An error was encountered while processing images.  An error was encountered while flattening transpa

I've looked around on the internet for a solution for this, but I'm finding no answers that help.
I keep getting the following errors in Acrobat Pro 9.3 when trying to use the pdf optimizer. It's driving me nuts. I'm trying to compress an Indesign CS5 generated pdf. It contains transparent objects, and all the images are .ai files.
If I leave the transparency box unchecked I immediately get this error:
An error was encountered while processing images.
If I check Transparency, it shows the little loading bar, as usual, and then when that's done I get this:
An error was encountered while flattening transparent objects.
The most annoying part of this, is that I've been using this same file for months now. Every so often the disclosures on it get updated, and I make the edits in Indesign, export, add form fields, and compress using pdf optimizer. Why all of a sudden is it grumpy? Is this a CS5 issue, because this form may not have been updated since I upgraded to CS5 from CS4?
I've tried swapping out the .ai files with newly saved CS5 versions. I've tried flattening layers pre-export. I cannot remove transparency, so that's not an option. But, as a test I removed all images before export and the pdf compressed fine. Any ideas? There's no broken links or anything in the Indesign file.

I had the same problem - a pdf created by CS5.5 suddenly could not be optimised - I was cropping the pdf (to get rid of trim marks) first before optimising and this threw up the error message "An error was encountered while flattening transparency"  I then optimised first before cropping the pdf and this seemed to get around this problem.
Hope this helps.

Similar Messages

  • An error was encountered while processing images

    Huge document, full of pictures and graphics. Created in Word for Mac 2011. Saved as pdf it's 38M.
    When I try to reduce the size, I get an error, "An error was encountered while processing images".
    No other info. Any clues?

    It would help to know what version of Acrobat. However, the better way is to probably work with the WORD file first. You might want to work on a copy so that you don't mess up the original. If you select a graphic in WORD, go to the format tab and select Compress Pictures. You might select the options and use 150 ppi or the 220. Many people use graphics with dpi in the thousands that the human eye can not see. You might also consider reducing the color depth from millions to 256 colors, or even 16 colors if a simple line drawing or such (this would probably have to be done to the graphic itself). If you uncheck the button to apply to the selected item, then the change will be applied to all figures (other than the color depth that can not be done this way).
    Another item that makes a PDF huge are tags. Tags are good for accessibility or going back to WORD (not a good idea in general), but take a lot of space. For the smallest reasonable PDF print to the Adobe PDF printer (this will not create tags or bookmarks) with at least the Standard settings (not embedding fonts is typically a bad idea -- though you might want to be careful about using lots of different fonts in your DOC file). If you use PDF Maker (the Acrobat tab in WORD), you can set the preferences about tags and the level of bookmarking in the PDF. All of this can help in creating a reasonable size PDF. For such a large PDF, the print root might be best. If you are careful, there should be no need for 38M.

  • How can I resolve the Acrobat Conversion Warning: Error encountered while processing images?

    I'm using Acrobat XI, version 11.0.07
    I created a PDF from PowerPoint 2008, and I'm simply trying to reduce the file size of my PDF from 7MB. 
    In Acrobat, I've attempted both "File>Save As Other>Reduced Size PDF..." and "File>Save As Other>Optimized PDF..."
    On each attempt I received this Conversion Warning: "An error was encountered while processing images."
    I've come across many other people experiencing this issue, but I have yet to find a clear, successful solution.
    For example, I've seen the proposed solution "Advanced>Print Production>Flattener Preview", but I am not even seeing where to locate these menu options.
    I'd appreciate your help in resolving the issue.
    Thanks!

    Very frustrated with Acrobat.  I've received zero responses to my request for help using the online Adobe Community Forum.  I also just spent almost two hours using the online Chat with Adobe trying to resolve the issue.  Conclusion: No resolution.  I'm currently using a trial of Acrobat, and this experience leaves me no desire to purchase the software upon the trial's end.

  • Server was unable to process request. --- ERROR: This site is not hosted on this data center C#

    I am working with the API for the first time, and I am currently trying to figure out how to pull a list of products from a cat using the Product_ListRetrieve, I keep getting this error
    Server was unable to process request. ---> ERROR: This site is not hosted on this data center

    Okay so if anyone else is having these issues I found an answer for MVC3 C#:
    Go into the Web Config and look at the Application Settings, by editing the URL there you can find a value containing the service url. add the subdomain there:
    Example-
      <applicationSettings>
        <ITCatExtend.Properties.Settings>
          <setting name="ITCatExtend_CRM_CatalystCRMWebservice" serializeAs="String">
            <value>https://Add the Sub Domain Here.worldsecuresystems.com/CatalystWebService/CatalystCRMWebservice.asmx</value>
          </setting>
          <setting name="ITCatExtend_Ecom_CatalystEcommerceWebservice"
            serializeAs="String">
            <value>https://Add the Sub Domain Here.worldsecuresystems.com/catalystwebservice/catalystecommercewebservice.asmx</value>
          </setting>
        </ITCatExtend.Properties.Settings>
      </applicationSettings>

  • Claims authentication: "Server was unable to process request. --- Index was outside the bounds of the array"

    Hi there,
    I recently got a peculiar error when users tried to log-in into a SP 2010 portal using claims based authentication.
    The following error is logged in the event viewer of the SP server in question:
    Event ID 8306 - Claims authentication
    An exception occurred when trying to issue security token: Server was unable to process request. ---> Index was outside the bounds of the array.
    I also found an IIS warning entry with a similar message:
    Event ID 1309 - Web Event
    Exception type: FaultException
    Exception message: Server was unable to process request. ---> Index was outside the bounds of the array.
    I simply could not find an answer to why this happened, but an iisreset seemed to have fixed the issue. I was wondering if anyone here would know a possible root cause for this issue?
    Thanks in advance for your help.
    Regards,
    P.

    Hi,
    Thanks for posting your issue, Kindly browse below mentioned URLs to fix this issue
    http://underthehood.ironworks.com/2011/05/sharepoint-2010-an-exception-occurred-when-trying-to-issue-security-token-the-server-was-unable-to-p-1.html
    http://nearbaseline.com/blog/2011/01/claims-exception-occurred-issuing-a-security-token/
    I hope this is helpful to you, mark it as Helpful.
    If this works, Please mark it as Answered.
    Regards,
    Dharmendra Singh (MCPD-EA | MCTS)
    Blog : http://sharepoint-community.net/profile/DharmendraSingh

  • Internal error in R-tree processing: [Recursive fetch error]

    Hello,
    I seem to be getting an error when using any type of SDO function (SDO_RELATE, SDO_FILTER, SDO_ NN, ... ) on my spatially indexed data. The error I'm getting is this:
    ERROR at line 1:
    ORA-29903: error in executing ODCIIndexFetch() routine
    ORA-13236: internal error in R-tree processing: []
    ORA-13236: internal error in R-tree processing: [Recursive fetch error]
    The interesting part of this is that I only get this error if I insert more than 31 entries into the table. All the relevant code is posted below, what I do is create the table, then create the metadata from the sqlplus interface. After that I run a java program that does Clear() then Insert() then Create_Indices(). All these run just fine (at least run without telling me about any errors). But as soon as that is all done and I do an SDO query on the data, for example:
    SELECT location stop_range_poly_area
    FROM stops
    WHERE SDO_FILTER
    location,
    SDO_GEOMETRY
    2003, null, null,
    SDO_ELEM_INFO_ARRAY(1,1003,1),
    SDO_ORDINATE_ARRAY(300,300, 600,300, 600,600, 300,600, 300,300)
    ) = 'TRUE';
    I get the above mentioned error. But if I change my data so that it doesn't have more than 31 entries (doesn't matter which 31 entries, just so long as it doesn't exceed that number) that query (and all of my other SDO test queries on the stops table) seems to work just fine.
    Thanks for looking at this,
    Brad
    ---- SQLPLUS Code -----------------------------------------------------------------------------------------------------------
    CREATE TABLE stops
    stop_id VARCHAR2(4) PRIMARY KEY,
    address VARCHAR2(256),
    location sdo_geometry
    INSERT INTO user_sdo_geom_metadata VALUES
    'stops',
    'location',
    MDSYS.SDO_DIM_ARRAY
    MDSYS.SDO_DIM_ELEMENT('X', 0, 600, 0.005),
    MDSYS.SDO_DIM_ELEMENT('Y', 0, 800, 0.005)
    null
    ----- Java Code -----------------------------------------------------------------------------------------------------------------
    // Clear
    // Description:
    // This function clears all the data in the stop tables in the database
    // given in the connection.
    public static void Clear (Connection connection)
    Statement statement;
    try
    statement = connection.createStatement();
    statement.executeUpdate("DROP INDEX stops_index");
    statement.executeUpdate("DELETE stops");
    statement.close();
    catch (SQLException e)
    System.err.println("SQLExcpetion (Stop.Clear()): " + e.getMessage());
    // Create_Indices
    // Description:
    // Create indices for stops table
    public static void Create_Indices (Connection connection)
    Statement statement;
    String sql_query;
    sql_query = "CREATE INDEX stops_index ON stops(location) " +
    "INDEXTYPE IS MDSYS.SPATIAL_INDEX";
    try
    statement = connection.createStatement();
    statement.executeUpdate(sql_query);
    statement.close();
    catch (SQLException e)
    System.err.println("SQLExcpetion (Stop.Create_Indices()): " + e.getMessage());
    // Insert
    // Description:
    // This function inserts this object into the stops table in the database
    // given in the connection.
    public void Insert (Connection connection)
    Statement statement;
    String sql_query;
    sql_query = "INSERT INTO stops VALUES ('" +
    stop_id + "', '" +
    address + "', " +
    "sdo_geometry(2001, null, sdo_point_type(" +
    location.x + "," +
    location.y + ",null), null, null)" +
    try
    statement = connection.createStatement();
    statement.executeUpdate(sql_query);
    statement.close();
    catch (SQLException e)
    System.err.println("SQLException (Stop.Insert()):" + e.getMessage());
    Message was edited by: loos to include the changes proposed by the second poster.

    Hi,
    Thanks for trying but changing those items for the specific failing queries didn't seem to help. Though you do seem to be right about the internal/external polygon problem, so I changed it all my other queries to see if they would fail (that way things would at least be consistent), but it doesn't seem to make a difference. All my old failing quries still fail and my working ones still work. I also changed the co-ordinates as you specified and still have no changes (unless of course the results changed, but right now I'm just looking for queries that compile and run, the results don't matter yet).
    Maybe this will help, I'll give you guys both sets of data, one that works and one that doesn't and maybe you can see a problem in the data that I'm just missing or too ignorant to see. The data is simply comma seperated values that I parse into the required fields in the order (id, description, x, y).
    So far, the only reason I've been able to find that the non-working data doesn't work is because there are more than 31 rows. I started taking records out of the stops table in a binary search sort of pattern. If I take out stops 100-115 (resulting 29 records) all the queries work, if I take out stops 100-107 (resulting in 36 records) it doesn't work. If I take out 109-115 (resulting in 35 records) it doesn't work. If I take out 1-11 (resulting in 32 records) it doesn't work. If I take out 1-12 (resulting in 31 records) it does work. Here's a table
    Take out Stops ---- records left -- Works?
    s1-s11 ------------ 32 ------------ No
    s1-s12 ------------ 31 ------------ Yes
    s100-s115 --------- 29 ------------ Yes
    s100-s107 --------- 36 ------------ No
    s109-s115 --------- 35 ------------ No
    Thanks again for checking this out,
    Brad
    ------- Working Data ---------------------------------------------------------------------------------------
    (Student_id, Department, x, y)
    Student_1,Computer Science ,296,131
    Student_2,Social Science,130 ,279
    Student_3,Mechanical Engineering ,392,180
    Student_4,Electrical Engineering ,342,322
    Student_5,Computer Science ,165,490
    Student_6,Scicology ,393,533
    Student_7,Physical Therapy ,590,616
    Student_8,Civil Engineering ,165,640
    Student_9,English ,360,412
    Student_10,Economy ,89,32
    Student_11,Computer Science ,26,117
    Student_12,Social Science,430 ,291
    Student_13,Mechanical Engineering ,382,80
    Student_14,Electrical Engineering ,542,222
    Student_15,Computer Science ,154,290
    Student_16,Scicology ,493,323
    Student_17,Physical Therapy ,290,426
    Student_18,Civil Engineering ,65,230
    Student_19,English ,300,412
    Student_20,Economy ,44,292
    Student_21,Computer Science ,146,431
    Student_22,Social Science,405 ,179
    Student_23,Mechanical Engineering ,192,480
    Student_24,Electrical Engineering ,412,202
    Student_25,Computer Science ,265,49
    Student_26,Scicology ,33,273
    Student_27,Physical Therapy ,186,216
    Student_28,Civil Engineering ,365,600
    Student_29,English ,309,42
    Student_30,Economy ,415,392
    ------- Non Working Data ---------------------------------------------------------------------------------
    (Stop_id, Address, x, y)
    s1, 2341 Portland,377,64
    s2, 24th St. / Hoover St.,308,22
    s3, 2620 Monmouth Ave.,272,138
    s4, 2632 Ellendale Pl.,128,110
    s5, 2726 Menlo Ave.,85,231
    s6, 2758 Menlo Ave.,84,124
    s7, 28th St. / Orchard Ave.,183,236
    s8, 28th St. / University Ave.,414,308
    s9, 30th St. / University Ave.,391,352
    s11, 34th St. / McClintock St.,180,458
    s12, 36th Pl. / Watt Way,176,622
    s13, Adams Blvd. / Magnolia Ave.,218,87
    s14, BG Mills Apts.,23,637
    s15, Cardinal Gardens Apts.,156,389
    s16, Centennial Apts.,373,126
    s17, Chez Ronee Apts.,446,414
    s18, City Park Apts.,70,323
    s19, Dental School,219,478
    s96, Founders Apts.,373,192
    s97, Hillview Apts.,412,214
    s98, House of Public Life,531,303
    s99, JEP,304,523
    s100, Kerchoff Apts.,473,272
    s101, Leavey Library,370,559
    s103, McClintock St. / Childs Way,129,553
    s104, Mt. St. Marys College,565,127
    s105, Pacific Apts.,398,240
    s107, Parking Center,525,652
    s109, Parkside,78,651
    s110, Severance St. / Adams Blvd.,435,202
    s111, Research Annex,492,776
    s112, Sierra Apts.,352,230
    s113, Sunset Apts.,267,278
    s114, Terrace Apts.,156,280
    s115, Troy East Apts.,402,397
    s116, University Regents Apts.,182,181
    s117, Watt Way / 36th Pl.,176,622
    s119, Watt Way / Bloom Walk,158,653
    s120, Windsor Apts.,257,236
    s121, Zemeckis Center,476,474
    s137, Gate #2,321,715
    s138, 24th St. / Toberman St.,377,64

  • "DD8x". Error message for loading process:Operating system error !

    Using the OLE command I receive the following error:
    Cannot load the file "File Name" with the loading process "DD8x". Error message for loading process:
    Operating system error <> !
    strCommand ="DATAFILEIMPORT('J:\ctf\GM\040119-2\dat7.dat','',0)"
    lsuccess = IDIACommand.CmdExecuteSync(strCommand)
    I get the same error with the "DataLoadHdFile" command.
    After the error happens, I cannot load any files in the directory until I
    reboot DIAdem.

    Hi punkmonkey,
    I'm curious why you compare the results of the "DataLoadHdFile" command with that of the "DataFileImport" command. The former is a time-honored DAT-file-specific command for only reading the header file contents-- NOT the data, and the latter is a brand new DIAdem 9.0 function for loading all sorts of data files-- TDM files included.
    If you want to load a DAT file using an OLE command, why don't you try the time-honored "DataLoad" command, which is specifically designed for loading DAT files? The "DataLoadHdFile" command is really only used to do selective loading (specific channels or rows) of part of a DAT file. Do you want to load selectively, or do you want to load all the channels from the DAT file?
    When you get the same error with
    the "DataLoadHdFile" command, are you executing that command also through OLE automation, or directly in DIAdem? What happens if you try both the "DataLoadHdFile" and the "DataFileImport" commands directly from DIAdem (no OLE)?
    Brad Turpin
    DIAdem Product Support Engineer
    National Instruments

  • Problem : Application run out of memory while processing image I/O.

    Hi,
    I have coded an application (utility) for creating scaled (JPEG) images (thumb nails) and writing (saving) them to files. I tried this with both imageio package of jdk1.4 and com.sun.image.codec.jpeg.* classes of earlier version. Application works with both versions but when I execute it for more (say more than 10 images) images, system becomes very slow and application starts throwing a memory related (OutOfMemoryError) error. Is it that objects of java image related classes consume too much memory ? How to solve this problem ? (My system run P4 processor with 256 MB RAM).
    Awaiting solution,
    Thanx and regards,
    IB

    So I am not alone in this...
    I wrote the jpeg thumbnail generating code over a year ago and now when I am ready to use it in the finished app. I noticed that each process (as monitored using Forte 3's execution window) that instantiates a new ImageIcon object is never killed by the JVM. As more and more processes are started for distinct tasks they build up endlessly. Here's the method which is almost identical to the test code provided in sun's tutorial for generating thumbnails from jpeg and gif image files (http://developer.java.sun.com/developer/TechTips/1999/tt1021.html) :
    public boolean createThumbImage(int maxDim) throws EntegraEntityException {
         * Reads an image in a file and creates
         * a thumbnail in another file.
         * @param this.getImagePath() The name of image file.
         * @param thumb The name of thumbnail file. 
         * Will be created if necessary.
         * @param maxDim The width and height of
         * the thumbnail must
         * be maxDim pixels or less.
           String thumbsource =  this.path + this.filename;
           String thumbdest = this.path + "thumbs_" + maxDim + File.separator/*"\\"*/ + Utilities.replaceString(Utilities.replaceString(this.filename," ","_","ALL").trim(),"[.][a-zA-Z]*",".jpg","ALL");
       //  System.out.println("thumbsource in createthumbimage(): " + thumbsource + "\n");
       //  System.out.println("thumbdest in createthumbimage(): " + thumbdest + "\n");
            try {
                // Get the image from a file.
                java.awt.Image inImage = new ImageIcon (thumbsource).getImage();
                // Determine the scale.
             double scale = (double)maxDim/(double)inImage.getHeight(null);
                if (inImage.getWidth(null) > inImage.getHeight(null)) {
                    scale = (double)maxDim/(double)inImage.getWidth(null);
                // Determine size of new image.
                //One of them
                // should equal maxDim.
                int scaledW = (int)(scale*inImage.getWidth(null));
                int scaledH = (int)(scale*inImage.getHeight(null));
                // Create an image buffer in
                //which to paint on.
                BufferedImage outImage =
                  new BufferedImage(scaledW, scaledH,
                    BufferedImage.TYPE_INT_RGB);
                // Set the scale.
                AffineTransform tx =
                  new AffineTransform();
                // If the image is smaller than
                //the desired image size,
                // don't bother scaling.
                if (scale < 1.0d) {
                    tx.scale(scale, scale);
                // Paint image.
                Graphics2D g2d =
                 outImage.createGraphics();
                g2d.drawImage(inImage, tx, null);
                g2d.dispose();
                // JPEG-encode the image
                //and write to file.
                Utilities.fileMakeDirs(this.path + "thumbs_" + maxDim + File.separator/*"\\"*/);
                Utilities.fileMakeFile(thumbdest);
                OutputStream os =
                 new FileOutputStream(thumbdest);
                JPEGImageEncoder encoder = JPEGCodec.createJPEGEncoder(os);
                encoder.encode(outImage);
                os.close();
                return true;
            } catch (IOException e) {
                throw new EntegraEntityException("IO exception creating thumbnail for Image object ID: " + this.getId() + " ::",e);
            } catch (EntegraFileIOException fi) {
                throw new EntegraEntityException("File IO exception creating thumbnail for Image object ID: " + this.getId() + " ::",fi);
        //    return false; //Never reached. Since it doesn't live in the "try" block but must be here to ensure method body gets a return value.
    }:During my troubleshooting of the method execution yesterday I discovered that the stuck process only occurs as a consequence of the line shown in bold below :
    java.awt.Image inImage = new ImageIcon (thumbsource).getImage();
    :this indicates to me that there is something wrong with how either the Image object or the ImageIcon file resources are allocated. At first I tried using the "flush()" method of the java.awt.Image class to release the resources to no avail, later I was able to confirm that the error does not occur for the default constructor of ImageIcon only for the one that specifies the source path (as shown in the line above) this indicates that a fileIO stream is being created and probably not being released inside ImageIcon or Image, but since that stream is probably private to those core classes we can't access it to close() it properly. I sure hope I am wrong on this or there is an alternative to using these classes..
    Please let me know if any of you have other ideas on how to quash this bug or can otherwise find flaws in my logic for it's occurance.
    Regards,
    Sent2null

  • No reconciler was available to process the request.- error

    I was having a problem with reconciliation so I deleted the task and source adapter tasks. When I now attempt incremental reconciliation I know get this error. What do I do now?

    Hi,
    Something similar happened to me, recons didn't work first due to no recon availables and later due to a forever pending state.
    ... restarted App Server but Reconciliation Task status shows as 'finished' and no reconciler was available to process a
    recon request. In that situation it's possible to do a manual start of the task through lh console (startTask Reconcile
    "Reconciler your.hostname"), but reconciliations keep in pending state for ever. I tried to import Recon Tasks as ankushkapoor
    suggests, but didn't work. What finally broke my configuration was a commented /etc/hosts line related to the hostname of IDM
    when it was installed.
    Uncommenting that line and restarting de App Server made recons work again.
    Pablo C.

  • Error message Acrobat 9 pro, 'An Error was encountered while processing images'

    I receive this error message when attempting to save as a compressed/optimized pdf The PDF that is 1400+ pages btw.

    Yes it is up to date. Trying to save as an optimized PDF and it just keeps giving the error message. I have tried to change the settings in preflight and other areas but have not had success.

  • A critical error has occured. Processing of the service was terminated. Unsaved data has been lost.

    Dear Team,
    I am facing one issue in ESS, in that only one service(Employee Search) showing critical error.
    Please check attachment once
    Thanks,
    Srinivas

    Hi Srivas,
    And also ask your portal consultant to check the RFC destinations was created or not and also check the ping test for RFC.
    Regards,
    Anil

  • While processing C015 - Getting Error 'Reservation 000005089 is already being Processed "

    Hello,
    I have created a customized Program script which will process  MB1A , MIGO and CO15 simultaneously
    MB1A - using BAPI
    MIGO and CO15 using BADI
    When i process for few records everything works fine. But when i process for 2000 records , after processing i am getting error at C015  "Reservation 000005089 is already being Processed".
    I tried with wait time up to 8 seconds after MB1A , still i am getting same error.
    Can any one suggest how to fix the issue.
    BR,
    Murali

    Hi Murali,
    do a wait loop before calling CO15 like:
    locked = 'X'.
    do.
        wait up to 5 seconds.
        CALL FUNCTION 'ENQUEUE_EMRKPF'
          EXPORTING  RSNUM = your_rsnum
                     X_RSNUM = 'X'                                     
          EXCEPTIONS FOREIGN_LOCK     = 2
                     SYSTEM_FAILURE   = 3.
        if  sy-subrc                 EQ 0.
          clear                         locked.
          CALL FUNCTION 'DEQUEUE_EMMKPF'.
          exit.
        endif.
    enddo.
    Regards,
    Klaus

  • While processing a message : Error HTTP 404: not found

    Hi gurus,
    I'm stuck on a File-XI-IDoc scenario.
    Here is the message i get in the Message Tool Display:
    Erreur lors de la transmission du message au point d'accès http://rchase12:53000/sap/xi/engine?type=entry via la connexion File_http://sap.com/xi/XI/System. Motif : com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 404 : Not Found
    It's in French but it it's like my url is not good. I read about the port that must be 80xx in place of 53000 is it true?? I can't find any information about it, in another place than some forum topics.
    Could anyone help me?
    Thanks in advance.
    Thomas

    Hi,
    Description: The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address. This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable.
    Possible Tips:- for HTTP_RESP_STATUS_CODE_NOT_OK 404
    u2022 404 is an HTTP response code that indicates that the resource in question couldn't be found. Usually this is due to an incorrect URL, so it is better to cross check all URLs. Check pipeline URL in the SLD in the business system of the Integration Server For this go to SLD->Business System-><yourIntegrtaion Server>->Pipeline URL: It should be like this http://<host>:<port>/sap/xi/engine?type=entry Where host is the host name of the Integration Server and port is the HTTP(8xxx) port. To verify this in Integration Server you can do like this. Go to SXMB_ADM->Integration Engine Configuration->Choose Edit from Menu -> Change Global Configuration Data to switch to change mode. Then select System Landscape - Load Configuration. (This is not required always)
    u2022 Check that the port really is the ICM HTTP Port and not the J2EE port i.e SMICM then menu GOTO --> SERVICES and check the port number for HTTP. It should be HTTP port
    u2022 If the error is Page cannot be displayed, cannot find server in https configurations Check and correct the SSL configuration for the ABAP and the J2EE side of the system
    u2022 If the error is because of integration server when using Proxy communications then check these. i.e SXMB_ADM->Integration Engine Configuration->Corresponding Integration Server enrty should be dest://<Http Integration server-Destination> Where < Http Integration server -Destination > is the RFC destination (SM59) of type HTTP connection (type H) to the Integration Server. In this case, host name, port, and path prefix are saved in the RFC destination.
    Regards,
    Shabari

  • Mobile IM "The system was unable to process your order" error

    I have a LG VX8560 Chocolate 3 with unlimited Text Messaging. is there a fix?

    You can login with every local admin account in the admin-group. These admin accounts have to be created before the VMware-Server was installed. If you want to add further admin accounts after the VMserver-inst, you have to manually add them to the __vmware__ group.

  • Nw BPM error : JPR could not process the message error whie processing the request

    Hi All,
    I am trying to implement the new NW BPM Scenario(I am fallowing the Williams Document as it is), When I try to trigger the message it's getting failed at BPM XI channel level , this is the below error .
    Delivery of the message to the application using connection JPR failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing inbound message. Exception: Error while proecessing request. Setting message to status failed
    "System Error Received. HTTP Status Code = 200: However System Error received in payload ErrorCode = GENERAL ErrorCategory = XIAdapterFramework Parameter1 =   Parameter2 =   Parameter3 =   Parameter4 =   Additional text = com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing inbound message. Exception: Error while proecessing request ErrorStack =  "
    Kindly Help Me out from this error.
    Thanks
    Prasad

    I have solved the above error by mistake i have used sync mode in sender communication channel.
    Now my message is going inside the BPM, but unfortunately i am getting another error:

Maybe you are looking for