An error was encountered performing this operation

A user with Full Control over their site is receiving this error when attempting to move a file between libraries that exist within the same site (using Content and Structure).
I am able to perform the same action with no issue (I am a site collection administrator).
I checked the logs and here is what I found:
ViewStateLog: Failed to write to the velocity cache... (EventID: ajb4s)
MoveItems: ReplaceLinksAndDelete could not find imported url for... (EventID: 7o9b)
Those are the only two errors that I get. Any help would be much appreciated.

It works fine when I do it. I am a site collection administrator.
That's a good sign, it means that we can troubleshoot the permissions further. Can you verify that the user that has "Full Control" has the checkbox in the Permission Level to "Manage Site Structure"? Also, do they have Full Owner rights on both of the Document
Libraries?
One main difference is that a Site Collection Admin will always have full access to everything within the Site Collection regardless of permissions. However, a Site Owner can be blocked from accessing specific features / lists / files.
Dimitri Ayrapetov (MCSE: SharePoint)

Similar Messages

An error was encountered performing the requested operation:

I frequently get this error while I initially open a connection and click on a table:
An error was encountered performing the requested operation:
Stream has already been closed
Vendor code 17027
I cannot see the columns information and have to refresh. After this error, if I switch to Data tab from the default Columns tab, I usually get another error that says:
Connection is currently busy. Try again?
[Try Again] [Abort]
I never had these errors using Toad for Oracle tool.
My environment:
Windows 7 64-bit with 16G RAM
Oracle Database 11g R2
Edited by: 恩承四季 on Jan 28, 2013 1:27 AM
Edited by: 恩承四季 on Jan 28, 2013 1:27 AM

Hi,
Vendor code 17027Searching the forum for that issue only yields hits for prior SQL Developer releases. Be aware that the release shipped with DB 11g is rather out-of-date so, if you haven't already downloaded and installed the latest release (3.2.20.09.87), I would recommend upgrading. Easiest is to select the 32-bit version with JDK included.
Regards,
Gary

An error was encountered performing the requested operation: Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor    Vendor code 12505

From sql developer I am trying to connect to database in my local machine. It shows the following below error. Any suggestions?
An error was encountered performing the requested operation:
Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
Vendor code 12505

lsnrctl results are as shown below
C:\Users\ndodd_000>lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 18-AUG-2013 17:40
:25
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date                18-AUG-2013 15:29:41
Uptime                    0 days 2 hr. 10 min. 50 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   C:\app\ndodd_000\product\11.2.0\dbhome_1\network\admin
\listener.ora
Listener Log File         c:\app\ndodd_000\diag\tnslsnr\Vamsi\listener\alert\log
.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "sysdba" has 1 instance(s).
Instance "sysdba", status READY, has 1 handler(s) for this service...
Service "sysdbaXDB" has 1 instance(s).
Instance "sysdba", status READY, has 1 handler(s) for this service...
The command completed successfully
lsnrctl service results
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 18-AUG-2013 17:
:20
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0
         LOCAL SERVER
Service "sysdba" has 1 instance(s).
Instance "sysdba", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:186 refused:0 state:ready
         LOCAL SERVER
Service "sysdbaXDB" has 1 instance(s).
Instance "sysdba", status READY, has 1 handler(s) for this service...
    Handler(s):
      "D000" established:0 refused:0 current:0 max:1022 state:ready
         DISPATCHER <machine: VAMSI, pid: 904>
         (ADDRESS=(PROTOCOL=tcp)(HOST=Vamsi)(PORT=49237))
The command completed successfully

Error message "An Error occurred while performing this operation" while opening a document.

Hi Adobe..
We are using Live cycle ES and ES2 for applying security on the document..
With latest Mozilla and Chrome versions and with Adobe reader XI, if we try opening a document, we happens to see the below error message..
Please advise us in getting this issue resolved...
Thanks.

To use XFA-based PDF forms on Firefox and Chrome, perform the following steps to configure Firefox and Chrome to open PDFs using Adobe Reader or Adobe Acrobat.
Firefox configuration:
1) Tools -> Options
2) Click Applications
3) In the Applications tab, type PDF in the search field.
4) For Portable Document Format (PDF) content type in the search result, select Use Adobe Acrobat (in Firefox) from the
Action drop-down list
Click OK and restart firefox.
Chrome configuration:
1) In Chrome, go to chrome://plugins/.
2) Click Disable under Chrome PDF Viewer, and click Enable under Adobe PDF Plug-In.
probably this would resolve the issue.
Thanks
Shivam

When trying to apply a Policy, Get Error: An error occurred while performing this operation. contact an administor if this problem continues

I have just installed ES4 LC with only the Rights Management Module. I have everything setup and can access the Policy server from Acrobat pro XI and can see and create policies.
however when trying to apply any policy to my PDF I get the Error in the Subject line.
for all intents and purposes, the setup and configuration looks fine but I seem to be unable to get past the very last step and actually use the policies.
please can anyone help?

Try this:
Fix for Software Update
See Troubleshooting Automatic Software Update in Mac OS X.
Delete the following files:
/Library/Preferences/com.apple.SoftwareUpdate.plist
/Home/Library/Preferences/ByHost/com.apple.SoftwareUpdate.xxx.plist where "xxx" is a number.
/Home/Library/Caches/com.apple.SoftwareUpdate/ (delete entire folder)

Audition CS6 - "An error was encountered: Not enough memory to perform operation"

When I try to export my entire session using the "Multitrack Mixdown" I get this error message: "An error was encountered: Not enough memory to perform operation"
To give context:
• Audition CS6
• All other applications are closed
• 26 audio tracks
• Approx. 22 seconds long in total
• Average of 2 effects per track
• I've reinstalled the program twice now
My computer:
• iMac (2010)
• 3.4GHz Intel Core i7
• 16 GB 1333 MHz DDr3
• Flash and HDD storage (which are not full)
• OSX 10.8.2
If anyone can offer any advice, that would be great!
I have to get this done by this Monday (May 6, 2013).
So I really hope Audition won't fail me, since it has always been successul until now (which is why I'm stumped).

'Not enough memory' hasn't got anything to do with your HD, but the amount of RAM available to Audition at the time it needs it. All DAWs, to work efficiently and successfully, need most of the machine to be free from running other apps. The reason for this is simple; If another app trys to hog a machine that's running a process in real time, it inevitably hiccups the machine. And if this other app has reserved RAM addresses for its own use, they aren't available until it's stopped.
Typical nasties involve anti-virus software, and the machine doing things like repeatedly polling a wireless connection, but there are plenty more, and this applies equally to Macs and PCs.
So the 'update' you need to rectify most of these problems is one you have to carry out yourself. Audio editing is a bit of an oddball from this POV - you invariably need a very lightly loaded machine for it to be reliably successful. The machine I use as a DAW doesn't do anything else at all; all unnecessary services are stopped whilst it's in this mode, and the physical spec of it is similar to yours - except it's a PC running W7-64Pro.

In printer services error message says "unable to perform this operation"

when I try to check my ink levels in the printer services area, an error message comes up "unable to perform this operation"
I have deleted and reinstalled my printer. I have downloaded the lastest driver--all to no avail

Please read this post then provide some details. What printer model? What operating system?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Can't do online banking. Get error message. "The requested URL /Summary.cgi was not found on this server. Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.

I can't do online banking. When I try to open the page I get error "The requested URL /Summary.cgi was not found on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.

Hi,
These blog posts might help debug problem
Oracle APEX: Got a 404 Not Found? | Inside Oracle APEX by Patrick Wolf
daust_de :: Oracle XE / APEX: Troubleshooting the 404-not found error on XE
Regards,
Jari

When I try to sync my IPOD (3rd gen) on ITunes, I receive the following error message - you don't have enough access permissions to perform this operation

When I try to sync my IPOD (3rd gen) on ITunes, I receive the following error message - you don't have enough access permissions to perform this operation..can anyone assist?

See:
iPhone - not enough access privileges: Apple Support Communities

I get an error message that you can't perform this operation

My client gets an error message that "You can't perform this operation on this page now because someone (me) is currently editing or reviewing it." But I'm not. What is going wrong?

Please ask your client to clear Contribute preference once and try the same scenario.
Here are the steps how to clear the Contribute Preferences:
For Mac, Contribute CS5
1) Quit Contribute.
2) (a) Go to "user/Library/Preferences" and delete the file "Adobe Contribute 6 Preferences".
(b) Go to "user/Library/Application Support/Adobe/" remove "Contribute CS5".
For Mac, Contribute CS4
1) Quit Contribute.
2) (a) Go to "user/Library/Preferences" and delete the file "Adobe Contribute 5 Preferences".
(b) Go to "user/Library/Application Support/Adobe/" remove "Contribute CS4".
If you use CS3, then delete "Adobe Contribute 4.1 Preferences" and "Contribute CS3" folder.
For Win, Contribute CS5
1) Quit Contribute.
2) From Command prompt run the below two commands to remove the preferences
a) reg delete "HKCU\Software\Adobe\Contribute 6" /f
b) RD /S /Q "%Userprofile%\Local Settings\Application Data\Adobe\Contribute CS5"
For Win, Contribute CS4
1) Quit Contribute.
2) From Command prompt run the below two commands to remove the preferences
a) reg delete "HKCU\Software\Adobe\Contribute 5" /f
b) RD /S /Q "%Userprofile%\Local Settings\Application Data\Adobe\Contribute CS4"
For CS3
a) reg delete "HKCU\Software\Adobe\Contribute 4.1" /f
b) RD /S /Q "%Userprofile%\Local Settings\Application Data\Adobe\Contribute CS3"
Note: when you clear the preference all the existing connections will be lost. The connections needs to be recreated.
Hope this helps you.

"changes to the distribution list membership cannot be saved. you do not have sufficient permission to perform this operation on this object"

Running Exchange 2010/latest updates on Windows 2008 R2 servers.
When I create a new DL that I want someone to manage, they received the following message when trying to add/remove from the DL:
"changes to the distribution list membership cannot be saved. you do not have sufficient permission to perform this operation on this object"
I have followed everything in "http://msexchangeteam.com/archive/2009/11/18/453251.aspx" with no luck
Any suggestions?

Piggybacking off of the discussion above, with our deployment of Exchange 2007, we created a set of web-based tools that allowed people to create Exchange Resources including distribution lists. To allow multiple people to manage the lists for a given
department, we programmatically created a group, which is populated with one or more users from the "resource department". We then set the following AD permissions to allow members of the group to manage membership of departmental distribution lists:
Add-ADPermission -User DepartmentalGroup -AccessRights ReadProperty, WriteProperty -Properties 'Member' -DomainController dc.contoso.com
Fast forward to Exchange 2010 and the landscape has changed with Exchange 2010's implementation of Role Based Access Control and I'm struggling to come up with a way to programmatically allow a group of users to manage distribution list membership for a
subset of distribution lists - note that we have approximately 75 departments, with each having its own set of coordinators who should be able to manage distribution lists for their department but not lists created by other departments. The specific
error we receive in Outlook when attempting to modify group membership is the same as the title of this thread - "Changes to the distribution list membership cannot be saved. You do not have sufficient permission to perform this operation on this object".
I implemented the settings referred to at
http://sysadmin-talk.org/2010/06/omg-allowing-end-users-to-manage-distribution-group-membership-in-exchange-2010-2/ which details the process of creating a new management role and revoking the role's ability to create new distribution lists and remove distribution
lists (which we want because we want those actions to be performed using our web tools).
All that to say that the ultimate problem we have is that the above relies on the "ManagedBy" field of a distribution list (viewable by Get-DistributionList Listname | fl *ManagedBy*) to determine group ownership. When "ManagedBy" is set to a user,
the user CAN edit a distribution list's membership from Outlook and OWA. When "ManagedBy" is set to a group, members of the group are UNABLE to edit the membership of the distribution list via Outlook or Outlook Web Access/ECP. Furthermore,
Set-DistributionGroup does not allow you to specify a list of users to assign to the ManagedBy field. However, if "ManagedBy" was set to a specific user and that user logs in to the Exchange Control Panel and adds additional "owners" of the distribution
list, which I can then see from EMS - both the original owner and any additional owners added can in turn modify group membership for the list using Outlook or Outlook Web Access/ECP.
My questions:
1) Is it "expected" behavior that while I can assign a group to the "ManagedBy" property of distribution list, members of that group are still unable to edit the group membership? ...or is there a fix for the behavior I'm seeing?
2) Can multiple values be assigned to the "ManagedBy" property when using Set-DistributionList - ex: Set-DistributionList DLName -ManagedBy:user1,user2
3) Any other suggestions?
Thanks,
-Lance

The permissions granted to user '' are insufficient for performing this operation. (rsAccessDenied)

when I try to connect to the "http://localhost:8080/ReportServer " I get this error.
The permissions granted to user 'DOMAIN/USERNAME' are insufficient for performing this operation. (rsAccessDenied).
I have configered the Reporting services Configuration manager.
I am an administrator on my machine and on the reportserver DB. when I try to log on the my 2008 R2 reporting services I get a simalar error.
does any one have an idea of what I am missing?
thank you.
Jeff
Jeff

Hi There
Please also have a look on this thread
http://tanveeronline.blogspot.co.nz/2011/07/ssrs-2008-r2-unable-to-connect-to.html
http://social.msdn.microsoft.com/Forums/hu-HU/sqlreportingservices/thread/f8a0a3f5-3985-4356-8404-3b408f790747
http://www.networksteve.com/enterprise/topic.php?TopicId=24217
In the last section of this thread it get resolved by
"Changing the ports. Configured TCP port to 9000 and SSL port to 9001.
And then
<Add Key="SecureConnectionLevel" Value="0"/>
Its value was 2, changed it to 0."
Please have alook on this thread that might help you
Many thanks
Syed
http://tanveeronline.blogspot.co.nz/2011/07/ssrs-2008-r2-unable-to-connect-to.html
Does not work. I already had the settings which are mentioned in that blog -
Try doing the following things
Go to Reporting Services Conf. Manager.
1. Change the server account to local account.
2. Remove the SSL if configured.
3. Go to C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer
4. Change the SecureConnectionLevel value to 0 in rsreportserver.config
Try refreshing the page, it should work now!
Also tried answer at - http://social.msdn.microsoft.com/Forums/sqlserver/en-US/f8a0a3f5-3985-4356-8404-3b408f790747/ssrs-2008-unable-to-connect-to-remote-server?forum=sqlreportingservices
Same thing there. SecureConnectionLevel value to 0 is already set for me.
Third link comment at end says -
Hi Chaitanya, Changing the ports worked for me. Configured TCP port to 9000 and SSL port to 9001. And then <Add Key="SecureConnectionLevel"
Value="0"/> Its value was 2, changed it to 0. Thanks for all your support Best Regards, Arka Mitra.
You can set TCP and SSL like this from Reporting services config manager -
Web Service URL option (left pane) > Advanced settings button > put the values.
The TCP can be changged to 9000, but the SSL requires a certificate file. I am stuck here.
The clue to make your own SSL certificate is here -
http://johnhennesey.blogspot.com/2010/10/reporting-services-2008-over-ssl.html
But, this post is not for windows 7 64 bit, ie my personal pc os. I tried to make the cert on win, 7, but options are complicated. Lets see.
Here is the issue for the same - https://stackoverflow.com/questions/22314341/cannot-see-self-created-certificate-in-certmanager

Adobe reader iOS app error "A system error was encountered."

Hello everyone,
I am using Adobe Reader app for my iOS device. The app is throwing an error "A system error was encountered." whenever I highlight any word/sentences in the pdf file and the pdf file closes automatically and all the highlights/strikeouts/annotations are lost. This usually happens when I try to switch in between the apps (multitasking). The same thing is happening on both the devices (iPad and iPhone).
Thanks.

Hi Fzaver,
We are sorry for late reply.
Ideally it should not happen. Could you please send one of such document(if possible) at adobereader-iosatadobe.com to investigate the issue and the steps which you are performing to encounter the issue.
Thanks
-Adobe Reader team

The current user has insufficient permissions to perform this operation when trying to add Term stored managed navigation.

Hi,
i am getting this error "The current user has insufficient permissions to perform this operation." when trying to add the Term store managed navigation like the following screen shot. i am the Farm
administrator and as well managed services account. also noticed, cannot delete the service application, saying you don't have enough permission to delete the db. but using this account i was able to do everything before in my environment. is anyone already
face this kind of error, so what will be the way to resolve this?
Appreciated!

event though its a farm admin,It should provide the access to MMS.please find the below link for more details and the solution for the issue.
Go to SharePoint Central Administration Site –> Application Management –> [Service Applications] –> Manage service applications
2.   Highlight the Managed Metadata Service that your web application is associated with. (Do not click on the link, just click somewhere else on that row to highlight it)
3.   Click on Permissions button in the ribbon area.
4.   Add the application pool account used by your web application and give it ‘full Access to Term Store’
5.   Click OK.
http://expertsharepoint.blogspot.de/2014/08/managed-metadata-service-or-connection.html
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

Insufficient permissions for performing this operation through Windows Form application.

When accessing a report through the browser the user can view the report, however, have a report viewer in a Windows Form application get the below error when loading the report:
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.Web.Services.Protocols.SoapException: The permissions granted to user
'domain\username'
are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'domain\username' are insufficient for performing this operation.
   at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
   at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
   at ReportServer.ReportService.ReportingService2010.GetReportServerConfigInfo(Boolean ScaleOut)
   at ReportServer.ReportItems.GetReportServerName()
   at Evolution2Application.FormMain.treeViewEvolutionReports_AfterSelect(Object sender, TreeViewEventArgs e)
   at System.Windows.Forms.TreeView.OnAfterSelect(TreeViewEventArgs e)
   at System.Windows.Forms.TreeView.TvnSelected(NMTREEVIEW* nmtv)
   at System.Windows.Forms.TreeView.WmNotify(Message& m)
   at System.Windows.Forms.TreeView.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
C# code I use to connect to the reporting service
ReportingService2010
rs =newReportingService2010();
rs.Credentials
=System.Net.CredentialCache.DefaultCredentials;
rs.Url
=http://sqlserver01/reportserver/reportservice2010.asmx;
Can someone explain what I need to do to prevent getting this error, the user has ContentManager rights on the server through a security group.

found the issue rs.GetConfigInfo(false) was causing the error, now removed this.

An error was encountered performing this operation

Similar Messages

Maybe you are looking for