An extra field in a Report
Hi all,
I have a requirement to add an extra column to an existing BW report in BEx on a cube.
The query now displays the country, material, inventory amount in stock and the value of inventory in USD. The new column should have the inventory value converted in to the local curency.
Any suggestions are appreciated. Thanks.
You can use the standard BW Curreny conversion for getting the new key figure in local curreny. Check the links below:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/287bab90-0201-0010-f48e-cc55b0cd13d0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5ff89c90-0201-0010-5a94-8e99f0bf799b
Thanks.
Similar Messages
-
Column Headings in the report and adding an extra field to the report
Hi All.
I had an issue like i need to put column headings for a report and I want to add an extra field to the report.
The problem here is that the report was actually cloned from a Query.At the time of cloning,they forgot to add the column headings.
Now we need to add the column headings for the same.How can we proceed for this and where we need to add our code?
How to add an extra field to the existing report?
Any pointers will be very much helpful.
Regards,
SSR.Hi,
you can get this done in 2 ways:
1 - Change the query to add another column and the re-generate the report
2 - If changing query is not possible, you can change the report it self for adding extra field. If you look at the code, it will be more like normal ABAP code. you can easily modify it (If you are ABAPer) for your additional requirements.
thnx,
ags.
Edited by: Agasti Kale on Jun 12, 2008 6:26 PM -
Insert extra field in ALV report
Hi All,
Ive requirement like need to add Vendors Country Code very next to Tax code field in standard SAP standard ALV report S_ALR_87012357 .
Ive copied program (RFUMSV00) into z-program.
But Im not getting any idea how can I add extra field in field catalogue and corresponding value in internal table.
Any ideas please ..
Full points will be rewarded for useful answersI didn´t understand the question very well, but if i am in certain, you will have to modify the internal table to add the field. If the table which shows the alv is like a data base type, you will have to modify this in this way:
data: begin of gt_table occurs 0,
include structure ,
new_field type XXXX.
data: end of gt_table.
Then, you will have to add this new field to the field catalogue, in this form:
ls_catalogue-fialdname = 'NEW_FIELD'.
ls_catalogue-tabname = 'GT_TABLE'.
etc...
Luck in your requeriment.
ls_catalogue-tabname = 'GT_TABLE'.
etc...
Luck in your travel. -
Need to add extra field in BEX report
Hi Experts ,
I have a problem in bex report.
scenario is like this--
APD will generate the BPS Daily report on Branch, Group, Area, Region and total company levels and then exports into a flat files stored in appserver
and i got the requirement to change the layout of the report. The client wants to need the one field extra ie. 'REPORTS RUN DATE '
and i am stuck here how to add this field in my report ..
Please help me ASAP.
Thanks a lot in advance
Saurabhhi,
Enhance your APD and in the target add field REPORTS RUN DATE .
Fill this using ABAP routine which populates the sy-datum in this field.
regards,
Arvind. -
Addition of extra fields in Standard report
Hello Friends,
I just wanted to add some extra fields in the standard report MB51, MB52 & MC.1. I wanted to add some of the fields from Basic data1 & 2 screen.
is there any method to do this.
Regards
ACPDear
Please check the folloiwng :
For MB51/MB51 -Additonal field : SAP note 357187
Refer this useful theard from expert : Re: req additional fields in MB51
Regards
JH -
Need extra field in S_ALR_87013611 report
Hi There,
I want to modify report S_ALR_87013611. I want to add one column for object currency.
I think S_ALR_87013611 reports using planning layout 1-157 (standard report).
I want to customize this standard report and create variant for users so they can have extra object currency field in report.
can any one suggest me how can i add custom planning layout to S_ALR_87013611 report.
Thanks in Advance.For you to know that kind of technical information, go to the report transaction code S_ALR_87013611. Here, in the menu goto Environment -> technical information. This will give you all the needed information. In this case, library would be 1VK.
Also, go through this document. It will cover a lot of topics regarding report writer and painter.
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
http://sapdocs.info/wp-content/uploads/2008/11/report-painter.pdf
Shail -
Adding extra fields in S_ALR_87012085 report
hi,
i want to add two fields in vendor ageing report t code S_ALR_87012085 report.pls help.Hi Sudip,
S_ALR_87012085 is the transaction that is called. Within this transaction, the report RFKOPR00 is called.
You then could copy or modify this report and add the fields you need.
Regards,
Marc -
How to add an extra field in the output of a predefined report
Hi everybody,
I have to add an extra field by name "DAYS"(VTBFHAPO-ATAGE) in the output of a predefined report" RFTMBL01".
please provide me the code and where to add in the predefined reportHi Pasquale Isolato
the predefined alv report name is "RFTMBL01" . If u r with system please check the code and the field name i have to add ids"DAYS'.
if u are not with system please reply me so that i will sen the code also
Thanks in advance -
Adding an extra field in customer statement report
Dear all,
We are on SAP B1 2007 PL42. How can we add an extra field eg a UDF on a customer statement in PLD? The system's customer statement have all fields as "free Text".
Kind Regards,
AsifHi,
I have created a free text field in PLD- named Field_101. I have also created a database field from the OINV table and referenced to the UDF "U_FileNo" named Field_102. On field_101 I have linked to Field_102 but on previewing the report the field is empty/blank.
Thanks
Asif -
Extra Field gone after reopening a saved Report
Hi all,
Maybe it is a stupid question but when i have builded a report with the wizzard and i add a extra Field and i save the report as a rdf. The next time i open the saved report the extra Field is gone.
Does anybody know why?
Thanks in advance,
DanielThe Fields are present at the object navigator. But i know what the problem is(i guess); sometimes i saved the report with the added fields and after that i try to run the report and suddenly the Reports Builders exits.. normally i restart the Reports Builder and then i am lost the Fields although i saved the reports before.
What i did is:
- create the fields manually
- saved the report
- exit reports builder
- start reports builder
- opened the saved report
and the fields are still there(in the object navigator and in the paper report) ;-) !
Thanks for your support,
Daniel -
Can we add extra field in drag and drop reports
Can we add some extra field in sales A/R drag and drop report
Hi
My understanding about the drag and
related function is:
Since Drag and Relate is a query based system, you can
recreate the Drag and Relate query/result in the Query generator. From
here you can save the query and access it through the Tools -> User
Queries. You can also create your own reports through Tools -> User
Reports.
If you get a 'no matching records found' error whene using D&R,
it means the user has created a wrong relation.
i.e. use the BP code instead of the BP description etc.
Note! Users with a full authorization to the Drag & Relate function
can view any data in the system, similarly to a case where a full
authorization is given to regular queries. Therefore, it is recommended
not to assign regular users with a full authorization to the Drag &
Relate function.
Please have a careful read of the documentation to apply the
functionality to your needs.
Furthermore, we could do the following testing:
e.g. create a UDF on sales order
and create two sales orders with the
same UDF value, e.g. ABC
then we drag the UDF ABC to the sales order , we could get the list of
these two sales orders.
Could you also let me know your detailed requirement for this functionality?
Best Regards
Helen Sun -
Extra field on Stock In Warehouse Report
Hi Experts,
Is it possible to add an extra field to the Stock In Warehouse Report? I want to show the Item's Sales Weight, but when I add the field, the weight of the first item is just repeated for every item.
I have had to use Alt & Shift to access the table OITM table.
Thanks
Greighi greig,
Have u entered item description in foreign language in item master ?
You can add UDF to standard reports like Stock in warehouse report ?
Reports are linked with PLD dynamically,U can't link datbase field in PLD template,Report is linked internally with free text.
Better develop query based report(ie. Query Print Layout designer).
Jeyakanthan -
How to add new fields to standard reports
hi friends,
im into ABAP and working across all modules..the basic thing is users and functional people are not satisfied with the standard reports..they need some logic change or to add some more fieldsinb the standard reports.For logic change we have to copy the standard to zprogram and can do or create a new program itself..but in many cases they ask for extra fields.how to achive it ..
for example my requirement now is adding vendor name field to the report FAGGL03 ....i found a badi and have make changes to it ...now the vendor name will be coming in sgtxt over writing the text ...but they need text also...now what shall i do???
append structure vendor name field in faglposx table ....???how to find out the final internal table from where the output is coming ????
?when we check the standard rewport codes...there are lot of include statements perform statements etc ...how to find out the final structure or internal table which has the output values..???hi
it would be better if u giv full name of the report
if ur displaying the data in alv then search for the
word REUSE_ALV_LIST_DISPLAY REUSE_ALV_GRID_DISPLAY from which u can get the final table name
then check the data that is comming into
try using implicit enhancement or any other exit in the declaration and declare a new structure with the field and append it to the field catalog
if ur displaying the data using write statement
then create a zprogram and add a write statement
fi ur unable to find here the final table then after displayign the report start the debugging and double click on any row to find out more easily
shiva -
Need to add Purchase Order field in Standard report in report painter
Hi Gurus,
I have a requirement to add an extra field in Cost center:Act/Plan/Comm CC Cur report.This is otherwise a Z report in report painter with 0% code (T-code : GR55-> Report group->Report).But,when we go to technical information of this report,it has four standard sap programs,which contains code for this selection screen.It does not even have a modification scope.
Selection screen of this report contains following parameters:
Selection values:
Controlling Ar
Fiscal Year
From Period
To Period
Plan Version
Selection Groups:
Cost Center Group
Or value(s)
Cost Element Group
Or value(s)
My requirement is to add one more parameter : Purchase oeder in new block:
Is there any way to achieve it.
Note: Copying the standard progs into custom prog is not working,i already tried that.
Please let me know your suggestions,if any one of you came across such requirement before.it is very impoertant for me.
Thanks in advance,
MeenakshiHi Subramaniyam,
You can find enhancement in me28 by following steps and then apply your logic in include of this enhancement.
cmod>Give a project name>in enhancement column give the package name ME >f4>in package write ME-->ENTER>It will show you all enhancements available in me28> find which ever suits your requirement>save > click on components> from there you can make changes in include program.to add that particular field. -
Hi there,
I added a column to an existing alv report which uses method 'set_table_for_first_display' to display the output.
The method is called via:
grid1 TYPE REF TO cl_gui_alv_grid,
CALL METHOD grid1->set_table_for_first_display
EXPORTING
i_structure_name = 'MAT_DATA'
is_layout = lt_layout
is_variant = lt_variant
i_default = lt_default
i_save = 'A'
it_toolbar_excluding = lt_exclude[]
CHANGING it_outtab = mat_data[]
it_fieldcatalog = w_fieldcat[]
EXCEPTIONS
program_error = 1.
The extra columns are in the field catalog and mat_data.
The lt_variant-report field has the report name in it.
When I run the report the new column does NOT appear.
I cleared out the lt_variant-report value and now the new column DOES appear.
Any idea why this is happening?
Is there some way I can leave the report name in there and see the new columns?
Thanks.thanks.
no_out is initial.
But, in this case, I am not passing any variant.
It works if I don't pass the report name in the
is_variant-report
field.The columns will not display if I pass the report name.
Maybe you are looking for
-
My iTunes syncs with my iPod but the songs do not show up on my iPod after.
I'm not really sure how to go about fixing it either, as iTunes says that the songs have all synced with my iPod. Any suggestions? D:
-
Sapevt and file adapter using ftp
Hi; Using the file adapter, I ftp a file to our SAP R/3 system called T01 (=SID). Target directory //T01/010/OCS/TC/IN File name scheme: wka.dat I specify in "Run Operating System Command After Message Processing" sapevt WKA -t name=T01 nr=01 WKA is
-
ISE no redirect to origin URL after guest login
Hi, is there a possibility to redirect a guest user to the origin URL after he logged in successfully? Right now the attached file is what the user sees after login. Thanks!
-
Help please! Another Finder Error
Hi, The script below is designed to backup files from the source area to the backup area preserving the folder hierarchy. While I’m sure it could be written better, it seems to work until it encounters a particular folder containing a file, when I ge
-
My mac can't connect to my time machine for backup
My mac wont connect to the time capule for backup - any ideas why this may happen and how to fix?