An error occurs opening a specific image

Yesterday I was working on a flyer (.psd format) for a client of mine. The first time I saved it I had no problem, while the second time I tried to do the same this error occurred "It's impossible to save the image. A software error occurs".
Then I managed to save it just deleting the last passages i've done after the first time I saved it, then I closed the image and did the modifications again.
After I've finished my work I saved it (.psd format) without problems and closed the .psd file.
Since this morning I'm not able anymore to open it as this error keep on occurring "It's impossible to open the image. A software error occurs".
I can view it thru the preview program, but  it's impossible to open it in Photoshop.
Any suggestion?
I work with an Imac and the operating system is OS X 10.8.5 (12F45), CPU 3,2 GHz Intel Core i5, RAM 16 GB 1600 MHz DDR3, Video Card NVIDIA GeForce GTX 675MX 1024 MB
My Photoshop CS6 version is: 13.0.5
Thank you in advance for your help.

Please delete the book and download it again as book was not correctly downloaded or saved on machine.
Thanks

Similar Messages

  • Flash CS5 ِAn error occurred opening file and WinRar The archive is either in unknown format or damaged

    I have fla files and when I opened by flash cs5 11.5.1 it says "An error occurred opening file". I tried sure to make it rar or zip and repair it. When I opened by WinRar it says "The archive is either in unknown format or damaged"
    Please Please Please Help ME !!!!! .. I have been done a lot of work on it .. I am so tired .. Please Help Me Please
    Thank you so much

    do you have a working swf?
    if so, you can decompile it and recover some or all your work.
    if not, are you able to rename the fla to a rar and then unrar it?

  • CSAP_MAT_BOM_CLOSE - No BOM was opened or an error occurred opening the BOM

    I am trying to update a BOM.  I am using
    FUNCTION 'CSAP_MAT_BOM_OPEN'
    FUNCTION 'CSAP_MAT_BOM_MAINTAIN'
    FUNCTION 'CSAP_MAT_BOM_CLOSE'
    The open returns a sy-subrc 0. so everything is ok
    The maintain also completes successfully
    but the close is giving me the error
      29                     859   No BOM was opened or an error occurred opening the BOM 
    The open was successful so I do not understand.  Any ideas?

    Dear Shiva Kumar.
    Thank you for your comment.
    I checked the threads.
    but I'm sorry that there isn't my ploblem.
    It's no ploblem using FM 'CSAP_MAT_BOM_MAINTAIN'.
    (also FM ''CSAP_MAT_BOM_OPEN')
    I can change the material BOM's compornent I need to change.
    In addition, there is no ploblem reading application log.
    I only get an error when I call the FM 'CSAP_MAT_BOM_CLOSE'.
    thank you.

  • "An error occured opening file".

    Hello, I am using flash cs 6 on Win 7, i was working on a project and my machine  got  shutdown due to lights, now i am getting error  "An error occured opening file". Can anybody please help me to recover this file?

    There is a way to try to recover it, and it may work. That is to take the couurpt .fla file, rename the ".fla" extension to ".rar" and open it in winrar. (When doing this, at some point yo will get a warning saying "this could damage the file", you can safely ignore this message.) Next, you open the file with winrar, and under one of the drop-dwon menus you have the opition that says "fix". click that. It'll load for a second then say "fix successful". Take the new .rar file that was just made, rename it back to the.fla extention, and try to open it in flash.
    I've read where people said it worked, but it never did for me (mine has gotten corrupt twice)

  • How to repair projects that get a "TickTime.cpp-290" error after opening a specific project.

    This is a guide to repair projects that get a "TickTime.cpp-290" error after opening a specific project.
    Prerequisites:
    Project repair tool (download link below)
    WinRAR or any file archiver
    Damaged project file
    As an example, let's say the name of my damaged project is 'test.prproj'
    Steps:
    1. Download the project repair tool here: https://www.dropbox.com/s/3fyja0ws7l5gkbt/pp-repair-0.1.35.zip?dl=0
    2. Rename your project file extension from 'test.prproj' to 'test.zip' (a warning appears saying the file might become unusable. Do not be concerned about the warning. Click OK and move to the next step.)
    3. Extract the contents of 'test.zip' to a location on your computer. (Right click on the file and select ‘Extract files’ > Choose a location > Click OK).
    4. Go to the extracted location. Note the file 'test' has no extension.
    5. Rename the file, 'test.prproj'.
    6. Launch the project repair tool, and then select the file 'test.prproj' (the one that we renamed in the last step).
    7. Deselect all the check-boxes in the project repair tool.
    8. Click the Repair button.
    9. After a few seconds you see a message saying 'Success'.
    10. Open the repaired file in Premiere Pro and then reset the workspace. Choose Window > Workspace > Reset Current Workspace.
    11. Click the Save button to reduce the project size.
    12. Your project is now repaired.
    NOTE: If a file containing letters such as ã, å, ê, í, ú don’t repair, rename the file to something that doesn't contain these letters.

    Hi Rameez,
    first of all thanks a bunch for the tool - it saved our neck this morning on a tight deadline.
    One minor note: I did get a message that the (already uncompressed + renamed) file is not uncompressed until I ran the tool as Administrator so you might want to add that to the FAQ entry...
    Other than that I'm very much interested in what triggers this bug so we can potentially prevent it.
    Background:
    Specs: Windows 8.1, German locale (ie comma is decimal symbol), Premiere Pro CC 2014.2 installed in English
    My colleague who ran into the TickTime.cpp-290 error remembers having created a new workspace while working on the project. That seems to have triggered the issue as we haven't had any trouble on other projects yet. It also got saved into the project file:
    <MZ.Project.WorkspaceName>Bearbeitung</MZ.Project.WorkspaceName>
    Any autosaves after he added the workspace were corrupted as well while the ones dating back to earlier still open fine.
    I'd like to mention that Premiere did import previous (German language) workspaces - dating back until CS5. Not sure if that comes into play.
    On the other hand, the debug log looks like there only is an issue with the decimal symbol:
    10:08:06: Input: C:/temp/trouble/uncompressed/final.prproj
    10:08:06: Path: C:/temp/trouble/uncompressed Basename: final Extension:prproj
    10:08:06: 19852-> from: <PlaybackSpeed>0,069148936170212769</PlaybackSpeed>
    10:08:06: 19852-> to:   <PlaybackSpeed>0.069148936170212769</PlaybackSpeed>
    10:08:06: 23970-> from: <PlaybackSpeed>0,0062741915889604422</PlaybackSpeed>
    10:08:06: 23970-> to:   <PlaybackSpeed>0.0062741915889604422</PlaybackSpeed>
    I really need to make sure that this is no general problem with German locales as we have multiple users on this kind of config and can't afford projects breaking.
    Or do we "just" need to watch out to get rid of the old workspaces? I'm a little puzzled to be honest.
    Maybe it helps to mention that we are on CC Enterprise
    Best regards,
    Mike

  • EclipseMemoryAnalyzer error occurred opening a PHD file

    Hi All
    after applying the plug-in for Eclipse in order to open the PHD file, I start opening it and it looks fine till it gets to 11% getting the following error:
    an internal error occurred during: "Parsing heap dump file....."             
    /..../string is not an array
    Can you please advise?
    Would you tell me the best way to open a .phd file?
    Regards
    MG

    +Thanks all for taking the time to help out here. Your time is truly appreciated.+
    I looked in the iWork '09:Numbers.app:Contents:Resources:Templates:Shared subdirectory, and the file style-thumbail-Basic.tiff IS there.
    Mini:Numbers.app david$ pwd
    /Applications/iWork '09/Numbers.app
    Mini:Numbers.app david$ cd Contents/Resources/Templates/Shared
    Mini:Shared david$ ls -al style-thumbail-B*
    -rw-rw-r-- 1 root admin 3816 Oct 16 2008 style-thumbail-Basic (No Grid).tiff
    -rw-rw-r-- 1 root admin 1072 Oct 16 2008 style-thumbail-Basic.tiff
    -rw-rw-r-- 1 root admin 1002 Oct 16 2008 style-thumbail-Beige.tiff
    -rw-rw-r-- 1 root admin 1178 Oct 16 2008 style-thumbail-Blue Fill.tiff
    -rw-rw-r-- 1 root admin 1162 Oct 16 2008 style-thumbail-Blue Headers.tiff
    -rw-rw-r-- 1 root admin 1276 Oct 16 2008 style-thumbail-Blue-1.tiff
    Mini:Shared david$
    Any other ideas?
    For what it's worth, the document I'm working with started life as a iWork '08 document. The document is a simple, single sheet, single table document.
    Thanks,
    David
    Message was edited by: David Says Help Me Please

  • Error when opening file; see image for details

    I receive the following error when opening an ai file that was emailed to me.

    sk the sender to ZIP the file before sending and then send again.

  • Error when opening Canon Raw images.....Photoshop CC2014

    Hi,
    tried already in the german forums without answer, so will try it her
    System:
    macbook pro 2012, Core i7
    16GB Ram
    after upgradinf to 10.10. full and the upgrades for Photoshop i have the following problem,
    this occured 4 times now.
    When double clicking a Canon Raw Image (.cr2 file) Camera Raw 8.6 opens.
    Now i can adjust the pic - and/or can open it into Photoshop
    worked fine so far....but not always since the update
    If i do so, sometime the pic will be opened like this
    is here a photoshop pro aware of this error?
    So far i did NOT reinstall Photoshop.
    Its the only application i use (and PTGui sometimes)
    happens since the last updates
    The only thing i did is: also using (at this time only installed) Lighroom. Have to look how it works first
    Ideas or suggestions?
    Thanks
    Frank

    I have made a few more observations.
    I can actually open Camera Raw if I click the "Open in Camera Raw..." icon i Bridge.
    In Camera Raw I can save files as .psd for example, and also open them in Photoshop. I still get the error when I try to open Camera Raw settings.

  • F4180 an error occured sending the scanned images

    On the set up screen the space for where to send the image is blank and will not let me type anything in or scroll to show available folders - so that is probably why I get an error message.
    I have the orginal disk labeled Windows 2000, XP, Vista Version 8.0 
    HP Deskjet F2100 Series HP Desk Jet F4100 Series 
    I have uninstalled and reinstalled the printer. 
    Using a HP Notebook G60-440US

    Hey @FBT,
    Thanks for getting back to me regarding this issue. Due to the errors that the Print and Scan Doctor Tool encountered regarding the message "Your system needs an update to fix this solution center error" I am going to have you manually remove and reinstall your drivers to resolve this issue. Please follow the steps below.
    Step 1: Uninstall the Drivers:
    Click on your Start menu
    Select All Programs or Programs
    Select the HP folder
    Select your HP Officejet
    Select Uninstall
    Follow any onscreen instructions to complete the uninstall process
    Step 2: Run CCleaner:
    To ensure that there are no malicious files on your computer or Registry corruptions on your computer that could be causing this issue I am going to have you run a CCleaner on your system.
    Please click here to download the CCleaner. When the website opens select the Free Download button at the top. Allow the CCleaner to run and perform the cleanup scans.
    Once the tool has completed, please proceed to the next step.
    Step 3: Reinstall Drivers:
    Please click here to download the appropriate drivers for your printer
    Once the website opens select the 'Download' button on the top left
    When prompted allow the download to Run
    Follow the onscreen instructions to reinstall the printer
    Do not plug the USB Cable in until the installer prompts you to
    Once the installation is complete please test scanning again.
    Please let me know if these steps resolve your issue. Good luck!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • An error occurred opening file. Flash can not parse this document".

    I working on a keyframe animation for a client.  It was working until the recent flash player patch. Now the file is corrupt and not working.  I have four back up files on two different hard drives, still no luck.  I can't afford to keep recreating files when it should be probably saving in the first place. Is there way to recover the files properly? This devastating I really need some help.  Thanks

    Do the experiment, take a FLA file, change the extention to zip and open it, you'll see the content.
    When a file is damaged, what happens, is missing information that makes up or this information was altered. In an image file, we can see the damage with incorrect color pixels.
    A damaged word file has unknown characters and missing characters.
    In both cases the files can be opened, the big problem is when the files are compressed, since a small lack of information is reflected in many small gaps.
    The repair of compressed files, look for "holes", the lid infrmacion may or may not be correct, but allows them to be open.
    Fla files are not encrypted, are compressed files with a certain structure and xml, with construction information.
    In my experience, any FLA file will not open, open it worth trying this method

  • "An error occurred opening file"

    Hi everyone,
    I have a file that was opening fine in CS4. Now I try to open it in CC and it will not open.
    The error message is attached. I'm on a Mac running OS X 10.8.5.
    CC should be able to open CS4 files, correct?

    Does it have ActionScript 2.0 in it? CC doesn't support AS2.0, only 3.0.
    On Windows we're warned about this but I've seen some differences between Windows and Mac in CC so this might be one. On Windows we see:
    I'm merely asking because you're using CS4 so chances are it might be AS2.0.

  • An error occured opening file.... in flash professional cc

    I have followed other instructions on the forum but nothing is working.  Someone please help.  Need to fix for a University assignment ASAP.

    Check the file size first, if it's not 0 Kb then there is a chance of recovering your data.
    Rename your file from .flv to .zip and extract the contents. You can then try to open the xfl file in Flash Pro.
    Alternately, if you have an exported SWF of your original file, you may import it within Flash Pro to recover its data.
    The new update of Flash Pro (14.1.0.96) allows importing of SWF.

  • In Imovie 2011-Trying to image capture my project but it comes up after 10 hours- The project could not be prepared for publishing because an error occurred. File already open with write permission. Hopefully someone can help me.

    In Imovie 2011- Trying to image capture my project but it come up after 10 hours of rendering- The project could no be prepared for publishing because an error occured. File already open with write permission. Please Help!

    oh and ive tried publishing to almost everything. straight to idvd, to media browser, i tried both hd qualities and also the large quality. no luck with any of those

  • A generic error occurred in GDI+ while assing tiff image file to Bitmap and Image

    Hi,
    I am getting "A generic error occurred in GDI+" error while reading the tiff image file to Bitmap or Image.
    Below is my sample code.
    string filePath=@"c:\Images\sample.tif";
    Bitmap bmp=new Bitmap(filePath);   // here getting exception
    int totalpages=bmp.GetFrameCount(.....);
    etc......
    I tried using Bitmap.FromFile() and also from FromStream() even for Image also but there is no use.
    Moreover i m having full permissions for the file path and the tiff file is having multiple pages.
    Can anyone help me to solve this issue please.
    Thanks & Regards,
    Kishore
    Kishore

    Make sure that the Tif file is valid (can other software open it)?  If you are able to save a Tif using GDI+, try saving that Tif, then opening it.  Part of me wonders if there is something about that specific Tif that GDI+ doesn't like.
    You could also try using WIC to open the TIF, perhaps you would have better luck there.

  • A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (p

    A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
    the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
    The system cannot find the file specified
    Cannot connect to COWBOYS.
    Here are the technical details===================================
    A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
    Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
    For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
    Error Number: 2
    Severity: 20
    State: 0
    Program Location:
       at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
       at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
       at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
    timeout)
       at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
       at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
    SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
       at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
       at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
       at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
       at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
       at System.Data.SqlClient.SqlConnection.Open()
       at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
       at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
    ===================================
    The system cannot find the file specified
    I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
    Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
    many times and cannot connect to my local DB. 
    How do I connect to my Local DB? 
    Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
    instance ID from name). Please uninstall then re-run setup to correct this problem.
    I would happily re install it, if it wasn't my 20th time.
    I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
    May be the solution is very simple, but I am too frustrated. 
    Some of the things I have tried:
    From a command prompt, enter one of the following commands:
    net start "SQL Server Agent (MSSQLSERVER)" OR 
    net start "SQL Server Agent(instancename)"(for instance)
    on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
    Details
    Product:
    SQL Server
    ID:
    2
    Source:
    MSSQLServer
    Version:
    10.0
    Component:
    SQLEngine
    Message:
    An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
    40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
    Explanation
    SQL Server did not respond to the client request because the server is probably not started.
    User Action
    Make sure that the server is started.
    Version:
    9.0
    Component:
    SQLEngine
    Message:
    An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
    40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
    Explanation
    SQL Server did not respond to the client request because the server is probably not started.
    User Action
    Make sure that the server is started.
    Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.

    It sounds like there are a couple things going on here.  First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
    Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance.  Once you find this, make sure the service is started. 
    If not started, try to start it and see if it throws an error.  If you get an error, post the error message your hitting.  If the service starts, you can then launch SSMS and try to connect.  If you have a default instance, you can use the machine
    name in the connection dialog.  Ex:  "COWBOYS" where Cowboys is the machine name.  However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format.  Ex:  COWBOYS\Romo (where Romo
    is the instance name you set during install).
    You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install.  Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
    recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
    Thanks,
    Sam Lester (MSFT)
    http://blogs.msdn.com/b/samlester
    This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
    "Mark as Answer" and
    "Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

Maybe you are looking for