An extension number for internal communication

dear sir,
We have both same ip addressing iptel network in 2 company but different did numbering . Company A with 111XXXX and company B with 222XXXX. Any one have any idea how to create an extension number for both company to communicate?
Thanks.

You can set everyone up on a 4 digit dialing plan since you have non-overlapping DIDs. Then setup a Translation pattern for each side.
Company A's DID are 444-2000-2999
Company B's DID are 444-3000-3999
In Company's A CCM, setup a Translation Pattern for 3xxx ---->94443xxx So when company A dials 3xxx, it automatically prepends the 3xxx with the outside line and the local exchange to the DID. It creates the "sense" of a 4 digit extensions between two seperate sites.
In Company's B CCM, do the same Translation pattern, but setup 2xxx ----->94442xxx This should help you create one number then.
Does this help?

Similar Messages

Service Integration for Internal Communication

I created a Service Integration for Internal Communication to send Opportunity data to my custom BO in a separate deployment unit. I've gone through the documentation and all the steps, but I don't understand how to get the A2A to actually send the data. Do I have to call it in a script?
I'd love to see some more documentation on A2A scenarios for communication to separate deployment units, because I need help.

Hi,
can you post how you got it ?

Wrong internal order number for internal number range

Hi,
I have created an internal order type and assigned the internal number range 450000-459999. When we checked the numbers given for the system there are missing numbers. For example; the numbering is OK up to 450013 numbered order and the next order has 450020 number, and next one has the 450040
number.
I checked the COAS table and there are no number used by any other order. What can be the reason for this situation? How can we fix the problem? Is there any one who face the same problem?
What are your suggesitions...
Thanks in advance
Ahmet

Hi,
I have similar kind of query. How to use the numbers that the system jumped? Is there any record/history of unused numbers present in any table? Thanks in Advance!
Regards,
Nidhi

DNS cluster address additions for internal communication

Hi Guys,
          My understanding is that WL cache's DNS address of the cluster, and removes
          'dead' cluster members.
          I imagine that this means that if I use:
          ic = new InitialContext("t3://myclusteraddress:7003");
          and I have myclusteraddress mapped to 10.0.0.1 and 10.0.0.2 that all will be
          well with the world?
          And if 10.0.0.1 goes down, all will still be well?
          What happens when I dynamically add a server to such a cluster? As the
          DNS doesn't get read again, cos
          it's cached, what happens? Is there some magic that goes on behind my back
          perhaps involving multicast of
          new servers that updates the "DNS cache" so that the new server is included?
          For external clients, I understand the problem, and the need for a hardware
          load balancer or the like that
          can detect failure and not return dead DNS servers. Qustion: Can I emulate
          this using a piece of software?
          Regards,
          Q


As requested:
// Include keys file
include "/etc/rndc.key";
// Declares control channels to be used by the rndc utility.
// It is recommended that 127.0.0.1 be the only address used.
// This also allows non-privileged users on the local host to manage
// your name server.
// Default controls
controls {
inet 127.0.0.1 port 54 allow {any;} keys {
"rndc-key";
options {
directory "/var/named";
recursion false;
* If there is a firewall between you and nameservers you want
* to talk to, you might need to uncomment the query-source
* directive below. Previous versions of BIND always asked
* questions using port 53, but BIND 8.1 uses an unprivileged
* port by default.
// query-source address * port 53;
// # Adding this...
forwarders {
151.164.8.201;
151.164.1.8;
forward first;
// # to here..
// a caching only nameserver config
zone "." IN {
type hint;
file "named.ca";
zone "localhost" IN {
type master;
file "localhost.zone";
allow-update { none; };
zone "0.0.127.in-addr.arpa" IN {
type master;
file "named.local";
zone "" IN {
file ".bak";
masters {
type slave;
zone "kccompany.org" in {
file "kccompany.org.zone";
type master;
zone "200.168.192.in-addr.arpa" IN {
file "db.192.168.200";
type master;
zone "xxx.207.64.in-addr.arpa" IN {
file "db.64.207.xxx";
type master;
logging {
category default {
defaultlog;
channel defaultlog {
file "/Library/Logs/named.log";
severity info;
print-time yes;
};

TS4268 I am being charged for international msgs which i haven't sent to a number of the UK.i tried to activate my iMessage and FaceTime using wifi but then it didn't connect. all settings have been turned off but my acc. is being charged.what to do?

I am being charged for international msgs which i haven't sent to a number of the UK.i tried to activate my iMessage and FaceTime using wifi but then it didn't connect. all settings have been turned off in my phone! i also have reset my phone with all the settings. but when i contacted my carrier, he said that the balance deduction is because of the international messages i have sent, but i have sent NONE! every time i switch on my phone, balance gets deducted. imessage and facetime are all disabled! but then the problem started since yesterday when i tried to activate them but had disabled them all at the next moment! but the charges are still being applicable for some international messages as per my mobile carrier. what to do? is there some problem with my phone or carrier?

I am being charged for international msgs which i haven't sent to a number of the UK.i tried to activate my iMessage and FaceTime using wifi but then it didn't connect. all settings have been turned off in my phone! i also have reset my phone with all the settings. but when i contacted my carrier, he said that the balance deduction is because of the international messages i have sent, but i have sent NONE! every time i switch on my phone, balance gets deducted. imessage and facetime are all disabled! but then the problem started since yesterday when i tried to activate them but had disabled them all at the next moment! but the charges are still being applicable for some international messages as per my mobile carrier. what to do? is there some problem with my phone or carrier?

Error while detrmining Internal Document Number for Excise Invoice.

Hello mate, I am trying to create excise invoice for for factory sale. while saving the document I am getting an error" Error
while detrmining Internal Document Number for Excise Invoice. Message: Maintain Number Range for J_1IINTNUM". I have already maintained number range for mentioned object "J_1INTNUM" in TCODE SNUM , still getting error. Please solve my querry . Is it related to transport or number range activation or something else? I have maintained number range with serial no. "01"

Hello ,
Ensure that number ranges are properly maintained in the respective client that should be the year specific.Some times even u maintained the system should not consider that number ranges due to table updation problem ,because i had faced the same in the earlier and received the reply from the sap stating that this error was occured rarely after the years,so please ignore that ,for your problem u first come out of the screen and then re log in and then create the excise invoice ,then check the number ranges .
Please revert for any
Kalyan

How to show the internal batch number for order in make to order scenario

Hi !!!
Gurus!!
I am working on make to order scenario .For delivery of order may I see the batch no.of esch order.
How system will get the internal number batch.
I have config. batch management.
What should be the next process.
Regards,
Nitin

Hi,
QI am working on make to order scenario .For delivery of order may I see the batch no.of esch order.
A. Yes you can see batch number for each order
QHow system will get the internal number batch.
A. there are two possiblities assign you batch number at production order before release or assign batch or each GR at the time of executing GR transaction.
QI have config. batch management.
A.In Material master you also have to tick for batch managemnt relevency
QWhat should be the next process.
A. Consult again if any thing missing
Regards,
Syed

Maintaining Number Group for Internal Challan

hi experts,
while configuring the J_1IEWTNUMGR_1 table views and entering the number groups for internal challan numbers Ewt india
am getting an error
" Entry BP01 BP10 does not exist in SEC CODE check your entry"
BP01 is the company code
BP10 is the sect code
could you all please help mw on this...

Hi
Dont use J1INMIS use the following below to get TDS Decut/Certificate:
1. J1INCHLN
2. J1INBANK----
In this Bank No will be given cheque Issue Account No.
3, J1INCERT----
In this document date should be end of the month date i.e, example 31/10/2011 etc....After giving all the details save it. yoy will notice below the screen Variant.
Given the variant name xxxxx
Descp xxxxxxxx
Save it
Thanks
Anil

Error in J1INCHLN for internal number range

Dear Experts,
I am getting the below error when I am executing J1INCHLN. I checked J1INUMBER but of no use. Number range for 2008 is maintained. I am not able to maintain number range for 2009. Kindly guide.
Number range for internal challan numbers not maintained
Message no. 8I706
Diagnosis
Number range object 'J_1ICHLNNO' is not maintained fully.
System response
There is an error in the number range object and a new internal number can not be generated.
Procedure
Check if the number range object exists in your system and also check if number ranges for the number group is maintained for the current year. Maintain the number range object and then start this transaction. The transaction code for the number range maintenance is 'J1INUMBER'.
Regards
Komal

Hi
Go to SPRO>IMG>Financial Accounting (New)>Financial Accounting Global Settings (New)>Withholding Tax>Extended Withholding Tax>Posting>India>Remittance Challans>Maintain Number Groups
here define - cocode , section , tds section code , number group
now go
SPRO>IMG>Financial Accounting (New)>Financial Accounting Global Settings (New)>Withholding Tax>Extended Withholding Tax>Posting>India>Remittance Challans>Assign Number Ranges to Number Groups
here assign number group to Number range
now create number range go to SPRO>IMG>Financial Accounting (New)>Financial Accounting Global Settings (New)>Withholding Tax>Extended Withholding Tax>Posting>India>Remittance Challans> Maintain Number Ranges
here create a number range on year base
**some time you have to update the table so go SM30 and update J_1IEWTNUM , J_1IEWTNUMGR and J_1IEWTNUMGR_1 tables
Best Of Luck
Tanmoy

Configure internal number for document in "depreciation run"

Hi Experts!
When I execute "Depreciation Run", it notice error:
Create document number range 03 using internal number assignment
Message no. AA776
Diagnosis
Processing terminated because the document number range 03 for year 2008 was set up with external number assignment.
System Response
For periodic posting of depreciation, you have to create a document number range with internal number assignment, since the document numbers are assigned from Financial Accounting.
Procedure
Change the number assignment for the number range 03 from external to internal in Customizing for Asset Accounting. See SAP Note 890976 for more information.
Please tell me the way to configure internal number for document in "depreciation run"
Thanks & Reguards
Ngocpt.

Hi,
Go to transaction code FBN1
In the change option go to document range 03. IF its an external number assignment there is a tick in the box " ext".
If you want to change it to internal you just have to remove the tick.
Before doing so please check the document type used fo depreciation and the corresponding number ranges assigned.
Hope this helps.
GU

New Hunt Pilot for internal number is not working.

Hi support, I have a problem with the new hunt pilot number that created for internal use is not working. I had create 1 internal number (1090) for the Hunt Pilot number, and there are 2 hunt group member (9382 / 9387). These number will forward all to the mobile number 9382 will forward
all to 90176253579 9387 will forward all to 90133921295 Calling from 1941 to 1090 resulted failed but calling from 1941 to 9382 working and the call forwarded to mobile 90176253579. What might be wrong with the 1090 where i can't call that number from internal. From the DNA, it shows the call should reachable to the destination. I attached the DNA result for your reference.

Hi Mohd Afadzal,
Forwarding setting do no apply for Line Group members. As you mentioned that the Line group members
(9382 / 9387) are configured to forward all calls to their respective cell phones, this will not work.
You can use the HuntPilot's Busy or No Answer configuration to forward calls to an alternate number.
HTH,
Jagpreet Singh Barmi

FAGLL03-GRN number without extension of item number for few documents in Le

In GR/IR account 31901 and 31903, Ref. Key 3 field has shows the year & GRN number without extension of item number for few documents in Ledger view(FAGLL03). But, if we go through the entries for the same in document display, it will shows with extension numbers, due to this reason auto clearing is not happening for these documents through F.13. Please help.

PO number at the item level of sc or at the header level of the sc next to description
Such requirement is going to be difficult to achieve because not only one SC could yield multiple POs, but one SC item could potentially have multiple follow on POs. It's not always a 1:1 relation that can simply be presented in a table row. That is one of the main reasons one separated tab is dedicated to follow-on document.

FAGLL03-GRN number without extension of item number for few documents

In GR/IR account 31901 and 31903, Ref. Key 3 field has shows the year & GRN number without extension of item number for few documents in Ledger view(FAGLL03). But, if we go through the entries for the same in document display, it will shows with extension numbers, due to this reason auto clearing is not happening for these documents through F.13. Please help.

Hi Dear,
Thanks for reply....
I use this code, in the LOOP AT ITAB...
      IF bseg-ebeln = ' ' AND bseg-KOART eq 'K' .
        itab-lifnr = bseg-lifnr.
      ENDIF.
But, not working....means its not displaying Vendor name against Document Number in BSEG.
Plz let me know...How...where i can change,,,

External Alphanumeric Number Range for Internal Orders

Hello,
I am trying to create external number range for Internal Order Type. I want to create internal orders which will have internal order number as alphanumeric and some will be in only numbers.
How should be the range look like, so that I have flexibility to enter Internal Order number as whatever format I want i.e. T123, 12MP, 1234, ABCD etc.
Any help will be appreciated.
Thanks.

how many do you need?
Just one, that covers all?
a0000000 - zzzzzzzz

Is there a way for this community, to make a suggestion to Apple to include blocking a specific contact number calls and messages just as other phones provide that feature for their users.

Is there a way for this community, to make a suggestion to Apple to include blocking a specific contact number calls and messages just as other phones provide that feature for their users.

No phone provides true call blocking. At best, they provide call diversion. Essentially, the call is answered and disconnected automatically. If I recall, Apple is adding call diversion features in iOS 7.
Best of luck.

An extension number for internal communication

Similar Messages

Maybe you are looking for