An exception of class nilobjectexception was not handled (Photoreflect)

Trying to download photos via Photoreflect.com photo publisher. As soon as I get ready to add photos to a gallery I get a pop up "An exception of class nilobjectexception was not handled. The application must shut down." Tried restart of the computer. Uninstalled and reinstalled the publisher, deleted the Pub data settings file. Still won't work. Thanks in advance for any ideas.
Rich

Contact the developer of photoreflect as there is a problem with their code. There may be an update for their application.

Similar Messages

An exception of class NilObjectException was not handled. The application must shutdown.

I just upgraded to Lion last night. Today I purchased ScholarWord OSX, downloaded it now and I can't open it. It was previously working with the demo. I continue to receive the Nil error above. How do I resolve this?

Welcome to my world of pain. I also have osx lion and after a good trial with the scholarword, I purchased the PRO version and it will not work. I get the NOE notice...
After several pleas to the tech support dept, they finally responded. (Had to prompt them into action by leaving a voice mail on CEO phone line) They asked one question..."was I correctly inputting the serial/reg. #?". I quickly answered yes and their next email trouble shooting bit of expertise was to offer a refund. What??? I just want the thing to work. I cannot understand how their entire trouble shooting chain consists of one simple question, then they throw up their hands and offer a refund.
Soooo sad with this outcome. Anybody have a solution? My goal was to get a good APA software tool that is good with MAC.
-Gary

SMBup quit. "An exception of class JSONException was not handled. The application must shut down. Exception Message: Parse Error: Expecting "{" or "[" at position 1. Exception Error Number: 1

After updating to Mavericks 10.9.2, our Canon printer would no longer scan & send to our iMacs & MacBook Pros. We downloaded & installed SMBUp. Still trying to get it to work with MacBookPros, but has been working with iMacs. Today, out of the blue, I got the following error message:
An exception of class JSONException was not handled. The application must shut down.
Exception Message: Parse Error: Expecting "{" or "[" at position 1
Exception Error Number : 1
Now I get that message every time I try to open SMBUp. Tried to download & reinstall application, but get this message on website:
Hmm, eduo.info isn't loading right now.
The servers that run eduo.info are having some trouble. This is usually just a tempoary problem, so you might want to try again in a few minutes.
(Have gotten that message for the last hour).
Help?

Hi,
Pls don't forget to reward points and close the question if you find the answers useful.
Eddy

An exception of class OutOfBounds Exception was not handled

When starting a vodafone application for my Merlin 3g card I get a failure message: "An exception of class OutOfBounds Exception was not handled. Application must shut down"
I unintentionally deleted an info.plist file when trying to get rid of Apple´s latest WWAN update. Could this be the reason? And how to get back the info.plist file?
Thank you
MacBookPro Mac OS X (10.4.8)

I finally managed to find an Info.plist on the web. I managed to copy it to the IOSerialFamily.kext file and restarted.
Upon startup I was told that the IOSerialFamily.kext was not installed correctly and cannot be used.
This is the content I used:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>CFBundleDevelopmentRegion</key>
<string>English</string>
<key>CFBundleExecutable</key>
<string>IOSerialFamily</string>
<key>CFBundleGetInfoString</key>
<string>Apple Computer, Inc 2005-01-12 IOKit Serial Port Family</string>
<key>CFBundleIdentifier</key>
<string>com.apple.iokit.IOSerialFamily</string>
<key>CFBundleInfoDictionaryVersion</key>
<string>6.0</string>
<key>CFBundleName</key>
<string>IOKit Serial Port Family</string>
<key>CFBundlePackageType</key>
<string>KEXT</string>
<key>CFBundleShortVersionString</key>
<string>9.0</string>
<key>CFBundleSignature</key>
<string>????</string>
<key>CFBundleVersion</key>
<string>9.0.0d30</string>
<key>IOKitPersonalities</key>
<dict>
<key>IOSerialBSDClient</key>
<dict>
<key>CFBundleIdentifier</key>
<string>com.apple.iokit.IOSerialFamily</string>
<key>IOClass</key>
<string>IOSerialBSDClient</string>
<key>IOProbeScore</key>
<integer>1000</integer>
<key>IOProviderClass</key>
<string>IOSerialStream</string>
<key>IOResourceMatch</key>
<string>IOBSD</string>
</dict>
<key>IOSerialBSDClientSync</key>
<dict>
<key>CFBundleIdentifier</key>
<string>com.apple.iokit.IOSerialFamily</string>
<key>IOClass</key>
<string>IOSerialBSDClient</string>
<key>IOProbeScore</key>
<integer>1000</integer>
<key>IOProviderClass</key>
<string>IOSerialStreamSync</string>
<key>IOResourceMatch</key>
<string>IOBSD</string>
</dict>
</dict>
<key>OSBundleCompatibleVersion</key>
<string>1.0.4</string>
<key>OSBundleLibraries</key>
<dict>
<key>com.apple.kpi.bsd</key>
<string>8.0.0</string>
<key>com.apple.kpi.iokit</key>
<string>8.0.0</string>
<key>com.apple.kpi.libkern</key>
<string>8.0.0</string>
<key>com.apple.kpi.mach</key>
<string>8.0.0</string>
<key>com.apple.kpi.unsupported</key>
<string>8.0.0</string>
</dict>
</dict>
</plist>
Any help what I did possibly wrong?

CREATE OBJECT: The class CL_HRPA_INFOTYPE_0006_IN was not found., error key

Hi Experts,
    We are facing following problem in our ESS/MSS system. Request to suggest solution ASAP.
We are having EP7 and ECC6
*CREATE OBJECT: The class CL_HRPA_INFOTYPE_0006_IN was not found., error key: RFC_ERROR_SYSTEM_FAILURE*
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: CREATE OBJECT: The class CL_HRPA_INFOTYPE_0006_IN was not found., error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
     at com.sap.xss.hr.per.in.address.fc.FcPerAddressIN.readRecord(FcPerAddressIN.java:270)
     at com.sap.xss.hr.per.in.address.fc.wdp.InternalFcPerAddressIN.readRecord(InternalFcPerAddressIN.java:545)
     at com.sap.xss.hr.per.in.address.fc.FcPerAddressINInterface.readRecord(FcPerAddressINInterface.java:150)
     at com.sap.xss.hr.per.in.address.fc.wdp.InternalFcPerAddressINInterface.readRecord(InternalFcPerAddressINInterface.java:201)
     at com.sap.xss.hr.per.in.address.fc.wdp.InternalFcPerAddressINInterface$External.readRecord(InternalFcPerAddressINInterface.java:277)
     at com.sap.xss.hr.per.in.address.overview.VcPerAddressINOverview.onBeforeOutput(VcPerAddressINOverview.java:267)
     at com.sap.xss.hr.per.in.address.overview.wdp.InternalVcPerAddressINOverview.onBeforeOutput(InternalVcPerAddressINOverview.java:250)
     at com.sap.xss.hr.per.in.address.overview.VcPerAddressINOverviewInterface.onBeforeOutput(VcPerAddressINOverviewInterface.java:158)
     at com.sap.xss.hr.per.in.address.overview.wdp.InternalVcPerAddressINOverviewInterface.onBeforeOutput(InternalVcPerAddressINOverviewInterface.java:140)
     at com.sap.xss.hr.per.in.address.overview.wdp.InternalVcPerAddressINOverviewInterface$External.onBeforeOutput(InternalVcPerAddressINOverviewInterface.java:224)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.callOnBeforeOutput(FPMComponent.java:603)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:569)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:291)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:220)
     at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1288)
     at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:355)
     at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:548)
     at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:592)
     at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:864)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:684)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1060)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Caused by: com.sap.aii.proxy.framework.core.BaseProxyException: CREATE OBJECT: The class CL_HRPA_INFOTYPE_0006_IN was not found., error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
     at com.sap.xss.hr.per.in.address.model.HRXSS_PER_P0006_IN.hrxss_Per_Read_P0006_In(HRXSS_PER_P0006_IN.java:218)
     at com.sap.xss.hr.per.in.address.model.Hrxss_Per_Read_P0006_In_Input.doExecute(Hrxss_Per_Read_P0006_In_Input.java:137)
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
     ... 61 more
Edited by: KISHOR PONKSHE on Nov 7, 2011 11:37 AM

Hello Kishore,
Please remove the entry from the table V_T582ITVCLAS related to CL_HRPA_INFOTYPE_0006_IN
Then check.
Best Regards,
Deepak.

The definition of base class Application was not found.

Hello:
I have been coding in Flash Builder Burrito and publishing to my Xoom for a few weeks. All of a sudden at the end of the day I'm getting this compiler error which says:
1017: The definition of base class Application was not found. AppName.mxml /AppName/src Unknown Flex Problem
I sometimes hit the wrong key with I try to copy and paste and all of a sudden a new window will open for source of a default component which I never wanted to edit. I'm afraid I somehow deleted or modified the default class defnition of Application?
I don't understand why this would come out of the blue, I was working on a function within a class that was drawing points ... Then all off a sudden I'm getting this error and it's driving me nuts.
I tried to reinstall FB Burrito on my Mac, but after all that work it still says the same thing. Wouldn't it replace the default class defs?
Please help!

Wow, some really strange behavior.
OK, so here is what I'm going through. I reinstall, import the project and compiles.
Then I uncomment the new section which contains the following code:
lineStyle(1.0,0x8ea4bf);
var line_commands:Vector.<int> = new Vector.<int>();
line_commands.push(GraphicsPathCommand.LINE_TO, GraphicsPathCommand.LINE_TO, GraphicsPathCommand.LINE_TO, GraphicsPathCommand.LINE_TO);
var line_coord:Vector.<Number> = new Vector.<Number>();
line_coord.push(0,0, newW, angle, newW, (newH+angle), 0, newH);
drawPath(line_commands, line_coord);
I get 3 diffrent errors, which lead up to the error listed in the topic.
At first it says that "int" isn't a valid type and it points to this line:
var line_commands:Vector.<int> = new Vector.<int>();
Then I take int out so the line looks like this:
var line_commands:Vector = new Vector();
Then it says I can't nest classes and it points to the main MXML. I go to the main MXML then the error switches to say "The definition of base class Application was not found.".
I did figure out how to fix this with out reinstalling. I have to delete the project from my list (making sure to comment out the code above), then re-launch FB Burrito, then re-import the project and it works.
This is way nuts! I dont understand ... am I crazy?

Getting Error base class BitmapAsset was not found

I am converting a project using Away3D boomstick to the new FL11 version. I have installed the 4.5.1 SDK, dropped in the new away3d classes, added the flashplayer11_b1_playerglobal_071311.swc and now I get the following error.
Description Resource Path Location Type
1017: The definition of base class BitmapAsset was not found. Mercer-Molehill line 10 Flex Problem
Any Ideas? I really need to get this working for a demo tomorrow.

It seem the right playergloblal is not accessed. If You compile in Flash IDE make sure that ActionsScript Settinng is configure with the rigth paths.
The SDK 4,5 has change the name of flex.swc to core.swc and others files.
Flex 4.5 Framework Differences
flex.swc and utilities.swc were renamed to core.swc and authoringsupport.swc
The datavisualization.swc was split into charts.swc and advancedgrids.swc.
Path to sdk
I put all those SWC in a folder in C:\Program Files (x86)\Adobe\Adobe Flash CS5\Common\Configuration\ActionScript 3.0\flex_sdk\4.5\
Flash Actionscript settings. -> library path ->add the path till sdk
Configure globalplayer.swc. in Flash
in Common-Configuration/Player created a copy of FlashPlayer10_3.xml to FlashPlayer11.xml.
<player id="FlashPlayer11" version="12" asversion="3">
<name>Flash Player 11</name>
Finally
Flash Actionscript settings. -> library path ->add path till globalplayer
it work for me. ( tell me if I done wrong please).

Definition of base class ByteArrayAsset was not found

I was able to run through the developer guide to get several simple applications going, but I'm getting stuck when trying to compile a game (using amxmlc) that uses Flex-style embeds to embed bitmap graphics.
The error I'm seeing is this: (I've included input for completeness. I am located inside the project directory.)
===
> ../flex/bin/amxmlc -default-size 320 480 -library-path engine.swc -source-path+=. -- scripts/Main.as
Loading configuration file /Users/jon/Desktop/iphone/flex/frameworks/air-config.xml
scripts/MyAssets_SceneList.as(10): col: 49 Error: The definition of base class ByteArrayAsset was not found.
(Repeats 10 times)
===
As directed in the guide, I downloaded the latest Flex SDK and dragged in the contents of the iPhone packager directory. And to reiterate, I was able to get several simple applications working on my iPad, so my setup should be correct.
Where have I gone wrong?

I've narrowed it down further. Emebds DO work, but it's particularly an embed that leads to a ByteArrayAsset that does not. In my case, I am embedding an XML file as an octet stream.
Any ideas? Thanks!

Help - error: 1017: The definition of base class CairngormEvent was not found.

Hi.
I've inherited someone else's flex code. I need to make a small change re-complie and re-deploy, but the IDE (flash builder 4) keeps telling me there's an error in one of the.as files. Here's the details:
= Error:
1017: The definition of base class CairngormEvent was not found.
= Code:
package actionScripts.events {
    import flash.events.Event;
    import com.adobe.cairngorm.control.CairngormEvent;
    public class CairngormGeneralEvent extends CairngormEvent {
     [etc..]
Any ideas?
I'm using Flash Builder 4. Any help would be much appreciated.

check if the Cairngorm.swc is in the libs folder

Why do I get a "NullReferenceException was not handled by user code" error in one situation but not in the other?

We are using Sharepoint 2010 and Infopath 2010. In my form, I have a Managed Metadata field that I need to test for a Null value. I found, with the help of this forum's participatns, that a [field]_Changed event for one MMD field runs multiple
time because of the underlying XML elements (Terms, TermInfo, TermName, TermId). So I'm trying to figure out how to test the XML to see when the TermName has a value. By doing this, I hope to limit when the additional code in my form runs, i.e.
I'll only trigger it when TermName is not null.
Just to test for null/empty (before doing anything that calls the addtional code) when I run this code, it completes correctly but always shows a message box:
Dim strTest As String = Me.CreateNavigator.SelectSingleNode("/pr:properties/p:properties/documentManagement/ns2:h2b59c4ae4144c01973b1d8571d217ad", Me.NamespaceManager).InnerXml
            If String.IsNullOrEmpty(strTest) Then
            Else
                MessageBox.Show("This is the value of the States InnerXML   " & strTest)
            End If
But when I run this code, I get a "NullReferenceException was not handled by user code. Object reference not set to an instance of an object" at the "Dim strTest..." line:
   Dim strTest As String = Me.CreateNavigator.SelectSingleNode("/pr:properties/p:properties/documentManagement/ns2:h2b59c4ae4144c01973b1d8571d217ad/pc:Terms/pc:TermInfo/pc:TermName", Me.NamespaceManager).InnerXml
            If String.IsNullOrEmpty(strTest) Then
            Else
                MessageBox.Show("This is the value of the States InnerXML   " & strTest)
            End If
Can any one explain why drilling down like this gives me this error? And can you tell me how to get around it so I can limit how many times the code in my Infopath form needs to run?
Thanks in advance. Carol.

Never mind, I think I've got it figured out. When I do it this way, I get to the If Not...Nothing at the correct time. Thanks for sending me down the correct path, Scott. Carol.:
Dim
firstStr As
String =
String.Empty
Dim xNav
As XPathNavigator = MainDataSource.CreateNavigator()
Dim xFirst
As XPathNavigator = xNav.SelectSingleNode("/pr:properties/p:properties/documentManagement/ns2:h2b59c4ae4144c01973b1d8571d217ad/pc:Terms/pc:TermInfo/pc:TermName",
Me.NamespaceManager)
If
Not xFirst
Is
Nothing
Then
Dim strxFirst
As
String = xFirst.InnerXml
                MessageBox.Show(
"Value of InnerXML   " & strxFirst)
Else
                MessageBox.Show(
"Empty or Null")
End
If

Exception with the type CX_SY_OPEN_SQL_DB occured and was not handled

Hi Champs,
I am working on an interface which picks up file uploaded in a XI server and process it. The Function module used is a Z function module, developed locally.
I am uploading an tab limited file in XI server and a background job processes the file. The tab limited file contains Payelement Transaction ID as primary key. And after validation of elements like WBS element, cost center etc the file is posted using BAPI BAPI_ACC_DOCUMENT_POST. And all the Payelement Trans Ids are also replicated in a Z table, with there status viz. Success or Error or Warning.
After background job was completed, we found in Tcode SXMB_MONI that the file was in error.
The error message was :
Error during proxy processing An exception with the type CX_SY_OPEN_SQL_DB occurred, but was neither handled locally, nor declared in a RAISING clause The system tried to insert a data record, even though a data record with the same primary key already exists.
But to my dismay, I found that some of the Payelement Trans Ids were posted for a document and are also replicated in my Z table.
From the error it seems that we are inserting a record that is already there in the document. I have checked in for BAPI's input parameter, there is nothing duplicate.
Note: Insertion in Z table is made after the BAPI BAPI_ACC_DOCUMENT_POST.
Can you help me out in this issue as it is now getting into veins
Reagrds,
Nishant

Hi,
Even we have faced this kind of issue. In order to solve this just write the following code:
1) Before inserting records in to Z table, write one select query on that table with primary key fields in where clause. Pass the value that are returned by BAPI BAPI_ACC_DOCUMENT_POST to the key field.
2) If sy-subrc = 4, insert records in Z table else Continue and dont insert records in this table.
This will solve your problem.
Regards,
Prashant

DirectoryEntry.Parent.Name throw exception: The network path was not found.

I have very simple code to get AD domain name
Public Function GetDomainName() As String
Dim sDomainName As String = String.Empty
Try
Dim currentUser As String = WindowsIdentity.GetCurrent().Name.Replace("\", "/")
Dim strPath As String = String.Format("WinNT://{0}", currentUser)
Dim dirEntry As DirectoryEntry = New DirectoryEntry(strPath)
sDomainName = dirEntry.Parent.Name
Catch ex As Exception
Console.WriteLine(ex.Message)
Console.WriteLine(ex.StackTrace)
End Try
Return sDomainName
End Function
Here is exception that it gives:
The network path was not found.
, ,    at System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail)
   at System.DirectoryServices.DirectoryEntry.Bind()
   at System.DirectoryServices.DirectoryEntry.get_Parent()
   at Kofax.PrivateProfileData.clsNetSecurity.GetDomainName() in clsNetSecurity.vb:line 46
Do anyone help me what is the problem?
Is that my environment problem?
Thank you

This is not a recommended approach to get the domain name - also just to make sure do you intend to get the domain name of the computer or the user, if the later use DsCrackNames:
http://msdn.microsoft.com/en-us/library/ms675970(v=vs.85).aspx (p/invoke .NET version is available)
The DS_NAME_RESULT item struct contains the domain name the user belongs to in pDomain
Enfo Zipper
Christoffer Andersson – Principal Advisor
http://blogs.chrisse.se - Directory Services Blog

DirectoryEntry Invoke(SetPassword) exception: The network path was not found.

I have a local AD Machine with windows server 2003. Cloud AD is on Windows Server 2008 R2.
Problem is that when I try to create a new user through LDAP(C#), it creates succesfully, but Invoke(SetPassword) gives following inner exception:
System.IO.FileNotFoundException: The network path was not found. (Exception from HRESULT: 0x80070035).
code I am using is:
string szCloudUserPath = string.Format("LDAP://" + CloudDomain + "/" + "<GUID=" + CloudUserGUID+ ">");
var deUser = new DirectoryEntry(szCloudUserPath, CloudAdmin, CloudPwd, AuthenticationTypes.Secure);
deUser.Invoke("SetPassword", new object[] { szNewUserPassword });
deUser.CommitChanges();
Anybody can help me please?

Hi,
Based on your description, the following thread focuses on the similar issue and can be worth taking a look.
DirectoryEntry.Invoke SetPassword - The network path was not found.
http://forums.asp.net/t/1164221.aspx
Besides, I notice that you have post the same thread in the ASP.Net forum. In my opinion, regarding this issue, we will get more professional help in that forum.
Best regards,
Frank Shen

I have a powerpoint that I created on PC. I downloaded "Slideshark" to convert it so I can play it on ipad. Worked well, EXCEPT for the music was not embedded. Can anyone help me to find out why the music is not attached.

I have powerpoint that I created on my Pc. I downloaded "slideshark" to convert it so i can play it on my ipad. Everything was great (fonts, animations, colour) EXCEPT the music did not come through..What is the reason for this??

Perhaps you should ask the developers of the app you used to convert this presentation?

Compilation error: "The definition of base class Application was not found."

Hi,
I imported my Flash Builder 4.6 project to the 4.7 pre-release version. My application use a CustomSystemManager (in order to force the loading of a "TextContainerManager", I'm using latest TextLayoutFramework 3.0.0.29).
I had no error with previous versions (Flex SDK 4.5 and Flex SDK 4.6).
My application is main.mxml :
<myapp:MyApp>
</myapp:MyApp>
myapp/MyApp.as :
package myapp {
          import spark.components.Application;
          [Frame(factoryClass="skyrockchat.CustomSystemManager")]
          public class MyApp extends Application {
        public function MyApp() {
          super();
myapp/CustomSystemManager.as :
package myapp {
          import flashx.textLayout.container.TextContainerManager;
          import mx.managers.SystemManager;
          public class CustomSystemManager extends SystemManager
                    public function CustomSystemManager()
                              var c:Class = TextContainerManager; // force the inclusion of this class
                              super();
If I right click on the "Application" word and then "Open declaration", the correct class from spark.components is opened...
I don't know if this is a bug or a side effect... ^^

The packages of the CustomSystemManager don't seem to match:
[Frame(factoryClass="skyrockchat.CustomSystemManager")] has "skyrockchat" as the package and another place says to put CustomSystemManager in package "myapp".
myapp/CustomSystemManager.as :
package myapp {
When I changed "skyrockchat" to "myapp" the project compiled.
-Darrell

An exception of class nilobjectexception was not handled (Photoreflect)

Similar Messages

Maybe you are looking for