An error ocurred while installing os x - how to stop the upgrade process?
Hello:
I tried a lot of ways, entered on safe mode and redownloaded the upgrade, booted on recovery mode to check the disk (no errors), restarted the upgrade several times, I erased /Library/Updates... all of these I did several times but no luck...
How do I get it to stop trying to ugrade on reboot? the only way I can get into the old os is in safe mode, righ now i only want to get into the old os ... Any advise?
Hello:
I tried a lot of ways, entered on safe mode and redownloaded the upgrade, booted on recovery mode to check the disk (no errors), restarted the upgrade several times, I erased /Library/Updates... all of these I did several times but no luck...
How do I get it to stop trying to ugrade on reboot? the only way I can get into the old os is in safe mode, righ now i only want to get into the old os ... Any advise?
Similar Messages
-
Whenever I try to update an OSX Update, I get the error message "An error ocurred while installing updates." (103). Has anyone encountered any such error?
Try each of the following steps.
Step 1
If you're trying to install more than one update, do the updates one at a time.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/Updates
Right-click or control-click the highlighted line and select
Services ▹ Open
from the contextual menu. A folder should open. Move the contents to the Trash. You may be prompted for your administrator password. -
How to stop the running process chain
How to stop the running process chains or infopackges...just qm status change is enought?
BI - SM 37 - Kill the Job
ECC - SM 50 - Kill the job -
How to stop the backup process....
How to stop the backup process....
Okay, so it happens nearly everytime you synch your iPhone with your iTunes? Easy. As soon as it starts, hit the "X" in the bar where the backup process is being shown, this does NOT STOP the synching process, ONLY the backup process.
HOWEVER, keep in mind that a few times during the week (depends how often you synch ur iPhone) it will be good to let the backup process let run fully.
There we go. Problem solved...i agree its what i do i backup whenever i add a new app, or take more pics etc its exactly what i do its what ive been saying on all these threads talking about backups etc, im hoping in 2.0.1 will be bug fixes about this sort of thing...
-
PFRD 11.1.1.4 - How to stop the In-process Reports Server
I'm running an "out-of-the-box" PFRD 11.1.1.4 installation in Windows XP SP3.
According with documentation:
http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_strt006.htm#BEHDJFHD
To directly start or stop the in-process Reports Server using a URL, enter the following in your Web browser:
http://machine_name:port/reports/rwservlet/startserver
http://machine_name:port/reports/rwservlet/stopserver
startserver works.
stopserver returns:
REP-50171 : Authentication failed.
Tried
http://machine_name:port/reports/rwservlet/stopserver?authid=weblogic/passwd
same error.
Commented the line:
<!--security class="oracle.reports.server.RWJAZNSecurity" id="rwJaznSec"/-->
in rwserver.conf.
Same error.
The only uncomented elements in "rwservlet.properties" (original configuration) are
<server>rep_wls_reports_pfurtado-lap_asinst_1</server>
<singlesignon>no</singlesignon>
<inprocess>yes</inprocess>
Did any of you managed to stop "in-process" reports server using the reports servlet?
What credentials did you use?
Thanks & Best Regards
PauloThanks RZ!
The line you mentioned was already as you described.
According with the documentation:
[Starting and Stopping Reports Server|http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_strt001.htm#i1005629]
If Reports Server is running as an in-process server through the Reports Servlet, issue the following URL:
http://your_host_name:port_number/reports/rwservlet/stopserver?authid=admin user/admin password
Note:
authid is Reports Server's administration user name and password. In Oracle Reports 11g Release 1 (11.1.1), the default security is based on standards-based Java EE security model through Oracle Platform Security Services. For a non-secure Reports Server, this user is defined in the identifier element.
I added the identifier element to rwserver.conf and restarted WLS_REPORTS, but after this the in-process reports server failed to start with the usual generic exception.
I finally found the missing step in:
How To Secure Showjobs Web Command In A Non Secured Reports Server In Oracle Report 11g? (Doc ID 1242614.1)
The thing is that the identifier element has to be placed in the right location inside rwserver.conf:
The needed change is:
FROM
<queue maxQueueSize="1000"/>
<pluginParam name="mailServer" value="%MAILSERVER_NAME%"/>
TO
<queue maxQueueSize="1000"/>
<identifier encrypted="no">....type here your user/password....</identifier>
<pluginParam name="mailServer" value="%MAILSERVER_NAME%"/>
So although using the default non-secure reports server, the identifier element has to be present in rwserver.conf for rwservlet/stopserver to work as described above.
Otherwise the needed authentication will fail as described.
Regards
Paulo -
How to stop the upload process?
Hi,
i had by mistake started the other upload than the required!
How to stop the current upload process,( generally it takes lot of time to upload the data as data is huge )
Thanks,
RaviHi Ravi Kottur
Just follow the things like Sunil suggested check one more just kill the process
manually and goto RSMO and in the Monitor QM status just Amke it red manually
for the load which you want to stop and then go to that particular info provider
Manage and delte the request..
Hope itz clear a little atleast...!
Thanks & Regards
R M K
***Assigning pointz is the only way of saying thanx in SDN ***
**Learning the thingz is never end process if u stop it will Be a devil if u continue it will be a divine***
> Hi,
>
> i had by mistake started the other upload than the
> required!
>
> How to stop the current upload process,( generally it
> takes lot of time to upload the data as data is huge
> )
>
>
> Thanks,
> Ravi -
How to stop the boot process after the GRUB menu?
Hello there.
I am getting an error message in the boot process, after the GRUB menu, but I can't read completely the message because it is shown too fast. So, how can I stop the process when I see the error message, for writing down it?
Thanks in advance.zuargo wrote:
Hello there.
I am getting an error message in the boot process, after the GRUB menu, but I can't read completely the message because it is shown too fast. So, how can I stop the process when I see the error message, for writing down it?
Thanks in advance.
I didn't try this before, but if you use systemd, you may want to try systemd.confirm_spawn to invoke interactive booting process, so you can start the services one by one manually therefore locate the one throwing out error message.
It is explained in the systemd manual:
http://www.freedesktop.org/software/sys … stemd.html -
Since
the latest iOS download iCloud keeps trying to verify my account as well as keeps trying to upgrade. I can't figure out how to stop it as I also don't know my password And can't reset the iCloud PW. Any suggestions?Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
You will need to show patience with the procedure and be prepared to demonstrate without question that the account belongs to you. Don’t expect access to be restored immediately and if you aren’t the owner of the Apple ID registered to the device the account won’t be reset.
This is answer is provided from my own database of boilerplate responses and the content was last reviewed and/or tested on: 2014/12/18 -
Increse No of BGP while data load and how to bypass the DTPin Process Chain
Hello All,
We want to improve the performance of the loads. Currently we are loading the data from external Data Base though DB link. Just to mention we are on BI 7 system. We are by passing the PSA to load the data quickest. Unfortunately we cannot use PSA. Because loads times are more when we use PSA. So we are directly accessing views on external data base. Also external data base is indexed as per our requirement.
Currently our DTP is set to run on the 10 parallel processes (on DTP settings for batch Batch Manager with job class A). Even though we set to 10 we can see loads are running on 3 or 4 Back ground parallel processes only. Not sure why. Does any one know why it is behaving like that and how to increase them?
If I want to split the load into three. (Diff DTPs with Different selections). And all three will load the data into same info provider parallel. We have the routine in the selection that will look a table to get the respective selection conditions and all three DTPs will kick off parallel as part of the process chain.
But in some cases we only get the data for two or oneDTPs(depends on the selection conditions). In this case is there any way in routine or process chain to say that if there is no selection for that DTP then ignore that DTP or set to success for that DTP and process chain should continue.
Really appreciate your help.Hi
Sounds like a nice problemu2026
Here is a response to your questions:
Before I start, I just want to mention that I do not understand how you are bypassing the PSA if you are using a DTP? Be that as it may, I will respond regardless.
When looking at performance, you need to identify where your problem is.
First, execute your view directly on the database. Ask the DBA if you do not have access. If possible perform a database explain on the view (this can also be done from within SAPu2026I think). This step is required to ensure that the view is not the cause of your performance problem. If it is, we need to implement steps to resolve that.
If the view performs well, consider the following SAP BI ETL design changes:
1. Are you loading deltas or full loads. When you have performance problems u2013 the first thing to consider is to make use of the delta queue (or changing the extraction to just send deltas to BI)
2. Drop indexes before load and re-create them after the load
3. Make use of the BI 7.0 write optimized DSO. This allows for much faster loads.
4. Check if you do ABAP lookups during the load. If you do, consider loading the DSO that you are selecting on in memory and change the lookup to refer to the table in memory rather. This will save tremendous time in terms of DB I/O
5. This will have cost implications but the BI Accelerator will allow for much faster loads
Good luck! -
HT4623 i got 3004 error while installing ios 7 , how to fix it ?
i got 3004 error while installing ios 7 , how to fix it ?
I was trying to update my iphone 5 to IOS7 and couldnt do it for 5 times then I did the following and was able to update it right away
Clearing your DNS cache may resolve the issue and enable you to connect to the iTunes Store.
The easiest way to clear your DNS cache is to shut down your computer completely and then restart. If you can't shut down, you can clear your DNS cache manually.
Click Start and choose Run.
In the dialog that appears, type “cmd” (don’t type the quotes) and click OK.
After the DOS prompt (C:\), type “ipconfig /flushdns” (without the quotes) and press Enter. Make sure you enter a single blank space after “ipconfig.”
Let me know if it solved the issue for you -
Error occurred while installing the application: Invalid device specified
Error occurred while installing the application: Invalid <device> specified i am getting this error on windows. How to solve that.
Hi there.
I know this is an old post, but I fell here having this same problem for some weeks now, and i just figured my issue. Hope it help others:
My iPhone is connecting automatically with my itunes on computer. Not really sure what type of connection or wireless sync, but the fact is that it IS connecting.
For some weird reason it gets Flash Builder crazy and it cannot find the right device anymore. Even when I get my iPhone connected by cable, it says that it found the device, but doesn`t publish to it. The Flash Builder says that it was published, but nothing gets installed, and the debugger cannot connect.
MY SOLUTION (for now): Turn off the phone wi-fi, so it gets out of my home network. works like a charm and I finally can test on my device again.
Really hope this helps. -
Error occured while installing updates for itunes 10.6.1
I have been having issues lately trying to install my updates to iTunes. I keep getting an error message that says "Error occurred while installing the updates. If the problem persists, choose Tools > Download Only and try installing manually." This happened on the last update as well, and the install manually didn't work. I eventually had to uninstall iTunes and reinstall the latest version. But, if I keep doing this, I have to re-add all of my music folders, and recreate all of my playlists for every single update that comes out. That means like once a week. Does anyone know why I keep getting this message?
I have submitted a screenshot if that helps.
Also, I am running windows 7 on my computer. Thank youHmmm. I was wondering if it was an issue with a broken setupadmin.exe mucking up the works (because it's a tiny little file). But it's apparently the itunes64.msi causing us grief.
Plausibly, we might be looking at a disk/file damage thing that is preventing the msis and so forth from saving correctly. If so, running a disk check (chkdsk) over your C:\ Drive might help.
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
I purchased mountain lion, but after numerous attempts until my fingers all gone numb, i simply cannot install it on my imac. i get this error message: "an error occurred while installing OS X, you cannot install OS X on this disk......".
please help!
imac specs:
IMAC 24 inch Mid 2007
Intel 2.4 GHz 2 duo
4GB SDRAM
OS X lion 10.7.4
200 GB Harddrive space freeTell us more about the disk and partition onto which you are trying to install Mountain Lion:
Open Disk Utility (in Applications > Utilities). The left column should show your disk with its partition(s) indented below it:
How is the disk (top level container) formatted according to Disk Utility:
* What Partiton Map Scheme? (Should be "GUID Partition Table".)
* How many partitions? (Should be 1 unless you have a Boot Camp partition.)
How is the partition (lower level container) formatted according to Disk Utility? (Should be "Mac OS Extended (Journaled)".)
Message was edited by: markwmsn
(image inserted) -
installing Adobe Elements 11, I get an error message while "installing shared technologies"........any suggestions
Please review your installation logs to locate the error message affecting your installation. You can find details on how to review the install logs at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.
-
Time Machine Error: Unable to complete backup. An error ocurred while copy
Hi.
Everytime Time Machine tries to update my backup copy is gives me the same error: "Unable to complete backup. An error ocurred while copying files to the backup volume."
What's going on and how can I solve this?
Thanks.
Regards,
TelmoI have had this problem and solved it. It began when I upgraded to Snow Leopard server after a hard drive failure under Leopard Server. My problem was caused by a number of bad files.
To locate the files that are stopping the backup, open the Console utility in the Utilities folder. On the top left, show the Log List, and select the ALL Messages. Then in the search box, top right, enter .backup , this will locate all the backup logs. Go to the bottom of the log and locate the log that reads "stopping backup." Then, look at the log directly after "stopping backup," this log should contain the error message. In my case the log had an error -41, and the file path and name were listed. After locating and removing the bad file, run your backup again. If you have this problem again, repeat this process.
I had about 15 files with this problem, and oddly they all came from either a very old Mac OS X backup or had been moved from a Window XP computer using file sharing.
Hope this helps.
Maybe you are looking for
-
Adobe Reader 9.2- makes documents black- cannot view the PDF's content
Hi all Hoping someone else has seen this very wierd issue. I have a Terminal Server running Server 2003 SP1. (inherited) The End Users were experiencing issues with Reader not printing out correctly. They were previously using Reader v7.0. I download
-
Gahh, when can I buy an iPhone in Hong Kong??
Ahh... always out of stock. I wonder if I could buy one on the online store in Canada and let them ship it to my house in HK... lol
-
How do I restart a process without using a loop?
Hi, How can I restart a process without using the While action from the palette? The Wait action from the palette doesn't seem to do that. I simply want to restart a process after testing a condition in the Switch action. Thanks, Alexandru
-
BHOLD FIM Integration Fails on Database Configuration
Gentlemen, I hope you are familiar with BHOLD FIM Integration because i'm having a headache trying to install it. FIM Service installed successful and so BHOLD Core. However, when i tried to install BHOLD FIM Integration and logged the error and can
-
Dimension hierarchy does not process when using /CPMB/IMPORT_MASTER
Hi all Our system is SAP BPC NW 7.5 SP7 We are using a flat file to import master data and hierarchies. Unlike the import from InfoObject package, the flat file package does not process the hierarchy after the import. This means that it would have to