An error ocurred during the installation of assambly

trying to install the new itune have the older one just got the 4S but cant use it on my curent itune have an error ocurred during the installation of assambly it what it says and then back tracks and stops

These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

Similar Messages

An error ocurred during the installation of assembly 'Microsoft. VC80.crt,type="win32", version="8.0.50727.4053".publickKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="amd64".Please refer to help and support for more information. HRESULT: 0x80071A30

An error ocurred during the installation of assembly 'Microsoft. VC80.crt,type="win32", version="8.0.50727.4053".publickKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="amd64".Please refer to help and support for more information. HRESULT: 0x80071A30
Instale iTunes perfectamente, conecte mi iPone y me dijo que necesitaba otra version que borrase la actual y instalase la nueva, borre la que tenia, y al instalar la nueva me salia esto y no tengo forma de instalarla. Ya hice los tutoriales de la pagina, y nada.

OK. If both of you are Windows 7. Make sure you go to Windows update (START button, type in Windows Update). Check for updates and update whatever that are available. (especially Microsoft .NET Framework 4 )
After that see if you still get this error message.
The last resort would be to unistall and reinstall the whole thing.
Follow the steps below:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".

I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".processorArchitecture="x86""

Repair your Apple Application Support.
Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR

I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but th

I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

If you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
Try running the install program for the ZSC with the following command line:
setup.exe /V"STUNINSTALL=1"
If you've specified an uninstall password, try this one instead:
setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
Let me know if that helped you.
Daniel
>>>
From: Andy_DeWees<[email protected] du>
To:novell.support.zenworks.endpoint-security-management
Date: 2/5/2009 12:52 PM
Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

Cannot install itunes, I keep getting this message:An error occured during the installation of assembly 'Microsoft .VC80.CRT .type="win32" ,version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86"'. Please refer to Help and

Cannot install itunes, I keep getting this message:An error occured during the installation of assembly 'Microsoft .VC80.CRT .type="win32" ,version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86"'. Please refer to Help and

Repair your Apple Application Support.
Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR

Error occurred during the installation of assembly 'Microsoft.VC80.CRT... blah blah.. HELP!

I've been getting errors completely randomly.. I've yet to DL Itunes until recently and as I tried to start it up (with a seemingly perfectly fine installation I get this fat *** error.. error is as follows below.
An error occoured during the installation of assembly 'Microsoft.VC80.CRT,type="win32",version=8.0.50727.6195",publicKeyToken="1fc8b3 b9a1e18e3b",processorArchitecture="x86". Please refer to HELP and Support for more information. HRESULT: 0X80070216
^This was a pain in the ******* to rewrite as it wouldnt let me copy and paste. Please help me : /

See Troubleshooting issues with iTunes for Windows updates.
tt2

Cannot install itunes 10.6 to my windows 7 computer. Have tried several times, completely unistalled several times, all with same result. Error message that starts "An error occurred during the installation of assembly 'Microsoft VC80 CRT. type="win 32"

Keep getting the following error message when I try to instal itunes 10.6. An error occurred during the installation of assembly 'Microsoft VC80 CRT.type="win 32". version = "8.0 50727.61 95". public Key token = ""1fc8b3b9a1e18e3b." processor architeture = "x86". Please refer to help and support for more information.
HRESULT:0x80073712
The program then acts like it is still trying to load, but then I get another message later which reads:
Service 'Aple Mobile Device' failed to start. verify that you have sufficient privileges to start system services.
any suggestions?

HRESULT: 0x80073712
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 80073712, or some other number? (If they're another number, what number are you getting?)

I had to reinstall my itunes, and it wont reinstall, instead saying there was "an error occurred during the installation of assembly microsoft.vc80.crt.type = win32 version 8.0.50727 6195 public key token 1fc8b3b9a1e18e3b processorarchitecture = x86.

i had to reinstall my itunes, and it wont reinstall, instead saying there was "an error occurred during the installation of assembly microsoft.vc80.crt.type = win32 version 8.0.50727 6195 public key token 1fc8b3b9a1e18e3b processorarchitecture = x86.
I have taken all apple products off my computer per other suggestions, I have run malwarebytes with no viruses found, and have even tried installing itunes as a different user on my computer but get the same message everytime.

See Troubleshooting issues with iTunes for Windows updates.
tt2

Tried installing itunes 10.5 and recieved this error An error occured during the installation of assembly 'Micrsoft .VC80.CRT .type="win32" ,version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86"'. Please refer to Help and

Tried to install itunes 10/5 and got this error:
An error occured during the installation of assembly 'Micrsoft .VC80.CRT .type="win32" ,version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86"'. Please refer to Help and Support for more information. HRESULT: 0x80073712
Can anyone help solve this problem

Exactly the same problems as many others with iTunes 10.5 and my Windows 7 32 bit laptop: An error occurred during the installation of assembly 'Microsoft.VC80.CRT .type="win32", … HRESULT:0x800736FD. I followed the Apple instructions to completely uninstall earlier iTunes and all Apple applications and then tried to re-install iTunes 10.5. Numerous attempts. Still no success. Constantly goes through the install and then rolls back after failure.
By unzipping using WinRAR and installing each module separately it seems that the module that fails is the AppleApplicationSupport.msi
Finally I uninstalled everything again and reinstalled iTunes 10.4.1. This installed perfectly. So at least I still have iTunes.
I was able to install iTunes 10.5 on myWindows XP SP3 desktop.
I noticed with WinRAR that the AppleApplicationSupport.msi file with 10.5 is a completely different size to that with 10.4.1. This suggests to me a conflict between the latest AppleApplicationSupport.msi and Windows 7.

When i download iTunes during downloading process on messege shown: An error occurred during the installation of assembly'Microsoft CRT.version="8.0.50727.6195 publicKey Token = 1f c8 b3 b9a 1e 18e 3b processo rArhitecture = x86.

HELP PLS.......when i download iTunes during downloading process on messege shown: "An error occurred during the installation of assembly‘Microsoft CRT.version=”8.0.50727.6195 publicKey Token = 1f c8 b3 b9a 1e 18e 3b processo rArhitecture = x86." please refer to Help and Support for more information. HRESULT: 0x80073712.
when click ok it rolling back and start process download again. and at last this messege appear: Service‘Apple Mobile Device’ (Apple Mobile Device) failed to start. Verify that youhave sufficient privileges to start system services with option
Abort Retry Ignore
i tried all option one by one but i did not success to download itunes.
Please help .

You should check Windows update for Service Pack update, if there is any.
Otherwise, try to fix and update windows system filesas follows:
Go to command prompt (START/ALL PROGRAMS/ACCESSORIES right mouse click "command prompt" and choose "Run as Administrator"
type in
sfc /scannow
let Windows fix any system files that need to be repaired.
Restart the computer if it did actually repair any files.
Then do the download again.

Cannot install itunes Keep getting this message:An error occured during the installation of assembly 'Microsoft .VC80.CRT .type="win32" ,version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86"'. Please refer to Help and sup

Cannot install itunes Keep getting this message:An error occured during the installation of assembly 'Microsoft .VC80.CRT .type="win32" ,version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86"'. Please refer to Help and sup

These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

Hi, can anyone help me because I've been trying to download the iTunes and everytime I am installing it its says --- An error occured during the installation of assembly Microsoft.VC80.CRT,type,="win32",version,="8.0.50727.6195...etc..

Hi, can anyone help me because I've been trying to download the iTunes on my PC ( windows vista ) and everytime I am installing it its says --- An error occured during the installation of assembly Microsoft.VC80.CRT,type,="win32",version,="8.0.50727.6195...etc..Thank you.

it says that Windows Resource Protection could not start the repair service.
Okay. We've got a broken Windows Modules Installer on the PC, then.
It's a bit of an involved fix getting past it, but we've had success here with it in the past.
First, I'd strongly suggest setting up a system restore point.
Now try the Scenario III treatment from the following document:
Windows Update Error 80070424 in Vista
Head back into Windows Update and attempt to get updates again. If they still fail, this time with an 8000FFFF error code, try the following Microsoft document:
Windows Update error 8000FFFF
If you get Windows Updates flowing again, stock up on any you're behind on (restarting the PC when requested to do so). This may take some time and may have to be done in several batches, depending on how far you've fallen behind. Basically, keep going back to Windows Update until it stops offering you new updates.
After the updates have been installed, restart the PC one more time (in order to ensure that any pending installs requiring a restart have been resolved).
Now try another iTunes install. Does it go through without the 0x80070424 this time?

I am unable to install Itunes on Windows 7 as I am getting the message "an error occured during the installation of assembly "Microsoft VC80.CRT Type ="win32" version="8.0.50727.6195",public key token 1fc8b 3b 9a 1e 18e 3b",processorArchitecture="x86".Ple

I am unable to install Itunes on Windows 7 as I am getting the message "an error occured during the installation of assembly "Microsoft VC80.CRT Type ="win32" version="8.0.50727.6195”,public key token 1fc8b 3b 9a 1e 18e 3b”,processorArchitecture=”x86”.Please refer to Help and Support for more information:"HResult 0x800736FD

I found htis other post https://discussions.apple.com/thread/3401328?start=0&tstart=0
I also found this in another post
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

I am unable to install Itunes on Windows 7 as I am getting the message "an error occured during the installation of assembly "Microsoft VC80.CRT Type ="win32" version="8.0.50727.4053,public key token....."HResult 0X8007054f

I am unable to install Itunes on Windows 7 as I am getting the message "an error occured during the installation of assembly "Microsoft VC80.CRT Type ="win32" version="8.0.50727.4053,public key token....."HResult 0X8007054f

I found htis other post https://discussions.apple.com/thread/3401328?start=0&tstart=0
I also found this in another post
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

I am trying to reinstall itunes 10.5 and am getting the following error message. An error occurred during the installation of assembly "Microsoft.VC80.CRT.type="win32".version="8.0.50727.6195".publicKey Token="1fc8b3b9a1e18e3b"Anyone know how to fix this?

i am trying to reinstall itunes 10.5 and am getting the following error message.
An error occurred during the installation of assembly “Microsoft.VC80.CRT.type=”win32”.version=”8.0.50727.6195”.publicKeyToken=”1fc8b 3b9a1e18e3b”.processorArchitecture=”x86””. Please refer to Help and Support for more information. HRESULT:0X800736B3.
Anyone know how to fix this?

same problem. tried the ff fixes from microsoft but no joy
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/gett ing-error-message-an-error-occurred-during-the/10122022-2d88-4266-a695-6c6ddeafd 019?tab=AllReplies&page=1
http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/ windows-vista-unable-to-install-itunes-an-error/19b48df7-54c8-47f3-8854-d34118fa a79a
http://support.microsoft.com/mats/system_maintenance_for_windows/en-us
other ideas would be appreciated.
cheers

An error ocurred during the installation of assambly

Similar Messages

Maybe you are looking for