatly appreciated!
THANKS!!!!!
Post relates to: Visor ProHello lwalbring and welcome to the Palm forums.
Your Visor, as you suspect, does not have Bluetooth, so you must use the IR HotSync option. Since you are using Windows 7 64-bit, I believe that you are going to have to upgrade to Palm Desktop 6.2.2 to make things work from an OS/Driver perspective.
Since you are using such an old device, you are also going to have to download and install the PalmHotSyncSetup Utility from Pimlico. This update turns on support for old Palm OS PDAs in Palm Desktop 6.2.2. Without the update, you won't be able to sync your Visor with Palm Desktop 6.2.2. The software is free and the link is all the way at the bottom of the screen.
Lastly, if your PC doesn't have an IR port on it, you will need to purchase a USB to IR adapter. Some laptops still have IR ports and most desktops don't.
Once you have all the pieces, you'll want to go back to the Windows 7 and Vista HotSync thread again, and follow the directions for setting up and configuring IR HotSyncs.
Alan G -
Trouble updating to iOS 5 on my wife's iPhone 4 connected to our iM, right before download finishes downloading iTunes comes back with the error message Software corrupted during download. Please check network settings and try again later, however there was no problem updating my iPhone to iOS 5 through iTunes connceted to my dell laptop on the same wireless network. What gives?
Try disabling your firewall; both on your PC and the external Firewall/Router.
-
When i want to ask the guaranty status of my apple wireless keyboard, i got an error: apple keyboard We're sorry, but this serial number is not valid. Please check your information and try again.
If you purchased the iPhone from Apple or an authorized Apple reseller,
contact them for assistance. If you purchased elsewhere, go back
to that retailer and get them to give you a new iPhone or your money
back.
If you have checked the serial number carefully and re-entered it
and that gave you the same error message, contact Apple if purchased
from Apple or authorized retailer; otherwise you have been scammed
and need to pursue the matter with the business you obtained the
iPhone from. -
Face time will not connect error message "Please check network conections and Try again" message appears but I'm connected to the internet?
Hey sergioo9,
Thanks for the question. Based on what you stated, it seems like you are having trouble signing into Messages on OSX. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
FaceTime, Game Center, Messages: Troubleshooting sign in issues - Apple Support
Thanks for using Apple Support Communities.
Cheers,
Mario -
Hi,
I am running XP SP 2, on a Dell Vostro 1000, Palm OS Garnet v5.4.7 on a Tungsten E2. I have worked though issues relating to synchronization, Outlook 2007, Docs to Go, etc., in the past. Thank you board members!
Once I worked thru all the initial problems, my Tungsten E2 was sync' ing beautifully to my laptop until a few days ago. There have been no changes (I know of) to the configuration, but now I receive "The connection between your device and the desktop could not be established. Please check your setup and try again." On the laptop I sometimes get "USB device not recognized." I am unclear why I get the PC message sometimes and not others.
I have tried the following: (not necc exactly in this order)
Double checked Hot Sync Mgr settings: Local USB (ver. 6.0.1)
Reset the Palm (multiple times)
Rebooted the laptop (multiple times before and after the Palm resets)
Went to Support Libraries including http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=57,E=0000000001060189973,K=9550,Sxi=3,Case=Obj(3695...)
and http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=PalmSupportKB,ts=Palm_External2001,Case=obj(1409)
Followed the steps in "Start Here" found at http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=26057
Moved Backup directory as per a post on this forum
Looked for a deleted a file called "Graffiti_ShortCuts_____________" per a post on this forum
Followed the steps in HotSync troubleshooter guide you can run through located on
http://kb.palm.com
Went into Device Manager - found it shows no yellow ! 's
Followed Device Mgr Troubleshooter - went all the way thru with no solution
Tried all four USB ports - the PC's bell-like tone does not sound when I disconnect or reconnect the Plam's cradle like it does when I conn/disconnect other USB devices -I think that is a clue. ...?
Cleaned the Palm's contacts (and cradle's contacts with a old, dry toothbrush)
Read all the posts under "USB device not recognized."
OK, I'm at a loss, can anyone help me? Many thanks in advance!
~Bob
Post relates to: Tungsten E2Hello!
Using a cradle with the Tungsten E2? Tried bypassing the cradle and just use the hotsync cable? Tried a different computer yet? Somehow, the PC is having problems getting a signal from the device. I assume you have the laptop charger plugged into the laptop during this? Not going through a docking station or port-replicator.
One crazy thing you can try is unplug the charger from your laptop, remove the battery from the laptop and leave it out for like 10mins and put it back in and reboot the laptop. This should not cause side effects but still contact your OEM to make sure that nothing else is needed after leaving the battery out for extended period of time. Keep me posted.
Post relates to: Treo 650 (Unlocked GSM) -
I installed viber on my iPhone 5s. After entering my number, it says:"
No Service
It seems to be a problem connecting to viber's service.please check your connection and try again"
Nevertheless I have connected to the internet.
Could you please help me?Hello!
Using a cradle with the Tungsten E2? Tried bypassing the cradle and just use the hotsync cable? Tried a different computer yet? Somehow, the PC is having problems getting a signal from the device. I assume you have the laptop charger plugged into the laptop during this? Not going through a docking station or port-replicator.
One crazy thing you can try is unplug the charger from your laptop, remove the battery from the laptop and leave it out for like 10mins and put it back in and reboot the laptop. This should not cause side effects but still contact your OEM to make sure that nothing else is needed after leaving the battery out for extended period of time. Keep me posted.
Post relates to: Treo 650 (Unlocked GSM) -
You can not post a blank message. Please type your message and try again.
some additional info about the clean install, I did not Migrate any data over from a Time Machine, I started fresh. Perhaps this could be my issue. Do I need to Migrate over the User account in order to have access to my old data?
-
i am trying to executing command
"yum update"
and i am facing error during this
[Errno 14] PYCURL ERROR 7 - "couldn't connect to host"
Trying other mirror.
Error: Cannot retrieve repository metadata (repomd.xml) for repository: ol6_UEK_latest. Please verify its path and try againhere i found the "ol6_UEK_latest" in public-yumo.l6.repo.
and here is URL corresponding to this:
name=Latest Unbreakable Enterprise Kernel for Oracle Linux $releasever ($basearch)
baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/UEK/latest/$basearch/
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-oracle
gpgcheck=1
enabled=1
plz help me is something wrong with URL or what i do ? -
Have had my Tungsten E2 for 3 years...I always use cable to Hotsync, and the last few weeks it has worked only intermittently. Either the device is not recognized, or it starts the HotSync and then freezes. I have checked out various online suggestions but then discovered that the only thing that seems to work is to exit Hot Sync Manager, then restart it again each time - then Hot Sync seems to work fine - a temporary solution! I don't have Bluetooth capabilities. I can't figure out if I need a new cable, a new OS (have Vista), a new laptop (only 2 years old) or a new Palm! Any suggestions? Thanks!
Post relates to: Tungsten E2Hello!
The next time that happens, USB device not recognized error, unplug the cable from the PDA and pc, then soft reset the device, then plug the PDA back in and see wat happens.
Post relates to: Treo 650 (Unlocked GSM) -
I have tried turning off my iPad and the wifi. I don't know what else to do or try.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
Cheers, Tom -
Error Occured. Please check your settings and try again while opening a RTF
Hi,
I'm having the above error while opening a template in MS-Word to create BIP Reports. I see a lot of messages on the BIP forum with similar error. Could anyone over there help on this issue please.
Thanks
AravindCan you throw in more detail? I mean exact step step by process that you folowed.
Thanks, Naveen Gagadam. -
Processor: Intel Core i7 2.9 Ghz
Memory: 8GB 1600Mhz DDR3
HDD: 1TB (5400rpm)
Graphics: Intel HD Graphics 4000Not sure if you have tried adding 8.8.8.8 to the DNS servers yet or if your messages app is a problem as well. for me the only fix was as follows:
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/IdentityServices
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. Log out or restart the computer, empty the Trash, and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Basically drag the items in the identityservices folder to trash log out, log back in, empty trash, start messages or facetime!!
GOOD LUCK! -
Facetime error on imac, could not sign in please check network connection and try again
hi can somebody please help me solve this issue. i have downloaded facetime to my imac running snow leopard, when i log in with apple account it loads for ages then says (could not sign in. check network connection and try again). help please
Hi skenneth,
Here are some troubleshooting steps I would recommend:
FaceTime for Mac: Troubleshooting FaceTime
http://support.apple.com/kb/ts4185
Cheers!
- Ari -
REP-0177: An error occurred while running in a remote server.
I am getting the following errors while trying to run a report script. The report was created in Report Builder.
REP-0177: An error occurred while running in a remote server.
Reference parameter OT_RUN_DATE in the distribution list is invalid.
OT_RUN_DATE is a static field converting SYSDATE to a string (TO_CHAR(SYSDATE, 'YYYYMMDD')). Unfortunately, I inherited this report and did not create it. I do not know what purpose it serves but would like more insight into what the reference parameter and distribution list mean.
REP-0177: An error occurred while running in a remote server.
Too many errors pushed on the stack
I assume this is related to the first error but am not certain.
Any help is greatly appreciated...Michel,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
I have been using Thunderbird for a couple of years. On Friday 10 Apr my home email account stopped sending either new messages or replying to incoming emails. In addition I have Thunderbird get my work email and I can send and receive email just fine. I can also send email from my android phone and via the web.
The message that has started coming up is the following:
An error occurred while sending mail. The mail server responded: 5.7.1 [P4] Message blocked due to spam content in the message.. Please check the message and try again.
I have tried reinstalling Thunderbird but nothing changed, I tried changing the port from 25 to 587 to 465 but nothing changed. I do not understand what is going on as on Wednesday Apr 8 everything was working just fine.I have just tried ringing RCN and they tell me that because I am not using an RCN email as such they can not help but he suggested that it was a filter in Thunderbird but I have not set any filters and can not see if there are any or how to change them. The only way sending my website url right now is to make it not look like a url. Where do I need to look to solve this as I first wrote last week everything was fine.
Maybe you are looking for
-
Error message: the appropriate pricing procedure could not be determined
Hi SAP friends, What does this error message means please? The appropriate pricing procedure could not be determined because no entry with keys 'M100 20 P1' 'A' '1' exists in table 683V. Tcode: VA01 (sales order). Regards, Bahia.
-
Code block works in SQL Command Processor but not in application
Hello forum, Been struggling with this for a few days without success: I have a form with a popup LOV called P6_POPUP, a file browse item called P6_BROWSE, a SUBMIT button, and a Process with the following code: declare q_image_id number; begin selec
-
After update of Nightly to ver 36. appears problem with flash animation/games Downloaded (from adobe.com) and installed adobe flash player ver.15.0.0.189 appears in list of plug-ins as "Shockwave player 15.0.0.189" - and non flash animation(games) wo
-
Flashing red bar on top of iphone screen
Hi there. I was reading already a bit about the red status bar here in the forum but some of my questions remain unanswered. I understand so far - please correct me if I'm wrong - that the red status on the top of the screen is popping up sometimes f
-
Data load happening terribly slow
Hi all, I had opened up quality server and made some change(removed its compunding attribute) at definition level to an infoobject present in the InfoCube. The infoobject,IC and Update rules are all active. when i scheduled the load now ther is a hug