An error occurred while trying to start the Windows Deployment Services server

After rebooting the server, I cannot start the Windows Deployment Services anymore.
It worked perfectly before the reboot. When starting it manually these errors appear in the event log:
The Windows Deployment Services Server service terminated with service-specific error 1460 (0x5B4).
An error occurred while trying to initialize multicast manager. Windows Deployment Services server will be shutdown.
Error Information: 0x5B4
An error occurred while trying to start the Windows Deployment Services server.
Error Information: 0x5B4
This is on server standard beta 3.

I have removed the server from the WDS, then I have uninstalled the role, rebooted, reinstalled the role.
When I started the WDS the server was back in there, but when I wanted to start the service I got the message "the windows deployment services configuration is corrupt". I have triggered these commands to reset this:
Code Snippet
wdsutil /Verbose /Progress /Uninitialize-Server
Windows Deployment Services Management Utility [Version 6.0.6001.16510]
Copyright (C) Microsoft Corporation. All rights reserved.
Tearing down server...
== Original server operational mode: Native ==
-> Resetting setup state
-> Disabling and resetting Windows Deployment Services services
-> Removing server BINL SCP
-> Removing Windows Deployment Services share at \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST
== Final server operational mode: Not Configured ==
The command completed successfully.
Then i did this command, but again it failed to start at the end.
Code Snippet
C:\Windows\system32>wdsutil /Verbose /Progress /Initialize-Server /REMINST:"c:\R
emoteInstall"
Windows Deployment Services Management Utility [Version 6.0.6001.16510]
Copyright (C) Microsoft Corporation. All rights reserved.
Setting up server...
-> Creating Windows Deployment Services installation tree
---> Creating Windows Deployment Services installation root at \\LH-AJGG6OZWH9Z4
.longhorn.office\c$\RemoteInstall
---> Creating Windows Deployment Services share at \\LH-AJGG6OZWH9Z4.longhorn.of
fice\REMINST
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Images
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Boot
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Boot\x86\Images
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Boot\ia64\Images
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Boot\x64\Images
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Boot\Fonts
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Tmp
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Mgmt
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\WdsClientUnattend
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Templates
-> Installing Windows Deployment Services files
---> Installing system files
---> Installing boot files for x86
---> Installing boot files for ia64
---> Installing boot files for x64
-> Updating registry
-> Configuring the TFTPD service
-> Configuring BINL SCP
Enabling Windows Deployment Services services...
Starting Windows Deployment Services services...
An error occurred while trying to execute the command.
Error Code: 0x41D
Error Description: The service did not respond to the start or control request in a timely fashion.
Anyone have an idea what could be the cause? I found this additional error in the event log, but distributed file system hasn't been installed since the beginning.
DFS could not access its private data from the Active Directory. Please manually check network connectivity, security access, and/or consistency of DFS information in the Active Directory. This error occurred on root REMINST.

Similar Messages

  • WDS Server Service won't start - 'An error occurred trying to start the Windows Deployment Services Server.'

    I'm having issues installing starting the WDS server service on Win 2008 R2,  this is happening on multiple (all 2008 R2) systems on this domain so I'm beginning to think it's either AD or network related, in event viewer I get the following error.
    'An error occurred trying to start the Windows Deployment Services Server.'
    Error Information: 0x0906
    EventID : 257 
    single domain, single forest, 2008 R2 functional level, both system are virtual plugged into same vswitch on a flat network.
    any ideas what might be the issue?  I've never had an issue getting this working on many occasions before today and I've come to many a dead end looking at other articles thus far... 
    With WDS tracing enabled I get the following error information:
    [4304] 09:22:11: ===>Starting logging of module [WDSServer]
    [4304] 09:22:11: [UDPPorts] Policy: 1, Dynamic Port Range: 64001-65000.
    [4304] 09:22:11: [RPC] Using Tcp Port 5040 for Rpc Calls.
    [4304] 09:22:11: [RPC] Client Impersonation Logging=Disabled
    [4304] 09:22:11: [RPC] Host Name: sccm.domain.local
    [4304] 09:22:11: [RPC] NTLM/Kerberos Spn: ldap/sccm.domain.local
    [4304] 09:22:11: [RPC] Initialized
    [3756] 09:22:11: [RPC] Server Started.
    [4304] 09:22:11: [BINLSVC][RPC][Ep={5F4FB9F0-C0E3-41C1-AA00-9A7C690AC3A3}] Registered
    [4304] 09:22:11: [BINLSVC] Provider Initialized.
    [4304] 09:22:11: [WDSDDPS][RPC][Ep={FA0A27E1-C2BA-4B3B-94B2-025E82FFAA6D}] Registered
    [4304] 09:22:11: [WDSDDPS][RPC][Ep={011D24AC-CB3A-4739-A339-5D2E1B5306CE}] Registered
    [4304] 09:22:11: [51][WDSDDPS] [d:\w7rtm\base\ntsetup\opktools\wds\ddp\server\ddpprovider.cpp:196] Expression: , Win32 Error=0x906
    [4304] 09:22:11: [WDSDDPS][RPC][Ep={FA0A27E1-C2BA-4B3B-94B2-025E82FFAA6D}] Closed
    [4304] 09:22:11: [WDSDDPS][RPC][Ep={011D24AC-CB3A-4739-A339-5D2E1B5306CE}] Closed
    [4304] 09:22:11: [d:\w7rtm\base\ntsetup\opktools\wds\wdssrv\server\src\wdsprovider.cpp:144] Expression: , Win32 Error=0x906
    [4304] 09:22:11: [WDSDDPS] Initialization Failed (rc=2310)
    [4304] 09:22:11: [d:\w7rtm\base\ntsetup\opktools\wds\wdssrv\server\src\wdsprovhdl.cpp:172] Expression: , Win32 Error=0x906
    [4304] 09:22:11: [WDSDDPS] Deleted.
    [4304] 09:22:11: [d:\w7rtm\base\ntsetup\opktools\wds\wdssrv\server\src\wdsservice.cpp:178] Expression: , Win32 Error=0x906
    [4304] 09:22:11: [Udp] Listen Shutdown.
    [3756] 09:22:11: [RPC] Server terminated (rc=0)
    [4304] 09:22:11: [RPC] Listen Stopped.
    [4304] 09:22:11: [BINLSVC] Shutting down
    [4304] 09:22:11: [BINLSVC][RPC][Ep={5F4FB9F0-C0E3-41C1-AA00-9A7C690AC3A3}] Closed
    [4304] 09:22:11: [BINLSVC] Deleted.

    It seems I've found out the solution myself,  the issue seems to be caused when DHCP and WDS are on the same server, The installation must identify this during the first installation of WDS but not on subsequent installations, the method to
    get it working again is:
    1.      
    Install WDS Role (using defaults)
    2.      
    Make the following registry change:
    HKLM\SYSTEM\CurrentControlSet\services\WDSServer\Providers\WDSPXE\UseDhcpPorts  =  0
    3.      
    Run the following command line to initialize Windows Deployment Services:
    wdsutil /initialize-server /reminst:D:\RemoteInstall
    4.      
    Run the following command to enable the DHCP port registry setting
    wdsutil /Set-Server /UseDHCPPorts:No /DHCPOption60:Yes

  • Concurrency Visualizer Extension (VS2013): "An unknown error occurred while trying to start the collection process."

    Not sure if this is the right place to ask about this but since my question concerns an extension I'll give it a shot.
    I'm trying to use the Visual Studio 2013 Concurrency Visualizer extension to debug a simple test console application. I've set executive paging to disabled in the registry as it directed and hit "add SDK to project" in the concurrency
    visualizer menu options. And of course, restarted my computer to apply the settings. When I try to "start [the concurrency visualizer] with current project" I get an error popup:
    "An unknown error occurred while trying to start the collection process."
    I really need the concurrency profiling to start debugging contention in my multithreaded application. Prompt assistance would be much appreciated.

    Hi,
    This forum is to discuss and ask questions about extending and integrating with Visual Studio (using the Extension Manager, building VSX containers for deployment, Visual Studio SDK, and more), Visual Studio Online (REST APIs, service hooks, and OAuth),
    and Team Foundation Server.
    You have problems when using Concurrency Visualizer Extension, please ask in
    the page under "Q AND A". Since Concurrency Visualizer is a diagnostic tool, you can post this issue in
    Visual Studio Diagnostics (Debugger, Profiler, IntelliTrace) forum too.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • An error occurred while trying to contact the radio tuning service

    I get this error message when trying to connect to the radio stations on itunes?  "an error occurred while trying to contact the radio tuning service"  My computer is definitely connected to the internet as I can stream from pandora and safari and mail work?  Any suggestions?

    I suggest you browse this forum.  This issue has been going on for at least 3 days now.  It happens to some part of the time, some for all the time, not at all to others.
    It's not clear what the issue is, or where it lies.  If it's something to do with Apple's servers they are not likely to discuss it.  There was an issue like this a few months ago with the weather widgets and people kept on posting with no news until one day it suddenly started working, again with no news.  If you wish to, you can report to Apple.
    http://www.apple.com/feedback/itunesapp.html
    There are other applications that let you listed to online radio if you are desperate.  Check www.pure-mac.com

  • Windows could not start the windows deployment services server Error 1067: The Process terminated unexpectedly - Please help

    Hello All
    I am trying to set up a PXE service point on my DP in SCCM 2012 R2
    1) I have enabled the role on the DP
    2) rebooted and verified WDS installed as a role.( I let SCCM enable this role as instructed)
    3) When I tried to start the role from services I get the error below:
    Note: I also followed the troubleshooting steps in this technet article but still it stops at the half way point
    http://support.microsoft.com/kb/2009647/en-us
    Phil Balderos

    Hi,
    Here is a similar post for your reference.
    Windows Deployment Service
    http://www.windows-noob.com/forums/index.php?/topic/3938-windows-deployment-service/
    Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • An error occurred while trying to access the service?

    I'm trying to convert a PDF into Excel but I get the message 'an error occurred while trying to access the service'.
    I have tried logging into my Adobe account online and doing it within there, but once I have exported the file and pressed 'convert' it simply says 'conversion failure' with no explanation.
    My subscription is still valid, so I don't see why the problems?  Has anyone else had this issue and managed to fix it?  I get the error message regardless of whether I'm trying to convert to Word or Excel.
    Any ideas greatly appreciated!!
    Thanks
    Sophie

    Hi SHurcs,
    I'm sorry that you're having such trouble with your ExportPDF subscription. Does this error occur for one particular file, or with any file that you try to convert? What operating system and browser are you using?
    To get us started, here are a few things that you can try:
    In Reader, sign out, and then sign back in.
    Use a supported web browser:  http://www.adobe.com/acom/systemreqs/
    Clear the browser cache.
    If you're using a networked computer, make sure that there are no firewall/proxy settings that prevent you from uploading files to the Internet.
    Make sure that the files you're trying to convert are within the file-size limits for ExportPDF (100 MB).
    If the problem persists, please let us know, and tell us a bit more about the files that you're converting.
    Best,
    Sara

  • An error occured while trying to access the service

    i'm continually having issues with trying to convert my files from PDF to excel.  I keep on getting the error message "An error occured while trying to access the service" with no real explanation as to what is wrong.  I've tried several times on several different computers, logging on and off, changing users...same message everytime.  I have a time sensitive project to complete, and can't get it done if this conversion can't be done.  HELP!

    Hi J,
    Here are a couple documents that may assist you:
    'Getting started' guide
    FAQ
    Let me know if those help!
    Kindest regards, Stacy

  • An error occurred while trying to start Isengard - Cannot start Wily IEM

    Dear SAP,
    I have installed Wily IEM 8.2.2.0 in my Solution Manager server (windows 2008).
    I can start the service Introscope Enterprise Manager, but in the log, I get this error :
    INFO   | jvm 1    | 2011/01/04 10:25:31 | Introscope Enterprise Manager failed to start because:
    INFO   | jvm 1    | 2011/01/04 10:25:31 | An error occurred while trying to start Isengard.
    INFO   | jvm 1    | 2011/01/04 10:25:31 | Press 'Enter' to acknowledge....
    1. I have assigned SIDuser to the service
    2. I have also read and apply 1273028 OSS recommandations.
    Thanks for your help.
    Best regards
    SAP NetWeaverAdmin

    Dear Everyone,
    I got the same error. Today, I checked the log and it said something about Display 0.0. I guess the EMCtrl only works on graphical environment and I think I'm right. I run ./EMCtrl.sh through xmanager and it started and still started.
    Maybe SAP create the scenario incorrectly by assuming the wily introscope can only be started on graphical environment. This is not wily introscope mistake, because if I install the wily manually, I can start it from ssh.

  • An error occured while trying to copy the needed DB driver jar files

    When I try to run my web app, I see this error in the Output window.
    Creator will also put up a window essentially saying that I don't have a particular
    data source. But I do have that very data source there.
    The error seems to be pointing to this line in my build-impl.xml file
    <nbdeploy debugmode="false" clientUrlPart="${client.urlPart}" forceRedeploy="${forceRedeploy}"/>

    I'm using postgresql-8.1-404.jdbc3.jar
    I started this project with Creator2, so I don't know if the nbproject files
    are out of date or anything.
    Here's the output text:
    init:
    deps-module-jar:
    deps-ear-jar:
    deps-jar:
    Copying 1 file to /home/tc/dev/oms/src
    library-inclusion-in-archive:
    library-inclusion-in-manifest:
    Copying 1 file to /home/tc/dev/oms/build/web/WEB-INF/classes
    load-project-properties:
    installGraphics:
    installLayouts:
    compile:
    compile-jsps:
    pluto-hack-web-xml-run:
    portlet-container-deploy:
    jsCreatorDist:
    run-deploy:
    An error occured while trying to copy the needed DB driver jar files.
    Deployment error: An error occured while trying to copy the needed DB driver jar files.. See the server log file for details.
    Exception=Deployment error: An error occured while trying to copy the needed DB driver jar files.. See the server log file for details.
    Deployment error: An error occured while trying to copy the needed DB driver jar files.. See the server log file for details.
    at org.netbeans.modules.j2ee.deployment.devmodules.api.Deployment.deploy(Deployment.java:198)
    at org.netbeans.modules.j2ee.ant.Deploy.execute(Deploy.java:75)
    at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
    at org.apache.tools.ant.Task.perform(Task.java:364)
    at org.apache.tools.ant.Target.execute(Target.java:341)
    at org.apache.tools.ant.Target.performTasks(Target.java:369)
    at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
    at org.apache.tools.ant.Project.executeTargets(Project.java:1062)
    at org.apache.tools.ant.module.bridge.impl.BridgeImpl.run(BridgeImpl.java:234)
    at org.apache.tools.ant.module.run.TargetExecutor.run(TargetExecutor.java:242)
    at org.netbeans.core.execution.RunClassThread.run(RunClassThread.java:125)
    Caused by: An error occured while trying to copy the needed DB driver jar files.
    at org.netbeans.modules.j2ee.deployment.devmodules.api.Deployment.deploy(Deployment.java:139)
    ... 10 more
    /home/tc/dev/oms/nbproject/build-impl.xml:799: Deployment error: An error occured while trying to copy the needed DB driver jar files.. See the server log file for details.
    BUILD FAILED (total time: 7 minutes 21 seconds)

  • Sysprep - Fatal error occurred while trying to sysprep the machine

    On the 4th attempt to sysprep a Windows 7 Enterprise system, I get the dreaded, 'A fatal error occurred while trying to sysprep the machine.' 
    The setuperr.log shows:
    2010-08-04 13:57:58, Error      [0x0f0073] SYSPRP RunExternalDlls:Not running DLLs; either the machine is in an invalid state or we couldn't update the recorded state, dwRet = 31
    2010-08-04 13:57:58, Error      [0x0f00ae] SYSPRP WinMain:Hit failure while processing sysprep cleanup external providers; hr = 0x8007001f
    I've seen articles referring to the Windows Software Licensing Rearm program may have issues running more than three times in a single Windows image and to add <SkipRearm>1</SkipRearm> in the /unattend file...  but this did not help. 
    The Windows Media Player Network Sharing Service has also been disabled which is often referred to in other posts.
    The KB article: http://support.microsoft.com/kb/947212/en-us indicated that the resolution is to re-create the image for the machine... This is very frustrating. I'm hoping that there is
    a better resolution???
    How do you sysprep a machine more than three times to avoid this error?
    Thanks!! 
    930193

    I had a problem Where Runing slmgr /dlv returned 0 and could not sysprep a
    32 bit Win 7 Installed on C:drive
    Here is what I did to succeed whit Sysprep.
    Disable UAC
    Based on
    This :
    open notepad and copy paste the following:
    @ECHO OFF
    setLocal Enabledelayedexpansion
    for %%d in (c d e f g h i j k l m n o p q r s t u v w x y z) do (
      if exist %%d:\windows\system32 (
         SET drv1=%%d:\windows\system32
        reg load HKLM\MY_SYSTEM !drv1!
        reg delete HKLM\MY_SYSTEM\WPA /f
        reg unload HKLM\MY_SYSTEM
        GOTO END
    :END
    ECHO Done, Rebooting system...
    timeout 3
    wpeutil reboot
    Then in notepad chose file>save as, in File Type select "All Files", name it "c:\reset.bat"
    Reboot Your Pc, after bios screen press F8, Select "Repair Your Computer", select your keyboard layout, enter your credentials if needed,
    then select the last option "Open Command Prompt"
    type "c:\reset.bat" or "d:\reset.bat" (Sometimes Your Windows Partition get a different letter on the repair environment)
    Back on Windows follow step five if needed.
    Check under slmgr /dlv you have more than 0 under "Remaining Windows Rearm count"
    Download pstools.zip from
    here, extract content an copy psexec.exe to %windir%\System32
    run psexec.exe and accept the license agreement so it won't bother when running afterwards, close it.
    open notepad and copy paste the following:
    @ECHO OFF
    echo Stopping Windows Media Player Sharing Service..
    echo.
    net stop wmpnetworksvc
    echo.
    echo Deleting Old Sysprep Logs...
    echo.
    del /f /s /q %windir%\System32\sysprep\panther\*.*
    echo.
    echo Adding Required Sysprep Registry Keys...
    echo.
    REG ADD "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SoftwareProtectionPlatform" /v SkipRearm /t REG_DWORD /d 00000001 /f
    REG ADD HKLM\SYSTEM\Setup\Status\SysprepStatus /v GeneralizationState /t REG_DWORD /d 00000007 /f
    REG ADD HKLM\SYSTEM\Setup\Status\SysprepStatus /v CleanupState /t REG_DWORD /d 00000002 /f
    psexec -i -s REG ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\Sysprep\Cleanup /v "{EC9FE15D-99DD-4FB9-90D5-5B56E42A0F80}" /t REG_SZ /d "C:\\Windows\\System32\\iesysprep.dll,Sysprep_Cleanup_IE" /f
    psexec -i -s REG ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\Sysprep\Generalize /v "{EC9FE15D-99DD-4FB9-90D5-CE53C91AB9A1}" /t REG_SZ /d "C:\\Windows\\System32\\iesysprep.dll,Sysprep_Cleanup_IE" /f
    psexec -i -s REG ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\Sysprep\Specialize /v "{EC9FE15D-99DD-4FB9-90D5-676C338DC1DA}" /t REG_SZ /d "C:\\Windows\\System32\\iesysprep.dll,Sysprep_Cleanup_IE" /f
    echo.
    echo Uninstalling MSDTC...
    echo.
    msdtc -uninstall
    timeout 10
    echo.
    echo Reinstalling MSDTC...
    echo.
    msdtc -install
    timeout 10
    echo.
    echo Cross Your Fingers, Finally Running Sysprep...
    echo.
    %windir%\System32\sysprep\sysprep /generalize /oobe /shutdown /unattend:unattend.xml
    Change Last Line to suit your needs, ie: if you are not using an unnattend answer file, then delete /unattend:unattend.xml"
    Then in notepad chose file>save as, in File Type select "All Files", name it "%windir%\System32\do.cmd"
    if you use an unattend.xml file copy it to %windir%\System32\sysprep folder.
    Once you are ready run %windir%\System32\do.cmd
    Hope it helps,

  • I am using Adobe Reader with paid up service through May 2015.  When I attempt to convert a file from PDF or to PDF, I get the message "An error occured while trying to access the service.  What do I need to do to access the service paid for?

    I am using Adobe Reader with paid up service through May 2015.  When I attempt to convert a file either to PDF or from PDF, I get the error message, "An error occurred while trying to access the service".  What do I need to do to get access to the service I have paid for?

    Hi DeaconTomColorado,
    Please see "Error occurred when trying to access this service" when logging on to Acrobat.com.
    Adobe has just released an update to Adobe Reader, so if you're accessing the service via Reader, please let us know whether the update helps resolve the issue.
    Best,
    Sara

  • I keep getting the message"an error occurred while trying to access the service".  does anyone know what i need to do to resolve this problem.  I am trying to convert apdf file for msword?

    I keep getting the message"an error occurred while trying to access the service".  does anyone know what i need to do to resolve this problem.  I am trying to convert a PDF file for ms word?

    Adobe Reader is free; but you may have paid for the ExportPDF service.
    Contact Adobe Customer Care and click on the Still need help? button to chat with an agent.
    [topic moved to ExportPDF forum]

  • I cannot convert my pdf files to word. I keep getting an error message that "an error occurred while trying to access the service"?

    I cannot convert my pdf files to word. I keep getting an error message that "an error occurred while trying to access the service"?

    See if anything in here helps: https://forums.adobe.com/docs/DOC-1831
    [topic moved to ExportPDF forum]

  • Receive error message "An error occurred while trying to access the service" when I try to convert a file?

    When I attempt to convert a file, either to PDF or from PDF I receive the error message "An error occurred while trying to access the service" what can I do to resolve?  I already applied updates and attempted to fix?

    You could always sign into Acrobat.com directly and use the service through the web site if it's a critical need.

  • ExportPDF - "an error occurred while trying to access the service"

    I have never had a problem using ExportPDF in the past but recently I am getting an error message saying "an error occurred while trying to access the service".  I am using the same browser, Chrome, that I have always used.  Please tell me how to fix this.

    Hi billbeaton,
    Please log out, clear the browser cache, and then reload https://cloud.acrobat.com. If that doesn't work, please try logging in using a different web browser (simply as a test).
    Has anything changed on your system since you were last able to log in to Acrobat.com? Are you using Mac OS or Windows?
    Best,
    Sara

Maybe you are looking for