An error occurred while trying to set the security information, the error returned was Unspecified error (80004005)

Hi,
I am getting the following error in system center orchestrator when I assign permission to the run books.
I run the designer with my admin account. I have bounced the server and check for every possible thing I can think of and still getting this error. It was working fine a couple of weeks ago.
Has anyone seen error ?
Appreciate any help you can give me.

Hi,
If you didn't change anything before the issue, I recommand check SQL server, especially for performance issue.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

  • "An error occurred while trying to add a frame to the movie" (-2014)

    Oh c'mon. I just got everything installed. First time i try to use it, and get an error. Anyone help? I tried researchin this but didn't really get concrete answers. Plus, if i try to import livetype file unrendered from fce, fce quits unexpectedly.

    Please, any ideas? i have a intel core 2 duo, 10.6.2 macbook, and PCI graphics card. Plenty of memory. Livetype version is 1.2.1. Is this type not compatible?

  • On a Mac ios10.10, using online service Export PDF, error message appears,"An error occurred while trying to access service."

    Can you advise steps I might take now?  On a Mac ios10.10, using online service Export PDF, error message appears,"An error occurred while trying to access service."

    Hi Ringdoc,
    Please see this document: "Error occurred when trying to access this service" when logging on to Acrobat.com
    Let us know how it goes!
    Best,
    Sara

  • Sysprep - Fatal error occurred while trying to sysprep the machine

    On the 4th attempt to sysprep a Windows 7 Enterprise system, I get the dreaded, 'A fatal error occurred while trying to sysprep the machine.' 
    The setuperr.log shows:
    2010-08-04 13:57:58, Error      [0x0f0073] SYSPRP RunExternalDlls:Not running DLLs; either the machine is in an invalid state or we couldn't update the recorded state, dwRet = 31
    2010-08-04 13:57:58, Error      [0x0f00ae] SYSPRP WinMain:Hit failure while processing sysprep cleanup external providers; hr = 0x8007001f
    I've seen articles referring to the Windows Software Licensing Rearm program may have issues running more than three times in a single Windows image and to add <SkipRearm>1</SkipRearm> in the /unattend file...  but this did not help. 
    The Windows Media Player Network Sharing Service has also been disabled which is often referred to in other posts.
    The KB article: http://support.microsoft.com/kb/947212/en-us indicated that the resolution is to re-create the image for the machine... This is very frustrating. I'm hoping that there is
    a better resolution???
    How do you sysprep a machine more than three times to avoid this error?
    Thanks!! 
    930193

    I had a problem Where Runing slmgr /dlv returned 0 and could not sysprep a
    32 bit Win 7 Installed on C:drive
    Here is what I did to succeed whit Sysprep.
    Disable UAC
    Based on
    This :
    open notepad and copy paste the following:
    @ECHO OFF
    setLocal Enabledelayedexpansion
    for %%d in (c d e f g h i j k l m n o p q r s t u v w x y z) do (
      if exist %%d:\windows\system32 (
         SET drv1=%%d:\windows\system32
        reg load HKLM\MY_SYSTEM !drv1!
        reg delete HKLM\MY_SYSTEM\WPA /f
        reg unload HKLM\MY_SYSTEM
        GOTO END
    :END
    ECHO Done, Rebooting system...
    timeout 3
    wpeutil reboot
    Then in notepad chose file>save as, in File Type select "All Files", name it "c:\reset.bat"
    Reboot Your Pc, after bios screen press F8, Select "Repair Your Computer", select your keyboard layout, enter your credentials if needed,
    then select the last option "Open Command Prompt"
    type "c:\reset.bat" or "d:\reset.bat" (Sometimes Your Windows Partition get a different letter on the repair environment)
    Back on Windows follow step five if needed.
    Check under slmgr /dlv you have more than 0 under "Remaining Windows Rearm count"
    Download pstools.zip from
    here, extract content an copy psexec.exe to %windir%\System32
    run psexec.exe and accept the license agreement so it won't bother when running afterwards, close it.
    open notepad and copy paste the following:
    @ECHO OFF
    echo Stopping Windows Media Player Sharing Service..
    echo.
    net stop wmpnetworksvc
    echo.
    echo Deleting Old Sysprep Logs...
    echo.
    del /f /s /q %windir%\System32\sysprep\panther\*.*
    echo.
    echo Adding Required Sysprep Registry Keys...
    echo.
    REG ADD "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SoftwareProtectionPlatform" /v SkipRearm /t REG_DWORD /d 00000001 /f
    REG ADD HKLM\SYSTEM\Setup\Status\SysprepStatus /v GeneralizationState /t REG_DWORD /d 00000007 /f
    REG ADD HKLM\SYSTEM\Setup\Status\SysprepStatus /v CleanupState /t REG_DWORD /d 00000002 /f
    psexec -i -s REG ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\Sysprep\Cleanup /v "{EC9FE15D-99DD-4FB9-90D5-5B56E42A0F80}" /t REG_SZ /d "C:\\Windows\\System32\\iesysprep.dll,Sysprep_Cleanup_IE" /f
    psexec -i -s REG ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\Sysprep\Generalize /v "{EC9FE15D-99DD-4FB9-90D5-CE53C91AB9A1}" /t REG_SZ /d "C:\\Windows\\System32\\iesysprep.dll,Sysprep_Cleanup_IE" /f
    psexec -i -s REG ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\Sysprep\Specialize /v "{EC9FE15D-99DD-4FB9-90D5-676C338DC1DA}" /t REG_SZ /d "C:\\Windows\\System32\\iesysprep.dll,Sysprep_Cleanup_IE" /f
    echo.
    echo Uninstalling MSDTC...
    echo.
    msdtc -uninstall
    timeout 10
    echo.
    echo Reinstalling MSDTC...
    echo.
    msdtc -install
    timeout 10
    echo.
    echo Cross Your Fingers, Finally Running Sysprep...
    echo.
    %windir%\System32\sysprep\sysprep /generalize /oobe /shutdown /unattend:unattend.xml
    Change Last Line to suit your needs, ie: if you are not using an unnattend answer file, then delete /unattend:unattend.xml"
    Then in notepad chose file>save as, in File Type select "All Files", name it "%windir%\System32\do.cmd"
    if you use an unattend.xml file copy it to %windir%\System32\sysprep folder.
    Once you are ready run %windir%\System32\do.cmd
    Hope it helps,

  • An error occurred while trying to communicate with the web browser.

    I have opened a PDF in the Acrobat reader V 8.2.4. It has live links.
    Only the FF browser is open.
    When I click a link in the PDF, I successfully get the message 'The document is trying to connect to...' which I allow and then successfully hyperlink to the web page displayed in FF.
    When I click an image in the PDF, which has a url attached to it, I get the message 'An error occurred while trying to communicate with the web browser.'
    [Sorry to say in IE7 when I click the image, I hyperlink to the web page like I do when I click the link.]
    Question is: What setting or other step do I need to take with FF so when I click the image in the PDF I link to a web page like I do when I click the link in the PDF?
    Thank you!

    Your above posted system details show outdated plugin(s) with known security and stability risks.
    # Adobe Shockwave for Director Netscape plug-in, version 10.2
    # Adobe PDF Plug-In For Firefox and Netscape 8.2.4
    # Shockwave Flash 10.0 r22
    Update the [[Java]] plugin to the latest version.
    *http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/
    Update the [[Adobe Reader]] plugin to the latest version.
    *http://get.adobe.com/reader/otherversions/

  • "An error occurred while trying to save the iCloud account"

    cannot logon to my iCloud account on iPhone but have no problem logging on mac, so username+password is ok. Get the above error message.
    tried to reset all settings but did not help.
    Any ideas?

    Same situation. I installed iOS 8 beta 4 on my iPhone 5 and a few days later my iCloud account disappeared. My contacts and calendar entries are gone.
    My Mac Mini and MacBook do sync as they should with iCloud.
    When I try to log in to iCloud on the iPhone (the username shows "[email protected]" and password shows "required"), I put in my username and password and tap "Sign In", It says "Verifying" at the top and after a while checkmarks appear next to my username and password. Then I get an error message saying "An error occurred while trying to save the iCloud account". If I tap OK the message goes away, leaving my username and password intact (checkmarks are now gone). If I tap "Sign In" again I get a message saying " '[email protected]' is Already Added. This iCloud account has already been added to your iPhone". If I go back to Settings and then go into iCloud again it's not set up and appears as I stated at the beginning of this paragraph.
    Nothing works and the sync does not occur. Contacts are empty and Calendar has no entries.

  • An error occurred while trying to access the audit log

    Hi I have run Set-Mailbox ian.shapton -AuditOwner Update, Move, MoveToDeletedItems, SoftDelete, HardDelete
    I then created and deleted an email and ran Search-MailboxAuditLog -Identity "ian shapton" -LogonTypes Owner -StartDate "12/21/2014 12:00" -EndDate "12/21/2014 13:00" -ShowDetails
    I see An error occurred while trying to access the audit log. For more details, see the inner exception.
        + CategoryInfo          : NotSpecified: (:) [Search-MailboxAuditLog], AuditLogException
        + FullyQualifiedErrorId : [Server=Mailbox01,RequestId=07f17915-f25d-4fd5-b23e-f07a2482f4a4,TimeStamp=21/12/2014 16:45:39] [FailureCategory=Cmdlet-AuditLogException] 255D6156,Microsoft.Exchange.Management.SystemConfigurationTasks.SearchMailboxAuditLog
    MSExchange CmdletLogs shows Microsoft.Exchange.Data.ApplicationLogic.AuditLogServiceException: The Exchange Web Service returned an error while trying to access the audit log. Reason: 'Error','ErrorTimeoutExpired','The search operation could
    not be completed within the allotted time limit. Please try to narrow down your scope to reduce the result set.'.
    I am a Recipient Admin and Org Admin and can search other mailboxes using -LogonTypes Delegate
    Any idea what I am missing here?
    shapi

    Hi,
    I have the same problem when I run the Search-MailboxAuditLog command.  It has been working for 2 weeks but suddenly after moving databases from one datacenter to another and back again it stopped working.  The account running the command
    is in all necessary roles needed.
    This is what I have tested after it stopped working:
    - Search-MailboxAuditLog -Identity "xxxxxxx" -LogonTypes Delegate -StartDate (Get-Date).Adddays(-1) = Works
    - Search-MailboxAuditLog -Identity "xxxxxxx" -LogonTypes Delegate -StartDate (Get-Date).Adddays(-1) -showdetails = does not work and comes with an error.
    "The Exchange Web Service returned an error while trying to access the audit log. Reason: 'Error','ErrorTimeoutExpired',
    'The search operation could not be completed within the allotted time limit. 
    Please try to narrow down your scope to reduce the result set.'."
    This is very bad for us because we use a lot of shared mailboxes with delegates and want to report delegate action on these mailboxes.
    Environment:
    - 3 datacenters
    - Exchange 2013 CU7
    Thorir
    thorir

  • Concurrency Visualizer Extension (VS2013): "An unknown error occurred while trying to start the collection process."

    Not sure if this is the right place to ask about this but since my question concerns an extension I'll give it a shot.
    I'm trying to use the Visual Studio 2013 Concurrency Visualizer extension to debug a simple test console application. I've set executive paging to disabled in the registry as it directed and hit "add SDK to project" in the concurrency
    visualizer menu options. And of course, restarted my computer to apply the settings. When I try to "start [the concurrency visualizer] with current project" I get an error popup:
    "An unknown error occurred while trying to start the collection process."
    I really need the concurrency profiling to start debugging contention in my multithreaded application. Prompt assistance would be much appreciated.

    Hi,
    This forum is to discuss and ask questions about extending and integrating with Visual Studio (using the Extension Manager, building VSX containers for deployment, Visual Studio SDK, and more), Visual Studio Online (REST APIs, service hooks, and OAuth),
    and Team Foundation Server.
    You have problems when using Concurrency Visualizer Extension, please ask in
    the page under "Q AND A". Since Concurrency Visualizer is a diagnostic tool, you can post this issue in
    Visual Studio Diagnostics (Debugger, Profiler, IntelliTrace) forum too.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Content Library Explorer error -error occurred while trying to read the package metadata (can't find package in console)

    I have SCCM 2012 SP1 recently upgraded to R2. I'm currently setting this up to migrate my production 2007 site. However, I'm trying to use Content Library Explorer on my DP's. I have 3 dps. DP2 connects fine but when i try and connect to DP1 +3 i get
    the following error: An error occurred while trying to read the package metadata. The package
    PackageID is invalid and must be redistributed from the Configuration Manger console.
    Now i can't find any trace of this at all in the console. In the SMSPackagesHist table i can see the package ID and the deleted time was 29-07-2013. This most likely was me trying to create software updates back last year when i initially setup the site.
    The package is not listed as content on any of the 3 DPs and i can't find any trace of it at all in the console.
    I'm not very familiar with 2012, so not sure what I've done.
    Any help or advice appreciated.
    Thanks
    Jane

    Hi Torsten,
    thanks for this. I did a search of the WMI key and found this document: http://blogs.technet.com/b/configmgrteam/archive/2012/05/07/troubleshooting-content-mismatch-warnings-on-a-distribution-point-in-system-center-2012-configuration-manager.aspx (does
    this mean it is supported?)
    however, on those 2 DP's in that class, the suspect package ID is not listed!???
    Any more ideas?
    Many thanks
    Jane

  • An error occurred while trying to start the Windows Deployment Services server

    After rebooting the server, I cannot start the Windows Deployment Services anymore.
    It worked perfectly before the reboot. When starting it manually these errors appear in the event log:
    The Windows Deployment Services Server service terminated with service-specific error 1460 (0x5B4).
    An error occurred while trying to initialize multicast manager. Windows Deployment Services server will be shutdown.
    Error Information: 0x5B4
    An error occurred while trying to start the Windows Deployment Services server.
    Error Information: 0x5B4
    This is on server standard beta 3.

    I have removed the server from the WDS, then I have uninstalled the role, rebooted, reinstalled the role.
    When I started the WDS the server was back in there, but when I wanted to start the service I got the message "the windows deployment services configuration is corrupt". I have triggered these commands to reset this:
    Code Snippet
    wdsutil /Verbose /Progress /Uninitialize-Server
    Windows Deployment Services Management Utility [Version 6.0.6001.16510]
    Copyright (C) Microsoft Corporation. All rights reserved.
    Tearing down server...
    == Original server operational mode: Native ==
    -> Resetting setup state
    -> Disabling and resetting Windows Deployment Services services
    -> Removing server BINL SCP
    -> Removing Windows Deployment Services share at \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST
    == Final server operational mode: Not Configured ==
    The command completed successfully.
    Then i did this command, but again it failed to start at the end.
    Code Snippet
    C:\Windows\system32>wdsutil /Verbose /Progress /Initialize-Server /REMINST:"c:\R
    emoteInstall"
    Windows Deployment Services Management Utility [Version 6.0.6001.16510]
    Copyright (C) Microsoft Corporation. All rights reserved.
    Setting up server...
    -> Creating Windows Deployment Services installation tree
    ---> Creating Windows Deployment Services installation root at \\LH-AJGG6OZWH9Z4
    .longhorn.office\c$\RemoteInstall
    ---> Creating Windows Deployment Services share at \\LH-AJGG6OZWH9Z4.longhorn.of
    fice\REMINST
    ---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST\Images
    ---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST\Boot
    ---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST\Boot\x86\Images
    ---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST\Boot\ia64\Images
    ---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST\Boot\x64\Images
    ---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST\Boot\Fonts
    ---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST\Tmp
    ---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST\Mgmt
    ---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST\WdsClientUnattend
    ---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST\Templates
    -> Installing Windows Deployment Services files
    ---> Installing system files
    ---> Installing boot files for x86
    ---> Installing boot files for ia64
    ---> Installing boot files for x64
    -> Updating registry
    -> Configuring the TFTPD service
    -> Configuring BINL SCP
    Enabling Windows Deployment Services services...
    Starting Windows Deployment Services services...
    An error occurred while trying to execute the command.
    Error Code: 0x41D
    Error Description: The service did not respond to the start or control request in a timely fashion.
    Anyone have an idea what could be the cause? I found this additional error in the event log, but distributed file system hasn't been installed since the beginning.
    DFS could not access its private data from the Active Directory. Please manually check network connectivity, security access, and/or consistency of DFS information in the Active Directory. This error occurred on root REMINST.

  • ICould error, "An error occurred while trying to save the iCould account"

    Randomly, all contacts names were gone and replaced with numbers. Told to sign-in to iCould, signed it, got error "An error occurred while trying to save the iCould account"
    -Help Please

    Same situation. I installed iOS 8 beta 4 on my iPhone 5 and a few days later my iCloud account disappeared. My contacts and calendar entries are gone.
    My Mac Mini and MacBook do sync as they should with iCloud.
    When I try to log in to iCloud on the iPhone (the username shows "[email protected]" and password shows "required"), I put in my username and password and tap "Sign In", It says "Verifying" at the top and after a while checkmarks appear next to my username and password. Then I get an error message saying "An error occurred while trying to save the iCloud account". If I tap OK the message goes away, leaving my username and password intact (checkmarks are now gone). If I tap "Sign In" again I get a message saying " '[email protected]' is Already Added. This iCloud account has already been added to your iPhone". If I go back to Settings and then go into iCloud again it's not set up and appears as I stated at the beginning of this paragraph.
    Nothing works and the sync does not occur. Contacts are empty and Calendar has no entries.

  • A network error occurred while trying to communicate with the server.

    Hello All,
    I am getting some new error messages when opening the server app on my Mac Mini server running OS X 10.8.2 and Server 2.2.1. First I get a message that says "A network error occurred while trying to communicate with the server." and then after trying to open some of the service panes, I get additional errors that say "Multiple errors occurred on the server while processing commands." The services don't load and I just see "Error Reading Settings" in the server app.
    I started to get these errors when I added a new website to the server. All the services are working fine but I cannot access them in the server app.
    In console I'm seeing these errors when I try to access various services:
    2/24/13 8:02:12.692 PM Server[956]: Error: The server '10.0.1.150' reported an error while processing a command of type: 'readSettings' in plug-in: 'servermgr_dns'. Error: Error Domain=XSActionErrorDomain Code=499 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk." UserInfo=0x7f8c4003a760 {NSLocalizedDescription=The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk., originalError=Error Domain=NSURLErrorDomain Code=-1202 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk." UserInfo=0x7f8c3f547db0 {NSURLErrorFailingURLPeerTrustErrorKey=<SecTrust 0x7f8c40599080 [0x7fff7711ffd0]>, NSLocalizedRecoverySuggestion=Would you like to connect to the server anyway?, NSUnderlyingError=0x7f8c3d58c0b0 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk.", NSErrorPeerCertificateChainKey=(
        "<SecCertificate 0x7f8c3f6747e0 [0x7fff7711ffd0]>"
    ), NSLocalizedDescription=The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk., NSErrorFailingURLKey=https://10.0.1.150:311/commands/servermgr_dns, NSErrorFailingURLStringKey=https://10.0.1.150:311/commands/servermgr_dns, NSErrorClientCertificateStateKey=0}}
    I have already restarted the server and used terminal to stop and start postgres. Any more thoughts on how to repair this?

    Just as I had suspected, the whole GUI crashed because of certificate problems. After two and a half hours with enterprise support, it turns out the com.apple.servermgrd certificate in the server keychain had become corrupt.
    We determined this by typing https://127.0.0.1:311 into Safari and we could see all the server modules and interact with them through the web interface. All the services were working properly as well so we knew that it was just the Server.app GUI that simply couldn't read settings that was causing the problem.
    So, first we closed the server app. Went into /var/servermgrd and deleted all the files from this folder. Then, in Keychain, deleted the com.apple.servermgrd certificate. Did a search for com.apple.servermgrd in Keychain and deleted everything else that came up for it.
    Then restarted the server. Now the server app was able to properly connect to the services in the background and read them properly. This was the jist of the troubleshooting that solved the problem. It also seems like DNS is causing problems because that is the only service that will not read right but is functioning properly in the background.
    I will post an update once Apple figures out what is wrong with DNS. Hope this helps anybody else having these problems.

  • An error occurred while trying to access the service?

    I'm trying to convert a PDF into Excel but I get the message 'an error occurred while trying to access the service'.
    I have tried logging into my Adobe account online and doing it within there, but once I have exported the file and pressed 'convert' it simply says 'conversion failure' with no explanation.
    My subscription is still valid, so I don't see why the problems?  Has anyone else had this issue and managed to fix it?  I get the error message regardless of whether I'm trying to convert to Word or Excel.
    Any ideas greatly appreciated!!
    Thanks
    Sophie

    Hi SHurcs,
    I'm sorry that you're having such trouble with your ExportPDF subscription. Does this error occur for one particular file, or with any file that you try to convert? What operating system and browser are you using?
    To get us started, here are a few things that you can try:
    In Reader, sign out, and then sign back in.
    Use a supported web browser:  http://www.adobe.com/acom/systemreqs/
    Clear the browser cache.
    If you're using a networked computer, make sure that there are no firewall/proxy settings that prevent you from uploading files to the Internet.
    Make sure that the files you're trying to convert are within the file-size limits for ExportPDF (100 MB).
    If the problem persists, please let us know, and tell us a bit more about the files that you're converting.
    Best,
    Sara

  • An error occured while trying to access the service

    i'm continually having issues with trying to convert my files from PDF to excel.  I keep on getting the error message "An error occured while trying to access the service" with no real explanation as to what is wrong.  I've tried several times on several different computers, logging on and off, changing users...same message everytime.  I have a time sensitive project to complete, and can't get it done if this conversion can't be done.  HELP!

    Hi J,
    Here are a couple documents that may assist you:
    'Getting started' guide
    FAQ
    Let me know if those help!
    Kindest regards, Stacy

  • "The following errors occurred while trying to open this page." Why?

    Dear all,
    I'm running an online store at http://bubblething.com. I created it with iWeb 08. It crashed and I've been trying to recreate it, partly from images retreived by Apple from their "webarchive" and partly with images created fresh. I But I keep getting a dropdown error box saying "The following errors occurred while trying to open this page." Then there's a list of the missing images, and the images are all crossed out on my page. This seems to be happening unpredictably, sometimes just a few days after I've worked on the page. What's happening? Is it because somehow I've moved files, and the links to the images are broken? Please help!

    Safari > Preferences > Privacy > Cookies and website data:
    Click “Remove All Website Data” button.
    https://support.apple.com/en-us/HT203370

Maybe you are looking for