An error was detected on device \Device\Harddisk3\DR3 during a paging operation. - The driver detected a controller error on \Device\Harddisk3\DR7

How can i ensure that the harddisk3 designation is relatd with USB etxernal disk?
I have several erros in LOGs:
An error was detected on device \Device\Harddisk3\DR3 during a paging operation.
and
The driver detected a controller error on \Device\Harddisk3\DR7
All times are HardDisk3 and sometimes it references to DR3 and sometimes DR7
My disk structure is:
2 RAID5 arrays fomr the same disks (80GB and 2 TB)
and USB 2 TB External hard disk with several partitions
I´m 99% sure that the error is related to the external USB disk and the Dell DIag tool shows no problems with any component
DISKPART> list disk
  Disk ###  Status         Size     Free     Dyn  Gpt
  Disk 0    Online           80 GB      0 B
  Disk 1    Online         2711 GB      0 B        *
  Disk 2    Online         1862 GB  1024 KB
DISKPART> sele disk 0
Disk 0 is now the selected disk.
DISKPART> detail disk
DELL PERC H700 SCSI Disk Device
Disk ID: 6EFE3928
Type   : RAID
Status : Online
Path   : 1
Target : 0
LUN ID : 0
Location Path : PCIROOT(0)#PCI(0400)#PCI(0000)#RAID(P01T00L00)
Current Read-only State : No
Read-only  : No
Boot Disk  : Yes
Pagefile Disk  : Yes
Hibernation File Disk  : No
Crashdump Disk  : Yes
Clustered Disk  : No
  Volume ###  Ltr  Label        Fs     Type        Size     Status     Info
  Volume 3         System Rese  NTFS   Partition    100 MB  Healthy    System
  Volume 4     C   DISCO        NTFS   Partition     79 GB  Healthy    Boot
DISKPART> sele disk 1
Disk 1 is now the selected disk.
DISKPART> detail disk
DELL PERC H700 SCSI Disk Device
Disk ID: {A42559A8-43EF-4570-B4CF-336A22A718BF}
Type   : RAID
Status : Online
Path   : 1
Target : 1
LUN ID : 0
Location Path : PCIROOT(0)#PCI(0400)#PCI(0000)#RAID(P01T01L00)
Current Read-only State : No
Read-only  : No
Boot Disk  : No
Pagefile Disk  : No
Hibernation File Disk  : No
Crashdump Disk  : No
Clustered Disk  : No
  Volume ###  Ltr  Label        Fs     Type        Size     Status     Info
  Volume 5         DADOS        NTFS   Partition   2711 GB  Healthy
    C:\DADOS\
DISKPART> sele disk 2
Disk 2 is now the selected disk.
DISKPART> detail disk
HP External HDD USB Device
Disk ID: 000904F0
Type   : USB
Status : Online
Path   : 0
Target : 0
LUN ID : 0
Location Path : UNAVAILABLE
Current Read-only State : No
Read-only  : No
Boot Disk  : No
Pagefile Disk  : No
Hibernation File Disk  : No
Crashdump Disk  : No
Clustered Disk  : No
  Volume ###  Ltr  Label        Fs     Type        Size     Status     Info
  Volume 6         SOFTWARE     NTFS   Partition    300 GB  Healthy
    C:\DADOS\DISCO-EXTRA\
  Volume 7         TEMPORARIO-  NTFS   Partition    148 GB  Healthy
    C:\DADOS\NEW_TRANSF\TEMPORARIO\
  Volume 8         TRANSF_LIXO  NTFS   Partition    149 GB  Healthy
    C:\DADOS\NEW_TRANSF\TRANSF_LIXO\
  Volume 9     R   RESTORE      NTFS   Partition   1264 GB  Healthy

Hi,
For finding the exact hard disk you could refer to this article. It is an old article but the structure is not changed:
How to Distinguish a Physical Disk Device from an Event Message
http://support.microsoft.com/kb/159865
Meanwhile for the error message "error was detected on device \Device\Harddisk3\DR3 during a paging operation", according to my search result it could be related to fragments. So please try a defragment on your hard disk (if it is the USB disk then perform
a defragment on USB disk) and see the result. 
If you have any feedback on our support, please send to [email protected]

Similar Messages

  • 'An error was detected on device \Device\Harddisk0\D during a paging operation.'

    Hi,
    since a while (as far as i am able to roll back system log in event viewer) I am having strange issues in the sys log, as in the subject. It is a warning of disk event 51: 'An error was detected on device \Device\Harddisk0\D during a paging operation.'
    I have freed up 1/3 of each partition on the harddrive. Any idea where can i keep going to investigate?
    thx

    pogacsa,
    I have searched a bit about you issue in microsoft technet,and here's what they have got to say
    "An event ID 51 entry is a generic error entry for any type of error that occurs when Windows is paging information to input/output (I/O).
     A paging operation occurs when Windows either swaps a page of memory from memory to disk, or when Windows retrieves a page of memory from disk to memory."
    In this event, D, DR and FT, they all stand for a certain disk partition number. You can use the Registry or Disk Management to locate the certain disk.
    For further information, please refer to the following KBs:
    159865 How to distinguish a physical disk device from an event message 
    http://support.microsoft.com/kb/159865/en-us
    244780 Information about Event ID 51
    http://support.microsoft.com/kb/244780/en-us
    you may also want to check out this link from microsoft technet community as well.
    some of the resolutions mentioned there require you to modify your registry.Please DONOT attempt to modify the registry if you dont have enough prior knowledge about it
    Also try defragmenting your HDD once. 
    hope this info helps you
    Message Edited by vijaysaradhi on 06-03-2009 02:33 PM
    Cheers and regards,
    • » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
    ●๋•کáŕádhí'ک díáŕý ツ
    I am a volunteer here. I don't work for Lenovo

  • An error was detected on device \Device\Harddisk0 during a paging operation.

    Hi
    I have a Dell PE 2850 running Windows Server 2003 which is attached via SCSI to a Power Vault 220 SCSI disk enclosure.
    The server is beeping and in the eventvwr I see the following message:
    An error was detected on device \Device\Harddisk0 during a paging operation.
    There are no disk failure lights on the server so what is causing these errors in the Event Viewer?
    Thanks
    Paul

    The "error" doesn't have to mean that the disk is faulty, it's just that that specific write operation might have failed (for unknown reasons).
    That's all the light I can shed on it after looking through my event logs, I have a few of those too, but no errors anywhere else.Best regards
    Joachim Nässlander
    IT-Expert, Knowledge Factory
    (http://www.knowledgefactory.se)
    MVP Cluster
    Member of Microsoft Extended Experts Team (MEET)
    Blog: http://www.nullsession.com

  • The driver detected a controller error on \Device\Harddisk1-4\DR1-4.

    Hello all
    I just recently bought a new gaming PC on black friday and is running just fine.  Then one day i decided to take a look in the event log and i notice an error that would appear four time during startup of the machine.  
    The driver detected a controller error on \Device\Harddisk1\DR1.
    The driver detected a controller error on \Device\Harddisk2\DR2.
    The driver detected a controller error on \Device\Harddisk3\DR3.
    The driver detected a controller error on \Device\Harddisk4\DR4.
    I only have one internal hard drive located on disk 0 and an external located on disk 5. So i have no idea why i'm getting this error when nothing is connected.
    I installed the latest controller drivers and just for fun everything else related to my GIGABYTE motherboard but unfortunately still occurs after turning my computer. (note for the bios i have version F4 not sure if updating it to F5 is worth doing for
    this issue).
    If anyone could help me with this error or if i can just ignore it.
    Thank you

    Angel
    If the drive is an SSD update the firmware.
    Are the message an error (red symbol) or a warning (yellow symbol)?
    I would also run CHKDSK and get the diagnostic utility (and run it of course) from the HD mfr.
    CHKDSK /R /F
    Chkdsk disclaimer: While performing chkdsk on the hard drive if any bad sectors are found  any data available on that sector might be lost so as usual backup your data.
    Run CHKDSK /R /F from an elevated (Run as administrator) Command Prompt.
    Do this for each hard drive on your system.
    When it tells you it can't do it right now - and asks you if you'd like to do it at the next reboot - answer Y (for Yes) and press Enter.
    Then reboot and let the test run.
    It may take a while for it to run, but keep an occasional eye on it to see if it generates any errors.
    http://www.howtogeek.com/howto/windows-vista/guide-to-using-check-disk-in-windows-vista/
     See "CHKDSK LogFile" below in order to check the results of the test.
    CHKDSK LogFile:
    Go to Start and type in "eventvwr.msc" (without the quotes) and press Enter
    Expand the Windows logs heading, then select the Application log file entry.
    Double click on the Source column header.
    Scroll down the list until you find the Chkdsk entry (wininit for Win7) (winlogon for XP).
    Copy/paste the results into your next post. 
    Wanikiya and Dyami--Team Zigzag

  • The driver detected a controller error on \Device\Harddisk1\D

    Hope someone can help, yesterday in the event viewer I encountered the following error
    "The driver detected a controller error on \Device\Harddisk1\D
    ....I have added no new hardware for months, I checked this out on the microsoft website but they recommend changing the cable!
    I ran diagnostics on the hard drives and they found no errors at all ....I got a feeling it the motherboard, frustrating as this is the second board Ive had!
    Can anyone advise  on this error?
    My setup is as follows
    P4 3.2GHZ
    1GB Transcend Memory
    1 NEC 2510 DVD Wrtier
    1 IDE 120GB Maxtor Diamond Max
    2 X SATA HDD
    450 watt Thermaltake Butterfly PSU

    This seems to be a common problem between ICH5 chipsets and SATA NCQ drives. Apparantly a BIOS update will be able to fixed the problem but I'm not sure which BIOS you should use. I suggest that you check MSI's website to look into your mobo's BIOS release notes to find out more first.
    Please also note that there's an amount of risk to flashing your mobo's BIOS as and improper flash will caused the mobo to die immediately or having multiple errors due to bad flash. I would recommend that you flash through a floppy bootdisk which seems to be the best method till date.

  • EventId: 32, disk - The driver detected that the device \Device\Harddisk0\DR0 has its write cache enabled

    Virtualized 2012 R2 Domain Controller running on hyper-V.  Every boot lists the following error three times:
    EventId: 32, disk - The driver detected that the device \Device\Harddisk0\DR0 has its write cache enabled. 
    Data corruption may occur.
    Having checked the virtual SCSI disks all have their write cache enabled, is this correct or do I need to take some action to prevent these events?

    Hi,
    This is normal and you can't change it. This tells AD that write caching is enabled so it uses a different method to store information.
    http://www.hyper-v.nu/archives/hvredevoort/2013/07/keeping-your-virtual-active-directory-domain-controllers-safe/
    More information there.
    Thanks
    Denis
    Regards,
    Denis Cooper
    MCITP EA - MCT
    Help keep the forums tidy, if this has helped please mark it as an answer
    Blog: http://www.windows-support.co.uk 
    Twitter:   LinkedIn:

  • HT1212 i have an iphone 3s that was never connected to itunes but an icloud account was created and it is passcode disabled and i have tried the If you have never synced your device with iTunes recovery mode but it is still disabled

    i have an iphone 3s that was never connected to itunes but an icloud account was created and it is passcode disabled and i have tried the If you have never synced your device with iTunes recovery mode but it is still disabled it connected to itunes for a minute and then back to disabled

    Sounds like your iPhone was hacked to unlock and now updating locks back to the original carrier.
    Where did you get the iPhone?

  • Windows Could not find the Driver for your Apple iPod USB Device (5G 30GB)

    I have a 8GB iPod Nano. My roommate has a 30GB 5G Video. Black.
    My iPod syncs flawlessly. His is not recognized by Windows or iTunes. Every time we plug in the iPod, it prompts us for the driver. I tried to install the update apple mentions through the windows process, but after going through the tedious Windows Genuine Verification process, I was told that the update didn't apply to my computer.
    We use a Lenovo Thinkpad T60p, which shipped with Windows Vista Business.
    We are running iTunes 7.3.1.3, and there are no windows updates available for the computer.
    I have...
    ...reset
    ...reinstalled 7.3.1.3 (over and over and over)
    ...tried different USB ports. (Early on, we saw it once after swapping ports).
    ...tried turning off the ability of the computer to 'Turn this device off to save power."
    I have also verified that the iPod works on my work Dell Lattitude D620 running XP, and that it's not the cord, as we've used the cord that came with my Nano as well.
    So, the problem seems to be with vista, as many people seem to have had. The best thread I found that deals with this was http://discussions.apple.com/thread.jspa?threadID=995793.
    But even after having tried everything, I still have an unrecognizable iPod.
    When I run iPod diagonostics, everything seems okay, except for the iPod connection, which says failed. I've had difficulty working with the iPod service under Computer/Device Manager - it doesn't ever seem to stop or start, with the iPod plugged in or not.
    And interestingly enough, the FAT32 external harddrive that I use to back up my data exhibits exactly the same problem ("Windows could not find the driver for your USB Mass Storage Device). This device worked great in XP, and even odder, I have a FAT32 partition of the main HD as a swap space between my VistaOS and my Ubuntu installation.
    Do I have to chalk this up to another issue with Windows Vista? What bothers me there is that you're a ping-pong between windows support and apple support - no one really owns up the problem.

    Bill, I've been stuck in this loop for 3 months since buying a new laptop with Vista Basic. I've tried everything to no avail. I don't know what else to do apart from buying a cheap PC running XP. Let me know if you manage to find a solution and I'll do the same.
    Regards. Adam

  • The optical drive won't allow me to insert a CD.  Thinking there maybe a CD already in and the normal eject did not work I then tried the terminal  command "cdutil eject" but no CD is detected.  Any suggestions? or should I just replace the drive.

    I have a 4 year old Mac Book.  I can't insert a CD. When I try the CD goes almost 1/2 way in and then hits something hard.  Using Terminal and "cdutil eject" indicated that there was no disk in the drive.
    Any sugggestions? Or should I plan on replacing the optical drive?

    See if the pevious discussions listed on the right side of this page under the heading More Like This help.

  • TS1363 Error message for my ipod touch, ipad and Nano. they all say the same thing " there has been a device detected, but cannot be identified properly. please disconnect and re-connect ipod properly". i have done all it asks, and still nothing help.

    can anyone help me try to figure out whyall 3 of my devices jsut stopped beign acceptd on my itunes? ipod touch, nano 6th gen and ipad. none of them will be read on my itunes, yes i have uninstalled and re installed my itunes and plugged and unpluggd the devices and i have reset them numerous times. so what next?

    Doublechecking. In the course of your troubleshooting to date, have you worked through the following documents?
    iPod nano: Error message saying that iPod 'could not be identified properly'
    iOS: Device detected but not identified properly on iTunes for Windows

  • The driver detected a controller error on \Device\Harddisk2\DR2.

    Hello All,
    I've been seeing the above quoted error in my System Event logs on my HP G71 laptop.  Can someone tell me how to determine if that's the internal harddrive on my laptop or one of the two external Seagate drives I have connected?
    It appears several times a day, every day.
    Thanks!
    dawn

    First run the diagnostic test on the internal Hard Drive
    Shut down the computer if it is running.
    Press the power button to turn on the computer.
    Press f10 when the HP/Compaq logo displays.
    After the BIOS Setup Utility displays, use the Right Arrow key to select the Diagnostics menu.
    Select HDD Self-Test options.
    Press enter to display a list of HDD/Self-Test options.
    Select Notebook Hard Drive and then press f10 to display an Estimated test time.
    Press f10 to continue. The Hard Drive Self Test executes a Quick test, a Comprehensive test, and a SMART test.
    ||-Although I am working on behalf of HP, I am speaking for myself and not for HP.-||
    //Click on Kudos if my reply was helpful and answered your question//
    ||-If my answer solved the problem please mark the topic as the accepted solution-||

  • Just installed a new Airport Exteme.  Set up was no problem however we have  3 IPads and 1 Mac laptop and cannot get all devices to access Internet. Every reset of the airport gives a different combination of devices allowed access. Any ideas as to why?

    Just installed a new airpot extreme with a modem to use as a wireless system. Setup was successful however with 3 iPads and one laptop we cannot get all devices access to Internet. Each reset of airport extreme results in a different combination of devices that successfully connect. Any ideas as to why?

    Well, this is interesting,
    Let me tell you coulpe of things I noticed:
    - Are you using LEAP as the EAP method? some config examples illustrate configuriong using LEAP with WEP keys. Forget this and use WPA2-AES.
    http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00801c40b6.shtml
    - in some AP configurations (AP1 for example) I can see that:
    wlccp authentication-server client any method_Users
    This means that the wlccp client authentication will use the method called method_Users. Let us see what is configured with this method:
    aaa authentication login method_Users group Users
    This shows us that the method method_Users uses the server group named Users.
    let us see what is configured withe the group Users:
    aaa group server radius Users
    NOTHING!! it is empty!! so when a client tries to connect it will try to autheticate it against the radius server but the radius server group that it needs to check is empty.
    so I think you need to either use the correct method under which the server is configured with the wlccp statement. OR you need to configure the method_Users with correct user group that contains a server.
    Check and let me know if that works.
    Regards,
    Amjad

  • I cannot access my pictures. The error message reads "an error Was encountered on your sd card".  I've tried restarting the phone and taking sd card out.

    I Hope to not lose my information. Started out of the blue.

    HI BonsaiKo,
    Thank you for visiting Apple Support Communities.
    It sounds like the Chrome application is unresponsive on your Mac. The rainbow disc you see is called the "wait cursor," which spins when your computer is processing something.
    If the cursor does not stop spinning, you may have to force Chrome to quit using these steps:
    OS X: How to quit an unresponsive application using Force Quit
    Using the Force Quit feature of OS X makes an application close, even when it is not responsive.
    Important: Normally you should not need to force quit an app to close it. When an app is forced to quit, any unsaved changes to open documents are not saved, so try these methods to normally close the app first:
    Choose Quit from the app menu. For example, in Safari, choose Safari > Quit Safari.
    Choose Quit by right-clicking or control-clicking on an app's icon in the Dock.
    Thank you for participating in Apple Support Communities.
    Best Regards,
    Jeremy

  • Hyper-v replication Error Hyper-V received a digital certificate that is not valid from the Replica server 'burstingreplica'. Error: A required certificate is not within its validity period when verifying against the current system clock or the timestamp"

    Hi,
    When trying to initiate hyper-v replication from the main server i'm getting this error in the event logs.
    Hyper-V failed to enable replication for virtual machine 'RECADemo': A required certificate is not within its validity period when verifying against the current system clock or the timestamp in the signed file. (0x800B0101). (Virtual Machine ID 561591B6-567C-...)--I'm using certificate based auth and cert is installed/recognized on both machines.Please help.Thanks,Jaffer
    Jaf

    Hi,
    This error occurs because the Microsoft Certificate Trust List Publisher certificate expired. A copy of the CTL with an expired signing certificate exists in the CryptnetUrlCache
    folder. Please try to renew the Trust List Publisher certificate.
    The related KB:
    Event ID 4107 or Event ID 11 is logged in the Application log in Windows and in Windows Server
    http://support.microsoft.com/kb/2328240
    How to Renew the Site Server Signing Certificate (Microsoft Certificate Services)
    http://blogs.technet.com/b/configmgrteam/archive/2009/02/11/how-to-renew-the-site-server-signing-certificate-microsoft-certificate-services.aspx
    Manage Trusted Publishers
    http://technet.microsoft.com/en-us/library/cc733026.aspx
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Satellite P300-156 - driver detected controller error on \Device\Ide\IdePort1

    Hi
    I have recently installed a secondary hard drive in my P300-156 and am having some problems with it. I keep getting Event ID 11 in the system event log "The driver detected a controller error on \Device\Ide\IdePort1." and suffer with very bad performance with this drive.
    The drive is new and works fine in other systems and even works ok if I swap drive bays on my P300-156 but the problem with that is the drive does not fit in the other bay as it is quite thick. The drive in question is a Samsung HM100UI 2.5" 1TB Sata. I have also tried other drives in this bay and they work ok too.
    I am using windows 7 ultimate and Intel chipset drivers. It's an Intel ICH8M SATA AHCI controller, driver version 7.0.0.1013. Have tried different drivers and AHCI/IDE mode. Also tried a fresh installation and the problem persists.
    Am at a loss why this drive is having problems is there anything else someone can suggest to try?
    Thanks in advance.

    > {quote:title=peterk_1 wrote:}{quote}
    > Not all drive bays are made equal. The P500 second bay takes the "thicker" 2.5" drives.
    >
    > The current Intel chipset "driver" is v10. I have it installed BUT the installation if you want to do a complete install is not a simple task. If you download and unpack you can point the driver update to that location. Start at Intel.com
    Thanks!! This worked! It seems the Intel INF auto update utility didn't update them to the latest. I had to download the [RST and AHCI Driver and GUI|http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=20110&lang=eng] and manually search for new drivers in device manager. Now the drive is noticeably quicker and error free :)
    Thanks for all the help guys :)

Maybe you are looking for

  • Bug in Camera Raw

    I think this was introduced with ACR 6.6 RC ... but I'm not entirely sure, as the bug seems to be transient. The problem basically is, when adjusting an image in Camera Raw and hitting Ctrl+Z while the preview is zoomed in to 100 % view or larger the

  • Ipod classic 80gb wheel lags

    I have an ipod classic, 80gb,and when i scroll the whell up and down in volume, it is not as smooth as it is after a restart.Spesifically the wheel lags in volume. I have done the diagnostics test and it passed the test. And i have restore it many ti

  • Mail body invisible

    I've been using Mail for the last 4 months now and since recently the body of some emails (not all) are invisible to me in the preview as well as the full view. I connect to an exchange 2007 server and from time to time I get a message with an invisi

  • CAS servers became unresponsive while applying rollup 7

    When I applied rollup 7 to a CAS/Hub server, it became unresponsive for several minutes. Users in outlook were disconnected from their mailboxes, and some still hit the bad server on closing/reopening outlook. Is there an easy way to take a CAS serve

  • The page doesn't load!

    Hi!! When I go to the Adobe page that you download it from, the page doesn't load. What should I do?