An error occurs while writing to device

whenever i try to sync anything to my phone it says an error occurred while writing to device please help ffs

Did you check your security software settings? http://support.apple.com/kb/TS3125

Similar Messages

  • 2 error msgs while synching to I-pod touch.  "An error occurred while writing to the device.  Also, I-pod cann be synced, required disk cannot be found.

    Two error messages appear while trying to synch to I-pod touch.  "I-pod cannot be synced.  An error occurred while writing to the device."  Second msg:  I-pod cannot be synced, required disk cannot be found." 

    The latter error can usually be resolved by deleting the iPod Photo Cache folder.  See the following for its location.
    iTunes: Photo sync creates iPod Photo Cache folder
    For the former error, I would try again.  Then I would reset the iPod and try again.
    Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next I would restore the iPod.

  • An error occurred while ready from devices

    I am using windows vista and trying to sync up to my pc. When I try to sync up, I get the message that an error occurred while reading from device and an error occurred while writing to the device. I have two iPods. One iPod had a restore done to it. One iPod is brand new. Both iPods can download apps through the internet without any problems.

    You may find this article of assistance:
    http://pondini.org/OSX/Setup.html
    Ciao.

  • An internal error occurred while writing imported graphics in this document. The file has been saved

    An internal error occurred while writing imported graphics in this document. The file has been saved, but has lost some image data. Please report this error to Adobe Technical Support.
    How do i fix this, there are no images in the document
    thanks
    emma

    We are running FM version 7.2b144 on MS Win xp Pro (32 bit), and I did not notice this until service pack 3 was installed. I believe I have found a work around to the situation and another contributing cause. If graphic files are placed directly in an anchored frame instead of importing by reference, the file somehow becomes misplaced. If you right click the graphic and open the Object Properties dialog box, and see the phrase "no referenced file" below Main Editor: Referenced File: in the lower left hand corner, this has happened. I found if I removed all graphics files without references and imported them by reference, the source file may then be properly saved. I am also using a program called CCleaner, which removes cookies, temp files, browsing history and the like from a system. If the program settings are chosen too aggressively, and the application runs when FM has a file open, this same error will occur, even if all files are referenced properly. I don't know if SP3 has some similar application which is now running in the background and causing this.
    To summarize, if you want to retain SP3, I have eliminated this error by confirming the links to referenced graphics files and avoiding using 3rd party "cleaners" while FM is open.

  • "error occured while reading from device"

    when trying to sync our itouches the device is initailly recongnized in itunes and will begin to sync , but never gets through the whole proccess - each time it gets to a different step, but always ends with error message "ipod cannot sync as an error occured while reading from device" or something close to that...any ideas or help please....
    i have checked the usb drivers...uninstalled and reinstalled itunes and removed the security software that I can find....

    It could be to either a problem with a "file" that is either one the iPod or on the computer that is trying to be read for syncing. I would in order:
    - Reset the iPod:
    Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod via iTunes. First from backup then to factory defaults/new iPod.

  • Error occured while writing cube data

    Hi all,
    I was working around with the manage ownership section. When i tried to change [PCON] or [POWN] values and save it, I get an error message saying "Error occurred while writing cube data". After doing some googling I found out that this was because [PCON] and [POWN] are system accounts and hence we cannot submit data to it.
    Is there any way how I can resolve this issue? I have 2-3 entities which have minority and do not have 100% ownership/consolidation. Please help me out in this matter.
    Regards,
    Ramith

    It should work, check if this helps. Page 133 http://docs.oracle.com/cd/E12825_01/epm.111/hfm_user.pdf

  • Error occurred while writing cube data - PCon

    Hi,
    Could you help me? I have created new application, but when I try to enter and save PCon values, I get a message: "Error occurred while writing cube data.". What could be the reason? I was able to update other data forms.
    Thank you in advance

    It should work, check if this helps. Page 133 http://docs.oracle.com/cd/E12825_01/epm.111/hfm_user.pdf

  • API5317: Error occured while writing to archive file

    We have been making daily archives for weeks and then one morning started getting this error:
    API5317: Error occured while writing to archive file f:\OWB\Archives\Daily\backups\Friday\projects\erm_phase1\project.mdl
    We have checked space on the disc, and running the archive from different PCs. Is possible that there is a limit on the archive file? The archive file is in the order of 21M. I am worried about the upgrade to the new version if we cannot make archives. Any suggestions?

    Marlene,
    Which OWB version are you using and what is the database version?
    Regards:
    Igor

  • PSE8 "Error occurred while writing the disk" during backup

    Last night I tried doing a full backup of my PSE8 catalog to DVD-R disks using the PSE8 "backup to CD/DVD" feature.  The program told me I would need 17 disks, so I let it run.  It was burning the 13th disk when it produced an error stating "An error occurred while writing the disc.  Result 13, Command 42, Sense 5, asc 33, ascq 2".
    I swapped out the supposedly bad disk for a new one and selected "Retry".  It burned for several minutes (what I believe to be the whole disk) before producing the exact same error again.  Not wanting to give up on 90 minutes of work, I kept retrying with new blank disks, and it failed on every one in the same way.  It would write what seemed like the entire disk and then the same error would appear.  This produced 6 coasters in a row before I gave up and cancelled the job (that's 18 disks and 2 1/2 hours of my time wasted).
    I'm using a Samsung SH-S182M burner with the most current firmware (SB06), and LG DVD-R disks.  I've had no trouble with this burner in any other software.  My system has WinXP Pro SP3, 4GB RAM, RAID-0, and an AMD Athlon 64 FX-60 CPU.  No lack of hardware resources.
    I seem to recall having the same kind of trouble with PSE5 a couple years ago, possibly using a different DVD burner at the time (on the same computer).  Since I normally do backups using 3rd-party software and an external hard drive, I only rarely use the PSE8 backup tool.  I'm not sure it has ever worked properly for me.
    Does anybody know what this error means, and why it doesn't happen until well into the process?  And why it suddenly fails on every disk from that point on?

    There doesn't seem any issue with disc drive or the DVD media. It could be because of any particular file which Organizer is unable to write. To confirm this, we need to check if the backup to hard disk works fine.

  • When trying to sync my iPad I am getting a message stating " iTunes could not connect to the iPad "iPad" because an error occurred while reading the device

    When trying to sync my iPad I am getting a message stating that iTunes could not connect to the iPad "iPad " because an error occurred while reading from the device

    Hi Centreless,
    If you have difficulty with your iPad not being able to connect to iTunes in order to sync, you may want to try the troubleshooting steps in this article -
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • UC560 An error occured while configuring the device. To generate troubleshooting logs, choose help-support information - troubleshooting logs,

    Hi,
    I'm trying to configure UC560 using CCA.After configuring all the parameters and when i press APPLY CONFIGURATION, the following dialog box appears.
    Kindly suggest.

    Untick the "Use PKI Client Certificate when available" in the Site Properties. I would create a self-signed certificate for the DP. Don't forget to Update DP for all your boot images when you are finished.
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • Error occurred while installing the application: Invalid device specified

    Error occurred while installing the application: Invalid <device> specified i am getting this error on windows. How to solve that.

    Hi there.
    I know this is an old post, but I fell here having this same problem for some weeks now, and i just figured my issue. Hope it help others:
    My iPhone is connecting automatically with my itunes on computer. Not really sure what type of connection or wireless sync, but the fact is that it IS connecting.
    For some weird reason it gets Flash Builder crazy and it cannot find the right device anymore. Even when I get my iPhone connected by cable, it says that it found the device, but doesn`t publish to it. The Flash Builder says that it was published, but nothing gets installed, and the debugger cannot connect.
    MY SOLUTION (for now): Turn off the phone wi-fi, so it gets out of my home network. works like a charm and I finally can test on my device again.
    Really hope this helps.

  • Installed latest version of iTunes, now I cannot play music through my Airport express. I'm seeing the message "An error occurred while connecting to the AirPlay device "living room". The network connection failed.

    Installed latest version of iTunes, now I cannot play music through my Airport Express. I'm seeing the message "An error occurred while connecting to the AirPlay device "living room". The network connection failed..."Living room" is what I named the is what I named The AirPlay function of the Aport Express. Thanks!

    I have the same problem - did you solve it?

  • Move to new computer, get "An error occurred while reading files or writing files to disc. The disc

    I tried to move my PE6 install and catalog to a new computer.  It was on a Dell Windows XP machine, and I moved it to a Toshiba Windows 7 (64 bit) machine.  I have always kept my photo files on an external hard drive.  My photo library is 50GB, 10,000 files.  Here is what I did.
    Copied the original PE6 install file to the Toshiba.  Installed but didn’t activate it.
    Copied the entire My Catalog folder to the proper Windows 7 location.
    Plugged the external drive into the Toshiba.  Made sure the same drive letter as before (E).
    Fired up PE6 on Toshiba.  Looked good in Organizer.  Everything seemed to be there, but I didn't try to make changes at that point.
    Deactivated PE6 on the Dell.  Activated on the Toshiba.
    Then I realized that it is not right.  I can edit Keywords and Rating stars on the pics, but not dates, captions or notes.  I get “An error occurred while reading files or writing files to disc. The disc may be full or there may be problems with the source media.”
    Only a fraction of the external drive is in use.
    I can access the files on the external drive with another app (Windows Photo Viewer).
    I tried Reconnect All Missing Files.  Somewhat ambiguously, it says “There are no files to reconnect.”
    In the properties in the Organizer for each picture are the proper file names and paths.  Folder view works fine in Organizer.
    I can put new files in the same external drive directories, import them into PE6, then edit them normally.
    What is the easiest way to get Organizer properly connected to my files?  I suppose I could reimport all the pics on the new machine, but I assume I'd lose some of my metadata.  So that is out of the question.
    Thanks,
    Bill

    Are you sure that file paths are correct? I say this because under XP they would have originally pointed to Documents & Settings/My Pictures whereas on W7 it will be User/Pictures, albeit you are using an external hd.
    Take a look at this knowledge base note on the correct procedure for back-up and restore.
    I think writing metadata to files for such a large catalog will be a thankless task.
    http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html

  • "An error occurred while connecting to the AirPlay device "Living Room Apple TV". An unknown error occurred (406)."

    This error message keeps popping up overtime I try to play an iTunes bought tv show from my mac book pro to my apple tv "An error occurred while connecting to the AirPlay device “Living Room Apple TV”. An unknown error occurred (406)."
    Does anyone know what this means and how to fix it. Both devices are registered on the same apple id and password. This problem just started happening within the last week or so but prior to that everything was working as it should have. In fact since the launch of icloud things have been glitchy for me with purchasing and playing off the apple tv as well.
    Can someone please help?'
    Thanks

    Unfortunately Apple's error codes are very much a mystery (at least to me), try restarting the Apple TV, iPad and router. If that doesn't help look into whether you might be encountering interference on your network.
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel.

Maybe you are looking for